Construction of 128 Nos. of PC/HC quarters with development works at NAGERCOIL Armed Reserve Campus in Kanniyakumari District

Amount

1.1) Earth work excavation for foundation in all soils (including refilling) a. 0 to 2 mt.

b. 2 to 3 mt.

1.5) Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 mt.

b. 2 to 3 mt.

1.6) Earth work excavation for Open foundation for drains (excluding refilling) width upto 1.25 m a. 0 to 2 mt.

2.6) Supplying and filling with 40mm HBSJ

2.7) Supplying and filling with 20mm HBSJ

7.2) Supplying and fixing of Bituminous filler pad, 20 mm tk. for expansion joint

13.1) Filling with excavated earth

16.2) Supplying and fixing of Terra cotta jally (not less than 50mm) a) In Ground Floor

b) In First Floor

c) In Second Floor

d) In Third Floor

21.2) Teak wood Wrought & Put up a. T.W. over 2.00 m & below 3.00 m

b. T.W. below 2.00 m length.

23.3) Supplying and fixing of Magnetic door catches

25) Supplying and fixing of MS hold fast

30) Ellispattern flooring

31) Weathering course over roof slab with proportion of brick jelly 20mm to lime (32:12 1/2) by volume

37.1) White washing 3 coats (slaked)

39) Supplying and fixing of MS Grills in position

40) Painting 2 coats - New "wood work"

41) Painting 2 coats - New "iron work"

46) Supplying and fixing of 20 mm dia Alu. Hanger Rod

47) Supplying and fixing of Alu. Towel rail 75 cm long

48) Supplying and fixing of 5 pin Coat stand

49) Supplying and fixing of Chromium plated 8 gauge picture hook

50.3) Supplying and planting avenue trees

50.4) Providing Tree guard

52.1) Supplying and fixing of G.I. Pipe 20mm dia for hot water line (Fully concealed in walls)

53.3) Supplying and fixing of C.I. steps (5 Kg)

61.2) Supplying and laying and loose jointing the following dia stone ware pipes with ISI mark Superior variety (glazed) with spigot and socket ends in dry conditions b. 150 mm dia

62.1) Supplying and fixing of the following dia stone ware bend Superior variety b. 150mm dia

Electrical arrangements 72) Supplying and fixing of Box type Fibre Fan hook

73.1) Supplying and fixing of 3 phase Distribution board with 6 way per phase and 32A Fuse unit per way with neutral link

74) Charges for fixing of "Fan"

76) Supplying and fixing of 8 SWG G.I. wire

77.3) Supplying and fixing of TV/Telephone line Socket

77.4) Supplying and fixing of 20mm dia PVC pipe for TV/Telephone line

78) Providing Earthing Station using pipe electrode as per IS3043 (Type I)

86) Providing Pre-constructional Anti termite treatment

238) Anticorrosive treatment for steel grills

Annexure 1.9.1) Earthwork excavation in narrow trenches for pipe laying works for water supply and sewerage works in hard stiff, stiff black cotton, hard red earth and earth mixed with small size boulders

2.1.1) Supplying and filling the basement with gravel

2.1.3) Supplying and filling with Crushed stone sand

3.1.1) C.C.1:5:10 using 40mm size HBSJ for Foundation & Basement using crushed stone sand

3.2.1) P.C.C. 1:2:4 using 20mm size HBSJ for Foundation & Basement and other similar works using crushed stone sand

3.3.1) P.C.C. 1:8:16 using 20 mm broken brick jelly using crushed stone sand

3.10.1) P.C.C. 1:3:6 for vertical wall with 20mm HBG Metal using crushed stone sand for foundation and basement

4.5.1) Standardized Concrete mix M30 Grade using crushed stone sand a. In Foundation and basement

6.6.1) Brick work in C.M. 1:5 (F& B) using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 ¾ " x 4 ¼ " x 2 ¾ ") using crushed stone sand

