PROVN OF SENTRY POST IN SECT A-ACP1,2,4,7 AND17, TABLE TENNIS ROOM BY 3D TECHNOLOGY,1GUARD POST BY3D TECHNOLOGY, PROVN OF RAIN WATER HARVESTING IN RWA TAGORE LINE AND SPL REPAIR TO4 BATHROOM OF BLDG NO20,21 AND RA NORTH OFFICE COMPLEX UNDER GE JHANSI

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in any type of Hard/dense soil complete all as specified and directed.

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation ,shafts wells etc n exc 10 sqm on plan and getting out in hard/ dense Soil complete all as specified and directed.

Excavating in trenches not exc 1.5m wide & exc 1.5m but not exc 3.0m depth for foundation etc or for shafts, wells, cesspits, manholes etc and getting out in Hard/dense soil complete all as specified and directed.

Excavating over areas, not exc 1.5 m deep and getting out in hard dense soil complete all as specified and directed.

Excavating over areas, exc 1.5m and not exc 3.0m deep and getting out in hard dense soil complete all as specified and directed.

M&L Type D-2 1:4:8 ( using 40 mm stone aggregate) cement concrete in foundations, filling and mass concrete complete all as specified and directed.

M&L for High Strength deformed TMT bars 10 mm dia and over, cut to length, bent to shape reqiured including carncking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.90 mm dia complete all as specified and directed.

M&L for High Strength deformed TMT bars 5 mm dia and over upto and including 10 mm dia stirrups, spacers and binders, cut to length, bent to shape reqiured including carncking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.90 mm dia complete all as specified and directed.

Use and waste of Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; n exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in Roof Slab supported on walls complete all as specified and directed.

M&L rendering 15mm thick in cement mortar 1:6 on internal fair faces of brick walls or on concrete surfaces plastered surfaces finished even and smooth without using extra cement complete all as specified and directed

M&L for rendering 15mm thick in two coats (1st coat 10 mm thick in CM 1:4 & 2nd coat 5 mm thick in CM 1:4 with WPC) on fair faces of brick work/concrete surfaces, finished even & smooth (without using extra cement) complete all as specified and directed. Note: WPC in 5 mm thick 2nd layer plaster measured and paid separately.

M&L for brick work with sub class B brick (old size) straight or curved on plan exc. 6 M mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for design and sectioning of wall façade with Robotic 3D printing considering 3D printble concrete mix, 3D concrete printed Tiger façade in Ex-situ manner (of approx length 4.0 m, height 3.50 m and width 2.0m), including installation over suitable support and finishing & painting of 3D conrete printed Tiger Facade in approved pattern, complete all as specified and directed.

Supply only liquid Integral water proofing compound complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil complete all as specified and as directed by the Engineer-in-Charge

Removing excavated soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed by the Engineer-in-Charge

M&L for 75mm thick cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate), complete all as specified and directed.

M&L for 25 mm thick cement concrete 1:2:4 Type B0 using 12.5 mm graded stone aggreagate as in flooring complete all as specified and directed.

M&L for Hardcore(broken stone) of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for moorum/red bajri in floors or paving laid in layers n exc 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in plinth protection and path laid in alternate panels not more than 3 mtr in length, laid to slope 1:30 including forming joints 10 mm wide and upto full depth of PCC and filled with bitumen mastic (1:3) 1 part bitumen 85/25 and 3 parts of sand complete all as specified and directed. {Note:-Rate is deemed to be inclusive of materials against forming & filling of joints }

M&L for applying two coats of acrylic interior emulsion on wall surface over a coat of chalk whiting primer complete all as specified and directed.

M&L for applying wall care putty @ 1 Kg(undiluted) per sq mtr. of average thickness 1 mm over the plastered/old painted wall complete all as specified and directed.

M&L for prepration of surfaces of wall / ceiling and applying Two coats of weather proof exterior acrylic emulsion over a coat of exterior primer complete all as specified and directed.

