SPL REPAIR TO BLDG NOs P 763 A to F T 5 MT SHED AND T 761 OR MD ACCN AT FARIDKOT MIL STN

Amount

Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each as doors, windows & ventilators etc. and removal from site all as specified and directed.

Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters (without taking off shutters from the frames) all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer, calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed by Engineer-in-Charge.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer, calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed by Engineer-in-Charge.

M&L PCC, 1:3:6, type C-1, using 20 mm graded stone aggregate for filling in back of pressed steel door frame/chowkhat and fixing of bed block of hold fast etc complete all as specified and as directed.

M & L For 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engineer-in-Charge.

S&F 2nd class hardwood factory made glazed skeleton shutters 35 mm thick open rebated and prepared to receive guage etc but divided into squares, with plain chamfered or rounded, metered and riveted sash bars any numbers complete all as specified and directed by Engineer-in-Charge.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer, calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed by Engineer-in-Charge.

S&F Factory Made Solid PVC Moulded Door Shutter, with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm Plain colour PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed by Engineer-in-Charge.

S&F pressed steel rectangular frames for built in cupboard doors, made out of mild steel sheet 1.2 mm thick with girth of frame 185mm including MS rawls plugs and fixing 100mm long butt hinges medium weight cold rolled mild steel etc including two coats of synthetic enamel paint over a shop coat of zinc chromate primer complete all as specified and directed by Engineer-in-Charge.

S&F pressed steel door shutters including stiffeners made out of mild steel sheet 1.2 mm thick cut to size, holes punched and welded seams including bending or turning up all around, mitered angle, one No of locking arrangement two nos Handle etc and applying two coats of synthetic enamel paint over a shop coat of zinc chromate primer all as per Godrej pattern complete all as specified and directed by Engineer-in-Charge. Note : (i) Measurement of door shutter shall be taken as exact size of cupboard opening (excluding frame and folded/ turned up portion) (ii) Stiffeners of 150mm girth and height equal to height of shutter made to shape as directed by Engr-in-charge. cost of these stiffeners shall be deemed to be included in the unit rate quoted for door shutters and no extra measurement/payment shall be made for the same.

Dismentling of boarding any description fixed in any position with nails complete all as specified.

M&L for 25 mm thick both side prelaminated (One side decorative and one side plain) particle board exterior grade fixed with screws to timber frame work complete all as specified

M&L for Plain fillets or beading of sectional area exc 3 & n.exc 6 sqcm of 2nd class hard wood square, rectangular or triangular in section , clean sawn, secured with nails or brads for securing wiremesh or similar works put together with glue pinned at joints in complete all as specified and directed by Engineer - in - Charge.

M&L softwood Moulding as in cornices, picture rails and the like n.exc 6 sqcm complete all as specified and directed by Engineer-in-Charge.

S&F 100 mm long, Stainless Steel hinges with stainless steel steel screws complete all as specified and directed by Engineer-in-Charge.

Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 19-20 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk stainless steel screws, all as per direction of Engineer- In- Charge.

S &F 30mm width Continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and directed by Engineer-in-Charge.

S&F 150mm long cromium plated decorative handle including necessary screw and fittings complete all as specified and directed.

S&F Magnetic Catcher of size 50 mm fixed with screws complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts, 150 mm long of extruded section complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts, 200 mm long of extruded section complete all as specified and directed.

S&F Aluminium anodised handles, cast type anodised 150 mm long complete all as specified and directed.

S&F in repair 300 mm size mild steel ordinary rat rail rod pattern springs including roller and roller plate complete.

S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed fixed complete all as specified

S&F 140 mm length floor door stopper of aluminium alloy body and tongue, anodised with hard drawan steel spring fixed in floor complete all as specified and directed.

S&F 75 to 80 mm long door silencer suitable for Door size up to 4 Sqm, fixed with suitable screws complete all as specified and directed.

S&F Aluminium frame for doors, window/ ventilators with one or more rebates including joining cleat for fixing etc complete with powder coating on aluminium minimum thickness of powder coating 50 micron as per the specification the top and bottom horizontal members and vertical members adjacent walls shall be fixed with floor, ceiling walls and cills where required and fixing with the help of rawal plug and screw or with fixing clip or with expansion hold plate fasteners including making arrangements to fix guard bars and S&F of PVC sleeves for guard bars. Aluminium section shall be smooth, rust free, straight mitred and jointed mechanically where ever required all complete as per the direction of Engineer-in-charge. Note: Guard Bars shall be measured and paid for separetely.

M&L for providing and fixing stainless steel (Grade 304) in Window Grill made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the Grill with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size complete all as specified and directed.

S&F Aluminium window (glazed and gauzed both),side hung type without sash bars, aluminum section weighing 0.55 Kg/m including necessary joining cleats, glazing, clips, rubber packing, anodised aluminium snap beading screws, aluminium fitting such as peg stays 150mm long (01 No) for each shutter, hinges type B-21, 100mm long (02 Nos) suitable handle (01 No) with powder coating of any colour (thickness of powder coating not less than 50micron) etc complete all as specified and directed. Note: Glass and wiremesh will be measured and paid seperately.