8.5.1) Standardized Concrete mix M30 Grade using crushed stone sand a. In Ground Floor

b. In First Floor

c. In Second Floor

d. In Third Floor

e. In Fourth Floor

9.6.1) Brick work in C.M. 1:6 using Kiln Burnt Country bricks of size 22x11x7cm (8 ¾ " x 4 ¼ " x 2 ¾ ") using crushed stone sand a. In Ground Floor

b. In First Floor

c. In Second Floor

d. In Third Floor

e. In Fourth Floor

10.6.1) Brick partition work in C.M. 1:4 using Kiln Burnt Country bricks of size 22x11x7 cm (8 ¾"x4 ¼ "x2 ¾") 110 mm tk (B.P.) using crushed stone sand a. In Foundation and basement

b. In Ground Floor

c. In First Floor

d. In Second Floor

e. In Third Floor

f. In Fourth Floor

11.6.1) Brick work in C.M. 1:4 using Kiln Burnt Country bricks of size 22x11x7cm (8 ¾ " x 4 ¼ " x 2 ¾ ") using crushed stone sand 70 mm tk (B.P.) a. In Ground Floor

b. In First Floor

c. In Second Floor

d. In Third Floor

12.1.1) Brick partition work in C.M. 1:4 using kiln burnt Country bricks of size 22 x11x 5 cm (8 ¾ "x 4 ¼ "x 2 ") using crushed stone sand 50mm tk. a. In Ground Floor

b. In First Floor

c. In Second Floor

d. In Third Floor

14.2.1) Precast Cupboard slab in standardised concrete mix M30 Grade by using 3mm - 10mm HBGS Jelly 40MM Thick a. In Foundation & Basement

15.1.1) Cuddapah Slab 20mm tk. for cupboard slab / Similar works a. In Ground Floor

b. In First Floor

c. In Second Floor

d. In Third Floor

15.2.1) Cuddapah Slab 40mm tk. for cupboard slab / Similar works a. In Ground Floor

b. In First Floor

c. In Second Floor

d. In Third Floor

16.2.2) Precast Jally ventilator 50mm thick using standardised concrete mix M30 Grade using crushed stone sand a. In Ground Floor

b. In First Floor

c. In Second Floor

d. In Third Floor

e. In Fourth Floor

18.1) Formwork using M.S.Sheet a. For Column footings, plinth beam, Grade beam, Raftbeam, Raft slab etc.,

b. Plain surfaces such as Roof slab, floor slab, Beams, lintels, lofts, sill slab, staircase, portico slab and other similar works

c. For Square and rectangular columns and small quantities

d. For Vertical wall

f. For Curved surface

21.5.2) Supplying and fixing of soild UPVC door shutter with frame

21.6.2) R.C.C. Door frames of size 100x75mm with one edge grooves size 't' x 20mm using standardised concrete mix M 30 Grade using crushed stone sand a. 900 x 2100mm

22.3.3) Cup board/ward robes double leaf shutters using 9mm thick phenol bonded BWR grade plywood, TW frames, styles & rails including two coat enamel paint over one coat primer with brass screws

23.1.1) T.W.single leaf door shutter using 9mm thick phenol bonded BWR grade plywood with brass screws. Suitable for door of size a. 900 x 2100mm

23.4.1) Supplying and fixing of Aluminium openable window with 4mm thick Glass a. 1.80x1.35 mt. window (Three leaves)

b. 1.35x1.05 mt. window (Two leaves)

c. 1.35x1.35 mt. window (Two leaves)

26.1) Flooring in C.C.1:5:10 using 40mm size HBSJ using crushed stone sand

28.1) Floor plastering in C.M. 1:4, 20mm thick. using crushed stone sand

29.8.1) Supplying and fixing of Glazed tiles using Grout (Tile Joint Filler) using crushed stone sand

29.9.1) Supplying and laying of Floor ceramic tiles (Anti-skid) using Grout (Tile Joint Filler). using crushed stone sand

32.1.3) Finishing the top of terrace floor with one course of Anti reflective ceramic tiles (Cooling tiles) 305mmx305mmx7mm tk in C.M 1:3 20mm tk including Base concrete using crushed stone sand