M&L for box type steel window with 80x40x1.25 m MS tubular frame with side hung shutters ( double shutter for glass and gauze) without sash bars jointed together with and incl grill using 12 mm square bar @ 10 cm C/C incl box type hinges with steel handle and steel pag stay complete glazing bars doweled and welded complete all as specified as directed. Note:- (a) The Glass / gauze shell be measured and paid separately. (b) Side hung Z-Section shutter shall be of size 20mm x 20mm x 25mm and 0.3mm thick.

S&F 5.5 mm thick sheet tinted glass and glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and directed including hacking out old glass complete all as specified and as directed by the Engineer-in-Charge

S&F mortice lock of size 100mm, 4 lever type, duly fixed in aluminium door, complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (square / rectangular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in flooring etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed/ bedding layer in CM (1:6) complete all as specified and as directed.

M&L for glazed ceramic colour tiles in vertical surface of size 450 X 300 x 7 mm thick, jointless type, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with and including 10 mm thick rendering in CM (1:4) for receiving the tiles, complete all as directed.

S&F 15mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed by the Engineer-in-Charge

S&F 20mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed by the Engineer-in-Charge

S&F 15mm bore concealed stop cock CP type with long shank and cup screwed down high pressure with crutch or butterfly handle screwed for iron pipe or union complete all as specifed and directed

S&F in replacement of angular stop cock 15 mm dia with wall flange made of cast copper alloy, chromium plated type, complete all as specified and as directed by the Engineer-in-Charge

S&F 15mm bore bib tap long body fancy cast copper alloy with crutch of butterfly handle, screwed down, high pressure for iron pipe or for brass ferrule complete all as specified and as directed by the Engineer-in-Charge

S & f for 15mm dia pillar taps fancy cast copper alloy with crutch of butterfly handle, screwed down, high pressure for iron pipe or for brass ferrule cast copper alloy type complete all as specified and as directed by the Engineer-in-Charge

S&F for Vitreous China wash basin, white flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and as directed by the Engineer-in-Charge

S&F for of 1st quality vitreous china squatting pan Orissa pattern of size 580x440 mm, white colour with integral foot rests water closet including flush pipe but exluding flushing cistern, duly fixed in lime concrete bedding and making good of floor surface, complete all as specified and as directed by the Engineer-in-Charge

S&F for PVC waste pipe 32 mm dia 750 mm long with for wash hand basin or for kitchen sink, complete all as specified and directed.

S&F for 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

S&F for 10 ltr capacity PVC valve less syphonic action type flushing cistern, white, with inlet ball valve, float and handle with and including wall bracket, 32 mm dia PVC flush pipe and connected to squat pattern / pedestal pattern water closet, including all joints and making good to the wall & floor,complete all specified and directed.

M&L stainless steel grating of square 150mmx150mm with hinge type openable jali including fixing with white cement complete all as specified and as directed by the Engineer-in-Charge

S&F in replacement of overhead shower of dia 125 mm round shape single flow, ABS body chrome plated fancy type, with and incl swirl type shower arm of 20mm dia with wall flange made of cast copper alloy, chromium plated fancy type, complete all as specified and as directed by the Engineer-in-Charge

S&F in replacement of towel rail 600 mm long and wall bracket made of cast copper alloy, chromium plated, complete all as specified and as directed by the Engineer-in-Charge

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing. The door frame shall be tied to the wall using 75/100mm long MS screw as directed .

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. M S tube for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stile and rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and as directed by the Engineer-in-Charge

M&L for 100 mm butt hinges stainless steel medium weight of approved make ISI marked complete all as specified and as directed by the Engineer-in-Charge

S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed

S&F 150mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 100mm long aluminium anodized, barrel tower bolts of extruded section complete all as specified and directed

S&F of rotational moulded polyethylene cylindrical vertical with closed top water storage tank double layered ISI Marked 1000 Ltr capacity with connecting nipple, hoisted and fixed in position on new or existing foundation and making GI tubing inlet or outlet connection, complete all as specified and directed.

S&F in replacement of 20 mm dia of Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iorn pipe and fixed. (minium weight 20 mm-210 gms) etc, complete all as specified and as directed

S&F of Ringfit PVC (SWR) pipe of 110 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type , having one end of the pipe as plain and other end as self socketed with an integral groove to hold the rubber gasket, with and incl rubber tighten gaskets, ringfit sockets etc, complete pipe duly fixed to wall, complete all as specified and directed.

S&F of PVC (SWR) pipe of 110 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type having one end of the pipe as plain and other end socketed, duly fixed with cement solvent etc, complete pipe duly laid in trenches or in floors, complete all as specified and as directed

S&F of Ringfit PVC (SWR) pipe of 75 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end as self socketed with an integral groove to hold the rubber gasket, with and incl rubber tighten gaskets, ringfit sockets etc, complete pipe duly fixed to wall, complete all as specified and directed.

S&F of PVC (SWR) pipe of 75 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end socketed, duly fixed with cement solvent etc, complete pipe duly laid in trenches or in floors, complete all as directed.

S&F 110 mm bore PVC (SWR) bends of any radius, complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends of any radius, complete all as specified and directed.

S&F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal, complete all as specified and directed.

S&F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal, complete all as specified and directed.

S&F PVC (SWR) vent cowl 75mm bore, jointing to waste pipe, complete all as specified and directed.

M&L for factory made PU coated, machine pressed precast concrete interlocking paver or cobel block of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with no pigment made of PVC moulded (or rubber mould) with vibrating system, with and including 50mm thick sand cushioning complete all as specified and directed. Note : The cost of sand cushion is included in quoted rate.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed

M&L PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in surface channels and drains etc. complete all as specified and as directed

M & L PCC 1:2:4, type B1, using 20mm graded stone aggregate as in coping, kneelers, apex stones, bed plates, kerbs etc complete all as specified and as directed

M&L for 10 mm thick rendering in CM (1:4) on fair/other than fair faces of brick work finished even and fair complete all as specified and directed.

Dismantling Asbestos Cement Corrugated or Semi corrugated in Roof covering, complete all as specified and directed.

S&F of pre-painted 0.50mm thick Gavalume Aluminium Zinc coating GI based corrugated / semi corrugated / trapezoidal steel sheet of any colour having tensile strength 550 MPa and AZ 150 grade as in roof covering/cladding to walls, fixed with self tapping screws, complete all as specified and directed.

S&F pre-painted Galvalume Aluminium Zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength 550 MPa and AZ 150 grade as in ridge of roof covering, fixed with self tapping screws, complete all as specified and directed.

Dismantling timber scantling 40.0 sqcm and over in section in any position as in framed / unframed works such as roof purlins, rafters, fillets, ridges etc as in roof/ ceiling, complete all as specified and directed.

M&L for structural steel Fe-410-W(Gde-E-250) quality A for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, complete all as specified and directed.

S&F of exposed frame false ceiling system with GI powder coated grid consisting of interlocking arrangement of main T runner of 15mm size, suspended at 1200mm C/C and cross T runner of 15mm size suspended at 600mm C/C supported by 1.5 mm dia GI wire from roof/Slab/truss including wall/perimeter runner/channel of 15 mm size with and including 4mm thick pre-painted non asbestos fiber reinforced cement board (E-board), designer type of size 595x595mm duly fixed in ceiling frame work complete all as specified and directed.

Demolition of brick work built in cement or lime mortar, complete all as directed.

Taking down cement plaster on brick or stone wall,dado and skirting etc including racking out joints hacking for key scrubbing down with water etc, complete all as specified and directed.

Demolition of cement concrete (un-reinforced ) as in flooring or paving above or below ground level complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and directed.

Taking down wooden chowkhat or frame area exc 1.5 sqm and not exc 4 Sqm each with shutter (without taking off shutter from frame) complete all as specified and directed.

All as per item No 78 above but area not exc 1.5 Sqm each

S&F Factory made single 30 mm thick extruded WPC (Wood Polymer Composite) solid moulded flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws incl in this item)

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm (± 5 mm tolerence in dimension) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.