S&F Eye door viewer (magic eye) of size 25mm dia fixed in position for door shutters complete all as specified and directed.

S&F of Door Seal (brush type) of length exc 800mm and n.exc 1000mm, width not less than 38mm Including Brush fixed with screws complete as directed.

S&F Stainless steel wire cloth 0.40 mm nominal dia of wire and avarage width of aparture 1.40mm and fixed etc., complete all as specified and directed.

M & L sheet glass ordinary quality 4 mm thick and glazing with oil putty in square n exc 0.50 Sqm in each panes fixed to steel, metal or wooden window frames complete all as specified.

All as per Ser item No 34.00 above but pin head type, figured glass

S&F Framed work such as grills, Ventilator frame, Steel Door Frame ,Steel Door Shutter,gratings coolar stand, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified.

M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying a coat of red oxide zinc chrome primer and two coats of synthetic enamel paint including preparation of surface complete all as specified.

S& F Mild steel 1.25 mm , plain, sheet in Mild steel sheet cut to size edges beaded if directed,holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required and directed by Engr -in-Charge

M&L for preparation os steel surface and applying two coats of synthetic enameled paint over a coat of red oxide primer n.exc 10cm in width or girth complete all as specified and directed.

M&L preparing wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and directed.

S&F Non skid ceramic tiles 7 to 8 mm thick (square/rectangular) (coloured tiles) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles15mm thick screed bed or bedding layer CM 1:4 for laying finishes,complete all as specified as directed by Engr-in- Charge

M&L Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but n.exc 0.38 Sqm, cut to required size and shape as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), terrazo dado/wall tiling and skirting. etc on brick or stone walls etc including racking out joints hacking for key and scrubbing and removing rubbish off the premises complete all as specified.

S&F Glazed ceramic coloured tiles with highlighter in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 15 mm thick rendering in CM 1:4 on other than fair face of brick work. Note : Highlighter shall be provided as directed by Engr-in-Charge.

M&L Cement concrete tiles 25cm x 25cm x 22mm thick, machine pressed; set jointed andpointed in neat cement slurry in floors, and cut and polished over and including 15mm thick screed bed or bedding layer CM 1:4 for laying finishes, complete all as specified as directed by Engr-in- Charge

Dismantling stone slabs of any description or thickness in floors, apron etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L Granite (of any type) work 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. all as specified

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

M&L, Machine cut kota stone slab flooring, cills 20-25mm thick over cement screed base laid and jointed With grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. Note : Single piece of Kota stone to be fixed in stair treads.

M&L, Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. Note : Single piece of Kota stone to be fixed in stair treads.

Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed..

M&L for water proofing treatment to sunken slab and adjoining vertical surfaces as specified under :- (a) Cleaning of sunen portion and roughining to receive treatment. (b) M&L rendering 10 mm thick in cement plaster (1:3) using coarse sand mixed with integral water proofing compound trowel even and smooth with steel trowel on sunken surfaces (Note : WPC shall be measured and paid separately) (c) Applying first coat of chemical pidifin 2K(Dr Fixit) on cleared RCC surfaces @ 0.86 Kg/Sqm (Minimum) as recommended by manufacturer. (d) Provide a layer glass fibre mesh of size 2.25mm x2.25mm (45 GSM) over first coat of chemical Pidifin 2K as per manufacturers recommendation. (e) Applying second coat of chemical Pidifin 2K (Dr Fixit) / eqivalent @ 0.86 Kg/Sqm (minimum) layer glass fibre mesh of size 2.25mm x 2.25mm (45 GSM) as recommended by manufacturers. Note: The plan area of floor shall be considered for payment.

M&L for PCC, 1:5:10, type E-2, using 40mm graded stone aggregate as in filling of sunken floors etc complete all as specified and directed.

M&L 40 mm dia GI pipe medium grade, made to shape as in spout pipe in sunken/ verandah/ Balcony complete all as specified and directed.

M&L for PCC (1:3:6), type C-2, (using 40mm graded stone aggregate) 75mm thick as in plinth protection including making grooves complete all as specified and directed.

Demolition of RCC of any descrition such chajja, shelves etc and in any position not other wise specially provided for complete all as specified and directed by Engineer in Charge. Note : Reinforcement cut as required to facilitate demolition.

M&L for reinforced cement concrete type B1 1:2:4 (20 mm graged stone aggregate) as in Slab supported on walls, beams and column in floors, roofs, landings, balconies, deck slabs and in shelves and etc. and setting in mortar complete with joints to match complete all as specified and directed.

M&L for TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified

Use and waste of form work torough finished surfaces of soffits of suspended slab such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick complete all as specified and directed.

Taking up or down GI tubing 15 mm bore pipe including cleaning for re-fixing or removal to store complete all as specified and directed.

Taking up or down GI tubing 20 mm bore pipe including cleaning for re-fixing or removal to store complete all as specified and directed.

Taking up or down GI tubing 25 mm bore pipe including cleaning for re-fixing or removal to store complete all as specified and directed.

S&F GI tubing 15 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors complete all as specified.

S&F GI tubing 20 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors complete all as specified.

S&F GI tubing 25 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors complete all as specified.

