Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.0 LAccepted-AOC N A | NA | NA | 121004 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹29.3 L+₹76,095 (2.67%)Rejected-Finance | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹30.1 L+₹1.6 L (5.76%)Rejected-Finance | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹31.7 L+₹3.2 L (11.3%)Rejected-Finance N A | NA | NA | 121004 | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹32.0 L+₹3.5 L (12.3%)Rejected-Finance BLDG 9 FLAT 130 MIRA CO OP HOUSING SOCIETY LTD SALISBURY PARK GULTEKDI PUNE 411037 | PUNE | PUNE | MAHARASHTRA | 411037 | L5 | Rejected-Finance Not Lowest |
| Sl No | Description | Qty | Unit | J P ASSOCIATES L1 | Vijay Construction and Company L5 | SAGAR ENTERPRISES L6 | THE SAIRAM CONSTRUCTIONS L7 | M/s Akshay Contruction L2 | M/S - R K CONSTRUCTIONS L9 | K.S.JITE AND SONS L8 | Parhar Enterprise L3 | N B ENTERPRISES L4 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Dismantling asbestos cement (plain, corrugated, semi corrugated etc.) sheets in roof coverings complete all as specified and as directed | 1,550 | Sqm | 7 ₹10,850 Lowest | 20 ₹31,000 | 10 ₹15,500 | 20 ₹31,000 | 10 ₹15,500 | 20 ₹31,000 | 10 ₹15,500 | 25 ₹38,750 | 20 ₹31,000 |
| 2.00 | Dismantling structural steel work including doors, gates, framed truss etc. complete all as specified and as directed | 5 | Qtl | 160 ₹800 | 400 ₹2,000 | 200 ₹1,000 | 1,000 ₹5,000 | 100 ₹500 | 25 ₹125 Lowest | 500 ₹2,500 | 50 ₹250 | 1,500 ₹7,500 |
| 3.00 | Demolition of cement concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level) and rubbish off the premises complete all as specified and as directed | 155 | Cum | 80 ₹12,400 | 400 ₹62,000 | 250 ₹38,750 | 300 ₹46,500 | 50 ₹7,750 Lowest | 250 ₹38,750 | 100 ₹15,500 | 180 ₹27,900 | 200 ₹31,000 |
| 4.00 | Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating (AZ-150) GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws with two corrugation side lap complete all as specified and as directed. | 1,550 | Sqm | 610 ₹9,45,500 | 620 ₹9,61,000 | 720 ₹11,16,000 | 710 ₹11,00,500 | 680 ₹10,54,000 | 700 ₹10,85,000 | 750 ₹11,62,500 | 570 ₹8,83,500 Lowest | 700 ₹10,85,000 |
| 5.00 | Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating (AZ-150) GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws with side lap as in ridge complete all as specified and as directed. | 50 | Sqm | 620 ₹31,000 | 550 ₹27,500 Lowest | 720 ₹36,000 | 590 ₹29,500 | 650 ₹32,500 | 700 ₹35,000 | 750 ₹37,500 | 550 ₹27,500 Lowest | 725 ₹36,250 |
| 6.00 | S&F mild steel rolled section as in main cross beams purlins, rafters and running rails fixed independently with angle iron cleats or connecting pieces conforming to Gde Fe-410-W, Gde E-250, quality A complete all as specified and directed. | 1,000 | Kg | 90 ₹90,000 | 90 ₹90,000 | 92 ₹92,000 | 106 ₹1,06,000 | 78 ₹78,000 Lowest | 100 ₹1,00,000 | 85 ₹85,000 | 108 ₹1,08,000 | 125 ₹1,25,000 |
| 7.00 | M&L for preparation of new steel surfaces of any description over 10cm girth or width not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer. | 60 | Sqm | 65 ₹3,900 | 75 ₹4,500 | 50 ₹3,000 | 48 ₹2,880 | 65 ₹3,900 | 50 ₹3,000 | 40 ₹2,400 Lowest | 50 ₹3,000 | 100 ₹6,000 |
| 8.00 | Taking down cement plaster on brick/ stone walling including raking out joints, hacking for key, scrubbing down painted surface with wire brush and cleaning the surface with water etc complete all as specified and as directed | 700 | Sqm | 15 ₹10,500 | 30 ₹21,000 | 20 ₹14,000 | 20 ₹14,000 | 10.1 ₹7,070 | 25 ₹17,500 | 5 ₹3,500 Lowest | 15 ₹10,500 | 15 ₹10,500 |
| 9.00 | M&L Brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 etc including demolition of brickwork built in cement mortar and rubbish off the premises complete all as specified and directed. | 10 | Cum | 4,800 ₹48,000 | 5,500 ₹55,000 | 5,500 ₹55,000 | 4,900 ₹49,000 | 4,100 ₹41,000 Lowest | 5,300 ₹53,000 | 4,500 ₹45,000 | 5,200 ₹52,000 | 7,000 ₹70,000 |
| 10.00 | Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement all as specified and as directed. | 300 | Sqm | 210 ₹63,000 | 250 ₹75,000 | 200 ₹60,000 Lowest | 230 ₹69,000 | 200 ₹60,000 Lowest | 280 ₹84,000 | 200 ₹60,000 Lowest | 210 ₹63,000 | 250 ₹75,000 |
Tender Value
₹48.4 L
EMD Value
₹96,860
Closing Date
19 Dec 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH PUNE
Garrison Engineers Office (North)General Cariappa Marg, Pune-01
GE (N) P/TOKEN- 74 OF 2025-2026 SPL REPAIRS TO BUILDINGS NOS T-3,T-4,T-5,T-7 AND 5 OF BSO YARD IN AOR OF AGE B/R (CENTRAL) UNDER GE (NORTH) PUNE
2025_MES_741892_1
GE (N) P/TOKEN- 74 OF 2025-2026
Open Tender
Civil Works
Item Rate
270 days
GE NORTH PUNE
Refer tender documents.
