REWIRING OF CERTAIN BLDG AND MAINT OF FIRE ALARM AND OVER HEAD CRANE SYSTEM IN SECT B UNDER GE (W) MATHURA

Amount

Taking down surface / concealed copper / aluminium point wiring (light,bell,fan,socket or power) complete, including fixtures and fittings such as switches,ceiling roses,lamp holders,pendants,sockets, regulators,tubelight fittings etc and making good disturbed surfaces with plaster on walls, floors etc complete all as specified and as directed.

M&L for point wiring complete with 1.5sqmm single core FRLSH ISI marked PVC insulated cable with multi stranded copper conductor in and including PVC conduit 20mm dia and thickness not less than 1.5mm, ISI marked with all accessories for concealed conduit as directed at site including chase cutting for one light/fan point controlled by one switch including MS sheet sunken box concealed in wall duly painted inside with one coat of red oxide primer and two coats of black bituminous paint in out side with 3mm thick hylum brand bakelite sheet cover for fixing switches, sockets, regulators etc. alongwith 1.5 sqmm multi stranded FRLSH, PVC insulated copper cable as continuous earth connected to comman earth and earth dolly including making good the disturbed surfaces complete all as specified and directed.

All as per item No 2.00 (here-in-before) but for one light point controlled by two way switches.

All as per item No 2.00 (here-in-before) but for one 3 pin socket outlet 5amps point controlled by one push button on independent board.

All as per item No 2.00 (here-in-before) but for one 3 pin socket outlet 5amps point controlled by one switch on the same board with other switches.

M&L for point wiring with 2.5 sqmm PVC insulated, unsheathed FRLSH multistrand copper conductor cable 1100 volts grade drawn into and including rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all and including conduit fittings and fixing accessories 1.60mm thick sunken anodised pressed steel terminal boxes with 3.0 mm thick hylam sheet cover for mounting switches, socket etc including 2.5 Sqmm FRLSH multistrand copper conductor cable as continuous earth wire connected to comen earth and earth dolly including making good the disturbed surfaces complete for one socket 16 Amp socket outlet controlled by one switch on independent board.complete all as specified and directed.

M&L for point wiring with 4.0 sqmm PVC insulated, unsheathed FRLSH multistrand copper conductor cable 1100 volts grade drawn into and including rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all and including conduit fittings and fixing accessories 1.60mm thick sunken anodised pressed steel terminal boxes with 3.0 mm thick hylam sheet cover for mounting switches, socket etc including 4.0 Sqmm FRLSH multistrand copper conductor cable as continuous earth wire connected to comen earth and earth dolly including making good the disturbed surfacescomplete for one socket 20 Amp socket outlet controlled by one switch on independent board.

M&L for Sub main wiring with 2 runs of 4 sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLSH 1100 volts grade cable drawn through and including PVC conduit ISI marked 25mm dia(external) with wall thickness not less than 1.8mm with conduit accessories fixed on wall/roof and one run of 4 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLSH 1100 volts grade cable as earth conductor including taking down old unserviceable submain wiring and making good disturbed surfaces complete all as specified and directed. Note : Two runs of 4 Sqmm cable, one run of 4 Sqmm earth conductor and one run of PVC conduit of 25mm dia shall be measured and paid as one unit length.

M&L for Sub main wiring with 2 runs of 6 sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS 1100 volts grade cable drawn through and including PVC conduit ISI marked 32mm dia(external) with wall thickness not less than 1.8mm with conduit accessories fixed on wall/roof and one run of 6 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS 1100 volts grade cable as earth conductor including taking down old unsv submain wiring and making good the disturbed surfaces complete all as specified and directed. Note : Two runs of 6 Sqmm cable, one run of 6 Sqmm earth conductor and one run of PVC conduit of 32mm dia shall be measured and paid as one unit length.

S&F switch piano flush button single pole, one way 5 Amp 240 Volt complete all as specified and directed.

S&F switch piano flush button single pole, one way 16 Amp 240 Volt complete all as specified and directed.

S&F switch piano flush button single pole, two way 5 Amp 240 Volt complete all as specified and directed.

