SPECIAL REPAIR TO BLDG NO T-46 OF 115 INF BDE CAMP IN MORAR CANTT, GWALIOR UNDER GE GWALIOR

Amount

Demolition of cement concrete (un reinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Dismantling timber scantling 40 Sqcm and over in section, in any position in Framed work complete all as specified and directed.

Roughening of old concrete surface by paking, sweeping, cleaning and washing down with water to remove dust etc complete all as specified and directed.

Dismantling of floor, hearth or wall tiling incl cement mortar bedding (but not backing) ,removing serviceable tiles to store and rubbish of the premises complete all as specified and directed.

Dismantling of asbestos corrugated sheets(corrugated/semicorrugated) in roof covering including ridges complete all as specified and directed..

M&L for moorum/red bajri filling in floors or pavings, laid in layers not exceeding 15cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for hard core of broken stone or boulders guage not exceeding 63mm deposited, spread and leveled in layers not exceeding 15cm thick and rammed to a true surface complete all as specified and directed.

M&L for cement concrete type E2 1:5:10 (using 40mm graded stone aggregate) as in sub base of floor or sunken floor etc complete all as specified and directed.

Supply and Fix rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe-410-W complete all as specified and as directed.

S&F 0.50 mm thick pre -painted galvaltume aluminium zinc coating GI based corrugated steel sheet of an colour haviing tensile strength of 550 Mpa as in roof covering /cladding to wall,fixed with self tapping screws as specified colour complete all as specified and as directed.

S&F 0.50 mm thick pre -painted galvaltume aluminium zinc coating GI based plain steel sheet of an colour haviing tensile strength of 550 Mpa as in roof covering /cladding to wall,fixed with self tapping screws as in ridge specified, colour complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement plaster 1:6, finished even and smooth (without using extra lime or cement) complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement plaster 1:4 and mixed with WPC , finished even and smooth (without using extra lime or cement) complete all as specified and directed. (Note:- WPC shall be measured & paid seperately).

Dismantling of AC ceiling board fixed with nails complete all as specified and directed.

M&L for suspended for ceiling system using Chicago metallic ( E grid) exposed suspended system of grid/section size 600x600mm comprising of GI powder coated main 39x24x0.8mm thick (thickness comprising of GI/0.40+PPGS/0.3) cross TEE 29x24x0.8 mm thick and wall angle 22.2x22.2x0.65 mm thick with and including 4 mm thick HPSC prep rimed self embossed texture design board to be placed in the grid system duly suspened with 6 mm dia GI wire hangers fixed with steel door fastness or from perlin of the roof with clip complete all as specified and directed.

Taking down chowkhat frame with shutter (without taking out shutter from the frame) n.exc 1.50 Sqm each complete all as specified and directed.

S&F solid PVC doors frames of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube in opening as per specification and drawing as specified in clause 8B-1 to 8-B-10 on page 133 to 138 and page 146 to 153 of SSR -2004 part-II complete all as specified and as directed.

S&F factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC`C` channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles ad plain colour PVC sheet for top rail, lock rail & bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stile & rails suitable PVC sheet beading and jointed together with solvent cement and fixing in the frame complete all as specified and shown on drawings on page 133 to 153 of SSR -2004 part-II .

S&F PTMT butt hinges 100 mm complete all as specified and directed.

S&F PTMT handle 125mm complete all as specified and directed.

S&F PTMT tower bolt 200mm complete all as specified and directed.

S&F for box type steel window with side hung shutters (double shutters for glass and gauze) joinnted together with and including grill using 10 mm square bars @ 10 cm C/C as per TD No CEBZ/TD/14/2011 including box type hunges with steel handle and steel peg stay complete with glazing bars devetailed and welded complete all as specified and as directed Note : Glass/gauge shall be measured and paid separately der respected item as supply and fix complete all as specified and as directed.

S&F for steel ventilators with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

S&F for 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pan complete all as specified and directed.

S&F figured glass, pin head type 4mm thick and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F for galvanised mild steel wire cloth 0.46 nominal dia of wires and average width of aprature 1.18mm and fixed with tinned tacks galvanised wire staples fixed including a coat of french blue paints complete all as specified and directed.

M&L for non skid ceramic tiles, joint free, coloured tiles 7mm to 8 mm thick (Square or rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile laid over and including 15 mm thick screed bed or bedding layer of cement mortar (1:4) complete all as specified and directed.

M&L for ceramic tiles, joint free, coloured tiles 7mm to 8 mm mm thick as in skirting fixed over and including 10 mm thick cement screed in (1:3 ) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.with the colour of tiles complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surface 350mm x 250mm x 7mm/ 450 x 350 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, aid over and including rendering 10 mm thick on fair faces brick work or concrete surface in cement plaster 1:3 complete all as specified and directed.