8 documents required · 8 mandatory
₹500
GE NORTH PUNE
₹96,860
Yes
23 Feb 2026
28 Nov 2025
22 Dec 2025
28 Nov 2025
19 Dec 2025
12 Dec 2025
29 Nov 2025 - 5 Dec 2025
Amount
Dismantling asbestos cement (plain, corrugated, semi corrugated etc.) sheets in roof coverings complete all as specified and as directed
Dismantling structural steel work including doors, gates, framed truss etc. complete all as specified and as directed
Demolition of cement concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level) and rubbish off the premises complete all as specified and as directed
Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating (AZ-150) GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws with two corrugation side lap complete all as specified and as directed.
Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating (AZ-150) GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws with side lap as in ridge complete all as specified and as directed.
S&F mild steel rolled section as in main cross beams purlins, rafters and running rails fixed independently with angle iron cleats or connecting pieces conforming to Gde Fe-410-W, Gde E-250, quality A complete all as specified and directed.
M&L for preparation of new steel surfaces of any description over 10cm girth or width not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer.
Taking down cement plaster on brick/ stone walling including raking out joints, hacking for key, scrubbing down painted surface with wire brush and cleaning the surface with water etc complete all as specified and as directed
M&L Brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 etc including demolition of brickwork built in cement mortar and rubbish off the premises complete all as specified and directed.
Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement all as specified and as directed.
Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.
M&L for preparation of newly plastered surfaces and applying two coats of weather proof exterior emulsion paint ('APEX' brand of Asian or equivalent brand of Berger/Shalimar) over one coat of primer to wall complete all as specified and as directed by Engineer-in-charge.
Material and labour for preparation of New plastered wall surface and applying two coats of acrylic distemper over a coat of alakli resistant primer over a thin layer of wall care cementeous putty complete all as specified and as directed.
Taking down shutters of any description, area exc.1 sqm and not exc. 2 sqm each complete all as specified and as directed
Supply and fix 30mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 35X6mm all around the shutters complete all as specified and as directed
Dismantling of stone slabs,cudappah, of any description or thickness in floor/fixed to walls, apron etc laid bedded and pointed in cement mortar complete all as specified.
Material and labour for 75mm thick PCC (1:4:8) type D2 (using 40mm graded broken stone aggregate) as in sub base complete all as specified and as directed.
Material and labour 75mm thick PCC (1:3:6) type C2 (using 40mm graded broken stone aggregate) as in plinth protection finishing the surface even and smooth without using extra cement including demolition complete all as specified and as directed.
M&L for Machine cut kota stone 20-25mm thick over cement screed bed 20mm thick in CM (1:4) laid and jointed with grey cement slurry and pointed with grey cement and pigment to match the shade of the slab including rubbing and polishing complete (mirror polish) as in flooring/treads /slabs complete all as specified and as directed.
M&L for Machine cut kota stone 20-25mm thick over 10mm thick backing coat in CM (1:4) laid and jointed with grey cement slurry and pointed with grey cement and pigment to match the shade of the slab including rubbing and polishing complete (mirror polish) as in riser of steps/Skirting/dado and pillar complete all as specified and as directed.
Supply and fix 300mm long aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, ISI marked, complete all as specified and as directed.
Supply and fix 200mm long aluminium anodised, barrel tower bolts of extruded section, complete all as specified and as directed.
Supply and fix butt hinges, 100mm size, mild steel cold rolled, medium weight complete all as specified and as directed.
Supply and fix 150mm size extruded aluminium alloy handles fabricated type anodised complete all as specified and as directed.
Material and labour for preparation of new untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
M&L for complete removal of existing treatment on walls using steel wire brush, sanding machine, rubbing ivory papers etc and washing , rubbing down and stopping of distempered and painted surfaces, preparing surfaces plastered or unplastered surfaces ready to receive new finish complete all as specified and directed.
M&L for preparation of old painted steel surfaces of any description over 10cm girth or width and applying one coat of synthetic enamel paint.
M&L for applying wall care putty 1 to 1.5 mm thick on walls surfaces.
M&L for applying one coat of alkali resistant priming paint on wall.
M&L for two coats of acrylic distemper of approved tint on wall surfaces
Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.
M/s Akshay Contruction (BID ID -3502129)
Parhar Enterprise (BID ID -3508274)
N B ENTERPRISES (BID ID -3504413)
Vijay Construction and Company (BID ID -3501891)
SAGAR ENTERPRISES (BID ID -3501955)
THE SAIRAM CONSTRUCTIONS (BID ID -3502125)
K.S.JITE AND SONS (BID ID -3506119)
M/S - R K CONSTRUCTIONS (BID ID -3502628)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.30 MB
tenderdocuments74.pdf
Tender Documents • 1.37 MB
BOQ_830756.xls
BOQ • 10.91 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .