Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
Closing Date
24 May 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Mission & Combat System R & D Centre
HINDUSTAN AERONAUTICS LIMITED Mission & Combat System R & D Centre
REPLICA COCKPIT DISPLAYS FOR SIMULATOR
6960
MC/S461/2129/24/1
Works
Design Complex -MCSRDC
₹0
Exempted
24 May 2024
18 Apr 2024
18 Apr 2024
24 May 2024
Mission & Combat System Research & Design Centre HINDUSTAN AERONAUTICS LIMITED Marathahalli Post Bangalore - 560 037 INDIA
Commercial Bid (PRICE FORMAT)
Tender Ref. No.: MC/S461/2129/24/1
Type of Bid: Two Bid System
Name of Work: REPLICA COCKPIT DISPLAYS FOR COCKPIT PROCEDURE TRAINERs (CPTs) & FIXED BASE FULL MISSION SIMULATOR (FBFMS) OF TRAINER AIRCRAFT
Name of the Vendor/Firm
Quotation Ref. No.:
Sl.No. Part Description Qty (UOM) HSN/SAC Code Currency Basic Cost Sub Total (Basic Unit Cost X Qty.)
1 Display Unit-1 LCD Based Display Unit-1 with interfaces along with Mating connectors and documentation 6 Set
2 Spares-Display Unit-1 LCD Panel 3 Set
3 Spares-Ethernet IO Module for Display Unit-1 3 Set
1 Display Unit-2 LCD Based Display Unit-1 with interfaces along with Mating connectors and documentation 6 Set
2 Spares-Display Unit-2 LCD Panel 3 Set
3 Spares-Ethernet IO Module for Display Unit-2 3 Set
1 Display Unit-3 LCD Based Display Unit-3 with interfaces along with Mating connectors and documentation 6 Set
2 Spares-Display Unit-3 LCD Panel 3 Set
3 Spares-Ethernet IO Module for Display Unit-3 3 Set
1 Display Unit-4 LCD Based Touch Screen Display Unit-4 with interfaces along with Mating connectors and documentation 6 Set
2 Spares-Display Unit-4 LCD Touch Screen Panel 3 Set
3 Spares-Ethernet IO Module for Display Unit-4 3 Set
Total Basic Cost
Note:Tender will be evaluated Groupwise basis as below. 1.Display Unit-1(A-1 to 3) as Group-1 2.Display Unit-2(B-1 to 3) as Group-2 3.Display Unit-3(C-1 to 3) as Group-3 4.Display Unit-4(D-1 to 3) as Group-4
Mention details of taxes and other charges in the table below
Please indicate applicable taxes Type of Tax Currency Applicable on Tax Value
Basic Custom Duty (if any)
IGST on Import (If any)
OTHER INFORMATION, IF ANY
Mission & Combat System Research & Design Centre HINDUSTAN AERONAUTICS LIMITED Marathahalli Post Bangalore - 560 037 INDIA
Technical Terms and Conditions of Tender - Annexure - 1
Tender Ref. No. MC/S461/2129/24/1
Name of Work: REPLICA COCKPIT DISPLAYS FOR COCKPIT PROCEDURE TRAINERs (CPTs) & FIXED BASE FULL MISSION SIMULATOR (FBFMS) OF TRAINER AIRCRAFT
Name of the Vendor/ Firm:
Quotation Ref. No.:
PLEASE INDICATE YOUR RESPONSE/ COMPLAINCE/ACCEPTANCE TO THE FOLLOWING TERMS (MANDATORY). INDICATE THE TECHNICAL SPECIFICATION/RANGE AGAINST HAL TECHNICAL REUIREMENTS WHEREVER NECESSARY
Sl. No. HAL Scope of Work Vendor's Compliance (Complied or not complied)
General Requirement
1.0 Vendor Qualification Criteria (i) Vendor should have designed, supplied and obtained customer acceptance for at least 02 numbers of LCD based displays along with bezel consisting of COTS displays, switches, controls and interface electronics for simulator or test rigs or aircraft LRUs. Vendor should have a valid QMS certificate viz. ISO 9001 or AS 9100D for established quality standards of their company. (ii) To support the above claim vendor shall provide documentary evidences viz. Purchase Order or Certificate of Completion or other equivalent documents along with the bid. (iii) Vendor shall confirm their company had been in operation for at least last three financial years ending 31 March 2023 and company has not suffered financial loss for more than one year during these three financial years as per the annual report of the relevant period and the net worth of the company is positive. To support the claim, vendor shall submit the company annual report (audited balance sheet, profit & loss statement) for last three financial years, duly authenticated by a Charted Accountant / Cost Accountant in India. (iv) The above requirements are mandatory and offers not meeting these requirements shall be summarily rejected.
2.0 Other Requirements 2.1. Pre-Dispatch Inspection and Delivery Location (i). Vendor shall provide the Pre-dispatch inspection test procedure for testing of Replica Cockpit Display units. The Pre-dispatch inspection test procedure shall cover the functional demonstration LCD panel, push buttons, potentiometers and other functional elements of Replica Cockpit Display units. The test procedure shall be mutually agreed by HAL and Vendor. (ii). Arrangement of all the hardware & software testing tools required for Pre-dispatch inspection at vendor’s premises is the responsibility of the vendor. (iii). After satisfactory functional demonstration during pre-dispatch inspection, vendor shall deliver the Replica Cockpit Display units at HAL, Bengaluru as per the delivery schedule mentioned at Para 4.0 of this document.
2.2. Integration Testing and Acceptance 2.2.1. Integration Testing (i). After receipt of items at HAL, Bengaluru, HAL will install the Replica Cockpit Display units for integration with Image Generation (IG) computers and Simulation Host computer. (ii). Vendor shall provide acceptance test procedure for integration testing of Replica Cockpit Display units at HAL. The test procedure shall be mutually agreed by HAL and Vendor. Vendor shall ensure the performance of Replica Control Panels as per the technical requirements mentioned in document no. MCSRDC/SIM-HTT40/TR/RCD/01/00 dated 30 Jan 2024. (iii). Vendor is required to take-up necessary modifications in Replica Cockpit Display units to close all the observations (related to vendor’s scope of work) noticed during the integration testing. Additionally, Vendor to take-up 10% of design changes based on the design modification of actual displays without additional cost.
2.2.2. Acceptance Acceptance of the Replica Cockpit Display units shall be based on satisfactory completion of integration testing.
3.0 List of Deliverables Following are the list of deliverables of Replica Cockpit Display units:
3.1. Display Unit-1 Table-1: List of Deliverables - Display Unit-1
Sl. No. Items Qty
1 LCD Based Display Unit-1 with interfaces 06 No
2 Mating connectors for Display Unit-1 06 No.
3 Documentation (Refer Para 6.0) 02 Sets
4 Spares As per Para 12.0
3.2. Display Unit-2 Table-2: List of Deliverables - Display Unit-2
Sl. No. Items Qty
1 LCD Based Display Unit-2 with interfaces 06 No
2 Mating connectors for Display Unit-2 06 No.
3 Documentation (Refer Para 6.0) 02 Sets
4 Spares As per Para 12.0
3.2. Display Unit-3 Table-2: List of Deliverables - Display Unit-3
Sl. No. Items Qty
1 LCD Based Display Unit-3 with interfaces 06 No
2 Mating connectors for Display Unit-3 06 No.
3 Documentation (Refer Para 6.0) 02 Sets
4 Spares As per Para 12.0
3.4. Display Unit-4 Table-4: List of Deliverables - Display Unit-4
Sl. No. Items Qty
1 LCD Based Touch Screen Display Unit-4 with interfaces 06 No
2 Mating connectors for Display Unit-4 06 No.
3 Documentation (Refer Para 6.0) 02 Sets
4 Spares As per Para 12.0
4.0 Delivery Schedule The delivery schedule of Replica Cockpit Display units is given below: Table-5: Delivery Schedule
Sl. No. Activity Time line (in Months)
1 Delivery of following Replica Cockpit Display units (1st Set) at HAL, Bengaluru: (i). Display Unit-1: 02 Nos (ii). Display Unit-2: 02 Nos (iii). Display Unit-3: 02 Nos (iv). Display Unit-4: 02 Nos T0 + 5
2 Delivery of following Replica Cockpit Display units (2nd Set) at HAL, Bengaluru: (i). Display Unit-1: 02 Nos (ii). Display Unit-2: 02 Nos (iii). Display Unit-3: 02 Nos (iv). Display Unit-4: 02 Nos T0 + 12
3 Delivery of following Replica Cockpit Display units (3rd Set) at HAL, Bengaluru along with spares as indicated in para 12.0: (i). Display Unit-1: 02 Nos (ii). Display Unit-2: 02 Nos (iii). Display Unit-3: 02 Nos (iv). Display Unit-4: 02 Nos T0 + 21
Note 1: T0 : Date of placement of Purchase Order Note 2: The items should be supplied as per the delivery schedule indicated above. As time is the essence of this programme for integration of Replica Cockpit Display units on simulator, deviations from the schedules will not be acceptable to HAL and may render the bid submitted by the vendor liable to be rejected.
5.0 Warranty (i). The Replica Cockpit Displays and its associated accessories supplied by the vendor shall carry onsite warranty for 24 months from the date of acceptance by HAL as per Para No. 2.2.2. (ii). The vendor shall warrant that the items supplied by the vendor shall conform to the technical requirements of Replica Cockpit Display units for CPT and FBFMS of trainer aircraft mentioned in document no. MCSRDC/SIM-HTT40/TR/RCD/01/00 dated 30 Jan 2024 shall perform according to the said technical requirements. Any repair or replacement or maintenance arising during warranty period to meet the technical requirements shall be done free of cost by the vendor. The Replica Cockpit Display units and associated accessories supplied shall be free from defects in materials & workmanship and fit for the intended purpose. (iii). Vendor shall either repair or replace the faulty item during warranty period at free of cost. Vendor shall put all the efforts to provide the warranty services on highest priority as & when defect is notified to the vendor.
6.0 Documentation Two color hard copies & one soft copy (DVD) of the following documents shall be supplied by the vendor along with each unit: (i). User Handbook / Operating manual. (ii). Technical specifications of Replica Cockpit Displays including interfaces and software, mechanical and electrical ICD, etc. (iii). Electrical drawings including pin details of interconnecting cables. (iv). Mechanical drawings of assembly and installation. (v). Maintenance manual covering installation procedure along with tools required for maintenance, troubleshooting and parts replacement. (vi). Endurance test report. (vii). Bill of Material (BOM). (viii). Mutually agreed Pre-dispatch inspection test procedures along with Acceptance Test Reports (ATR). (ix). Certification Of Compliance (COC), Datasheets and Serviceability tags. (x). Vendor documents supplied by the third party vendor, if any.
7.0 Product Support Vendor shall provide product support for a minimum period of 20 years with regard to necessary spares and services. In case of obsolescence of products / sub systems / components, the same has to be communicated to HAL in regular intervals for necessary action by HAL. Even after the said mandatory period, vendor would be bound to give at least two years notice to the HAL/end user prior to closing the production line so as to enable a Life Time Buy of all spares before closure of the said production line. All upgrades and modifications carried out on the equipment during its lifecycle must be intimated to HAL.
8.0 Sub-letting/Outsourcing: Vendor shall not out-source/sub-let the entire design and supply order.
9.0 Design Concurrence and Progress Review Meetings Vendor shall obtain the design concurrence from MCSRDC, HAL before fabrication of replica cockpit display units and shall participate in Progress Review meetings that would be planned for design and development of Replica Cockpit Display units.
10.0 Endurance The Replica Cockpit Display units and its associated accessories shall be capable of undertaking daily operation of 10hrs/day continuously. Endurance test of Equipment for 10 hours shall be carried out during integration testing.