33.1) Plastering in C.M. 1:5, 12 mm tk. using crushed stone sand

34.1) Plastering in C.M. 1:4, 12 mm tk. using crushed stone sand

35.1.1) Plastering in CM 1:3, 12 mm tk. with WPC using crushed stone sand

35.2) Spl. Ceiling plastering in C.M 1:3, 10 mm tk. using crushed stone sand

36.1) Plastering for Border in C.M. 1:5, 12 mm tk. using crushed stone sand a. 150 mm wide

b. 75 mm wide

c. 50 mm wide

38.4.1) Two coat of Oil Bound Distemper over the primer coat of white cement

38.6) Primer coat using one coat of white cement over the cement plastered/ concrete new wall surfaces or other similar works

43.1.1) Supplying, Fabricating and fixing of Mild steel / RTS grills (without cement slurry wash) reinforcement for all sizes of rods (Binding Wire insulated with PVC)

44.2.1) Rain water harvesting using defunct borewell and providing perforated cover slab in Standardised concrete mix M30 Grade by using 3mm-10mm HBGS Jelly a) Providing pit

b) Augering 30cm dia

44.6.1) PVC SWR 110 mm dia with ISI mark type-A for rain water down fall pipe (UPVC Special Clamp)

45.1) Providing Stucco plastering 12mm thick., using Colour Marble chips of size 10mm and below using 72.00 kgs of cement 14.50 kgs of colour cement and 0.15 cum of colour Marble chips for every 10 sqm area over the existing plastered surface

50.5.1) Supplying fabricating and erection of M.S Scheme name board using crushed stone sand

50.6.1) Precast slab 50 mm tk.in C.C. 1:3:6 mixed with fibre using crushed stone sand

52.2) Supplying, laying, fixing and jointing the following pipes as per ASTM D-1785 of schedule 40 including the cost of suitable UPVC specials with PVC special clamps etc., a. 32 mm dia

b. 25 mm dia

52.4.1) Supplying, laying, fixing and jointing the following pipes as per ASTM D-1785 of schedule 40 including the cost of suitable UPVC specials with PVC special clamps etc., (fully consealed in walls) c. 20mm dia

53.4) Supplying and fixing of CI Manhole cover of size 60 x 60cm (50kg weight)

53.5) Supplying and fixing of Wash hand basin (white) of size 550 mm x 400 mm

54.1.2) Supplying and fixing of 15mm dia Engineering Polymer Tap (Long body)

54.2.2) Supplying and fixing of 15mm dia Engineering Polymer Tap (Short body)

56.3.2) Supplying and fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR Grade 'P' or 'S' trap - in G.F. using crushed stone sand

56.4.2) Supplying and fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR Grade 'P' or 'S' trap - Other than G.F. using crushed stone sand

57.2) Supplying and fixing of EWC (White) 500mm with PVC SWR grade "P" or "S" Trap

58.3) Supplying and fixing of PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia

58.4) Supplying, Laying & Concealing the 50mm dia PVC (SWR) pipe with ISI mark type - 'B' with relevant specials.

58.5) Supplying and fixing of PVC (SWR) pipe with ISI mark - type 'A' for Ventilating shaft with cowl a) 110mm dia PVC SWR pipe of 3m with required PVC cowl & PVC specials etc.,

59.5.2) Supplying and fixing of Gully Trap using Kiln burnt country bricks of size 22 x 11 x 7 cm. using crushed stone sand

60.1) Supplying and fixing of PVC Nahani trap (4way/2way) using crushed stone sand

61.1.1) Supplying and fixing of UPVC Non Pressure Pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a) 110mm dia UPVC Non Pressure pipe

b) 160mm dia UPVC Non Pressure pipe

62.1.1) Supplying and fixing of PVC Bend fabricated 6 KSC PVC specials as per IS 10124/1982 Part II a) 110mm dia PVC Bend

62.2.1) Supplying and fixing of PVC Equal Tee (mould) BIS 7834/1975 PVC specials as per IS 10124/1982 Part-II a) 110mm dia PVC Equal Tee

64.1.1) Wiring with 1.5 sqmm Copper PVC insulated unsheathed single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 1.1 K.V. grade cable in fully concealsed PVC rigid conduit pipe heavy duty with ISI mark with suitable size PVC box (Fire Retarded Box) a. Light point with ceiling rose

b. Light point without ceiling rose

c. Calling bell point with Buzzer/Calling bell

65.1.1) Wiring with 1.5 sqmm Copper PVC insulated unsheathed single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 1.1 K.V. grade cable in fully concealsed PVC rigid conduit pipe heavy duty with ISI mark with suitable size PVC box (Fire Retarded Box) for Fan Point

66.1.1) Wiring with 1.5 sqmm Copper PVC insulated unsheathed single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 1.1 K.V. grade cable in fully concealsed PVC rigid conduit pipe heavy duty with ISI mark with suitable size PVC box (Fire Retarded Box) for Staircase Light Point.