S&F Window ECO 4000, of double rebate openable/fixed window or Ventilator made of galvanised steel colour coated/ powder coated (base steel as per IS 513 Of 'D' quality, galvanised as per IS 277 with zinc of 120 gms/sqm) with total thickness of coating 0.58 microns thick and back coated with alkyd backer 5-7 micron thick or powder coated with pure polyster powder up to 50-60 micron thick. Outer frame section 72 x 55 mm , center mullion section 72 x 50 mm, shutter section 47 x 20 mm, fly mesh section 40 x 20 mm and the fixed glass beading section 12 x 12 mm, outer frame and mullions shall consist rebate for glazed shutter, fly mesh and 20 mm provision for guard bars/grills, the section cut to length mitre joined with corner bracket, center millions fixed with mullions cap, stay, handle, latch, 2 nos of heavy duty stainless steel pivot hinges per shutter and paneled with 5 mm thick plain float glass and S. S. mesh for fly mesh shutter (304 grade), fitted using EPDM (Ethyl Propyelene Diamine Monomer) gaskets including fixing windows in the Concrete /Masonry wall by means of self expanding screw, including 10 mm square bars welded to 6 x 12 mm flat at a distance 150mm C/C (Pitch) , 4 mm Glass , Stainless Steel wiremess etc complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections including fittings complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections, including fittings complete all as specified and directed.

S&F of rotational moulded polyethylene cylindrical vertical with closed top water storage tank double layered ISI marked 500 Ltr capacity with connecting nipple, hoisted and fixed in position on new or existing foundation and making GI tubing inlet or outlet connection, with and incl disconnecting and dismantling the existing un-serviceable PVC/RCC water tank on top of roof/slab of bldgs, complete all as specified and directed.

S&F for 15mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

M&L for precast RCC (1:2:4) type B1 using 20mm graded stone agg for manhole cover (Note:- Reinforcement shall be measured and paid separetly) complete all as specified and directed.

Taking down of eaves gutter and rain / waste water pipes including all fittings any size and pattern, complete all as specified and directed.

S&F PVC floor trap of 75 mm outlet, jointing to waste pipe, complete all as specified and directed.

Taking out broken sewage line at a depth n.exc 1.5m and replacing with new sewage pipe line with DWCPE pipe 150/175 mm (ID/OD) complete laid in trenches including earthwork, removal and return filling and jointed including testing alongwith necessary jointing material tees/ union / socket etc complete laid on PCC beed 150 mm thick PCC in 1:2:4 type B0 of avg depth 2.0 m including packing under and haunching against the side of pipes after they are laid and tested all as specified in IS 16098:2013 and as directed

Excavating in post holes (or similar holes) each n.exc 0.5cu m, getting out,returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding, 25cm watering and removing surplus soil to a distance n exc 50m and making good surface in hard/Dense complete all as specified and directed.

S&F mild steel joints angle channel or tee section and fix independently in concrete as fencing post and similar works conforming to Fe 290 Gde E- 165 including all necessary drilling, bolting or riveting etc complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

S & F mild steel screw bolts purpose made with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed to be fitted with washers and one hexagonal or square nut, exc. 5cm long dia of shank 11 to 15mm complete all as specified and directed.

S&F 4mm dia MS galvanised chain link fencing of size 75 x 75mm or less of any type of standard, rail straining bolts etc including provision of binding wire as directed by Engineer-in-charge. Note :- for ascertaining weight of Chain link fencing per Sqm board shall be ordered by GE

M&L for MS round bars 10mm dia & over cut to length bent to shape required incl cranking bending spirally for fencing and binding with & include MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M & L rendering 5 mm thick on fair faces of concrete surfaces on ceilings in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and as directed..

M & L preparing newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M & L preparing newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.

Providing and fixing white vitreous china large flat back/half stall Urinal basin of specified sizes with C.P brass Auto Closing Urinal Flush Valve and C.P. brass spreaders with brass unions, C.P brass bottle trap, extension pipes, wall flanges and concealed G.I clamps complete, cutting and making good the walls and floors wherever required complete all as specified and directed.