All as per Ser item No 66.00 above but refixing 15 mm dia ,old steel tubing and connections in new or old possition (wall,ceiling and floors etc) complete all as specified and directed.

All as per Ser item No 66.00 above but refixing 20 mm dia, old steel tubing and connections in new or old possition (wall,ceiling and floors etc) complete all as specified and directed.

All as per Ser item No 66.00 above but refixing 25 mm dia, old steel tubing and connections in new or old possition (wall,ceiling and floors etc) complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good,cutting exceeding 20cm girth complete all as specified and directed.

S&F in repair Rotational moulded polythylene 500 capacity water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position including 20mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs 20mm gun metal globe or gate valve with iron wheet head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs 25 mm gun metal globe or gate valve with iron wheet head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair 15 mm dia bore fancy type chromium plated long body bib taps cast copper alloy with on/off handle, screwed down, screwed for iron pipe, or for brass ferrule complete all as specified and as directed.

S&F in repair 15 mm dia bore fancy type chromium plated bib taps cast copper alloy with on/off handle, screwed down, screwed for iron pipe, or for brass ferrule complete all as specified and as directed.

S&F Brass CP Basin mixer 15mm bore for mixing hot & cold water screwed down for iron pipe for Wash Hand Basin complete all as specified and directed.

S&F in repair Brass CP Wall mixer 15mm bore for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.

S & F in repair 15 mm bore chromium plated Angular stop valve of cast copper alloy screwed down high pressure with on/off handle screwed both ends for iron pipe or for unions and fixed all as specified and directed.

S & F in repair 15 mm bore chromium plated stop valve of cast copper alloy with long shank and cup (concealed type) ends for iron pipe or for unions and fixed all as specified and directed.

S & F PVC connection 15 mm size with PTMT nuts of length 600 mm of approved quality complete all as specified and directed.

S&F stainless steel plate racks of size 900mm x 600mm x 250mm and thickness of SS strip of 1mm fixed on wall etc complete all as specified.

S&F in repair sinks without drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair vitreous china counter wash basins, size 470x470mm white flat back to be fixed on granite/marble & RCC slab including cutting for and pinning in ends of brackets or erecting stand, including 32mm waste fittings, waste pipe, chromium plated with long screwed shanks & fly-nuts, flange end bedded in red lead cement and other end fixed.

S & F in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe including cement concrete bedding and connection to antisyphonage pipe etc including making good to floor complete all as specified and directed.

M&L in repair for 100 mm dia of long body CI 'P' or 'S' trap incluing jointing to waste pipe fixed in cement concrete 1:2:4, type B1 complete all as specified.

S & F PVC low level cistern of 10 ltrs capacity with top push buttion inclusive of brackets and PVC bend long type and connection to flush pipe of any size and pattern with inlet ball valve float and handle complete all as specified and directed.

S&F in repair brass chromium plated shower rose 125 mm of size with arm and with or without swivel joints to steel pipe or union complete all as specified and as directed

S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed.

M&L Towel Ring of stainless steel fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed

S&F PTMT soap tray any type and fixed to plugs on wall with chromium plated brass screws complete all as specified and directed.

S&F Stainless steel fancy type peg set of six and fixed in position with steel screws complete all as specified and directed.

M&L for 25mm dia PVC coated MS Pipe coloured curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing curtain rods any description with accessories complete all as specified and directed. Note : The cost of brackets and knobs is deemed to be included in the quoted rate.

Taking down rain water pipe and eaves gutters (any size and pattern) including all fittings heads shoes bends swan necks etc including cleaning or refixing or removal to store. Note : Measured overall as fixed along the centre line over fittings and accessories.

S & F 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls with MS clamps complete all as specified and directed.

S & F 110 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes complete all as specified and directed.

Dismantling and disconnecting existing CI soil waste/vent pipe 100 mm bore fixed to wall, laid in trenches including all fittings & accessories complete all as specified and directed.

Dismantling and disconnecting of existing CI soil waste/vent pipe 75 mm bore fixed to wall,laid in trenches incl all fittings & accessories complete all as specified and directed.

S&F 100mm dia Cast Iron soil waste & vent pipes in any length with or without ears, with cement joints but fixed to walls & fixing with clamps complete all as specified and directed.

S&F 75mm dia Cast Iron soil waste & vent pipes in any length with or without ears, with cement joints but laid in trenches / floors complete all as specified and directed.

S&F 100 bore, CI bends (any radius) incl heal rest bend, diminishing pieces or tapers (large bore measured) with oval access door as in repairs complete all as specified

S&F in repair 75mm bore, CI bends (any radius), diminishing pieces or tapers (large bore measured) complete all as specified and directed.

M&L in repair for 75mm dia of long body CI Floor trap with grating incluing jointing to waste pipe fixed in cement concrete 1:2:4 type B1 complete all as specified.

M&L Branch pieces, 100 mm bore, (equal or unqual), ordinary or inverted (spigot or socket type) or with oval acess door as in repairs complete all as specified and directed by Engineer-in-Charge.

M&L Branch pieces, 75 mm bore, (equal or unqual), ordinary or inverted (spigot or socket type) or with oval acess door as in repairs complete all as specified and directed by Engineer-in-Charge.

S&F in repairs CI cowls 100 mm complete all as specified and directed.