M&L for 40 mm thick PCC 1:2:4 type B-1 (20mm grade aggragate) as in floor finish complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar incl all quoins, arches, pillars etc but excluding ashlar facings dressed stone work and precast concrete articles complete all as specified and directed. .

M&L for brick work with fly ash old size bricks, straight or curved on plan to any radius in half brick thick walls built in Cement Mortar 1.4 complete all as specified and directed.

M&L for 75 mm thick Cement concrete type C1, 1:3:6 (using 20 mm graded stone aggregate) as in plinth protection incl finishing the surface even and smooth w/o using extra cement complete all as specified and directed.

Taking down Chowkats or frames exceeding 1.5 Sq. M but not exceeding 4 Sq. M each (Without taking off shutters from the frame) complete all as specified and directed. .

S&F for pressed steel frame of size 125 x 60 mm for door with one or more rebates makaing necessary fixing lugs,higes, lock strike plate, etc, complete, as specified, complete all as specified and directed.

S&F for pressed steel frame of size 105 x 60 mm for door with one or more rebates makaing necessary fixing lugs,higes, lock strike plate, etc, complete, as specified, complete all as specified and directed.

S&F for 35 mm thick factory made shutter, Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F for 35mm thick factory made glazed and skelton shutters 2nd class HW open rebated and prepared to receive gauage (with sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred bead or security glass etc. Size of members of shutters as specified in IS-1003 supplied and fitted to chowkhats complete all as specified and directed.

S&F for 100 mm butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F alumunium handle cast type anodised 150mm long complete all as specified and directed.

S&F 200mm long alumunium anodised barrel tower bolts of extructed section complete all as specified and directed.

M & L for machine cut Kota stone slab 18 to 20 mm thick and min size of kota stone shall be 550x550 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete as in kitchen floor over and incl 20 mm thick screed bed in CM 1:3( In steps/stair cases full kota stone of size making to full length and width of steps alongwith three grooves)

All as per item No 43 above but on skirting over 15 mm thick cement plaster 1:6 complete all as specified and directed.

Dismantalling water tank and removal from site 500 ltr complete all as specified and directed. .

M &L for rotational moulded polyethene water storage tank 750 ltre (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

Taking up or down steel tubing and connection incl cleaning for refixing or removal to store of 15 mm bore complete all as specified and directed.

Takingup or down steel tubing and connection 20 mm bore incl cleaning for refixing or removing from site complete all as specified and directed.

M&L for water tubing medium grade 15 mm bore with all fitting and fixed complete to walls and ceiling or laid floorstubing and connection incl cleaning for refixing or removal to store of 15 mm bore complete all as specified and directed.

M&L for GI tubing 20 mm dia medium grade galvanised with all fittings fixed to wall and floor complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints, fixed to walls/ laid in trenches and floors complete all as specified and directed.

M&L for applying treatment on exposed roof portion incl. beams, chajjas, slab etcas under- (a) Removing all loose concrete elements & applying acid wash & applying Cement slurry mixed with Nitobond/tapcrete all as spd (b) Inserting drilling holes in the wall /beam by 10mm dia bars & tuck welding with existing reinforcement @ 0.50m c/c ,nailing wire fabric 50x50 mm in the complete area all as spd (c) M& L 15 mm dubbing coat in CM1:2 mortar mixed with Nitobond /Tapcrete@ 2% by weight complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed

M&L for 60 mm thickness rubber moulded machine pressed precast concrete interlocking paver block M-35 any shape and size, confirming to IS 15658-2006 in grey cement glossy finish rubber mould casted laid dry over sand cushioning complete all as specified and directed.

S&F in repair vitreous china squatting pan "(Orrissa" pattern) size 580 x 440mm white with integral foot rests (excluding flushing cistern and flush pipe ) complete all as specified and directed. Make:- Prayag/Pearl/Parryware/Hindware

S&F in repair PVC flushing cistern 10 Ltrs capacity including all fitting flush pipe etc complete all as specified and directed. Make:- Prayag/Pearl/Parryware/Hindware

S&F for, in repair, vitreous china wash and basin, white or coloured, flat back, size 550 mm x 400 mm fixed on existing bracket, including fixing of taps, waste fitting,pipe and union complete all as specified and directed. Make:- Prayag/Pearl/Parryware/Hindware

S&F for, in repair, PVC connections 15 mm size with PTMT nuts of length 450mm long complete all as specified and directed. Make:- Prayag/Pearl/Parryware/Hindware

M&L for cutting out cracks to V section in existing walls, roofing or terrace, cleaning out wetting grouting with cement and sand slurry 1:3 complete all as specified and directed.

M&L for reinforced cement concrete (Nominal Mix) type B-1 1:2:4 (using 20 mm graded stone aggregate) as bond of size 300 mm X 230 mm X75 mm thick complete all as specified and directed.

M&L for mild steel TMT bars ,10mm dia and over, cut to length bent to shape required including cranking bending spirally for hoping for coloumns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed.

M&L for 100 mm thick cement concrete type D-2 1:4:8 (using 40 mm graded stone aggregate), as in sub base for floor, finished even and rough complete all as specified and directed.

M&L for rubber moulded chequered cement concrete tiles 250mm x 250mmx 25mm thick, set jointed and pointed in cement slurry in floors with grey cement and pigments complete all as directed including 15mm thick screed bed in CM 1:6 complete all as specifed and directed

M&L for preparation of new wood or wood based surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparing old painted wood and wood based surfaces exceeding 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new steel surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for for applying one coat of synthetic enamel paint on old steel & iron surfaces (previously decorated) for grills, guard bars of any description not otherwise described over 10cm in width or girth including preparation of old surfaces complete all as specified and as directed.

M&L for preparation of new plaster surfaces of wall, applying wall putty on walls and applying two coat of oil emulsion over a coat of primer complete all as specified and directed.

M&L for preparation old surfaces of wall including, complete removal of existing treatment , and applying wall putty on walls and applying two coat oil emulsion over a coat of primer complete all as specified and directed.

S&F for 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed. Make:- Prayag/Pearl/Parryware/Hindware

M&L for prepration of new plastered surfaces of walls and applying two coats of weather proof water based emulsion paint ( Acrylic paint exterior grade) over a coat of Acrylic primer and including filling depression etc. complete all as specified and directed.

M&L for preparing of old surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efforecent salt and trading oil and greasy spots plastered or un plastered surfaces of wall including cornices, pilasters etc. and applying one coat of cement base paint white or tinted complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators,sockets,light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

Point wiring with PVC insulated 1.5 sqmm multi stranded FRLS copper conductor cable 1100 volts grade drawn into and including concealed rigid nonmetallic PVC conduit medium grade not less than 20 mm (ISI marked) with all conduit fitting and fixing accessories including sunk in cast iron/pressed steel terminal boxes (duly painted with two coats of anti corrosive paint out side and two coats of aluminium paint inside) with 2.8 mm thick HYLAM brand laminated white bakelite sheet cover for mounting switches, sockets, fan regulators, etc and 1.5 sqmm multi strand copper conductor cable as continuous earthwire complete for the following :- One light point controlled by one switch. Make For Conduit : - AKG/ Atul/ Kalinga/Precision/Modi Make For Wire : Havells/ Polycab/ Finolex /RPG / V-GUARD /KEI

One light point controlled by one switch complete all as specified and directed. .

One fan point controlled by one switch complete all as specified and directed. .

One 5 pin socket outlet 5 Amps controlled with one switch on the same board complete all as specified and directed. .

One 5 pin socket outlet 5 Amp controlled by one switch on independent board complete all as specified and directed.

All as per item 76 but with 2.5 sqmm multistrand copper conductor cable for one 15 Amp socket outlet controlled by one switch on independent board and 1.5 sqmm PVC insulated multi strand copper conductor cable as continous earth wire complete all as specified and directed. . Make For Conduit : - AKG/ Atul/ Kalinga/Precision/Modi Make For Wire : Havells/ Polycab/ Finolex /RPG / V-GUARD /KEI

Supply and fixing ceiling rose surface bakelite 3 terminals 65x50mm complete all as specified and directed. Make : Havells/Cona/Legrand.

S&F Switch piano flush button single pole one way 5 Amp complete all as specified and directed. .Make : Havells/Cona/Legrand.

S&F Switch socket combination , 6 Pin, 5/ 16 Amp 5 in 1, flush type, universal complete all as specified and directed. . Make : Havells/Cona/Legrand.

S&F Socket outlet, 5 Pin, 6 Amp 2 in 1, flush type, universal complete all as specified and directed. . . Make : Havells/Cona /Legrand.

S&F electronic step rotary type fan regulator of 240 volts, AC 50Hz complete all as specified and directed. Make:-Havells/Crompton/Legrand.

S&F Lamp holder including LED Bulb 9W/12W PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed. . Make for lamp holder : Cona,Leader,Anchor. Make for LED Bulb :- Crompton, Wipro, Osram.

S&F of Wall or recess Mounted Box type Batten with suitable LED tube rod of 1200 MM 18 W / 20 W LED. The LED Tube of design ensures uniform lighting complete all as specified and directed. Make :- Havells, Philips or Wipro.

S&F of 20W of LED security Light fixture with IP66 protected Die-Cast Aluminum housing and Heat resistive Toughened Glass. Driver shall be 3 stage Constant Current Constant Voltage with voltage range of 150-270V AC. Output voltage of driver should be complied to Safety Extra Low Voltage norms not exceeding 60V DC complete all as specified and directed. Make :- Havells, Philips or Wipro.

Supply & fix ceiling fans 1400 mm sweep. with electronic regulator and down rod all accessories required for proper hanging of fan complete all as specified and directed. Make:- Khaitan/Usha/Orient

Supply & fix Heavy duty Exhaust fans AC single phase 230/ 240 V, 900RPM, of size 300 mm sweep with louver complete, grouted in wall complete including reqd length of 1.5 Sqmm PVC multistranded copper conductor for connection from ceiling rose to exhaust fan incl testing on completion all as specified and directed. Make :- Havells, Bajaj C&G,

M & L for Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store including painting with two coat of synthetic enamel paint over one caot of primr and refixing the same complete all as specified and directed.

Taking down submain wiring of any size any type and in any position metalic/non metallic PVC conduit of wooden batten complete all as specified and directed.

M&L for sub main wiring with 2 runx 6 Sqmm + 1 run x 4 sqmm earth wire single core PVC insulated cable unseathed multistranded FRLS copper conductor LT 1100 volts grade FRLS cable IS-694 (ISI marked with valid CML No ) drawn in & icluding PVC conduit of dia not less than 25mm (ISI marked with valide CML No ) ncluding its all fittings/accessoreis with one run single core copper cable 4 sqmm multistranded conductor ( ISI marked with valide CML No) colour code as a earth continuity and connecting upto DB complete all as specified and directed.

S & F Sheet metal enclosure MCB DB, double door , 4 way TPN, 415 volts with 200 Amps rated bus bar with blanking plates wherever required and I.P. 20 degree protection complete all as specified and directed. Make:- Schneider/Havells/Legrand

S&F, in repair, MCB DB, sheet metal enclosures double door SPN 8 way with 200 Amps rated bus bar 240 volts 2 in 1 shutter (METAL DOOR) type with blanking plates where required and IP 43 degree protection c complete all as specified and directed. Make:- Schneider/Havells/Legrand .

S&F, MCB TPN 63 Amps, 240 volts 'C' series 25 KA ,including connection with suitable size copper lugs complete all as specified and directed. Make:- Schneider/Havells/Legrand

S&F, MCB SPN 40 Amps, 240 volts 'C' series 16 KA ,including connection with suitable size copper lugs complete all as specified and directed. . Make:- Schneider/Havells/Legrand

S&F, MCB SP 240 volts, 6 to 32 Amps, 'C' series 10 KA including connection with suitable size copper lugs. complete all as specified and directed. Make:- Schneider/Havells/Legrand

M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test point & to main switch board and testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded BT stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4) type B-1 (using 20mm graded BT stone aggregate) 40mm thick cover, reinforced with 8mm dia deformed or TMT bars 3 Nos both way with 12mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI medium grade earth lead protection pipe etc complete all as specified and directed.

Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armured electric power cable (Heavy duty ) with aluminium conductor 1100 volts grade, cross sectional area size 25 Sqmm 4 Core complete all as specified and directed. ..

Excavation in trenches n exc. 1.5 m wide and n' exc. 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning, filling of excavated soil, including spreading leveling, watering and well ramming in layers, not exceeding 25cm complete all as specified and directed.

Removing of surplus soil to a distance n exc 50 m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed. .

Sand filling in trenches with clean dry unwashed sand free from sharp particles, gently punning around the cables complete all as specified and directed. .

Bricks, old size sub class `B' laid in trenches with width wise along the alignment of the cable as protection complete all as specified and directed. .

S&F tube 'Light' grade galvanised with all fitting laid in trenches, fixed to wall and floor of 50 mm dia for cable protection complete all as specified and directed.

BHAGIRATH CONSTRUCTION COMPANY

M.S. ENGINEERS

M/s Shri Diwakar Singh

M/s Ratan Lal Jain and Co.

M/S YOGANSH CONSTRUCTION CO.

M/S Rajeev Construction

Babatia super works

MM CONSTRUCTION

M/s. Varinder Kumar Sharma

M/s J.B. Construction