Complete removal of exisiting treatment, washing and rubbing of old surfaces of wall and applying two coats of white wash complete all as specified and directed.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete.all as specified and directed.

S&F PVC connection 15mm bore with PTMT nuts and 600 mm long complete all as specified and directed.

M&L for powder coated aluminium frame for doors, windows, ventilators with one or more rebates, fabricated out of powder coated aluminium hallow square or rectangular section of required size incl necessary joining cleats, fixing screws etc complete, having size of frame for doors 100mm x45mm x 3.18 mm thick; for window 104mm x 45mm x 3mm thick; for ventilators 59mm x 33mm x 2.5mm, complete all as specified and directed.

M&L for powder coated aluminium door shutters, aluminium section for top rail and styles 85mm x 45mm x 2.0mm thick; bottom rail 100mm x 45mm x 2mm thick and lock rail 100mm x 45mmx 2.0mm thick incl necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, powder coated aluminum hinges, powder coated aluminum snap beading, screws etc, complete all as specified and directed.

M&L for double action floor spring, hydraulically regulated, made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed.

M&L for aluminium (Extruded section) body door closer, hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 60 to 80 kg complete all as specified and as directed.

M&L for preparing newly plastered surfaces of ceiling and applying two coats of interior acrylic emulsion (OBD) over coat primer and a coat of putty to make the surface to be plain and smooth complete all as specified and directed

M&L for 3D printed concrete wall panel comprising of 3 layer of overall thickness wall 300mm complete all as specified and directed.

Providing and fixing in position for roof 185 mm thick factory made Expanded Polystyrene Core (EPS Core) roof/floor panels made of 2.5 mm dia G.I. wire mesh with 75 mm pitch in both the directions and on both faces of panel,. The EPS core shall consist of 100 mm thick EPS of density not less than 15kg/ per cum. The bottom side of the panel shall be finished by applying a layer of 35 mm thick cement mortar 1: 3 {1 cement: 3 coarse sand (not having more than 40% stone chips of size upto 6 mm)} À with the help of shotcreting equipment etc at a pressure of not less than 1 bar (100Kn/m2) and surface finished with trowel. The top face of the panel shall be provided and finished by applying 50 mm thick layer of cement concrete 1:1.5: 3 (1 cement :1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). including neassary support for EPS panel /concerete. Fixing operations of roof/floor panels shall be completed in all respect as per drawings and specifications and under the overall direction EPS panel manufactures, the manufactures shall give complete 2D plan design, structural design , 3D model design before commencement of work at no additional cost.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. and removing materials to store for taking credit and making good disturbed surfaces of walls, floors, etc.complete all as specified and directed.

M&L for Point wiring with 1.5 Sqmm FRLS insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core conforming to IS:694 along with one run of 1.5 Sqmm FRLS insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm concealed in wall/ floor etc including provision of electrogalvanised terminal box of thickness not less than 18 SWG, with earth dolly of suitable size concealed in wall and covered with 3 mm thick phenolic laminated sheet fixed with brass /GI screws for mounting switches, sockets, fan regulator, etc. complete all as specified and directed by Engineer-in-Charge for the following points:-

One light/ceiling fan/exhaust fan point controlled by one switch

One 6A socket point controlled by one switch on independent board

One 6A socket point controlled by one switch on same board

All as per srl item no. 112 here-in-before but with 2.5 sq mm FRLSH copper wire with 2.5 Sqmm FRLSH copper earth wire for one 16 Amp socket point controlled by one 16 Amp switch .