S&F Salt glazed stoneware gully traps of size 150x 150 mm, square or round mouthed, type 'P complete all as specified and directed.

Taking down cement plaster from brick walls/ ceiling or concrete of any description,racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick in patches in cement mortar 1:6 on other than fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in patches in cement mortar in 1:4 on fare face of brick work or concrete surfaces even and smoothe without using extra cement & with using integral water proofing compound. Note : WPC shall be measured and paid for separately.

M&L for rendering 5mm thick in cement mortar in 1:3 on ceiling all as specified and as directed.

M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified. Note : Payment for providing grooves shall be made separately.

M&L for Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per pecifications and direction of the Engineer-in-charge

M&L for Acrylic polymer base damp-proof coating system with two component ready to use acrilyic ploymer modified damp-proof coating : (a) SURFACE PREPARATION: Remove the existing plastered surface with efflorescence/ seepage area. Non-moving cracks having width upto 5 mm must be filled with Polymer based crack filler. (b) APPLICATION: Apply acrylic polymer base damp proof coating by brush roller over SSD surface. Apply the first coat of damp proof coating with a paintbrush directly on the surfaces. Allow to dry for a minimum 2-3 hrs. Apply subsequent second layer after drying. The first coat and second coat must be applied in perpendicular direction. The coverage must be atleast 1.2 sqm/kg/coat. The mixing for two component, if required, shall be done as per manufactures specifications. Rendering to be carried out after approval of Eng in charge and shall be paid seprately. Note : Treatment shall be carried out through Authorized applicators only

M&L preparation of newly plastered or unplastered surfaces of wall and applying two coats of distemper oil emulsion white/tinted over 1mm coat of wall care putty finished even and smooth surface by hand roller complete all as specified and directed by Engr -in - charge.

M&L for complete removal of existing treatment of old decorated surfaces of wall by mechanical sander/ brooming down and scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and filling in depressions to make smooth surface and applying two coats of distemper oil emulsion white/tinted using hand roller complete over a coat of 1 mm wall care putty all as specified

M&L for complete removal of existing surface finishes of ceiling with mechanical sander/ manual method and applying two coats of white wash on old plasterd ceiling surfaces etc complete all as specified.

M&L for preparation of surfaces and applying two coats of white wash on newly plastered surface of ceiling etc complete all as specified.

M&L for complete removal of existing treatment of old decorated surfaces of wall by mechanical sander/ brooming down and scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots including filling depression of scraped surface with wall putty two coats 1.5 mm thick each and Finishing walls with Two coats of Acrylic Smooth exterior paint of required shade over and including one coat of of exterior primer complete all as specified

M&L preparation of newly plastered or unplastered surfaces of wall, soffits/ facia of chajja/ roof slab for applying Two coats of Acrylic Smooth exterior paint of required shade over and including one coat of exterior primer complete all as specified

M&L preparation of newly plastered or unplastered surfaces of wall applying three coats of White Wash complete all as specified and directed by Engr -in - charge.

M&L for preparation of old surface including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and making surface even and smooth andcomplete and then appplying two coats of white wash on old decorated plastered or un-plastered surfaces of walls etc all as specified & directed by Engineer-in-Charge.

M&L for preparation of old painted surfaces applying one coat of synthetic enamel paint (ordinary tint) on steel surfaces over 10cm width or girth complete all as specified and directed by Engineer - in - Charge.

M & L for applying one coat of synthetic enamel paint on wood and wood based surfaces of any description, over 10cm width or girth, not other wise described including preparation of old painted surfaces complete all as specified and directed.

M&L for Obliterating old writing of any description, n exc 0.1 sq. m, with paint to match existing work etc complete all as specified and directed by Engineer - in - Charge.

Dismantling of brickwork built in cement mortar of any description complete all as specified and directed as per Engineer-In-Charge

M&L brick work with sub class B bricks straight or curved on plan exceeding 6 mtr mean radius in cm 1:6 etc.complete all as specified and directed by Engineer - in - Charge.

All as per Ser item No 127.00 above but except bricks.

M&L for PCC type D-2, (PCC 1:4:8), (40mm graded stone aggregate) as in foundation complete all as specified and directed.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out soft soil complete all as specified and directed.

M&L Hard core of broken stone aggregate gauge not exc. 63mm deposited spread and leveled in layers not exc. 15cm thick watered and rammed to a true surface complete all as specified.

M&L for Machine pressed Precast cement concrete interlocking coloured (glossy finished / ruberised paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade with and including 40mm thick sand cushining complete all as specified and directed by Engr-in-charge.

M&L for precast cement concrete (1:2:4), type B1, using 20mm graded stone aggregate as in Kerb Stone of any section indicated with plain fair faces including chamfers weatherings throughting etc and setting in CM (1:4) complete with joints to match all as specified and directed by Engineer-in-Charge.

M & L for Preparation of new concrete surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint including priming paints complete all as specified.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation or for shafts, wells, cesspits, manholes, pier holes, laying cables/ poles/ stay assembly etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Demolition and breaking up drain pipes 150mm internal dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

M&L 150mm bore Salt-glazed stoneware drain pipes laid in trenches and jointed complete all as specified and directed.

M&L 150mm bore Concrete bed (PCC 1:3:6, type C2) to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

S&F in repair SFRC (Steel fibre Reinforcement concrete cover & frame ) HD-20mm, conforming to IS-12592, graded rectangular clear opening 560X560mm and fixed over manhole and make good of manhole complete all as specified and directed.

S & F in Repair Precast Cement Concrete ( type B0,1:2:4, using 12.5mm graded stone aggregate) as in louvres and jallies , 25mm thick set in CM 1:4 All as specified and directed by Engr in Charge

Dismantling of brick tiles or terracing tiles single layer on roof & disposal of retrieved material upto a distance n.exc 100m where directed, all as specified.

Demolition of mud in roof, any thickness including plastering and leaping (where full thickness removed or only a part there of disposal off rubbish upto a distance n.exc 100m, where directed.

M&L PCC 1:2:4, type B0, using (12.5 mm graded stone aggregate) as in roof kerbs complete all as specified and directed by Engr-in-Charge.

M&L 40mm thick PCC 1:2:4 type B0 (12.5mm graded stone aggregate) with WPC in roof complete all as specified and directed Note : WPC will be measured and paid separately.

M&L for rendering 10 mm thick in CM 1:4 with WPC on roof, fair faces of brick work or concrete surfaces all as specified and directed by Engr -in - charge. Note : WPC will be measured and paid separately

M&L for Roof Treatment as specified below and as directed : (a) Cleaning, washing of surface and removing all existing bitumen coatings/ APP membrane completely with intense wire brushing or high speed water jet. Surface should be free from any loose paint, dust or grease. (b) All cracks upto 3mm at corner joints, channels and parapets should be treated with crack seal and bigger cracks, damaged portions and hollow areas must be repaired with polymer modified cement mortars. (c) Applying one coat of PrimeSeal/ Epoxy Primer/ShaliUrethane BTD White diluted with potable water in the ratio of 1:1 and apply @ 0.40 kg/ sqm (0.20 kg BTD+0.20 Kg water) (d) Laying polyster reinforced fiber net/50 gsm Geotextile mesh, upto 300 mm on walls. (e) Applying three coat of HydroShield PUD microfibre reinforced UV resistent polyurethane (solid content 68% ) / Damp Proof ultra UV Stable fibre reinforced elastomeric liquid waterproofing membrane formulated with PU hybrid polymers (Solid content 55%)/ SmartCare PU Magnum elastomeric waterproofing coating based on hydrophobic polyurethane (solid content 85%)/Single Component Elastomeric Liquid Membrane ShaliUrethane BTD White/coloured (Elongation 400% ± 50, Solid Contents > 80% & Specific Gravity @ 30 OC 1.5 ± 0.03) @ total 2.00 Kg per sqm in two coats for maintaining thickness of 1.5mm, with paint brush/ roller upto 300 mm on walls. (f) The complete treatment to be carried out by authorised applicator of waterproofing manufacturer. Note : (i) The treatment shall be carried out as per the manufacturers instructions, and as directed by Engineer in Charge. (ii) The plan area of floor shall be considered for payment .

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified by Engr in charge

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge roof covering/ cladding to wall, fixed with self tapping screws as specified and directed.by engr in charge.

Dismantling framed work (truss), purlins of timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed.

Dismantling un-framed work timber scantlings, purlins 40 sq. cm and over in section, in any position complete all as specified and directed.

M & L for (Fe 410W grade E-250 quality A) MS roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel,Rectangular tubular Section or flat sections) including distance pieces, cleats etc complete all as specified and directed.

S&F wind ties for roof including securing bolts; cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L Mild steel screw bolts 12mm to 20mm in diameter (purpose made), Anchor Bolt with hexagonal or square head at one end and screwed at other or screwed at both ends ,each screwed end to be fitted with washers and one one hexagonal or square n.exc 30 cm long complete all as specified.

M&L brickwork with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in Cement Mortar 1:6 etc complete all as specified and directed.

M&L old size brickwork with fly ash bricks straight or curved on plan exc 6m mean radius wall built in cement mortar 1:4 complete all as specified and directed.

All as per Ser item No 158.00 above but except any type of bricks.

M&L RCC (1:1.5:3), Type A1, (20mm graded stone aggregate) (Nominal Mix) as in Beam, Cantilevers, bres summers, lintels over 1.5m span complete all as specified and directed.

M&L for form work to sides and soffits of floor or roof beam, beam, hauchings, girders, bressum-emers, lintels, cantilevers, shelves incl supports overhangs etc also splays between floors and beams, flat, rough finished surfaces of concrete

M&L for MS TMT Bars of 10 mm dia and over,cut to length,bent to shape required including cranking, binding spirally for hooping for columns hooking ends and biniding with and including MS wire (annealed) not less than 0.9 mm dia or securining with clip all as specified.

M&L for MS TMT Bars of 5 mm dia and over up to 10 mm dia in stirrups, spacers and binders,cut to length bent to shape required including cranking, binding spirally for hooping for columns hooking ends and biniding with and including MS wire annealed not less than 0.9 mm dia or securining with clip all as specified.

M&L for Glazed ceramic coloured tiles with highlighter in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick rendering in CM 1:4 on other than fair face of brick work. Note : Highlighter shall be provided as directed by Engr-in-Charge.

M&L for Rendering 15 mm thick in cement plaster 1:4 on surface other than fair face of brickwork or stone masonry surfaces or on one side of lathing, finished even and smooth without using extra cement complete all as specified and directed by Engr -in - charge.

M&L preparation of newly plastered or unplastered surfaces of wall and applying two coats of cement base paint complete all as specified and directed by Engr -in - charge.

M&L rough cast over rendering of 10 mm thick on fair face of brick or concrete surface as in CM 1:4 all as specified and directed by Engr-In-Charge. Note : The rough cast mixture shall consist of crushed stone or fine gravel aggregate, coarse sand & cement in the ratio of 1:1:1 over rendering coat complete all as specified and directed.

M&L for preparation of newly rough cast plastered surfaces of walls etc., and applying two coats of cement base paint complete all as specified & directed by Engr-In-Charge.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified & directed by Engr-In-Charge.

M&L for 100 mm thick PCC 1:2:4, Type B1, using 20 mm graded stone aggregates as in flooring & Finishing the Surface Even & smooth without Using Extra Cement complete all as specified and directed.

M&L for 100 mm thick PCC, 1:4:8, Type B1, using 40 mm graded stone aggregates as in Sub Base of flooring complete all as specified and directed.

Supply & fix coloured Machine pressed precast cement concrete interlocking paver blocks any shape and size conforming to IS-15658 -2006 of 80 mm thick M-35 grade with gray cement and pigment complete all as specified and directed.

M & L Sand cushion (25 mm thick) filling under floors or in foundation including watering and consolidated complete all as specified and directed.

S & F Precast kerb stones(factory made) in PCC 1:2:4, type B-1, including chamfers, weatherings,throatings etc in smooth finish & set in cement mortar 1:4 on sides of roads including necessary excavation embedding blocks in the ground to depth complete all as specified and directed.

M&L for PCC 1:3:6, Type C2, using 20 mm graded stone aggregates as in backfilling, flooring, (Bed Block) on Wall complete all as specified and directed.

S & F Mild Steel 1.0 mm, Plain, Black Sheet Covering to door shutters; covering to door chowkats (frames); etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required

S&F 100 mm long butt hinges, medium weight, cold rolled, mild steel and fixed complete all as specified and directed.

S & F Mild steel 150mm pressed handles, oval type, stove enamelled black complete all as specified and directed.

S&F box type Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay complete with glazing bars, dovetailed or welded all as specified and directed by Engineer-in-Charge.

S&F sheet glass of 3mm,ordinary quality and glazing with oil putty in squares n.exc 0.5 Sqm in each pane, complete all as specified.

M&L for 18/19mm thick both side prelaminated (One side decorative and one side plain) particle board exterior grade fixed with screws to timber frame work complete all as specified and directed.

S & F mild steel magetic catchers suitable to door shutter area up to 1.5 Sqm each complet all as specified and directed.

M&L for Plain fillets or beading of sectional area exc 6 & n.exc 13 sq.cm of 2nd class hard wood square, rectangular or triangular in section , clean sawn, se-cured with nails or brads for securing wiremesh or similar works put together with glue pinned at joints in complete all as specified and directed by Engineer - in - Charge.

S&F 150mm length floor door stopper of aluminium alloy body and tongue,anodised with hard drawan steel spring fixed in floor complete all as specified and directed.

M&L in repair to RCC fillet beams in ceiling with cement mortar 1:3 over applying a coat of neat cement slurry @ 3kg/sqm and one coat of Dr Fixit pidecrete URP by using 2 Sqm per 1 Kg URP + cement in the proportion of (1:1.5) and making pedicrete solution and applying by brush complete all as specified and directed.

S&F Rolled sections as in main and cross beams, hip and jack rafters all as specified and directed by Engineeer-in-Charge.

Supply only Liquid water proofing compound.

S&F non skid cweramic tiles 7 to 8mm thick (square/ rectangle) (coloured tiles) area of each tile exc 0.18 Sqm but n.exc 0.38 Sqm , as in floors set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles 15mm thick screed bed or bedding layer CM 1:4 for laying finishes, complete all as specified and directed by Engineer-in-charge.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. all as specified and directed by Engr-in-Charge.

M&L for point wiring complete with ISI marked 1.5 sqmm single core PVC insulated unsheathed cable 1100V grade FRLS with multistranded copper conductor drawn through concealed in wall/ceiling surface in existing PVC rigid concealed conduit suitable size with all accessories such as bend, reducers, MS hooks, MS junction boxes, 2mm thick galvanised steel pressed sunken terminal boxes of suitable sizes for mounting of switchs, sockets, fan regulator etc covered with 3 mm thick plastic laminated Hylem top cover sheet of required color fixed with brass screws and cup washers painting terminal boxes inside and outside with one coat red oxide primer including fixing and 1.5 sqmm copper conductor as earth continuity to connect common earth dolly completed for the following all as specified and directed by Engr-in-Charge :-

One light point/Fan point/Exhaust point controlled by one way switch

One light point controlled by one two way switch

One three pin socket out let 5 amps on the same board with other switches

One 3 pin, 5A switch socket outlet point on independent board

One bell point controlled by one bell push

All as per Ser item No 190.00 above but with 2.5 Sqmm cable for 1No 16 amps socket outlet point on independent board including 2.5 sqmm PVC insulated unsheathed cable multistranded with copper conductor green in colour as earth continuity conductor.

Supply and fixing in replacement PVC Lamp holder suitable for LED 5 to 20 watt blub complete all as specified and directed.

Supply and fixing LED bulb 1x10 Watt lamp having luminous efficancy warranty 2 year all as per specification & directed by Engineer-in-charge.

Supply and fixing in replacement of LED tube light fiting 20W, (4 feet long) 230 V, surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver and including connections up with copper conductor wire with suitable size as per specification and directed by Engineer-in-charge.

Supply and fixing in replacement of LED tube light fiting 10W, (2 feet long) 230 V, surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver and including connections up with copper conductor wire with suitable size as per specification and directed by Engineer-in-charge.

M&L ceiling rose 3 terminal / PVC / polycarbonate isolated body

M&L submain wiring in replacement with two single core PVC FRLS insulated copper conductor 6 sqmm and same 6 sqmm for continuous earth wire drawn in to existing concealed PVC conduit including taking down unserviceable old DB any type including MCB etc and including making good disturbed surfaces of walls as necessaty complete all as specified and directed by Engr-in-Charge. Note: Cost of earth wire including in sub main wiring.

S&F Piano type switch single pole 2 way 5/6 amps 230 volt AC supply complete all as specified and directed by Engr-in-Charge.

S&F bell push flush type 5 amps complete all as specified and directed by Engr-in-Charge.

S&F Bell ding dong AC 230V single pole complete all as specified and directed by Engr-in-Charge.

S&F Piano type switch single pole 1 way 5/6 amps 230 volt AC supply complete all as specified and directed by Engr-in-Charge.

S&F socket two in one 5/6 Pin, 5/6 Amps 230 volt AC supply complete all as specified and directed by Engr-in-Charge.

S&F Piano type switch single pole 1 way 15/16 amps 230 volt AC supply complete all as specified and directed by Engr-in-Charge.

S&F socket two in one 5/6 Pin 15/16 Amps 230 volt AC supply complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement (concealed flush to wall) factory made DB (made out of CRCA sheet not less than 1.2mm thick, fitted with DIN channel neutral link and 250 Amp rated bus bar) VTPN, 4 Way, suitable for mounting MCCB/MCB, conforming to IS-13032, DB shall be semi glosy finished with epoxy polyster based powder paint sprayed and backed at high temperature between powder paint process to ensure smooth finish and protection against corrosion atmosphere. The DB shall be double door type with hinged door with locking arrangement, the DBs shall be same make as MCBs, DB shall be provided with level marking indicating the incoming and outgoing circuits on always as specified. The DBs shall be of IP-42 protection class, including taking down unserviceable old DB any type including MCB etc and including making good disturbed surfaces of walls as necessaty complete all as specified and directed by Engineer-in-charge. Note :- MCCB/MCB shall be measured and paid separately under appropriate item of BOQ.

S&F sheet metal enclosure for DB's SPN 230 volts 8 way double door including taking down unserviceable old DB any type including MCB etc and including making good disturbed surfaces of walls as necessaty complete all as specified and directed by Engr-in-Charge.

S&F MCCB 4 pole, 415 V. adjustable type, 100 Amps with breaking capacity 16 KA complete all as specified and directed by Engr-in-Charge.

Supply and fixing amp rating 240V, 10KA 'B' curve miniature circuit breaker (MCB) of SPN current carrying capacity 5 to 32 AMP and in the MCB DB complete with connection testing and commissioning complete all as specified and directed by Engr-in-Charge.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single pole and current carrying capacity 40 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed by Engr-in-Charge.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed by Engr-in-Charge.

M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 Mtr below ground level with top edge of earth plate at a depth not less than 1.5 Mtr below ground level, earth plate surrounded by 15cm thick packed layer of charcoal dust and common salt, connected to galvanized iron earth lead wire 4mm dia by means of bolts, nuts and washers of galvanized iron or steel and thimbles upto equipment and other end of the earth wire connected to earthing test point and protected by galvanized iron pipe light grade 15mm dia upto earthing test point / equipment fixed with 2 Nos. of mold steel clamps made out of 25mm x 3mm flat iron and preforated water pipe 20mm dia galvanized iron pipe heavy grade 2.25 Mtr long and top with socket and plug and bottom connected to earth plate by silt and two bolts / nuts / washers complete with funnel and wire mesh, PCC chamber in cement concrete (1:3:6) type C-1 and cast iron cover with frame all as shown on electrical plate No. 3 of MES Schedule Part - I of SSR-2009 including taking down old Unserviceable earthing any type complete all as specified and directed by Engineer-in-Charge. Note : (i) Outer edge of earth pit will be 1 Mtr away from the outer edge of PCC Chamber. (ii) Galvanized iron earth wire 4mm dia upto earthing test point / equipment is encluded in this item. (iii) Water pipe shall be provided in slainting position.

Supply and spread dry fine aggregate sand in trenches for cable cushioning all as specified on both top and bottom of cable including ramming all all as specified and directed by Engr-in-Charge. Note : For the purpose of payment the punned thickness only measured.

Supplying and laying factory made un-reinforced precast concrete cable cover, class EHV, type 1 with peak, size 250mm x 150mm x 40mm standard size laid in trenches of across the cable protection all as specified and directed by Engr-in-Charge.

Supply and Laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 Sqmm 4 core in trenches/floors/wall and under road including connecting with suitable aluminium lugs and including taking up defective unserviceable cable of the any sizes all as specified and directed by Engr-in-Charge. Note: Earth work, Sand cushioning, GI pipe and cable cover for protection to be measured and paid separately.

Supply and fixing in replacement energy efficient LED Security light fitting of 25W pressure die cast aluminium housing/body, heat resistant clear toughened glass, better optics for uniform distribution street/Roadway luminaire, with driver, including electric connection, complete fitting with all accessories and following specifications, including taking down old Unserviceable light fitting any type complete all as specified and directed by Engineer-in-Charge :- (a) Lumen system efficacy of luminaire should be minimum 100 Lumen per watt. (b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 10°C to Plus 50°C (d) Power factor : Minimum 0.95 (e) THD : Max10%. (f) IP rating : IP66. (g) IK rating : Minimum IK07 (h) Built in potted LED Driver of the same make as of the luminaire. (j) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (k) Surge protection 10 kV (inbuilt + extended) (l) CCT : 5700 K. (m) CRI : Morethan 80 (n) Lens - High Efficiency wide angle lens. (o) BIS Approved fixtures and driver (p) Rated life time : 50000 burning hrs (Average 10 to 12 hrs daily)

M& L for Gun-metal, globe or gate valves, 25 mm bore of pipe with iron wheel head, screwed both ends for iron pipe and fixed including taking down old Unserviceable gate valve any type complete all as specified.

Supply and laying steel water Tubeing, 40 mm dia ISI Marked, '“light grade' galvanised, including tube fittings Viz Tees Socket bends elbows, union nipple etc screwed and socketed joint laid in trenches/under road with all fitting including taking down old Unserviceable pipe any type complete all as specified.

Supply and fixing complete set of 1x10 watt LED retrofit type bulkhead fitting luminaries die cast aluminium alloy body heat resistant prismatic glass cover with specially designed gasket lamp holder etc complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size including taking down old Unserviceable light fitting any type as per specification & directed by Engr-in-charge.

Supply & fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 245 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as directed.

Supplying and fixing and commissioning of electric water heater (Geyser) storage type ABS body of capacity 25 litre, BEE approved 5 Star rating, 230 V , single Phase, AC supply, inner tank made out of heavy duty stainless steel sheet (Designed with single weld line, factory tested with hydraulic pressure as per latest IS code) with glass lined coating complete with all accessories such as safety valve, thermostate, NRV, connection piece PVC connection for HOt and cold water, three core PVC insulated PVC Sheathed copper conductor flexible cable including 15 Amp plug suitable for existing socket and fixing material, 04 no Nut bolt grouting in wall in PCC (1:2:4) using 12.5mm graded stone aggregate for hanging the geyser and making good the disturbed surface complete all as specified and directed by Engr-in-Charge.

Re-Fixing only electronic/electric meter single phase complete with accessories any size. two core copper flexible wire not less than 0.5 mtr for connecting from incoming to outgoing any size complete all as specified and directed by Engr-in-Charge.

Supply and fixing exhaust fan steel body, AC single Phase 230V, 50 Cycle per second, size 300 mm sweep with blades and frame including self closing GI louvers off mode protection against birds etc mounted in suitable opening arrangement and connecting up and including three core PVC Insulated PVC Sheathed copper conductor flexible cable1.0 Sqmm drawn in flexible PVC conduit and hanging on wall with 4 Nos steel fastners 10mm dia 100mm long including hole in wall and making good the disturbed surface complete all as specified and as directed by Engineer-in-charge.

Re-Fixing only Exhaust fans complete with accessories any size. Three core copper flexible wire not less than 0.5 mtr for connecting from ceiling rose/connector to exhaust fan any size complete all as specified and directed by Engr-in-Charge.

M&L submain wiring with two single core PVC FRLS insulated stranded copper conductor cable of size 4 sqmm and same 4 sqmm for continuous earth wire drawn in to concealed PVC conduit of suitable size and making good to disturbed area complete all as specified and directed by Engr-in-Charge. Note: Two run of wire, one run of earth wire and one run of PVC conduit shall be measured as one unit.

S & F DBOXx SRCD (Socket Residual Current Device) is ready plug & play all -in-one device that provides protection to humans from electric shock due to direct or indirect contact as well as provides protection from overload and short circuit faults Single pole complete with one SPN MCB 20 Amps, 240 V, AC supply, and plug top all type as specified and directed by Engr-in-Charge.

Supply and laying Rigid non-metallic PVC conduit size 25 mm exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc with all fitting including taking down old Unserviceable pipe any type complete all as specified.

Vinod Kumar Bajaj

M/s Balvinder Singh Engineer and Contractors

NEW AMRITSAR CONSTRUCTION COMPANY