11.0 Year of Production The equipment should be latest manufactured items at the time of delivery.
12.0 Spares Following spares shall be delivered by the vendor along 3rd set of Replica Cockpit Display units as part of delivery: Table-6: List of Spares
No. Item Description Qty
I. Spares for Display Unit-1
a. Display Unit-1 LCD Panel 03 No
b. Ethernet IO Module for Display Unit-1 03 No
II. Spares for Display Unit-2
a. Display Unit-2 LCD Panel 03 No
b. Ethernet IO Module for Display Unit-2 03 No
III. Spares for Display Unit-3
a. Display Unit-3 LCD Panel 03 No
b. Ethernet IO Module for Display Unit-3 03 No
IV. Spares for Display Unit-4
a. Display Unit-4 LCD Touch Screen Panel 03 No
b. Ethernet IO Module for Display Unit-4 03 No
It is mandatory to provide line item wise cost for each line item given in Table-6 in the commercial bid.
13.0 Government Regulations Vendor is required to confirm that there are no Government restrictions or limitations in the country of the supplier or countries from which subcomponents are being procured and / or for the export of any part of the system being supplied.
14.0 Obsolescence In case of obsolescence of any item / spare parts / assemblies, vendor shall provide alternate solution / equivalent item readily available in the market. The vendor shall continue to support the Replica Cockpit Display units for a minimum period of 20 years by making available spare parts and assemblies of Replica Cockpit Display units. Vendor shall notify HAL at least two years before end of life of any of the supplied item to enable a last time buy order/ a life time buy of all spares before end of life.
15.0 Repeat Order In the event of placement of purchase order, HAL reserves the right to place repeat order for Replica Cockpit Display units by any of its divisions within 12 months from the date of completion of the original order. The repeat order may be placed up to 100% of the value of the original order. The prices, terms and conditions of the repeat order shall be same as that of the original order.
16.0 Submission of Proposal Vendor shall provide the following documents/details along with the Technical bid. 1. Technical description and details of the proposed Replica Cockpit Display units. 2. Para wise compliance table with respect to technical requirements and general requirements of Replica Cockpit Display units along with relevant technical details or datasheets to support the compliance. 3. Response to each requirement shall contain adequate details in the technical proposal submitted by the vendor for compliance verification instead of merely stating “Complied”.
Technical Requirement
1. Introduction Mission and Combat System Research and Design Centre (MCSRDC), Hindustan Aeronautics Limited (HAL) is involved in Design and Development of two (02) numbers of Cockpit Procedure Trainers (CPTs) and one (01) number of Fixed Base Full Mission Simulator (FBFMS) for a trainer aircraft. The Cockpit of CPTs and FBFMS shall be equipped with Replica Cockpit Display Units.
2. Purpose The purpose of this document is to define the technical requirements for design, manufacture, supply, integration and testing of replica cockpit display units for CPTs and FBFMS of trainer aircraft.
3. Brief of Replica Cockpit Display Units Requirements Four types of Replica Display units (viz, Display Unit-1, Display Unit-2, Display Unit-3 and Display Unit-4) are required to be developed, manufactured and supplied for CPTs & FBFMS of a trainer aircraft.
3.1. Design Requirements for all the Replica Display units The design requirements for the four types of Replica Display units (viz, Display Unit-1, Display Unit-2, Display Unit-3 and Display Unit-4) to be catered are as follows, i. Vendor shall supply LCD based Replica Cockpit Display Units for installation in CPTs & FBFMS cockpits. The display units shall be physical and functional replica of actual trainer aircraft displays. ii. The replica display units shall be supplied as independent LRUs consisting of Industrial grade COTS items like LCD panel, bezel, switches, push buttons, knobs, etc of suitable size, to replicate the display of the actual equipments. iii. The LCD panel, LCD driving & power electronics shall be installed in a single form-fit replica enclosure. Push buttons and control knobs shall be replicated with force, touch screen, feel as on the actual unit. Bezel/ front facial of the replica cockpit display units shall be the exact replica of the trainer aircraft actual displays. iv. The symbols and other display parameters to be displayed on the replica cockpit display units will be developed by HAL and fed as a video input through Display Port (DP) interface. v. The enclosure for the Replica Display units shall be fabricated using Aluminium 6061, T6 material. The enclosure shall be finished with high grade paint in Matt black over one coat of primer. vi. The mounting hole dimensions and mounting design shall be form fit as per the original aircraft displays. vii. Vendor shall provide the 3D model of the design of the replica cockpit display units to MCSRDC before initiating fabrication. viii. The unit shall have protection against electrical power fluctuations and EMI/EMC. ix. Bill of Material (BOM) and component datasheet are to be provided and approved by HAL before commencement of manufacturing. x. Mechanical, Ethernet, Electrical, Video Interface Control Document to be worked out jointly during design phase. xi. All components to be industrial grade with high reliability. xii. The display units shall have software for sending push buttons, control knob status, touchscreen information, etc through ethernet bus and display received video.
3.2. Technical Requirements 3.2.1. Display Unit-1 of Trainer aircraft 3.2.1.1. The Display Unit-1of Trainer aircraft shall have LCD panel and the same shall be installed in the enclosure of dimensions as specified in Table-1. The representative Display Unit-1 is shown in Fig-1 below:
The technical requirements of LCD panel and other controls of Display Unit-1 of trainer aircraft are given in Table-1. Vendor shall supply the Display Unit-1 of trainer aircraft equipped with the following components/features:
No. Nomenclature Requirements
1.1. Display Type LCD Display
1.2. Back lighting LED
1.3. Active Viewing Area (i). 6.0 inches (152.4 mm) (H) × 8.0 inches (203.2 mm) (V) (ii). Allowable Tolerance: 0.2 inches (5.08mm) (H) 0.3 inches (7.62mm) (V)
1.4 Display Resolution 768(H) × 1024(V) pixels or better
1.5 Display Refresh rate 50 Hz or more
1.6 Display viewing angle (i). Horizontal: ± 55° (minimum) or better (ii). Vertical: +35° x cos(h), -5° x cos(h) or better where h is the instantaneous horizontal viewing angle
1.7 Display Brightness The minimum brightness shall be 300 Cd/M2 or better
1.8 Display Contrast Ratio 400:1 or better
2 Control Knobs ( 4 Nos)
2.1 Operation Rotary knob with continuous rotation with steps for each rotation including momentary push switch. Positioned at 4 corners of the Display unit.
2.2 Quantity 4 Nos
2.3 Rotation direction Both clockwise and anti-clockwise
2.4 Rotary Control Knob dimensions The shape and size of the rotary knob shall be as per HAL supplied 3D model.
2.5 Rotary Control Knob Characteristics (i). Color of Rotary Control Knob: Black (ii). Status of operation of rotation and momentary push of the control knob shall be provided on Ethernet interface. (iii). The details of increment steps of each control knob #1, control knob #2, control knob #3 and control knob #4 shall be provided to the vendor by HAL after placement of P.O.
3 Option Selection Switch (OSS) Push Buttons
3.1 Operation Momentary push
3.2 Quantity 28 Nos.- 6 each in top &bottom bezel, 8 each in left and right bezel.
3.3 Mechanical Dimensions The shape, size and pitch distance between each OSS shall be as per HAL supplied 3D model.
3.4 OSS Pushbutton Characteristics (i). Color of Pushbuttons: Black (ii). Pushbutton switches shall be momentary action switches, having tactile snap action feedback. (iii). Vendor to measure the force to operate the OSS Push buttons during design phase and shall install a switch meeting the force feel requirements. (iv). Bottom mid2nos of OSS push button are used for brightness control. The brightness keys use both discrete steps and continuous adjustment (press and hold). Vendor to visit HAL during design phase for further details and exact intensity of brightness variation. (v). Status of operation of OSS push buttons shall be provided on Ethernet interface.
4 Illuminated Marking
4.1 Illuminated marking Characteristics (i). All the push buttons and bezel shall have markings and/or legends. Details of font shall be provided during design phase. The markings and/or legends on the push buttons and bezel shall be illuminated. (ii). Color of marking in Unit Power OFF condition: White translucent. (iii). Color of marking in Unit Power ON condition: Green (iv). Vendor shall vary the intensity of the illumination based on the bezel illumination control knob setting in the simulator. The bezel illumination voltage details will be provided to the vendor by HAL after placement of P.O.
5 Photocell (Dummy)
5.1 Operation The marking shall be carried out as shown in Fig-1. The shape and size of the dummy photocell marking shall be as per HAL supplied 3D model.
6 Day/Night Brightness
6.1 Brightness Characteristics Vendor shall vary the brightness of the display panel based on the Day/Night selection switch setting in the simulator. Vendor to visit HAL during design phase for further details and exact intensity of brightness variation based on Day/Night selection switch.
7.1 Finger Guide Characteristics (i). The Display Unit-1 of trainer aircraft shall have finger guide on the bezel which shall enable to locate bezel keys in all ambient conditions as shown in Fig-1. (ii). Color of Finger Guide: Black
7.2 Quantity 24 Nos. - 5 each in top & bottom bezel, 7 each in left and right bezel.
7.3 Mechanical Dimensions The shape, size and pitch distance between each Finger guide shall be as per HAL supplied 3D model.
8.1 Bezel Characteristics (i). Bezels shall be in Matt Black color (ii). Bezel dimensions shall be as per HAL supplied 3D model.
9 Interfaces (Refer Fig.2)
9.1 Video Input (i). Video Interface for the Display Unit-1 of trainer aircraft shall be Display Port (DP). (ii). HAL will generate the display graphics and the same will be fed to Display Unit-1 of trainer aircraft by using Display Port.
9.2 Input Power Supply (i). The Display Unit-1 of trainer aircraft shall work with 28V DC power supply. (ii). HAL will provide 28V DC power supply in the cockpit. Vendor shall convert 28V DC to the input power supply required by Display Unit-1 of trainer aircraft. (iii). The Display Unit-1 shall have protection against electrical power fluctuations and EMI/EMC.
9.3 Electrical Grounding Requirements The equipment shall be grounded to prevent ground loops & ground returns common to signal & power circuits. Vendor shall provide effective shielding for signal circuits for protecting the personnel from electrical hazards.
9.4 Electrical Bonding Requirements Adequate electrical bonding is to be provided for Display Unit-1 of trainer aircraft. Chassis bonding should be through pin(s) on the connector considering that the Display Unit-1 of trainer aircraft would be installed on a metallic structure.
9.5 Interface Connectors for Display, Data and Unit Power Following interface connectors shall be provided on the rear chassis of the unit: (i). Display: Display Port connector with locking mechanism. (ii). Ethernet: Circular RJ-45 connector with locking mechanism. (iii). Unit Power and intensity control: Industrial grade circular connector with locking mechanism. (iv). Vendor shall supply mating connectors for Unit Power & intensity control circular connector, Display Port and Ethernet connectors.
10 Physical Parameters
10.1 Mechanical Dimensions 266.5(H) × 203(W) × 155.5(D) in mm Detailed drawings / 3 D model of the actual aircraft unit shall be provided to the vendor by HAL after placement of P. O.
10.2 External Surface Finish Matt Black Finish over one coat of primer on all external surfaces.
10.3 Displays Enclosure/ casing Material Aluminium Alloy 6061, T6 - Commercial Grade.
10.4 Mechanical Installation Unit shall be mountable on the Main Instrument Panel using mounting screws.
10.5 Identification Label of Unit The unit shall have the clear & visible identification label fastened/riveted to the chassis firmly at the rear panel.
10.6 Unit Weight The Display Unit-1 of trainer aircraft weight shall not exceed 7Kg.
10.7 Packaging The unit shall be packed inside the carton box along with suitable shock absorbing foam to enable long distance transportation by road.
11.1 Mechanical, Ethernet, Electrical, Video Interface Control Document to be worked out jointly during design phase.
11.2 All components to be industrial grade with high reliability.
3.2.1.2. Spare LCD panels with make, model and Ethernet IO Modules for Display Unit-1 meeting the requirements mentioned in the above Table-1 for Display Unit-1 is to be provided.
3.2.2. Display Unit-2 of Trainer aircraft 3.2.2.1. The Display Unit-2 of trainer aircraft shall have an LCD panel and the same shall be installed in the enclosure of dimensions as specified in Table-2. The representative Display Unit-2 of trainer aircraft is shown in Fig-3 below.
