Maintenance Work at VirattipathuManthai Stage in Theni Main Road in Ward No 67 Zone 3.

Amount

Removal of cut stone slabs / RCC Cover slabs (PWD 24-25 Pg No-28)

Supplying, erecting with necessary supports for plain surface such as RCC Boxing side slab and silmilar RCC slab with all cross bracing etc., complete in all floors of any height ( the retrived materials ) should be taken back by the contractor the payment for cenetering shall be given after the concrete is laid ( vertical portion ) 10m2 (Centering Square column 00.00m to 03.30m)

Reinforced Cement concrete 1:1.5 :3 (one cement, one and half sand & three course aggregate) using 20mm gauge hand broken/ and broken granite stone for all RCC items of works excluding centering shuttering and cost of reinforcement but including curing etc.,complete and also including fixing fan clamps and fixtures in rcc works wherever necessary as directed by departmental officer etc., complete. (RCC 1:1.5:3 0m to 4.5m above GL - SRC)

Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors. (Supply, Fabrication & placing of upto 16mm -Qtl) (9387/100 =93.87)

Plastering with cement mortar 1:3,10 mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306) Plastering in CM 1:3 10mm for Ceiling. - SRC

White washing two coats with freshly burnt shell lime white in colour in all floors including cost of lime and other materials brushes scaffolding charges etc.complete complying with standard specification and as directed. -100sq.m S.I.333 (Whitewashing with shell lime-100 sqm)

Painting two coats with approved cement paint

Painting two coats with Ready Mixed Enamel Paint over the Old iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.(Painting with ready mixed paint two coat )

Supply and Delivery Fabrication of MS doors and windows with outer frame and shutter frame in MS angle of size 40mm x 40mm x 6 mm with MS flat 25mm x 25mm x 6mm and MS sheet of 18 gauge including ventilating arrangements using 20mm square MS rods with locking arrangements including two coats of approved enamel paint over coat of red oxide including cost of angles, plates, sheets, fabrication charges, cost of hold fast and transportation charges etc., complete (WD-M1481 Fully panelled Double leaf - Door 1.00 m x 2.10 m )

AC Ceiling Fan complete 1400mm (56”) Sweep with 300mm Down Rod (without Regulator) (Higher End)

Supply of ( 18W LED Tube Light for T8 Fitting (Single Side) )

Supplying Mild Steel Grills for windows, ventilators, etc., including priming coat

Add GST 18%

SHRIDURGA CONTRACTORS (BID ID -1241991)