M&L for point wiring for modular fittings complete with 1.5 Sqmm FRLSH insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core conforming to IS:694 along with one run of 1.5 Sqmm FRLSH insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm(OD), concealed in wall/ floor etc including provision of electrogalvanised steel terminal boxe concealed in wall/floor etc and modular cover plates with frames and 1.50 sq mm PVC insulated unsheathed stranded copper conductor (FRLSH) cable for common earth and connecting to earth dolly all as specified and directed by Enrg-in-charge. (Note- rates of chasing/cutting before plastering of wall or inserting it in 3D printed walls and making good shall be included in the unit rate) :-

One light / ceiling fan / exhaust fan / call bell point controlled by one switch

One 6A socket point controlled by one switch on independent board

One 6A socket point controlled by one switch on same board

All as per srl item No. 114 here-in-before but with 2.5 sq mm FRLSH copper wire with 2.5 Sqmm FRLSH copper earth wire for one 16 Amp socket point controlled by one 16 Amp switch on independent board.

M&L for sub main wiring along with earth wire with FRLSH insulated copper conductor, single core cable drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 25mm concealed in wall/ floor etc complete all as specified and directed for the following sizes:- (Note: Three runs of copper cable and one run of PVC conduit shall be measured as one unit length)

2runs x 6 sqmm(Ph & N) + 1run x 6 sqmm(earth wire)

2runs x 4 sqmm(Ph & N) + 1run x 4 sqmm(earth wire)

S&F, Switch piano type, single pole, one way, 6 amps, 240 volts, complete all as specified and directed.

S&F, Switch piano type, single pole, one way, 16 amps, 240 volts, complete all as specified and directed.

S&F, Socket, 6 pin, 6/16 Amp, multipurpose 240 volts, complete all as specified and directed.

S&F, Socket, two-in-one, 5 pin, 6 Amp, universal type, 240 volts, complete all as specified and directed.

S&F, Ceiling rose, three terminals, bakelite body, 240 volts, complete all as specified and directed.

Supply and fix electronic fan regulator in 5 steps, 240V, 50Hz complete all as specified and directed.

S&F of Modular switch 1 way 6A, 1 module 240V, 50Hz complete all as specified and directed.

S&F of Modular switch 1 way 16A, 1 module 240V, 50Hz complete all as specified and directed.

S&F of Modular Socket, 6A - 2/3 pin combined 2 module 240V, 50Hz complete all as specified and directed.

S&F of Modular Socket 6A/16A - 2/3 pin combined 2 module 240V, 50Hz complete all as specified and directed.

S&F of Modular blank plate 1 module complete all as specified and directed.

Supply and fix LED batten box type with CRCA sheet steel body pre-wired suitable for and including provision of 1x20 watt (4 feet) retrofit LED tube with PC body and connecting up with twisted three core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting complete all as specified and directed by Engineer-in-Charge.

S & F in replacement of 7W White LED retrofit lamp suitable for B-22 holder base with polycarbonate diffuser and aluminium heat sink.

S&F, angle holder, metal cased, bakelite body, 240 volts, complete all as specified and directed.

S&F of Decorative wall light fixture made up of Polycarbonate with and including 7W retrofit LED lamp, full white/ Warm white of approved model complete all as specified and directed.

Supply and fixing of LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F of LED street/security light fitting 35 watts with high efficiency long life LEDs with In-built electronic driver and surge protection upto 10 Kv complete housed in pressure die-cast aluminium housing covered with polycarbonate cover with IP66 degree of protection including provision of GI pipe bracket made up of 25mm dia medium grade GI pipe of length 1.50m bent to required shape and fixing on walls with suitable MS clamps(02Nos) made up of 25mmx4mm MS flat, nuts, bolts and washers and provision of 3 core twisted flexible copper cable of size 0.5 sqmm from ceiling rose to connector of fitting complete all as specified and as directed.

S&F LED luminaire 600 mm x 600 mm, 36 watt, 220 V AC recessed type (Cool white & warm white) with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling/grid ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engineer-in-Charge.