The technical requirements of LCD panel and other controls of Display Unit-2 of trainer aircraft are given in Table-2. Vendor shall supply the Display Unit-2 of trainer aircraft equipped with the following components/features:
Table-2: Technical requirements of Display Unit-2 of trainer aircraft
No. Nomenclature Requirement
1.1 Display Type LCD
1.2 Back lighting LED
1.3 Active Viewing Area (i). 5 inches (127 mm) (H) x 7 inches (178 mm) (V) (ii). Allowable Tolerance: ± 2mm
1.4 Display Resolution 600 (H) × 800 (V) pixels or better
1.5 Display Refresh rate 50 Hz or more
1.6 Display viewing angle (i). Horizontal: ± 30° (minimum) (ii). Vertical: ± 45°(minimum)
1.7 Display Brightness The minimum brightness shall be 300 Cd/M2 or better
1.8 Display Contrast Ratio 400:1 or better
2 Option Selection Switch (OSS) Push Buttons
2.1 Operation Momentary push
2.2 Quantity 20 Nos (16 Nos– Multifunction buttons; 4 Nos of the bezel multifunction buttons as two dual switch rocker switches).
2.3 Mechanical Dimensions The shape, size and pitch distance between each OSS shall be as per HAL supplied 3D model.
2.4 OSS Pushbutton Characteristics (i). Color of Pushbuttons: Black (ii). Pushbutton switch shall be momentary action switches, having tactile snap action feedback. (iii). Status of operation of OSS push buttons shall be provided on Ethernet interface. (iv). The vendor to measure the force to operate the OSS Push buttons during design phase and shall install a switch meeting the force feel requirements.
3 Illuminated Marking
3.1 Illuminated marking Characteristics (i). All the push buttons and bezel shall have markings and/or legends. Details of font shall be provided during design phase. The markings and legends on the push buttons and bezel shall be illuminated. (ii). Color of marking in Unit Power OFF condition: White translucent. (iii). Color of marking in Unit Power ON condition: Green (iv). Vendor shall vary the intensity of the illumination based on the bezel illumination control knob setting in the simulator. The bezel dimming voltage details will be provided to the vendor by HAL after placement of P.O.
4.1 Bezel Characteristics (i). Bezels shall be in Matt Black color. (ii). Bezel dimensions shall be as per HAL supplied 3D model. (iii). Bezel shall have a single unlit white line associated with each OSS push button.
5 Photocell (Dummy)
5.1 Operation The marking shall be carried out as shown in Fig-3. The shape and size of the dummy photocell marking shall be as per HAL supplied 3D model.
6 Day/Night Brightness
6.1 Brightness Characteristics Vendor shall vary the brightness of the display panel based on the Day/Night mode switch setting in the simulator. Vendor to visit HAL during design phase for further details and exact intensity of brightness variation based on Day/Night mode switch.
7.1 Finger Guide Characteristics (i). The Display Unit-2 of trainer aircraft shall have finger guide on the bezel which shall enable to locate bezel keys in all ambient conditions as shown in Fig-3. (ii). Color of Finger Guide: Black
7.2 Quantity 18 Nos. - 2 each in top & bottom bezel, 7 each in left and right bezel.
7.3 Mechanical Dimensions The shape, size and pitch distance between each Finger guide shall be as per HAL supplied 3D model.
8 Interfaces (Refer Fig.4)
8.1 Video Input (i). Video Interface for the Display Unit-2 of trainer aircraft shall be Display Port. (ii). HAL will generate the display graphics and the same will be fed to Display Unit-2 of trainer aircraft by using Display Port.
8.2 Input Power Supply (i). The Display Unit-2 of trainer aircraft shall work with 28V DC power supply. (ii). HAL will provide 28V DC power supply in the cockpit. Vendor shall convert 28V DC to the input power supply required by Display Unit-2 of trainer aircraft. (iii). The Display Unit-2 shall have protection against electrical power fluctuations and EMI/EMC.
8.3 Electrical Grounding Requirements The equipment shall be grounded to prevent ground loops & ground returns common to signal & power circuits. Vendor shall provide effective shielding for signal circuits for protecting the personnel from electrical hazards.
8.4 Electrical Bonding Requirements Adequate electrical bonding is to be provided for Display Unit-2 of trainer aircraft. Chassis bonding should be through pin(s) on the connector considering that the Display Unit-2 of trainer aircraft would be installed on a metallic structure.
8.5 Interface Connectors for Display, Data and Unit Power Following interface connectors shall be provided on the rear chassis of the unit: (i). Display: Display Port connector with locking mechanism. (ii). Ethernet: Circular RJ-45 connector with locking mechanism. (iii). Unit Power and intensity control: Industrial grade circular connector with locking mechanism. (iv). Vendor shall supply mating connectors for Unit Power & intensity control circular connector and Display Port and Ethernet connectors.
9 Physical Parameters
9.1 Mechanical Dimensions 218 (H) × 172 (W) × 115 (D) in mm Detailed drawings / 3D model of the actual aircraft unit shall be provided to the vendor by HAL after placement of P. O.
9.2 External Surface Finish Matt Black Finish over one coat of primer on all external surfaces.
9.3 Displays Enclosure/ casing Material Aluminium Alloy 6061, T6 - Commercial Grade.
9.4 Mechanical Installation Unit shall be mountable on the Main Instrument Panel using mounting screws.
9.5 Identification Label of Unit The unit shall have the identification label fastened/ riveted to the chassis firmly at a place easily accessible and better visibility.
9.6 Unit Weight The weight shall not exceed 3.4 Kg.
9.7 Packaging The unit shall be packed inside the carton box along with suitable shock absorbing foam to enable long distance transportation by road.
10.1 Mechanical, Ethernet, Electrical, Video Interface Control Document to be worked out jointly during design phase.
10.2 All components to be industrial grade with high reliability.
3.2.2.2. Spare LCD panels with make, model and Ethernet IO Modules for Display Unit-2 meeting the requirements mentioned in the above Table-2 for Display Unit-2 is to be provided.
3.2.3. Display Unit-3 of Trainer aircraft 3.2.3.1. The Display Unit-3 of trainer aircraft shall have an LCD panel and the same shall be installed in the enclosure of dimensions as specified in Table-3. The representative Display Unit-3 of trainer aircraft is shown in figure below. The technical requirements of LCD panel and other controls of Display Unit-3 of trainer aircraft are given in Table-3. Vendor shall supply the Display Unit-3 of trainer aircraft equipped with the following components/features:
Table-3: Technical requirements of Display Unit-3 of trainer aircraft
No. Nomenclature Requirement
1.1 Display Type LCD Display
1.2 Back lighting LED
1.3 Active Viewing Area (i). 2.2 inches (55.88 mm) (H) × 2.2 inches (55.88 mm) (V) (ii). Allowable Tolerance: ± 2mm
.1.4 Display Resolution 300 (H) × 300 (V) pixels or better
1.5 Display Refresh rate 50 Hz or more
1.6 Display viewing angle (i). Horizontal: >±45° i.e. ± 45° (minimum) (ii). Vertical: -10° down, +30° up (minimum)
1.7 Display Brightness The minimum brightness shall be 300 Cd/M2 or better
1.8 Display Contrast Ratio 400:1 or better
2 Rotary/Push Knob (SET)
2.1 Rotary/Push Knob Operation Potentiometer should have continuous rotation with steps for each rotation including momentary push switch.
2.2 Quantity 1 No
2.3 Rotation direction Both clockwise and anti-clockwise
2.4 Switch Characteristics (i). Color of Rotary/Push Knob: Black. (ii). Color of legend on Rotary/Push Knob: White. (iii). Status of Rotary/Push knob operation of rotation and momentary push shall be provided on Ethernet interface. (iv). The details of increment steps of Rotary/Push knob shall be provided to the vendor by HAL after placement of P.O.
2.5 Mechanical Dimensions The shape and size of the Rotary/Push knob shall be as per HAL supplied 3D model.
3 Option Selection Switch (OSS) Push Buttons – NAV &ALN
3.1 Operation Momentary push
3.2 Quantity 2 Nos.in the bottom bezel
3.3 Mechanical Dimensions The shape, size and pitch distance between each OSS shall be as per HAL supplied 3D model.
3.4 OSS Pushbutton Characteristics (i). Color of Pushbuttons: Black (ii). Pushbutton switches shall be momentary action switches, having tactile snap action feedback. (iii). Vendor to measure the force to operate the OSS Push buttons during design phase and shall install a switch meeting the force feel requirements. (iv). Status of operation of OSS push buttons shall be provided on Ethernet interface.
4 Illuminated Marking
4.1 Illuminated marking Characteristics (i). All the push buttons shall have markings or legends. Details of font shall be provided during design phase. The markings and/or legends on the push buttons and bezel shall be illuminated. (ii). Color of marking in Unit Power OFF condition: White translucent. (iii). Color of marking in Unit Power ON condition: Green (iv). Vendor shall vary the intensity of the illumination based on the illumination control knob setting in the simulator. The bezel illumination voltage details will be provided to the vendor by HAL after placement of P.O.
5.1 Bezel Characteristics (i). Bezels shall be in Matt Black color (ii). Bezel dimensions shall be as per HAL supplied 3D model.
6 Photocell (Dummy)
6.1 Operation The marking shall be carried out as shown in Fig-5. The shape and size of the dummy photocell marking shall be as per HAL supplied 3D model.
7 Day/Night Brightness
7.1 Brightness Characteristics Vendor shall vary the brightness of the display panel based on the Day/Night selection switch setting in the simulator. Vendor to visit HAL during design phase for further details and exact intensity of brightness variation based on Day/Night selection switch.
8.1 Finger Guide Characteristics (i). The Display Unit-3 of trainer aircraft shall have finger guide on the bezel which shall enable to locate bezel keys in all ambient conditions as shown in Fig-5. (ii). Color of Finger Guide: Black
8.2 Quantity 1 No in bottom bezel
8.3 Mechanical Dimensions The shape, size and pitch distance between each Finger guide shall be as per HAL supplied 3D model.
9 Interfaces (Refer Fig.6)
9.1 Video Input (i). Video Interface for the Display Unit-3 of trainer aircraft shall be Display Port. (ii). HAL will generate the display graphics and the same will be fed to Display Unit-3 of trainer aircraft by using Display Port.
9.2 Input Power Supply (i). The Display Unit-3 of trainer aircraft shall work with 28V DC power supply. (ii). HAL will provide 28V DC power supply in the cockpit. Vendor shall convert 28V DC to the input power supply required by Display Unit-3 of trainer aircraft. (iii). The Display Unit-3 shall have protection against electrical power fluctuations and EMI/EMC.
9.3 Electrical Grounding Requirements The equipment shall be grounded to prevent ground loops & ground returns common to signal & power circuits. Vendor shall provide effective shielding for signal circuits for protecting the personnel from electrical hazards.
9.4 Electrical Bonding Requirements Adequate electrical bonding is to be provided for Display Unit-3 of trainer aircraft. Chassis bonding should be through pin(s) on the connector considering that the Display Unit-3 of trainer aircraft would be installed on a metallic structure.
9.5 Interface Connectors for Display, Data and Unit Power Following interface connectors shall be provided on the rear chassis of the unit: (i). Display: Display Port connector with locking mechanism. (ii). Ethernet: Circular RJ-45 connector with locking mechanism. (iii). Unit Power and intensity control: Industrial grade circular connector with locking mechanism. (iv). Vendor shall supply mating connectors for Unit Power & intensity control circular connector, Display Port and Ethernet connectors.
10 Physical Parameters
10.1 Mechanical Dimensions 88(H) x 88(W) x 184(D) in mm Detailed drawings / 3D model of the actual aircraft unit shall be provided to the vendor by HAL after placement of P. O.
10.2 External Surface Finish Matt Black Finish over one coat of primer on all external surfaces.
10.3 Displays Enclosure/ casing Material Aluminium Alloy 6061, T6 - Commercial Grade
10.4 Mechanical Installation Unit shall be mountable on the Main Instrument Panel using mounting screws
10.5 Identification Label of Unit The unit shall have the identification label fastened/riveted to the chassis firmly at a place easily accessible and better visibility.