S&F socket 5 amps 5 pin flush type , 230 volts complete all as specified and directed.

S&F socket out let ,6 pin 5 and 15 amps multi purpose 2 in 01 flush type 230 volt complete all as specified and directed.

S&F in repair sheet metal enclosure Single pole & neutral with 2 pin and earth plug and socket 20A 240 Volt complete with one single pole MCB of any cap from 10 to 20 A all as required at site or directed complete all as specified and directed.

S&F ceiling rose 63 x 30 mm three terminal, polycorbonate body complete all as specified and directed.

SS&F fan regulator electronic, stepped type hum free suitable control speed of fan from 0 to 100 % and connecting electrically all as required complete all as specified and directed.

S&F Angle/ battan holder polycorbonate type body suitable for batten fitting complete all as specified and directed.

S&F in repair LED bulb base B22 of capacity 10 watts not less than 700 lumens output at 6500K colour temp, complete all as specified and directed.

S&F surface and wall mounted 20 watt LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete all as specified and directed.

S&F 10W integrated LED bulk head luminaire environment friendly, ultra modern, energy saving, surface mounted decorative oval bulk head with LED light, complete all as specified and directed.

S&F surface and wall mounted 10 watt LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete all as specified and directed.

S&F in repair building security light of 30Watt energy saving & environmental friendly long life LED steet light made up of pressure die cast aluminium housing with high power LED as lighting source and lens empedded PC cover having IP65 protection and impact resistance of IK07 and electronic driver and all other fixing accessories complete all as specified and directed.

S&F in repair LED of 36W Watt 6000K slim panel IP40 2' x 2' LED panel for recessed (armstrong/grid ceiling) dust-free installation with high brightness LEDs for glare-free homogenous illumination with driver and all other connected accessories complete all as specified and directed.

S&F in repair sheet metal enclosure MCB distribution board triple pole & neutral 415 volts 4 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.

S&F in repair sheet metal enclosure MCB distribution board single pole & neutral 240 volts 12 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.

S&F sheet metal enclosure MCB distribution board single pole & neutral 240 volts 8 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.

S&F MCB Triple pole & neutral, 240 Volts, 63 amps breaking capacity 10KA (type 'B') complete all as specified and directed.

S&F MCB SPN 240 volts, 32 Amps 10KA, 'B' Curve complete all as specified and directed.

S&F MCB SPN 240 volts,40- 63 Amps, 10KA, 'B' Curve complete all as specified and directed.

S&F in replacement MCB single pole 240 volt any rating from 6 to 32 amps , B series with rupturing capacity 10 KA ,inculding providing thimble for out going cable complete all as specified and directed.

M&L for Earthing complete with galvanized steel earth plate electrodes 600 mmx600 mm x6 mm thick buried directly in ground earth plate not less than 2.25 m deep below normal ground level with top edge of the plate not less than 1.5 m below normal ground level connected to and including galvanized steel earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and steel including PCC pit in PCC 1:2:4 type B-1using 20 mm graded crushed stone aggregate, RCC frame with 40mm thick RCC cover reinforced with 8mm dia deformed bars handle. including excavation and earth work in any type of soil medium grade GI watering pipe 20mm bore with funnel and wire mesh and light grade GI protection pipe 15mm bore main board complete all as shown in electrical plate No 3 connected to main control board all as specified and testing on completion. Note: (i) Excavation earthwork charcoal PCC pit is covered under this item including taking out existing earth plate etc. complete all as specified and directed. (ii) The unit rate includes for protection pipe and GI wire 4mm dia from top of earth plate up to 7.5 meter above ground level.

M&L for Earthing complete with galvanized steel earth plate electrodes 600 mmx600 mm x6 mm thick buried directly in ground earth plate not less than 2.25 m deep below normal ground level with top edge of the plate not less than 1.5 m below normal ground level connected to and including galvanized GI strip 32X6mm by means of bolts, nuts, check nuts and washers of galvanized iron and steel including PCC pit in PCC (1:2:4) type B-1 using 20 mm graded crushed stone aggregate, RCC frame with 40mm thick RCC cover reinforced with 8mm dia deformed bars handle. including excavation and earth work in any type of soil medium grade GI watering pipe 20mm bore with funnel and wire mesh and light grade GI protection pipe 15mm bore main board complete all as shown in electrical plate No 3 connected to main control board all as specified and testing on completion. Note: (i) Excavation earthwork charcoal PCC pit is covered under this item including taking out existing earth plate etc. complete all as specified and directed. (ii) The unit rate includes for protection pipe and GI strip 32 x 6mm from top of earth plate up to 7.5 meter above ground level.

Taking down carefully existing ceilling/exaust fan any type, sweep and removing fan blade including cleaning all dust particle and filling cavities with filler material, oiling ,greasing including painting fan with blade complete one coat of synthetic enamel white paint by spraying and assemble the same along with all fixing connecting accessories and fixing the same position along with all new electrical wire connection complete all as specified and directed.

Supply, installation and commissioning in repair of addressable multi detector with base with binary coded address setting. Dual LEDs for 360 visibility. Polarity free, sleek low profile housing design. Regular 100mm base, IP rating: IP-42, approval: UL/EN listed. complete all as specified and directed.

Supply, installation and commissioning in repair of addressable Heat detector with fixed temperature of 59 degree celciaus and ROR feature to raise and alarm when the temperatures raises 11.1 per minute, shall have binary coded address setting. Dual LED's for 360 visibility. Non polarised, sleek low - profile housing design. Regular 100mm base, IP rating: IP-42, Approval : UL/EN listed. complete all as specified and directed.

Supply, installation and commissioning in repair of manual call point- single action/dual action- with back box and break glass rod shall be resttable by align key to avoid unauthentiated restorations- Approval : UL, listed Note:- Need to connect with monitor module (RE-717mm) complete all as specified and directed.

Supply and fixing in repair of addressable electronic sounder cum strobe with 24V DC, Audiable sound 85 db @ 1 mtr range. It is used for fire, Burglar and Emergency alarm system, low current consume @ 25 MA out put 2 different tone audiable sound. UL listed as per existing complete all as specified and directed.

Supply , installation and commissioning in repair of fault isolator Base/Module capable of mointoring shorted loop circuit and automatically restore communications when shorted condition are corrected complete all as specified and directed.

Repair and maintenance of main control panel by replacing defective control card and testing and reprogramming the locations as exist complete system as required complete all as specified and directed.

M&L for testing the complete fire alarm system after a regular interval of three months and to get the working certificate from user for the complete entire satisfaction of war Gaming centre complete all as specified and directed.

M&L for replacement of defective response indicator as per existing complete all as specified and directed. Note : Item No 35.00 to 42.00 will be carried out through authorised agency.

S&F in replacement the multi stand FRLSH 1.5 sqmm copper conductor cable 1100V grade complete in existing conduit as single core for defective portion complete all as specified and directed.

M&L in replacement 2x12 Volt dry battery with suitable terminal as per existing complete all as specified and directed.

M&L for check out the complete over head crane of 5 ton capacity and find out the defect and to change the defective parts as required at site as and when required and to do greasing al parts of the crane as applicable by good quality of grease/lubricant oil as required at site (The defective parts will be measured and paid seperately) complete all as specified and directed.

Supply only 25 Amp, 4 pole contactor 110 volt for 5 Ton capacity crane as per existing complete all as specified and directed.

Supply only MCB 3 pole, 63 Amp, 415 volt, rupturing capacity 10 KA complete all as specified and directed.

Supply only control relay (1.6-2.5 Amp) suitable for 220 volt 50 Hz as per existing complete all as specified and directed.

Supply only main Host Drive 7.5 KW Part No SX2000 as per existing complete all as specified and directed.

Supply only cross travel Drive 3.0 KW part No C X2000 as per existing complete all as specified and directed.

S&F in repair multi core 7x2.5 sqmm copper conductor cable circular in shape PVC insulated suitable for 1100 volt, 50 Hz complete all as specified and directed.

S&F in repair push button with base existing size and shape complete all as specified and directed.

S&F in repair for RCBO 240 volts, 40 Amps, 30mA, 6KA, 'B' Curve complete all as specified and directed.

Ms Kamal Kant Agarwal