67.1.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point PVC box (Fire Retarded Box) Switch Board Itself.

68.2.1) Wiring with 1.5 sqmm Copper PVC insulated unsheathed single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 1.1 K.V. grade cable in fully concealsed PVC rigid conduit pipe heavy duty with ISI mark with suitable size PVC box (Fire Retarded Box) for 5 amps 5 pin plug socket point at Convenient Places.

69.1) Supplying and fixing of 15 amps 3 pin flush type plug using (PVC Box, Fire Retarded Box)

71.2) Supplying and fixing of 32 Amps triple pole main switch

75.1.2) Supplying and delivery of fan with electronic dimmer with ISI mark a) 48" (1200mm) sweep

77.6) Run off 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 in fully concealed.

77.7) Run off 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 in fully concealed

80.1) Supplying and fixing of 450x375x20mm T.W. plank

87.1) Supplying and fixing of Three Phase ELCB/RCCB

87.2) Supplying and fixing of 20 Amps DP plug and socket in sheet enclosure with 32A DP MCB in Flush with wall with earth connection (For AC Plug)

99.1) T.W.single leaf Panelled door shutter with brass fittings Suitable for door of size a. 1000 x 2100mm

100) Supplying and fixing of 9 watts LED Bulb

101) Supplying and fixing of 25 watts LED bulb with street light fittings

102) Supplying and fixing of 4'18 watts crystal LED tube light

103) Supplying and fixing of Bulk Head fitting suitable for 12 watts LED bulb

104) Supplying and fixing of 12 watts LED bulb for bulk head fittings

112.1) Supplying and fixing of Exhaust Fan 225mm dia

114) Supplying and delivery of following PVC Aluminium armoured LTUG cable a) 3.5 core 70 Sqmm PVC Aluminium armoured LTUG cable

b) 3.5 core 35 Sqmm PVC Aluminium armoured LTUG cable

115) Labour charges for laying of PVC Aluminium armoured LTUG cable below ground level

116) Labour charges for laying of PVC Aluminium armoured LTUG cable above ground level

117) Supplying and fixing of Brass cable Gland suitable for PVC Aluminium armoured LTUG cable a) 3.5 core 70 Sqmm brass cable gland

b) 3.5 core 35 Sqmm brass cable gland

117.1) Supplying and fixing of cable end terminator suitable for following PVC Aluminium Armoured LTUG cable a) Crimping Lugs for 3.5 core 70 Sqmm. Aluminium Armoured LTUG cable

b) Crimping Lugs for 3.5 core 35 Sqmm. Aluminium Armoured LTUG cable

119) Supplying and delivery of 2 HP submersible pumpset single Phase suitable for borewell Duty - 20 lpm x 125m

119.1) Supplying and delivery of 3 HP Centrifugal Monoblock pumpset three Phase suitable for borewell Duty - 35 lpm x 100m

120) Labour charges for erection of submersible pumpset in borewell / open well upto 5 HP

120.1) Labour charges for erection of Upto 3 HP Horizontal shaft, Centrifugal pumpset

121.1) Supplying and delivery of DOL starter with single phasing preventor with Analog Ammeter and Voltmeter

121.2) Supplying and delivery of direct online starter DOL starter with single phasing preventor with analog ammeter and voltmeter

122) Supplying and fixing of following dia UPVC/GI/GM specials a) 50 mm dia GM Non Return valve

b) 50 mm dia GI Union

c) 50 mm dia GI Hex Nipple

d) 50 mm dia GI Tee

e) 50 mm dia brass foot valve

f) 50 mm dia UPVC Elbow

g) 50 mm dia UPVC wheel valve

h) 32 mm dia GI Coupling

i) 32 mm dia GI Elbow

j) 32 mm dia GI Hex Nipple

k) 32 mm dia brass Non return valve

l) 32 mm dia GI submersible adoptor

m) 32 mm dia UPVC Elbow

n) 32 mm dia UPVC Coupling

o) 32 mm dia UPVC FTA

p) 32 mm dia UPVC MTA

q) 50 mm dia UPVC Coupling

r) 50 mm dia UPVC FTA

s) 50 mm dia UPVC MTA

t) 50 x 32 mm dia UPVC Reducer Tee

u) 32 mm dia GM Gate valve

v) 32 mm dia GI Union

w) 65 mm dia GI Bend

x) 65 mm dia GI Elbow

y) 65 mm dia GI Coupling

123) Supplying and Delivery of 3 core of 4 Sqmm flat type copper cable

124) Supplying and delivery of following dia GI pipes 'B' class in position a) 25mm dia GI pipe

b) 65mm dia GI pipe

125) Supplying and laying of following dia of UPVC pipe a) 50mm dia UPVC pipe

b) 32mm dia UPVC pipe

126.1) Supplying and fixing of folllowing dia MS Clampset a) 65mm dia M.S.Clamp set

126.2) Supplying and fixing of folllowing dia MS Bore Clamp set a) 150mm dia MS Bore clamp set

127) Supplying and delivery of Nylon rope for tieing of submersible motor pump

129.1) Supplying and fixing in position of TNPHC Logo emblem a) 60 cm size

130) Supplying and fixing of Aluminium Die casting letters a) 23 cm size letter

b) 15 cm size letter

c) 10 cm size letter

131) Supplying of 6 lever Lock and Key etc.,

131.1) Supplying of 7 lever Lock and Key etc.,

132.2) Drilling Pilot bore of 140mm / 150mm dia any where in Tamilnadu including Transporation from one place to another within Tamilnadu in alluvial soil sedimentary strata or clay and sand stone shale pebbles boulders etc., a) Upto 60m depth

b) From 61m depth upto 90m depth ending below ground level

132.3) Reaming of 140/150 mm dia pilot bore to 300mm dia bore a) Upto 60m depth ending below ground level

b) From 61m depth upto 90m depth ending below ground level

133) Supplying and fixing of following dia PVC casing pipe a) 150mm dia PVC Casing pipe

b) 150mm dia PVC Ribbed screen pipe

134) Supplying and fixing of 160mm dia PVC end cap for covering the borewell etc.,

156) Supplying and fixing of 3 Nos. of 100 Amps 500 volts grade porcelain fuse unit

156.2) Supplying and fixing of 3 Nos. of 63 Amps 500 volts grade porcelain fuse unit

157) Metering panel for 10 services (8 flats + 1 common + 1 spare) 8 in 1 (G+3)

158) Supplying and fixing of 250A change over / rotary switches

161) Supplying and fixing of single pole 6 Amps to 32 Amps MCB

162) Supplying and fixing of 4 Pole 63 Amps Isolator

238.1) Anticorrosive treatment for window grills

344.2) Supplying and fixing of Bevelled Edge Mirror of size 500x400x5.5mm

367) Providing wooden melamen polish for main door new wood work

378.2) Supplying and fixing of Vitrified tiles (Ivory) in CM 1:3, 20mm tk using crushed stone sand

379.6.1) Supplying and fixing of Granite tile of size 2'x1', 10mm tk (Jet Black) for Kitchen hearth slab in cm 1:3, 12mm tk using crushed stone sand a. In Ground Floor

b) In First Floor

c) In Second Floor

d) In Third Floor

383) Supplying and fixing of Cuddappah sink 600x600x200 mm

383.2) Providing single nosing to the edges of granite tile 10mm tk

384) Supplying and fixing of PVC flushing cistern

448.2) Providing Tee with end cap 32mm dia instead of PVC Bottle trap

796) Two coat of Plastic emulsion paint including primer for outer wall surfaces

Johnsun Engineering Contractors

VIJAY RANI CONSTRUCTION