10.6 Unit Weight The Display unit-3 of trainer aircraft weight shall not exceed 1.8 Kg
10.7 Packaging The unit shall be packed inside the carton box along with suitable shock absorbing foam to enable long distance transportation by road.
11.1 Mechanical, Ethernet, Electrical, Video Interface Control Document to be worked out jointly during design phase.
11.2 All components to be industrial grade with high reliability.
3.2.3.2. Spare LCD panels with make, model and Ethernet IO Modules for Display Unit-3 meeting the requirements mentioned in the above Table-3 for Display Unit-3 is to be provided.
3.2.4. Display Unit-4 of Trainer aircraft 3.2.4.1. The Display Unit-4of Trainer aircraft shall have an LCD touch screen panel and the same shall be installed in the enclosure of dimensions as specified in Table-4. The representative Display Unit-4 is shown in Fig-7 below: The technical requirements of LCD touch screen panel and other controls of Display Unit-4 of trainer aircraft are given in Table-4. Vendor shall supply the Display Unit-4 of trainer aircraft equipped with the following components/features:
Table-4: Technical requirements of Display Unit-4 of trainer aircraft
No. Nomenclature Requirement
1.1 Display Type LCD- Capacitive Touch Screen which shall be operative with pilot hand gloves also. Touchscreen information to be provided on Ethernet interface.
1.2 Back lighting LED
1.3 Active Viewing Area 4.5 inches (114.3 mm) (H) ×2 inches (50.8 mm) (V) Tolerance: ± 2mm
1.4 Display Resolution 834 (H) ×370 (V) pixels or better
1.5 Display Refresh rate 50 Hz or more
1.6 Display viewing angle (i). Left: 45° (minimum) (ii). Right: 35° (minimum) (iii). From top: 30° (minimum) (iv). From bottom: 30° (minimum)
1.7 Display Brightness The minimum brightness shall be 300 Cd/M2 or better
1.8 Display Contrast Ratio 400:1 or better
2 Dual Concentric Knob
2.1 Operation Inner (smaller) and outer (larger) concentric rotary knobs is a potentiometer with continuous rotation including momentary center push switch for the Inner (smaller) rotary knob.
2.2 Quantity 1 No.
2.3 Rotation direction Both Clockwise and Anti-clockwise
2.4 Rotary Control Knob dimensions The shape and size of the rotary knob shall be as per HAL supplied 3D model.
2.5 Knob Characteristics (i). Color of Rotary Knob: Black (ii). Status of operation of rotation and momentary push of the rotary knob shall be provided on Ethernet interface. (iii). Vendor to visit HAL during design phase for further details of rotation of larger and smaller rotary knob.
3 Volume/Squelch Knob (Dummy)
3.1 Operation A single volume knob is a potentiometer with centre push
3.2 Quantity 1 No
3.3 Rotation direction Both Clockwise and Anti-clockwise
3.4 Rotary Control Knob dimensions The shape and size of the rotary knob shall be as per HAL supplied 3D model.
3.5 Knob Characteristics (i) Color of Rotary Knob: Black (ii) Status of operation of rotation and momentary push of the rotary knob shall be provided on Ethernet interface.
4 Option Selection Switch (OSS) Push Buttons: HOME & Direct-To Key
4.1 Operation Momentary push
4.2 Quantity 2 Nos. in the right bezel
4.3 Mechanical Dimensions The shape, size and pitch distance between each OSS shall be as per HAL supplied 3D model.
4.4 OSS Pushbutton Characteristics (i). Color of Pushbuttons: Black (ii). Pushbutton switch shall be momentary action switches, having tactile snap action feedback. (iii). Vendor to measure the force to operate the OSS Push buttons during design phase and shall install a switch meeting the force feel requirements. (iv). Status of operation of OSS push buttons shall be provided on Ethernet interface.
5 Photocell (Dummy)
5.1 Operation The marking shall be carried out as shown in Fig-7. The shape and size of the dummy photocell marking shall be as per HAL supplied 3D model.
6 Illuminated Marking
6.1 Illuminated marking Characteristics (i). All the push buttons shall have markings or legends. Details of font shall be provided during design phase. The markings and/or legends on the push buttons and bezel shall be illuminated. (ii). Color of marking in Unit Power OFF condition: White translucent. (iii). Color of marking in Unit Power ON condition: Green. (iv). Vendor shall vary the intensity of the illumination based on the illumination control knob setting in the simulator. The bezel illumination voltage details will be provided to the vendor by HAL after placement of P.O.
7.1 Description A SD card slot shall be provided on the front left side of bezel which shall be used based on HAL requirement.
7.2 Operation This slot shall allow to insert and eject the SD card. The data available on the card shall be transferred to simulation computer in the simulator through Ethernet/USB interface. The status of card inserted or ejected from the slot shall also be provided on Ethernet interface. Make and model of SD card will be provided by HAL during design phase and for any further details vendor to visit HAL during design phase.
7.3 Quantity 1 no. in the front left bezel 1 no. of SD card
8.1 Bezel Characteristics (i). Bezels shall be in Matt Black color. (ii). Bezel dimensions shall be as per HAL supplied 3D model.
9 Day/Night Brightness
9.1 Brightness Characteristics Vendor shall vary the brightness of the display panel based on the Day/Night selection switch setting in the simulator. Vendor to visit HAL during design phase for further details and exact intensity of brightness variation based on Day/Night selection switch.
10 Interfaces (Refer Fig.8)
10.1 Video Input (i). Video Interface for the Display Unit-4 of trainer aircraft shall be Display Port. (ii). HAL will generate the display graphics and the same will be fed to Display Unit-4of trainer aircraft by using Display Port interface.
10.2 Input Power Supply (i). The Display Unit-4 of trainer aircraft shall work with 28V DC power supply. (ii). HAL will provide 28V DC power supply in the cockpit. Vendor shall convert 28V DC to the input power supply required by Display Unit-4of trainer aircraft. (iii). The Display Unit-4 shall have protection against electrical power fluctuations and EMI/EMC.
10.3 Electrical Grounding Requirements The equipment shall be grounded to prevent ground loops & ground returns common to signal & power circuits. Vendor shall provide effective shielding for signal circuits for protecting the personnel from electrical hazards.
10.4 Electrical Bonding Requirements Adequate electrical bonding is to be provided for Display Unit-4. Chassis bonding should be through pin (s) on the connector considering that the Display Unit-4of trainer aircraft would be installed on a metallic structure.
10.5 Interface Connectors for Display, Data and Unit Power Following interface connectors shall be provided on the rear chassis of the unit: (i). Display: Display Port connector with locking mechanism. (ii). Ethernet: Circular RJ-45 connector with locking mechanism. (iii). Unit Power: Industrial grade circular connector with locking mechanism. (iv). Vendor shall supply mating connectors for Unit Power & intensity control circular connector, Display Port and Ethernet connectors.
11 Physical Parameters
11.1 Mechanical Dimensions 66 (H) ×157 (W) ×300 (D) in mm Detailed drawings / 3D model of the actual aircraft unit shall be provided to the vendor by HAL after placement of P. O.
11.2 External Surface Finish Matt Black Finish over one coat of primer on all external surfaces
11.3 Displays Enclosure/ casing Aluminium Alloy 6061, T6 - Commercial Grade
11.4 Mechanical Installation Unit shall be mountable on the Main Instrument Panel using mounting screws
11.5 Identification Label of Unit The unit shall have the identification label fastened/ riveted to the chassis firmly at a place easily accessible and better visibility
11.6 Unit Weight The Display Unit-4 of trainer aircraft weight shall not exceed 1.9 Kg
11.7 Packaging The unit shall be packed inside the carton box along with suitable shock absorbing foam to enable long distance transportation by road.
3.2.4.2. Spare LCD touch screen panels with make, model and Ethernet IO Modules for Display Unit-4 meeting the requirements mentioned in the above Table-4 for Display Unit-4 is to be provided.
4.1. Operating Conditions All the equipment viz. Cockpit Displays supplied by the vendor should work without any performance degradation under the following operating conditions: (i). Operating Temperature: a) 22 degree C to 27 degree C in simulator environment. b) -10 degree C to +40 degree C for the components used in display units. (ii). Operating Humidity: 35% to 60% non-condensing with outside air temperature from -10 degree C to +50 degree C. Vendor to provide the OEM’s data sheets/catalogues, COC and any other relevant documents wherein the above operating conditions are mentioned for acceptance.
4.2. Storage Conditions All the equipment viz. Cockpit Displays supplied by the vendor should work without any performance degradation under the following storage conditions: (i). Temperature: -10 degree C to +55 degree C (ii). Humidity: 90% RH at 40 degree C Vendor to provide the OEM’s data sheets/catalogues, COC and any other relevant documents wherein the above storage conditions are mentioned for acceptance.
HINDUSTAN AERONAUTICS LIMITED MCSRDC Division Marathalli Post Bangalore - 560 037. INDIA
Commercial Terms and Conditions (For Indigenous supplier) of Tender - Part of Technical Bid - Annexure - 2
Tender Ref. No. MC/S461/2129/24/1
Name of Work: REPLICA COCKPIT DISPLAYS FOR COCKPIT PROCEDURE TRAINERs (CPTs) & FIXED BASE FULL MISSION SIMULATOR (FBFMS) OF TRAINER AIRCRAFT
Name of the Vendor/ Firm:
Quotation Ref. No.:
PLEASE INDICATE YOUR RESPONSE/ COMPLAINCE/ ACCEPTANCE TO THE FOLLOWING TERMS (MANDATORY) AND UPLOAD AS A PART OF TECHNICAL BID
Sl. No RFQ terms & conditions Vendor Compliance (remarks wherever required)
1 Tender Due Date: The due date for submission of quote is as indicated in Main RFQ through e-procurement mode only.
PRE-BID Meeting: A pre bid meeting will be arranged on 23.04.24 through video conference (MS Team) at 09.30 Hrs (IST). All the bidders are invited to attend the meeting in order to understand the requirement and clarify any doubts before submission of bids. All the Interested vendors have to forward the e-mail IDs of attendees for the pre bid meeting to email ID: [email protected] (AND) [email protected] latest by 22.04.24 to enable us to send the MS team link for Video Conference.
2 Validity of the Quotation: Price quoted should be net and unless otherwise specified should remain valid for our acceptance for a minimum of 180 days from the closing date of enquiry and the materials / service offered should be perfectly kept under provisional reservation for this quotation.
3 Submission of Tender: a) Response to bid through HAL e-Procurement portal should be uploaded in the e-Portal. Response to bid through e-Procurement should be uploaded in the e-portal only. Bid submitted by bidder’s authorized dealer / distributor/channel partner should accompany with ink signed / digitally signed authorization letter of the bidder to whom tender has been originally issued. In the absence of authorization letter, the bids submitted shall be considered as unsolicited. b) Vendors should ensure the bids are submitted as per RFQ attached in PDF form well before due date and time of tender. Vendor may note technical bid should include technical aspects only. If prices are indicated in the technical bid or attached as a part of technical bid even in the form of PDF, the offer will not be considered for evaluation.
4 Late Tender: a) Bid received after the due date and time specified in the tender shall be considered as late tender and will not be considered. HAL e-portal does not allow upload / submission of any document after due date and time has elapsed. b) HAL will not be responsible for inability of bidder to upload the tender documents in e-procurement. c) HAL reserves the right to reject late or incomplete tender.
5 Opening of Tenders: In respect of two bid system, technical bid will be opened on the tender opening date as indicated in the main RFQ. After technical evaluation, the Commercial bids of those bidders who are technically acceptable will be opened.
6 Tender Evaluation: a) The tender will be evaluated on Groupwise basis as indicated in price bid. b) Bid with lowest price conforming to the specification will be considered for placement of order. Lowest technically acceptable offer with variance in tender terms and conditions such as credit terms, delivery, penalty for late delivery etc. may be accepted on merits, after required loading towards such factors having direct financial impact in comparative price statement. c) If two or more bidders quote the same price, HAL reserves the right to seek revised offer from the same bidders and placing order on revised L-1 offer. If same situation prevails then HAL reserve the right to place order on any of them. d) If the lowest bidder has not offered full quantity, for the balance quantity HAL reserves the right to source from other bidders on L1 price. e) Conditional discounts will not be considered in evaluation of tender. f) Applicability of the Taxes (IGST/CGST etc.) should be explicitly indicated by the bidder in his response either in percentage or in absolute terms. In the absence of this input the offer would be considered all inclusive.
7 Conflict of Interest: Any bidder having a conflict of interest, which substantially affects fair competition, shall not be eligible to bid in this tender. Bids found to have a conflict of interest shall be rejected as nonresponsive. A bidder in this Tender Process shall be considered to have a conflict of interest if the bidder: a) directly or indirectly controls, is controlled by or is under common control with another Bidder; or b) receives or have received any direct or indirect subsidy/ financial stake from another bidder; or c) has the same legal representative as another bidder for purposes of this bid. A Principal can authorize only one representative, and the representative also should not represent or quote on behalf of more than one Principal. However, this shall not debar more than one Authorised distributor from quoting equipment manufactured by an Original Equipment Manufacturer (OEM), in procurements under Proprietary Article Certificate; or d) has a relationship with another bidder, directly or through common third parties, that puts it in a position to have access to information about or influence the bid of another Bidder or influence the decisions of the Procuring Entity regarding this Tender process; or participates in more than one bid in this tender process; or e) Participation in any capacity by a Bidder (including the participation of a Bidder as sub-contractor in another bid or vice-versa) in more than one bid shall result in the disqualification of all bids in which he is a party. However, this does not limit the participation of a non-bidder firm as a sub-contractor in more than one bid; or f) would be providing goods, works, or non-consulting services resulting from or directly related to consulting services that it provided (or were provided by any affiliate that directly or indirectly controls, is controlled by, or is under common control with that firm), for the procurement planning (inter-alia preparation of feasibility/ cost estimates/ Detailed Project Report (DPR), design/ technical specifications, Terms of Reference (ToR)/ Activity Schedule/ schedule of requirements or the Tender Document etc.) of this Tender process; or g) has a close business or family relationship with a staff of the Procuring Organization who: i) are directly or indirectly involved in the preparation of the Tender document or specifications of the Tender Process, and/or the evaluation of bids; or ii) would be involved in the implementation or supervision of resulting Contract. h) In cases of authorised distributors quoting on behalf of their principal manufacturers, an authorised distributor cannot represent two manufacturers or quote on their behalf in a particular tender enquiry. There can be only one bid from the following:39 i) The principal manufacturer directly or through an authorised distributor on his behalf; and ii) Authorised distributor on behalf of only one principal.
8 Parallel Arrangement: Any Order awarded to the successful bidder as a result of this tender, will be on non-exclusive basis. HAL reserves the right of entering into parallel contract(s)/ release parallel Order(s) with any other firms now or hereafter
10 Eligible Goods & Services: a) Country of Origin: The term “origin” used in this clause means the place from where the Services (and incidental Goods, including subcontracted components) are arranged and delivered, or manufactured.
11 b) Bidder’s country which shares a land border with India: Any bidder from a country, which shares a land border with India will be eligible to bid in this tender only if the bidder is registered with the Competent Authority (i.e. the registration committee constituted by the Department for Promotion of Industry and Internal Trader (DPIIT). However, the bidders from those countries (even if sharing a land border with India) to which the Government of India has extended lines of credit or in which the Government of India is engaged in development projects are not required to register with Competent Authority and will be eligible to bid in this tender. Bidder from a country, which shares a land border with India, for the purpose of this Order means:- i) An entity incorporated, established or registered in such a country; or ii) A subsidiary of an entity incorporated, established or registered in such a country; or iii) An entity substantially controlled through entities incorporated, established or registered in such a country; or iv) An entity whose beneficial owner is situated in such a country; or v) An Indian (or other) agent of such an entity; or vi) A natural person who is a citizen of such a country; or vii) A consortium or joint venture where any member of the consortium or joint venture falls under any of the above. Unless otherwise stipulated in the Contract, country of origin of ‘Services’ and related ‘Goods’ under the contract shall have their origin in India or other countries and must conform to the declaration, made by the Vendor in its bid regarding but not limited to any restrictions on certain countries with land-borders with India. The successful bidder shall not be allowed to sub-contract works to any contractor from a country, which shares a land border with India unless such contractor is registered with the Competent Authority.
12 c) Minimum Local Content: Minimum Local content (Make in India Policy): The ‘local content’ requirement to categorize a Vendor as ‘Class-I local Vendor’ is minimum 50%. For ‘Class-II local Vendor’, the ‘local content’ requirement is minimum 20%. Nodal Ministry/ Department may prescribe only a higher percentage of minimum local content requirement to categorize a Vendor as ‘Class-I local Vendor/ ‘Class-II local Vendor’. For the items, for which Nodal Ministry/ Department has not prescribed higher minimum local content notification, it shall be 50% and 20% for ‘Class-I local Vendor’/ ‘Class-II local Vendor’ respectively. Please refer the document - "Appendix_A_Purchase_Pref_Policy" for policy details Please indicate details of Local content and Category in Annexure-3 of RFQ That the bidder has to indicate MLC as part of offer & Self Certificate and Auditor Certificate might have also indicated MLC as per their certification. In case there is difference in those values, the lowest of them will be considered as the applicable MLC & the offer will be dealt accordingly. Other MLC information will be treated as invalid. Vendor’s status as MSEs: It is relevant to note that as per Government of India direction, the aspect of MSEs policies also included in the tender and the same is covered in the other terms & conditions which are part of RFQ. The aspect as indicated below would be applicable for procurement which falls under indivisible category. * If any Indian vendor satisfies the requirement of MSEs stipulation and also falls within the purchase preference margin as called for in MSME policy (in case of matching L1 price) will be considered for ordering 100% of tendered quantity. * In case no MSEs qualifies for purchase preference or do not match with L1 price then the total tendered quantity will be ordered on L-1 bidder per this subject purchase preference policy. Concurrent application of public procurement policy for both MII and MSE shall be governed as per the OM vide No. F.1/4/2021-PPD dated 18/05/2023 from PPD, DoE, MoF.
13 Non-conformities between Figures and Words: In case of non-conformities/errors are observed in responsive tenders between the quoted prices in figures and in words. The same shall be resolved in the following manner, discretion of HAL in this regard is Final: i) If, in the price structure quoted for the required goods / services, there is discrepancy between the unit price and total price (which is obtained by multiplying the unit price by the quantity), the unit price shall prevail and the total price corrected accordingly; ii) If there is an error in a total corresponding to the addition or subtraction of sub-totals, the sub-totals shall prevail and the total shall be corrected; and iii) If there is a discrepancy between words and figures, the amount in words shall prevail. Such a discrepancy in an offer should be conveyed to the bidder asking him to respond by a target date and if the bidder does not agree to HAL's observation, then the bid is liable to be rejected.
14 Repeat Order: HAL reserves the right to place repeat Order up to 100% of the value of the original order (statutory levies shall be paid as applicable) within 12 months from the date of completion of the original order. The prices, terms and conditions of the repeat order shall be the same as that of the original. However, placement of repeat order is not guaranteed and this will be at the sole discretion of HAL. Repeat Order can be placed by any Division/Office of HAL including the Division/Office which has originally placed the purchase order.
A Bank Guarantee Clauses:
1 Security Deposit: The successful vendor, shall have to deposit 5% of the value of the order as Security Deposit (to be calculated only on basic cost excluding taxes & duties, if such details are furnished separately in the bid submitted) within 15 days of receipt of the purchase order, by demand draft or bank guarantee in a prescribed format of HAL from a schedule bank in India/ bank of international repute (for Foreign vendors), valid up to 60 days after the completion of contract period/last supply. This Security Deposit will bear no interest and will be returned only after the contract is completed to the entire satisfaction of HAL. In case, quotes received without indicating the break-up details of GST, ED etc. and order placed subsequently on composite value (without indicating break-up details of taxes & duties) then the Security Deposit to be sought on the composite value (including taxes & duties). a) In case the contract is not executed to the entire satisfaction of HAL the security deposit shall be forfeited, besides initiation of risk purchase action. b) No claim will be entertained against HAL either in respect of interest, if any due on the security deposit or depreciation in value. c) On due performance and completion of the contract in all respects, the security deposit will be returned to the vendor, without any interest, on presentation of absolute “No Demand Certificate” and upon return in good condition of any specifications, drawings, samples or any other property belonging to the purchaser, which may have been issued to the vendor. NOTE: Loading factor of 5% shall be considered while preparing Price Comparative Statement for bidders who have not agreed for submission of Security Deposit.
2 Performance Bank Guarantee: Vendor shall furnish a Performance Bank Guarantee (PBG) (including e-Bank Guarantee) as per HAL’s format for 10% of the order value (to be calculated only on basic cost excluding taxes & duties, if such details are furnished separately in the bid submitted) valid up to end of the warranty period from a scheduled bank in India/ Bank of International repute (for foreign vendor) from the date of acceptance/commissioning or otherwise equivalent amount shall be retained till completion of warranty period and other obligation of Purchase Order/ contract. NOTE: In case vendor does not agree for Performance Bank Guarantee/ retention of equivalent amount, the offer shall be summarily rejected.
B Clauses with regard to Supplies:
1 Packing: The Vendor will be held responsible for the stores being sufficiently and properly packed for tropical storage and for transport by rail, road, sea or air so as to ensure their being free from loss or injury on arrival at their destination. The packing and marking of packages shall be done by and at the expense of the vendor. Each package shall contain a Packing Note quoting Purchase Order number and date showing its contents in detail. Each shall be properly marked with Purchase Order No., Consignee’s name & address, packagehandling instructions etc. The package shall have adequate provision for handling during transit.
2 Receipt & Despatch: The Vendor is responsible for obtaining a clear receipt from the Transport Authorities specifying the goods dispatched. He will not book any consignment on a said to contain’ basis. If he does so, he does it on his own responsibility. HAL will take no responsibility for short deliveries or wrong supply of goods when the same are booked on said to contain’ basis. HAL shall pay for only such stores as are actually received by them in accordance with the contract.
3 Quantity: a) The quotation must be in the unit in which the quantity is indicated in the enquiry. If it is otherwise, conversion data must be furnished. b) HAL reserves the right to order quantity less than indicated in the enquiry/ quoted for by bidder, at the prices quoted, without any reference to the bidder
4 Quality & Workmanship: 1) Generally the stores shall be of the best quality and workmanship. Contractor shall comply with the contract in all respects be to the satisfaction of HAL. Where tenders are called for in accordance with ‘particulars’, the contractor’s tenders to supply in accordance with such `particulars’ shall be deemed to be an admission on his part that he has fully acquainted himself with the details thereof and no claim on his part which may arise on account of non-examination or insufficient examination of the ‘particulars’ will in any circumstances be considered. The contractor shall supply the stores in accordance with the ‘particulars’ unless any deviation is authorised as an exception expressly specified in the Purchase Order. 2) TheStores/Goods supplied shall conform to the standards, if mentioned in the TechnicalSpecifications, or, where no applicable standard is mentioned, to the authoritative standards appropriate to the Goods’ country of origin. Such standards shall be the latest issued by the concerned institution.
5 Inspection, Consequences of Rejection: The goods on receipt in HAL will be subject to inspection and tests, if necessary and HAL inspector’s decision as regards acceptance/rejection of goods shall be final and binding between the parties. (In case of Plant & Machinery, goods shall be finally inspected & accepted only after successful commissioning) If any stores are rejected, then HAL shall be at liberty to: a) Either: i) Allow the contractor to re-submit stores in replacement of those rejected within a time specified by HAL, the contractor bearing the cost of freight in such replacement without being entitled to any extra payment, (or) ii) Buy the quantity of stores rejected or other of a similar nature elsewhere at the risk and cost of the contractor without effecting the contractor's liability as regards the supply of any further consignments due under the contract, (or) iii) Terminate the contract and recover from the contractor the loss HAL may thereby incur. The contractor shall not be entitled to any gain on the repurchase, b) Any stores rejected by HAL’s Inspector must be removed by the contractor within 14 days from the date of receipt of intimation of rejection and at his own cost, failing which the contractor shall be liable to pay storage charges at 1% for each day of delay on the invoice value of the stores. If the stores are not removed within a month from the date of intimation of rejection, the stores will be liable, to be sold by HAL at the contractor’s risk and responsibility and the proceeds adjusted towards storage charges. c) In case any payment is made against delivery and it is found that the supplied item is rejected during inspection/commissioning, contractor will be required to choose any one of the following options to collect the rejected item for replacement: i) Refund the amount paid and collect the item for replacement. ii) Submit a Bank Guarantee for the amount already paid and collect the item for replacement. iii) Bring the replacement item to HAL and collect the rejected item.
6 Supply of Alternative Item (wherever applicable): In case bidder is quoting for an alternative part number it should be confirmed that the offered part is fully interchangeable with the required part. Applicable descriptive literature/ catalogue if any may please be enclosed by the bidder with offer (at least two copies).
7 Shelf Life: Where stores offered have a limited shelf-life, kindly indicate the life involved and confirm that in the event of an order from us, only newly manufactured stores with the maximum possible shelf-life at the time of dispatch will be offered for shipment. In respect of rubber items such as seals etc., having curing date, the item should not have been manufactured earlier than 6 months of dispatch.
8 Deliveries, Consequences of Breach: The date of delivery stipulated in the Purchase Order shall be deemed to be the essence of the Contract, and delivery must be completed on or by the dates mentioned in the Purchase Order or the tender. Should the Vendor fail to deliver the stores or any consignment thereof within the period prescribed for such delivery, HAL shall be entitled at their option: a. To recover from the Vendor as per liquidated damages, and not by way of penalty, a sum of 0.5% of the price of any stores which the contractor has failed to deliver as aforesaid, for each week or part thereof during which the delivery or such stores may be in arrears subject to a maximum of 10% of the price of the stores in default (or) b. To purchase elsewhere, with or without notice to the Vendor on the account and at the risk of the Vendor, the stores not delivered or others of a similar description (where other exactly complying with the particulars are not available), HAL’s decision in this respect will be final (or) c. To terminate the contract in the event of action being taken under Para – (a) & (b) above, the Vendor shall be liable for any loss which HAL may sustain on the account, but the Vendor shall not be entitled to any gain on repurchases made against default.
9 Extension of Time: If an extension is desired by the Vendor/Vendor, then Vendor/Vendor shall apply for extension of time to HAL at least 15 days prior to the date of delivery without prejudice to the rights of HAL, then HAL may grant extension of time for any cause which HAL may deem proper and the decision of HAL in this respect to be final and binding and cannot be questioned in any manner whatsoever.
10 Training/ Factory Acceptance Test (wherever applicable): Vendor shall impart free training to HAL Personnel in the area of programming, operation, mechanical maintenance and electronic/electric maintenance at Vendor’s work and also during commissioning. Further boarding, lodging & travel of HAL’s personnel shall be borne by HAL.
C Product Support Clauses:
1 Product Support/ Obsolescence: Vendor shall provide product support for a minimum period of 20 years with regard to necessary spares and services. In case of obsolescence of products / sub systems / components, the same has to be communicated to HAL in regular intervals for necessary action by HAL. Even after the said mandatory period, vendor would be bound to give at least two years notice to the HAL/end user prior to closing the production line so as to enable a Life Time Buy of all spares before closure of the said production line. All upgrades and modifications carried out on the equipment during its lifecycle must be intimated to HAL.
2 Warranty (i). The Replica Cockpit Displays and its associated accessories supplied by the vendor shall carry onsite warranty for 24 months from the date of acceptance by HAL as per Technical requirement (ii). The vendor shall warrant that the items supplied by the vendor shall conform to the technical requirements of Replica Cockpit Display units for CPT and FBFMS of trainer aircraft mentioned in document no. MCSRDC/SIM-HTT40/TR/RCD/01/00 dated 30 Jan 2024 shall perform according to the said technical requirements. Any repair or replacement or maintenance arising during warranty period to meet the technical requirements shall be done free of cost by the vendor. The Replica Cockpit Display units and associated accessories supplied shall be free from defects in materials & workmanship and fit for the intended purpose. (iii). Vendor shall either repair or replace the faulty item during warranty period at free of cost. Vendor shall put all the efforts to provide the warranty services on highest priority as & when defect is notified to the vendor.
3 Post-Warranty Service: Arrangements for after sales service and maintenance (authorized service centre) in India on site during warranty & post warranty period should be clearly indicated providing with name, address, phone, Mob no, email Id of the contact person, infrastructure along with spare parts inventory held by your Authorized Technical Service Center. The Vendor to indicate the validity period of authorization for the technical service center.
D Clauses related to available Recourse for Breach by Vendor:
1 Liquidated Damages: In the event of an order, we reserve the right to collect a sum of 0.5% per week excluding taxes of delay or part thereof, subject to a maximum of 10% as our claim-towards liquidated damages on the undelivered part of the order. Note: In case bidders does not agree with Liquidated Damages, loading factor to the extent of LD not agreed shall be considered while preparing Price Comparative Statement and offer will be evaluated accordingly.
2 Penalties for Misdemeanors: (Note: The below sub clause (a) and (c) both are applicable before execution of the contract or placing of Purchase Order on a successful bidder and (b) shall be applicable only after execution of contract or placing of Purchase Order.) Without prejudice to and in addition to the rights of the HAL to other remedies as per the Tender-documents or the contract, If the HAL concludes that a (prospective) bidder/ Vendor directly or through an agent has committed a misdemeanor in competing for the tender or in executing a contract, the HAL shall be entitled, and it shall be lawful on his part to take appropriate measures, including the following:
a) If Bidder/s bids are under consideration in any procurement: i) Enforcement of Bid Securing Declaration in lieu of forfeiture or encashment of Bid Security. ii) Calling off of any pre-contract negotiations, and; iii) Rejection and exclusion of Bidder from the Tender Process b) If a contract has already been awarded: i) Termination of Contract for Default and availing all remedies prescribed thereunder; ii) Encashment and/ or Forfeiture of any contractual security or bond relating to the procurement; iii) Recovery of payments including advance payments, if any, made by the HAL along with interest thereon at the prevailing rate;
c) Remedies in addition to the above: i) In addition to the above penalties, the HAL shall be entitled for any of the following action/s, and it shall be lawful on his part to: File information against Bidder or any of its successors, with the Competition Commission of India for further processing, in case of anti-competitive practices; ii) Initiate proceedings in a court of law against Bidder or any of its successors, under the Prevention of Corruption Act, 1988 or the Indian Penal Code or any other law for transgression not addressable by other remedies listed in this sub-clause. iii) Remove Bidder or any of its successors from the list of registered Vendors for a period not exceeding two years. Vendors removed from the list of registered vendors or their related entities may be allowed to apply afresh for registration after the expiry of the period of removal. iv) Initiation of suitable disciplinary or criminal proceedings against any individual or staff found responsible. v) Debar a bidder/ Vendor from participation in future procurements without prejudice to HAL’s legal rights and remedies. Debarment shall automatically extend to all the allied firms of the debarred firm. In the case of Joint Venture/ consortium, all its members shall also stand similarly debarred: HAL may debar a bidder or any of its successors from participating in any Tender Process undertaken by all its procuring entities for a period not exceeding two years commencing from the date of debarment for. HAL shall maintain such a list which shall also be displayed on their website. HAL may debar a bidder from participating in any Tender Process undertaken for a period not exceeding three years commencing from the date of debarment for misdemeanors. HAL shall maintain such a list which shall be circulated to all its Divisions.
3 Exit Clause: Exit criteria: The contract/order may be terminated under the following circumstances: i) In the event of unsatisfactory performance by the Seller during the contract period, or any of the information provided by the Seller is found to be untrue, or Seller is found to have attempted to influence any person involved with the contract through unethical means, the contract shall be terminated with 03 months advance notice without any financial implication to Buyer. Notwithstanding the foregoing, in cases where it is found that a Seller is engaged in unethical practices, they shall be barred from participating in the future contracts for a period of 02 years. ii) If there is change in Buyer requirement, contract shall be terminated with 03 months advance notice. The liability of Buyer in this case will be agreed mutually. In the event of termination of contract by either party the Seller shall ensure the following: a) IPR’s are transferred to Buyer to enable Buyer to proceed on the work with other Seller. Seller also will render all assistance till the other Seller fully take over the balance work. (If applicable) b) Transfer title and deliver all or any part thereof of the supplies, materials, work-in-progress, finished Products, Tooling, drawings and data produced or acquired by Seller specifically for the Product being terminated. c) Supply of products and its components / spares at least for a period of 10 years from the date of such termination. iii) The Seller is declared bankrupt or becomes insolvent. iv) The delivery of material is delayed due to causes of Force Majeure by more than 06 months. v) Based on the decision of the Arbitration Tribunal
4 Termination for Default of Seller or for other reasons: HAL shall have the right to short close present Contract in part or in full by giving 1 month prior notice to the Vendor, in any of the following cases:- a) The work is delayed or cancelled for causes attributable to force majeure. b) The requirement is withdrawn by HAL’s Customer. c) The Vendor is declared bankrupt or becomes insolvent. d) It is noticed that the firm has utilized the services of any agent to get the resulting Order and paid any commission to such agent. e) As per decision of the Arbitration Tribunal. f) In case any part of the Order is subcontracted by the Vendor without prior permission of HAL. g) If the performance of the Vendor is not found satisfactory during the execution of work. In any of the above stated case, no claim of damage etc., by the Vendor will be allowed.
5 Termination for Default of Either of the Party (mutual termination): Either of the Party shall have the right to short close present Contract in part or in full by giving 1 month prior notice to the other Party, in any of the following cases:- a) The work is delayed or cancelled for causes attributable to force majeure. b) The requirement is withdrawn by the end Customer. c) Either of the Party is declared bankrupt or becomes insolvent. d) It is noticed that either of the Party has violated/breached the Integrity. e) As per decision of the Arbitration Tribunal. f) Either of the Party has assigned the contract to a third party without prior permission from other party. g) If the performance of either of the Party is not found satisfactory to the other Party during the execution of work. In any of the above stated case, no claim of damage etc., by the defaulting Party will be allowed.
6 Insolvency: If Vendor enters into liquidation, whether compulsory or voluntary (other than amalgamation or reconstruction with another party taking over all its rights as well as commitments) or becomes insolvent or suffers a receiver of the whole or part of its asset to be appointed, i) Shall forthwith notify the same to HAL and the HAL shall have the right without prejudice to his other rights or remedies to terminate the unexecuted part of this Contract. ii) In such an event, HAL shall become entitled forthwith to get the refund within 30 days of all the advance payments received by Vendor and expenditure incurred by as a part of its obligations under this contract it has not fulfilled. In such an event if applicable, Vendor is liable for return of any materials/items (including drawings, designs etc) to HAL, which are held at his end as a part of the obligations under this contract.
7 Indemnity: The successful bidder/Vendor shall defend, indemnify and hold HAL harmless from and against all actions, causes of action, liabilities, claims, suits, judgment, liens, awards, damages of any kind and nature whatsoever and expenses and costs of litigation to the extent such claims arise out of infringement of any IPR, patent, copyright, trademark or involve wrongful use of trade secret or confidential information or negligence attributable to the Vendor.
8 Appropriation: Whenever under this contract any sum of money is recoverable from any payable by the contractor, HAL shall be entitled to recover such sum by appropriating in part or whole by deducting any sum then due or which at any time thereafter may become due to the contractor in this or any other contract entered by HAL as a whole its Divisions and Branch Offices etc., held by him alone or in partnership with others. Should this sum be not sufficient to cover the full amount recoverable, the contractor shall pay to HAL on demand the remaining balance due.