Supply, installation, testing and commissioning of air cooled split type Air conditioner of 1.5 TR capacity, wall mounted type, comprise of copper pipe heat exchangers, having R-410A refrigerant, electric driven, 230 volts AC, single Phase, 50 Hz, having either Five Star rating or inverter technology, with and incl inlet/outlet copper pipe for refrigerant between indoor & outdoor unit and flexible copper wire of suitable size as recommended by manufacturer, complete all as specified and directed. Note : 1. The split type Air conditioner shall comprise of one indoor and one outdoor unit with connected piping duly insulated and connecting cable of required length 2. The cost of making opening for passing through inlet/outlet copper pipes and electrical cord and making good of surface as original by plastering / whitewash / colour / distemper etc is included in quoted rate and no extra payment will be made to contractor to this effect.

Supply and fix electric water heater, storage type ABS body with glass lined stainless steel inner tank and heating element upto 2 KW of capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed

S&F of modular MCB protected plug and socket board in sheet steel enclosure with 25A rated mini MCB and 20A rated 3 pin plug, 240 V, 50 Hz complete including cutting the wall surfaces for flush mounting of socket board and making good with cement plaster, putty and paint to match with the existing surface complete all as specified and directed.

Supply and fixing ceiling fans complete with aluminium blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply and fixing exhaust fan with plastic body with louvers, 250mm sweep, single phase, 230 volts, 50 Hz. complete all as specified and directed.

S&F of MCCB / MCB distribution board, Vertical TPN, 4 way, 415 V, 3 phase, AC with MCCB as incomer and MCBs as outgoing in sheet steel powder painted enclosure double door type with minimum IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface complete all as specified and directed. Note: MCCB / MCBs shall be measured and paid separately.

S&F of MCB distribution board, SPN, 8 way, 240 V, single phase, AC in sheet steel powder painted enclosure double door type with minimum IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface complete all as specified and directed. Note: MCBs shall be measured and paid separately.

Supply and fix MCB distribution board, SPN, 4 way 230 Volt in sheet steel powder painted enclosure double door type with IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface all as specified and directed by Engineer-in-Charge. Note: MCBs shall be measured and paid separetely.

S&F of MCCB 125A, 16 KA, 4 Pole, 415 V, 50 Hz with fixed thermal magnetic release complete all as specified and directed.

S&F of MCB 63A, 10 KA, TPN, 415 V, 50 Hz complete all as specified and directed.

S& F MCB SPN 40 Amp, 10 KA, 'C' curve, 230 V, 50 Hz complete all as specified and directed.

S& F MCB SP 6 to 32 Amp, 10 KA, 'C' curve, 230 V, 50 Hz complete all as specified and directed.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulated stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or strip and overall PVC sheathed, 25 sq mm 4 core in service connections as per IS 7098(Part 1) including connecting on LT OH line / LT panel /DB with suitable lugs, glands, binding wire etc complete all as specified and directed.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulated stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or strip and overall PVC sheathed, 10 sq mm 2 core in service connections as per IS 7098(Part 1) including connecting on LT OH line / LT panel /DB with suitable lugs, glands, binding wire etc complete all as specified and directed.

Material and labour for Double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, inner dia 38mm with smooth internal and profiled external surface, non-pressure type, laid in trenches/floors/duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends, etc for protection of LT cable XLPE grade 1100 volts complete all as specified and directed by Engineer-in-Charge.

M&L for Earthing complete with galvanised iron earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connecting to GI wire 4 dia mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel and earth wire protected by 15mm dia GI pipe medium grade and connected to distribution board/earthing test point all as shown in electircal plate No. 3 of SSR Part-I(2009) and testing on completion complete all as specified and directed. Note :- (a) The unit rate quoted shall also include for excavation, earth work in any type of soil, plain cement concrete 1:3:6 mix, Type C1 pit, 40mm thick RCC 1:2:4 mix type B1 cover reinforced with 8mm dia TMT bras @ 150mm C/C both ways, GI funnel with watering pipe, wire mesh,protection pipe, earth wire upto 7.50m long complete in addition to item No. 1(a) to (e) of preamble (Notes) under sub heading earthing, specified in SSR Part II. (b) Earthing result should be less than 5 Ohm required.

N K ENTERPRISES (BID ID -3130699)

M/S Ritu Tandon (BID ID -3130408)

M/S Nextage Construction (BID ID -3129502)