GE (P) AF/Gur-07/2020-21

Amount

Excavation of trenches in soft/loose soil, not exceeding 1.5 meter wide & not exceeding 1.5 meter in depth and getting out, trimming the sides forming bottom surfaces top required level complete all as specified and directed by Engineer-in-Charge

Returning, filling in trenches including spreading, leveling, watering and well ramming in layers not exceeding 25cms thick in each layer of solid complete all as specified and directed by Engineer-in-Charge.

Removing surplus excavated soil to a distance n’exc 50 meters and depositing where directed at a level not exceeding 1.5 meter above the starting point all as specified and directed by Engineer –in-Charge.

Supply and fixing in replacement galvanized iron tubing 100mm bore medium grade with all fittings laid in trenches floor/ road including taking out old GI pipe complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement galvanized iron tubing 80mm bore medium grade with all fittings laid in trenches floor/ road including taking out old GI pipe complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement galvanized iron tubing 50mm bore medium grade with all fittings laid in trenches floor/ road including taking out old GI pipe complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement galvanized iron tubing 40mm bore medium grade with all fittings laid in trenches floor/ road including taking out old GI pipe complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement galvanized iron tubing 25mm bore medium grade with all fittings laid in trenches floor/ road including taking out old GI pipe complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement galvanized iron tubing 20mm bore medium grade with all fittings laid in trenches floor/ road including taking out old GI pipe complete all as specified and directed by Engineer-in-Charge.

Taking out galvanized iron tubing 20 mm bore medium grade with joints , cleaning properly and refixing in the same or different location with new GI ISI marked fittings where ever required complete all as specified and directed by engr in charge.

Taking out galvanized iron tubing 25 mm bore medium grade with joints , cleaning properly and refixing in the same or different location with new GI ISI marked fittings where ever required complete all as specified and directed by engr in charge.

Taking out galvanized iron tubing 40 mm bore medium grade with joints , cleaning properly and refixing in the same or different location with new GI ISI marked fittings where ever required complete all as specified and directed by engr in charge.

Taking out galvanized iron tubing 50 mm bore medium grade with joints , cleaning properly and refixing in the same or different location with new GI ISI marked fittings where ever required complete all as specified and directed by engr in charge.

Supplying and Fixing of sluice valve cast iron size 100mm bore PN 1.6 with brass spindle and fly nut flaged both ends and drilled for jointing wheel head type including two flanged joints with nuts, bolts and washer, rubber insertion packing etc including taking out old sluice valve complete all as specified.

Supplying and Fixing of sluice valve cast iron size 80mm bore PN 1.6 with brass spindle and fly nut flaged both ends and drilled for jointing wheel head type including two flanged joints with nuts, bolts and washer, rubber insertion packing etc including taking out old sluice valve complete all as specified.

Supplying and Fixing of sluice valve cast iron size 150mm bore PN 1.6with brass spindle and fly nut flaged both ends and drilled for jointing wheel head type including two flanged joints with nuts, bolts and washer, rubber insertion packing etc including taking out old sluice valve complete all as specified.

Supply and laying cast iron pipe spigot and socket ends centrifugally cast, Class LA, in any length laid in trenches of sizes 150mm dia including taking out old GI/CI/DI pipe line complete all as specified and as directed by Engr-in-charge.

Supply and laying cast iron pipe spigot and socket ends centrifugally cast, Class LA, in any length laid in trenches of sizes 100mm dia including taking out old GI/CI/DI pipe line complete all as specified and as directed by Engr-in-charge.

Supply and laying cast iron pipe spigot and socket ends centrifugally cast, Class LA, in any length laid in trenches of sizes 80mm dia including taking out old GI/CI/DI pipe line complete all as specified and as directed by Engr-in-charge.

Supply and laying for DI ductile iron pipe K-7 spigot and socketed type suitable for tightend joint of size 150mm dia including taking out old CI/DI pipe line complete all as specified and as directed by Engr-in-charge.

Supply and fixing cast iron air release valve of size 100mm as per G & K catalogue H-7 double orifice flanged PN 1.0 including both side joints complete all as specified and as directed by Engr-in-charge.

Dismantling of PVC tank 500 to 1000 ltr capacity complete all as specified and as directed by Engr-in-charge.

Supply and fixing of Gun Metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed of size 50mm bore including taking down old valve complete all specified and as directed by Engr-in-Charge.

Supply and fixing of Gun Metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed of size 40mm bore including taking down old valve complete all specified and as directed by Engr-in-Charge.

Supply and fixing of Gun Metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed of size 25mm bore including taking down old valve complete all specified and as directed by Engr-in-Charge.

Supply and fixing of Gun Metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed of size 20mm bore including taking down old valve complete all specified and as directed by Engr-in-Charge.

Material and labour for brick masonry valve pit of size 90cms x 90cms x 90cms (internal dimensions of chamber) depth to be reckoned from the top of PCC foundation to top of MS cover as shown on drgs with MS sheet cover 3 mm thick including frame of angle iron 40mm x 40mm x 6mm with locking arrangement including painting two coats of black synthetic enamel paint over a coat of red oxide primer etc including brick work in cement mortar 1:6 , 15mm thick plastering in cement mortar 1:4 (Internal and external) and necessary excavation and earth work in any type of soil returning, filling in disposal of surplus spoil to a distance not exc. 50 metres, 15cm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate for base all as specified and shown in TD drawing. Note:- Note :- Drg for wall pit can be seen in office of Engr-in-Charge.

Supply and fixing of CI fittings such as bends (any type, radius and angles), tapers any type, Tee pieces single branch ‘Y’ Junction , double branch, cross (all sockets and spigot) collars, caps and plugs upto 150mm bore pipe complete all as specified. Note :-(Run lead joints etc shall be measured and paid separately)

Material and labour for cutting of existing CI/GI pipe line of size 150mm/100mm dia bore (supply main) and making connection by inserting CI Tee/CI collar etc and connecting to new GI Pipe line 50mm dia complete all as specified and directed by Engineer-in-Charge. Note :- Run lead joint, excavation earth work, CI specials measured and paid for separately)

M&L for run lead joints 80mm bore of pipe complete all as specified and directed by Engineer-in-Charge

M&L for run lead joints 100mm bore of pipe complete all as specified and directed by Engineer-in-Charge

M&L for run lead joints 150mm bore of pipe complete all as specified and directed by Engineer-in-Charge

M&L for rubber gasket flanged joints joints including nut, bolts and washers 150mm bore of pipe complete all as specified.

M&L for rubber gasket flanged joint joints including nut, bolts and washers 100mm bore of pipe complete all as specified.

M&L for rubber gasket flanged joints joints including nut, bolts and washers 80mm bore of pipe complete all as specified.

Supply and fix in replacement of Non retrun Valve of following sizes complete :-

(a) 80mm bore

(b) 100 mm bore

(c) 150 mm bore

Dismantling of PVC tank 5000 to 10000 ltr capacity complete all as specified and as directed by Engr-in-charge.

M&L for PVC water tank 5000 Ltr capacity of superior quality having three layered with incoming, outgoing and over flow water connection provision upto 0.50 mtr from neeple etc complete including provision for inlet and outlet 40 mm dia tank neeples and float valve for over flow of 40 mm bore complete all as specified and directed by Engr-in-Charge. Make Sintex / Polycon or equivalent out of makes specified in list of makes.

M&L for PVC water tank 10000 Ltr capacity of superior quality having three layered with incoming, outgoing and over flow water connection provision upto 0.50 mtr from neeple etc complete including provision for inlet and outlet 40 mm dia tank neeples and float valve for over flow of 40 mm bore complete all as specified and directed by Engr-in-Charge. Make Sintex / Polycon or equivalent out of makes specified in list of makes.

M&L for PVC water tank 1000 Ltr capacity of superior quality having three layered with incoming, outgoing and over flow water connection provision upto 0.50 mtr from neeple etc complete including provision for inlet and outlet 25 mm dia tank neeples and float valve for over flow of 25 mm bore complete all as specified and directed by Engr-in-Charge. Make Sintex / Polycon or equivalent out of makes specified in list of makes.

M&L for cleaning of RCCunder ground Sump 50000 gallon capacity by removing all deposite materials like sand etc, washing of side walls, scraping with iron brush to remove all type of scales, filling up cavaties by cement motar 1:1, washing of inner dome walls with bleaching powder before painting with lime, 2 coats complete all as speciied and directed by Engr-in-Charge.

M&L for cleaning of RCC SWT tank by dewatering removing all deposite materials like sand silt,sludge, impuritie etc, washing of side walls, scraping with iron brush to remove all type of scales, filling up cavaties by cement motar 1:1 and washing walls with lime powder complete all as speciied and directed by Engr-in-Charge.

Note:- The amount of Rs 1,68,940/- against Schedule of Credit on Page No 125 shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance

Ridhi engineers and builders

PRASAD ELECTRICALS

Saini Enterprises

Satish Kumar Gupta

airstack india

M/s GANJOO AND CO