9 Risk purchases: The Vendor will supply quality items as per approved sample and also the quantity intended by the concerned Division in full as per terms and conditions of respective orders. In case the Vendor fails to execute the order either in terms of quality or in quantity, HAL reserves the right to procure from elsewhere at the risk and cost of the Vendor and any extra expenditure incurred due to this purchase is payable by the Vendor.
E Mandatory Clauses as per Ministry or Govt. of India:
1 Bribes and Gifts Any bribe, commission, gift or advantage given, promised or offered by or on behalf of the Vendor or his parties, agent or servant or any one on his or their behalf to any officer, servant, representative or agent of HAL or any person on his or their behalf in relation to the obtaining or to the execution of this or any other contract with HAL shall in addition to any criminal liability which the Vendor may incur, subject to the Vendor to the cancellation of this and all other contracts with HAL and also to payment of any loss or damage resulting from any such cancellation thereof. Any question or dispute as to the commission of any offence under the present clause shall be settled by HAL in such manner and on such evidence or information as they may think fit and sufficient and their decision shall be final and conclusive.
2 Immunity to Government of India It is understood and agreed that the Government of India is not a party to this agreement and has no liabilities, obligations or rights hereunder. It is expressly understood and agreed that HAL is an independent legal entity with power and authority to enter into contracts solely in its own behalf under the applicable Laws of India and General Principles Contract Law. The vendor shall agree, acknowledge and understand that HAL is not an agent, representative or delegate of the Government of India. It is further understood and agreed that the Government of India is not and shall not be liable for any acts, omissions, commissions, breaches or other wrongs arising out of the contract. Accordingly, vendor expressly waives releases and foregoes any and all actions or claims against the Government of India arising out of this contract, not to sue the Government of India as to any manner, claim, and cause of action or thing whatsoever arising out of or under this agreement
3 Agents/Agency Commission (Note: HAL has not appointed/authorized any person/agent to deal with the vendors in respect of the said contract. In case, if someone claims and interacts with the vendors it shall be duty of the vendors to bring such instances to the notice of HAL Management). The Vendor confirms and declares to the Buyer that the Vendor is the original manufacturer or authorized distributor/stockist of original manufacturer or Govt. Sponsored/ Designated Export Agencies (applicable in case of countries where domestic laws do not permit direct export by OEMs) of the stores referred to in this offer/contract/Purchase order and has not engaged any individual or firm, whether Indian or Foreignwhatsoever, to intercede, facilitate or in any way to recommend to Buyer or any of its functionaries, whether officially or unofficially, to the award of the contract/purchase order to the Vendor; nor has any amount been paid, promised or intended to be paid to any such individual or firm in respect of any such intercession, facilitation or recommendation. The Vendor agrees that if it is established at any time to the satisfaction of the Buyer that the present declaration is in any way incorrect or if at a later stage it is discovered by the Buyer that the Vendor has engaged any such individual/firm, and paid or intended to pay any amount, gift, reward, fees, commission or consideration to such person, party, firm or institution, whether before or after the signing of this contract/ purchase order, the Vendor will be liable to refund that amount to the Buyer. The Vendor will also be debarred from participating in any RFQ/ Tender for new projects/program with Buyer for a minimum period of five years. The Buyer will also have a right to consider cancellation of the Contract/ Purchase order either wholly or in part, without any entitlement or compensation to the Vendor who shall in such event be liable to refund all payments made by the Buyer in terms of the Contract/ Purchase order along with interest at the rate of 2% per annum above Secured Overnight Financing Rate (SOFR) (for foreign vendor) and Marginal Cost of Funds-based Lending Rate (MCLR) of State Bank of India plus 2% per annum (for Indian vendor). The Buyer will also have the right to recover any such amount from any contracts/ Purchase order concluded earlier with Buyer.
4 Make In India Considering the huge and continuous requirement, HAL suggests the successful bidder to explore the possibility of manufacturing of the offered items in India to promote Govt. of India’s Make in India Policy. At this stage, HAL proposes to buy the systems/ items directly from the bidder for the firm requirement indicated above. However, for anticipated/future requirement, HAL requests successful bidder to submit the roadmap/proposal for HAL’s review for manufacturing of the offered system/item in India by setting up manufacturing facility in India or through joint venture in India.
5 Fall Clause The price quoted shall be in no event exceed the lowest price at which you sell the supplies or offer to sell supplies of identical description for similar quantity/terms to any person(s)/ organization including the purchases by any department of the Govt. of India, the State Govt. or any statutory undertaking of the Govt. of India/ State Govt., as the case may be during the period till the completion of the performance of the order placed and during currency of the order. If at any time during the said period, the contractor reduces the sales price, sells or offers to sell such supplies to any person/ organization including the purchaser or any department of Central Govt. or any Dept. of State Govt., or any statutory undertaking of the Central or State Govt., as the case may be at a price lower than the price chargeable under the contract, Seller shall forthwith notify such reduction/ sale or offer to sale to the HAL and the price payable under the contract for the supplies supplied after the date of coming into force of such reduction or sale or offer to sale shall stand correspondingly reduced.
F Dispute Resolution Mechanisms
1 Settlement of Disputes and Arbitration a) Below clause is applicable to organizations other than PSUs/ DPSUs: Amicable Settlement: Any dispute or difference whatsoever arising between the parties out of or relating to the construction, meaning, scope, operation or effect of this contract or the validity or the breach thereof shall be settled by bilateral discussions. In case of technical disputes involving confidential matters, the issue shall be referred to a high level technical authority for each party, appointed for this purpose. Any dispute, which cannot be settled amicably as above within 60 days from the date on which either party informs the other in writing by a notice that such dispute, disagreement or question exists, shall be settled by Arbitration.
1 Arbitration: The Arbitration Proceedings shall be conducted in India under the Indian Arbitration and Conciliation Act, 1996 and its subsequent amendments from time to time. The award of such Arbitration shall be enforceable in Indian Courts only. The arbitration tribunal shall be consisting of Sole Arbitrator, who shall be nominated by both parties mutually within one (1) month from the date of invoking Arbitration clause by the effected party, failing which the Arbitrator may be nominated under the provisions of Indian Arbitration and Conciliation Act, 1996 and its subsequent amendments from time to time. In case if both Parties agree for an Arbitration Tribunal consisting of three Arbitrators, then out of three Arbitrators two Arbitrators shall be appointed by each party to the Contract and the so appointed two Arbitrators shall jointly appoint the third Arbitrator who shall be the Presiding officer. In the event of a vacancy caused in the office of the Arbitrator, the party/parties which/who nominated such Arbitrator shall be entitled to nominate another in the place of retiring/outgoing Arbitrator and the arbitration proceedings shall continue from the stage they were left by the retiring Arbitrator. The seat of Arbitration shall be at Bengaluru, India and the language of the Arbitration shall be English. The award of the Arbitration shall be final and binding between the parties to this Agreement. Each party shall bear its own cost of preparing and presenting its case. The cost of Arbitration including the fees and expenses of the Arbitrator shall be shared equally between the Parties, unless otherwise awarded by the Arbitration Tribunal. Except as may be required by law, neither a party nor its representatives may disclose the existence, content, or results of any arbitration hereunder without the prior written consent of other party.
1 b) Applicable only for MSEs: The Micro, Small and Medium Enterprises Development (MSMED) Act, 2006 provides parties to a dispute (where one of the parties is a Micro or Small Enterprise) to be referred to Micro and Small Enterprises Facilitation Council if the dispute is regarding any amount due under Section 17 of the MSMED Act, 2006. If a Micro or Small Enterprise, being a party to dispute, refers to the provisions in MSMED Act 2006, these provisions shall prevail over the Indian Arbitration and Conciliation Act, 1996.
1 c) Settlement of Disputes and Arbitration with PSUs/ DPSUs: In the event of any dispute or difference relating to the interpretation and application of the provisions of commercial contract(s) between Central Public Sector Enterprises (CPSEs)/ Port Trusts inter se and also between CPSEs and Government Departments/Organizations (excluding disputes concerning Railways, Income Tax, Customs &Excise Departments), such disputes or differences shall be taken up by either party for resolution through AMRCD (Administrative Mechanism for Resolution of CPSE’s Disputes) as mentioned in DPE OM No. 05/0003/2019-FTS-10937 dated 14-12-2022 and the decision of AMRCD on the said dispute will be binding on both the Parties.
2 Supply and Payment during Arbitration: Supply under the contract shall if reasonably possible continue by mutual agreement during the Arbitration proceedings and no payment due to or payable by HAL, will be withheld without reasonable cause and merely on account of the pendency of such proceedings.
3 Jurisdiction and Governing/Applicable laws: The Court at Bangalore/place of Division only shall have jurisdiction to deal with and to decide any legal matter whatsoever arising out of this contract. This contract shall be governed by and subject to and interpreted and construed in accordance with the Laws of Republic of India, which are in force from time to time. Nothing in this contract shall entitle the Parties to this contract to exercise the rights, privilege and powers conferred under this contract in any manner which will contravene the Laws of India.
G Payment related clauses:
1 Payment terms applicable for MSMEs: HAL is registered on TReDS platform (Trade Receivable Discounting Systems), as being promoted by GOI directives. It is suggested that all the MSME Vendors to take note of the same and consider for registration on any TReDS platform and avail the platform services which is being made available as per Government initiative.
2 Firm Prices The contract prices will be firm and fixed as per contract terms till execution of contract and exclude subsequent claims or price increases of any kind.
3 Payment For Stores/Supplies: Unless otherwise agreed to between the parties, HAL will effect payment for the delivery of the stores by Electronic Bank Transfer (ECE/RTGS) to the Vendor’s bank account as notified to HAL on submission of bills in triplicate. Payment for the stores on each delivery will be made to the contractor after goods are received and passed by inspection. Normally 30 days will be allowed forinspection afterreceipt of goods.
4 Statutory Variation Clause: Unless otherwise stated in the contract, statutory increase in applicable GST rate only during the original delivery period shall be to Procuring Entity’s/Buyer account. Any increase in the rates of GST beyond the original completion date during the extended delivery period shall be borne by the Vendor. The benefit of any reduction in GST rate must be passed on to the Procuring Entity/Buyer during the original and extended delivery period. However, GST rate amendments shall be considered for quoted HSN code only, against documentary evidence, provided such an increase of GST rates takes place after the last date of bid submission.
H Confidentiality and IPR related clauses:
1 a) The Vendor shall hold confidential technical data and information supplied by the Purchaser or on behalf of the Purchaser and shall not reproduce any such technical data or information or divulge the same to any third party without the prior written consent of the Purchaser. The Purchaser shall hold confidential technical data and information supplied by the Vendor or on behalf of the Vendor and shall not reproduce any such technical data or information or divulge the same to any third party without prior written consent of the Vendor except as far as may be necessary for either party to carry out its obligations under this Contract. b) In the development orders, where technical inputs/assistance is provided to the vendors, the Intellectual Property Rights (IPR) will rest with HAL. Vendor will not directly deal with HAL’s customer for these items. c) For the purpose of this Tender/Contract/Agreement, the Bidder/Contractor/ Vendor shall not store, copy or disclose HAL’s data and information whether in written, machine readable or other tangible form or disclosed orally, that is of value to HAL. Also, Bidder/Contractor/Vendor agrees to use HAL’s data only for the purpose under this Tender/Contract/Agreement, restrict disclosure to any other person or entity or third party and shall safeguard the provided data including from cyber security risks etc. Bidder/Contractor/Vendor should promptly return within 90 days HAL’s data in original media and should not keep HAL’s data, upon expiry of Tender/Contract/Agreement or early termination of Contract/Agreement and certify that HAL’s data has been deleted permanently. Note: Non-adherence to this confidentiality clause by the Bidder/Contractor/Vendor shall be treated, as a material breach of this Tender/Contract/Agreement. The provisions of this clause shall survive and remain in force notwithstanding the termination or expiry of this Contract/Agreement.
2 IPR Clause for indemnification of HAL in case of Infringement of Third Party IPR: a) HAL shall have the right to use the Supplies/Services procured under the contract that may contain any Intellectual Property/ Intellectual Property Rights. Seller shall indemnify and protect at its own cost, HAL in respect of cost/claims/ liabilities (including attorney’s fees) arising from any violation of Intellectual Property Rights of any third party with respect to Supplies/Services provided by Seller. If HAL or HAL’s customer/s are unable to put to use the Supplies/Services or a portion thereof as a result of violation of the Intellectual Property of any third party, Seller shall within reasonable time at Seller’s own cost either, i) procure for HAL and HAL’s Customer/s the right to continue using the Supply/Service or, ii) replace or modify the Supplies/Services so that it becomes non-infringing or, iii) compensate HAL the amount equivalent to the cost of supplies procured/ to be procured, development cost already paid to seller and damages suffered by HAL arising due to inability to put to use the supplies/ services or a portion thereof. Intellectual Property for the purpose of this clause includes inventions, discoveries and improvements; know-how, works of authorship, technical data, drawings, specifications, process information, reports and documented information; and computer software(including without limitation, source code, object code, source code listings and object code listings that would enable the software to be reproduced or recreated), topology of integrated circuits, databases or any other such results of intellectual activity.
I Miscellaneous/Boilerplate Clauses:
1 Relationship of the Parties: It is understood that each party is an independent party and that all personnel engaged in the work under the Purchase Order/s that are supplied by either party shall in no sense be employees of the other party. It is further agreed that neither party shall have the right to act as the agent or legal representative of the other party or to bind the other party in any respect whatsoever or to incur any debts or liabilities in the name or on behalf of the other party.
2 Counterparts: This Agreement/Contract shall be signed in two counterparts, each of which will be deemed as an original document.
3 Survival of Special Clauses: The clauses dealing with arbitration and confidentiality shall survive and continue to have effect after the expiry or termination for any reason whatsoever of the services placed.
4 Assignment/Subcontract: Neither of the parties of this contract shall be entitled without the other party’s consent to assign or transfer to a third party all or part of the benefits or obligations of this contract.
5 Amendment to Contract/PO: Any amendment to Contract/ Purchase Order would be enforceable only if made in writing and duly signed by authorized representatives of both the parties hereto.
6 Waiver: Failure of either Party at any time to enforce any of the provisions of this Contract shall not per se constitute a waiver by that Party of any such provisions nor in anyway affect the validity of the Contract or any part hereof.
1 Tender conditions: a) Any order, resulting from the enquiry, shall be governed by the General Terms and Conditions of Contract of HAL and any party quoting against this enquiry shall be deemed to have read and understood these terms and conditions and to have quoted subject to these terms and conditions (Enclosed). b) When counter terms and conditions have been offered by a tenderer, HAL shall not be deemed to be governed by such terms and conditions unless specific written acceptance thereof has been given by HAL. c) Any terms & conditions which has not been the part of the bid or Purchase Order, if put forward in subsequent correspondence, shall not be considered by HAL. d) Disregard of any instructions, may result in your offer being ignored. e) Canvassing by tender form, including unsolicited letter on tender submitted or post tender corrections shall render their tenderers liable for rejection
2 No Relaxation of Prior Experience & Prior Turn-over Criteria for Micro & Small Enterprises (MSEs) & Start-ups since items are to be used in Trainer Aircraft Replica Cockpit,which is mission critical so exemption cannot be provided.
3 Price: The bidder is required to indicate prices against individual items. a) Price quoted should be on F.O.R. Destination basis, for delivery at HAL Stores inclusive of all charges including transit insurance. b) Indian Bidder should quote in Indian Rupees and payment will be made in Indian Rupees. c) Tenderers should clearly mention whether the prices hold good when the full quantity of enquiry is not ordered but only a part of it. Unless otherwise mentioned, it would be assumed that the rates hold good even when lesser quantities than those enquired of are ordered. Any increase in prices at a later date for ordering lesser quantities will not be agreed to.
4 Taxes: Rate of GST HSN code/ SAC or any other Tax chargeable should be clearly indicated in the offer / bid as inclusive in the price quoted or extra. If not indicated, HAL will assume that the rates quoted are inclusive of taxes.
5 Delivery Period: As the timeline is the essence of this programme, significant deviations from the development and delivery schedules specified above will not be acceptable to HAL and such bids will be rejected.
Note 1: T0 : Date of placement of Purchase Order Note 2: The items should be supplied as per the delivery schedule indicated above. As time is the essence of this programme for integration of Replica Cockpit Display units on simulator, deviations from the schedules will not be acceptable to HAL and may render the bid submitted by the vendor liable to be rejected.
6 Terms of Payment: 100% Payment will be made within 30 days after delivery and acceptance of goods/services and upon submission of Original Invoice. Payment will be through RTGS / NEFT or any other latest electronic payment method.
7 Import Content: In case the item/product offered by Indian vendor has import content, then the value of import content shall be indicated in the quotation (in FE/ INR as the case may be).
8 DOCUMENTS: Following documents where ever applicable should be submitted along with the bid 1. GST Regsitration Certificate 2. HAL Vendor resgistration Certificate 3. ECS Mandate 4. MSME Resgistration on UAM portal (if applicable) 5. Authorised Distributor Certificate from OEM (if applicable)
9 Government e-Marketplace (GeM) registration: Any bidder participating in the tender should also got registered in GeM portal and should provide GeM seller ID as a part of their offer. In case, such GeM seller ID not provided as a part of their offer, Vendor need to take up with GeM Authority for onboarding on GeM portal and provide such details, which will be necessary requirement for placement of order by HAL for this tender.
10 Indicate your GeM registration Number
11 Debarred/ banned or blacklisted (Yes- Banned; No- Not banned)
12 Bidders to confirm whether, they have been debarred/ banned/ blacklisted or not by any Division/ Office of HAL/ PSE/PSU/CPSE/Ministry of Defence or any institutions/offices of State & central GOI. Also upload self certification for not banned status along with bid documents in portal. If at later stages its been found that your company is banned or blacklisted or if you have provided any false certification, suitable action will be initiated as deemed fit by HAL.
13 Denial Clause: In case of any delay in delivery caused due to default of the Vendor and during such delayed period if any increase in statutory duties and/or upward rise in prices due to the Price Variation Clause (PVC) and/or any adverse fluctuation in foreign exchange arises then such additional amount/s is/are to be borne by the Vendor, apart from the payment of agreed Liquidated Damages. Besides HAL reserves its right to get any benefit of a downward revisions in statutory duties, PVC and foreign exchange rate, taken place during such delayed period, effecting the original agreed price.
14 ISO 45001:2018 STANDARD GUIDELINES: The vendor/Vendor/ contractor shall ensure requirements with respect to ISO 45001:2018 standard guidelines clause A 8.1.4. This includes equipment’s, installations and materials are safe for use by workers as intended by ensuring: a) equipment is delivered according to specification and tested to ensure it works as intended b) installations are commissioned to ensure they function as designed c) materials are delivered according to their specifications d) any usage requirements, precautions or other protective measures are communicated and made available (E.g. Safety instructions, Hazard communication Symbols, SDS, Etc.)
15 Please indicate following: Contact person name Postal address, email ID for future correspondence / clarifications and also provide email and phone no of CEO/MD/GM/Proprietor
16 Bidders to confirm whether, they have been debarred/ banned/ blacklisted or not by any Division/ Office of HAL/ PSE/PSU/CPSE/Ministry of Defence or any institutions/offices of State & central GOI. Also upload self certification for not banned status along with bid documents in portal. If at later stages its been found that your company is banned or blacklisted or if you have provided any false certification, suitable action will be initiated as deemed fit by HAL.
Mission & Combat System Research & Design Centre HINDUSTAN AERONAUTICS LIMITED Marathalli Post Bangalore - 560 037 INDIA
Public Procurement (Preference to Make in India) - Part of Technical Bid - Annexure-3
Tender Ref. No. MC/S461/2129/24/1
Name of Work: REPLICA COCKPIT DISPLAYS FOR COCKPIT PROCEDURE TRAINERs (CPTs) & FIXED BASE FULL MISSION SIMULATOR (FBFMS) OF TRAINER AIRCRAFT
Name of the Vendor/ Firm:
Quotation Ref. No.:
PLEASE INDICATE YOUR RESPONSE/ COMPLAINCE/ ACCEPTANCE TO THE FOLLOWING TERMS (MANDATORY) AND UPLOAD AS A PART OF TECHNICAL BID
Note In line with Public Procurement (Preference to Make in India), Order 2017 & its amendments issued by Govt. of India & with a view to support the Indian industries, HAL has implemented “Purchase Preference Policy”. The “Purchase Preference” is applicable for the “Class-I Local Supplier” for the goods/services/works covered in this tender subject to the following terms & conditions:
(a) The subject item falls under indivisible category (b) The offers sought only from Class-l & Class-Il local suppliers suppliers, out of local suppliers
Definitions: A supplier or service provider, whose goods, services or works offered for procurement, has local content: a. Equal to or more than 50% : Class-l local supplier. b. More than 20% but less than 50% : Class-II local supplier. c. Less than or equal to 20% : Non-local supplier.
Sl. No. HAL RFQ terms & conditions Vendor Compliance/ Remarks
1 a. Equal to or more than 50% : Class-l local supplier. b. More than 20% but less than 50% : Class-II local supplier.
Mention your category i.e., Class-l or Class-II local supplier
2 ‘Local content’ means the amount of value added in India (i.e. indigenous items/services added in the offered products/services/works) be the total value of the item offered (excluding net domestic indirect taxes) minus the value of imported content in the item (including all customs duties/IGST) as a proportion of the total value (excluding net domestic indirect taxes), in percent.
Indicate extent of Minimum Local Content in offered product/service and location of such value additions
3 The 'Class-l & II local supplier' should provide a “Self Certification” along with technical offer indicating that the item offered meets the minimum local content as called for in the tender at Sl.No.(1) above and provide the % of local content along with details of the location(s) at which the local value addition is made. In case of two bid tenders, it is mandatory to indicate compliance to MLC in technical bid zone.
4 In case the offers sought from only class I & II local suppliers, the offer received without indicating the percentage of local content & without self-certification will not be considered & rejected.
5 As mentioned above vendors shall enclose “Self Certification” along with offer
6 The ink-signed certificate shall be provided on vendor’s letter head along with the offer (in case of online tender, copy of ink-signed certificate can be considered subject to receipt of original certificate within 15 days of due date of tender). In case of non-submission of certificate, the purchase preference shall not apply.
Public Procurement (Preference to Make in India) policy in PDF form is enclsoed for your reference
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
Main_RFQ_2129.pdf
TENDER_DOCUMENT • 0.22 MB
CB12129NEW2.xlsm
TENDER_DOCUMENT • 0.02 MB
TB12129.xlsm
TENDER_DOCUMENT • 0.46 MB
TB12129T.pdf
TENDER_DOCUMENT • 0.59 MB
TB32129b.pdf
TENDER_DOCUMENT • 0.44 MB
SD_Format.pdf
TENDER_DOCUMENT • 0.62 MB
Appendix_A_Purchase_Pref_Policy.pdf
TENDER_DOCUMENT • 0.15 MB
Appendix_B_Type_I_and_II_Local_Content_Format_Both.pdf
TENDER_DOCUMENT • 0.11 MB
AS9100D.pdf
TENDER_DOCUMENT • 0.02 MB
Checklist1.pdf
TENDER_DOCUMENT • 0.10 MB
TB2L2129.xlsm
TENDER_DOCUMENT • 0.06 MB
Annexure_II_A_and_B_Land_Border_Sharing_Declaration.pdf
TENDER_DOCUMENT • 0.72 MB
TB32129.xlsm
TENDER_DOCUMENT • 0.02 MB
CB12129NEW1PDF.pdf
TENDER_DOCUMENT • 0.19 MB
PBG_Format.pdf
TENDER_DOCUMENT • 0.62 MB
TB2L2129b.pdf
TENDER_DOCUMENT • 0.48 MB
Encl_1.pdf
TENDER_DOCUMENT • 1.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .