ReDevelopment and Beautification of SHYAMA PRASAAD MUKHERJEE GARDEN, Near Gulaab Sagar Pond, KAPASAN Distt. Chittaurgarh (Raj.)

Amount

Constructing Wooden type Bamboo style Edging for plants and trees with min height 300 mm include finishing and foundation work complete in all respect. as per direction of engineer incharge.

Constructing wooden type Bamboo Style Railing Min height 3.00 Feet. Including RCC M-25 & Plaster Cemant Mortar 1:3 with Primer, Plastic paint Oxide Colour with Polish. as per direction of engineer incharge.

Constructing Wooden type Bamboo Style Bench as per below Specification:- Material:- RCC M-25, Length :- 8 Feet, height :- Total 36 Inch, (16 Inch from Ground Level & Support :- 18 Inch) Width :- 14 Inch, Plaster Cemant Mortar 1:3 with Primer, Plastic paint Oxide Colour with Polish. as per Attatch drawing &direction of engineer incharge.

Constructing GAZEBO with PERGOLAS in BENGALI Style made of RCC in circular shape having min. gate clearance height 3.20 M placed over min 6 circular pillars of size 10" Dia. Pillars shall be decorative in appearance with specified pedastal and top cap. Pergolas shall be constructed both side with min clearance height 3 mtr as per specified drawing and direction of engineer incharge. Double Deck With Staircase

Stone Crafted Rajasthani Art Element - Chatri with four pillars, stone jaali, top stone covering, base platform comprising outer dimension as 0.75x0.75x1.20(H) with warm white lighting inside for decorative look, all factory made ready to install on site, crafted in rakjasthan art sculpture work

Supplying and fixing decorative lamp of white sand stone over pillars as per architectural drawing and direction of engineer incharge. With Warm WhiteLighting Equipment Fittings, Connection Wire Etc All

Decorative Cast Iron Artifact type Light Poles around Open Seating Area for Aesthetic and Ambience Purpose in Evening Time : Specifications: 15W - 25CM-W x 75 CM-H Material :- ‎Metal Style :- ‎Modern Power and Plug Description ‎:- Electricity Special Feature :- Waterproof Embellishment ‎:- Waterproof Bulb Base ‎:- B22D Part Number ‎:- AD-Q-S10 Finish types :- ‎Metal Switch Installation Type ‎:- Ceiling Mount

Supply and Fixing of ISI Marked Material for Design Cut Letters with specific name over top of front façade with led luminaire lighting inside of approved quality with warranty and letter sheet of hard pvc fixed with adhesive and hinged over plain surface. Proposed Name of Garden Size - 18000 MM x 600 MM

Tensile Fabric Roofing : a. Providing steel and fabric material, Steel structure fabricating, Painting, Fabric making and Installation. b. Supply of tools and equipment for the steel structure erection works. c. Touch-up of paint due to erection damage. d. Cleaning-up of tensile structure work scrap on work completion : Fabric Specifications  Fabric : Polyster yarn tensile fabric  Flame retardancy : M2  UV retardancy : 100%  Light transmission : 0-1%  Solar reflection : 77%  Resistant to fungal : Yes  Temperature resistance: -30oC to +70oC  Flex resistance : No cracks (DIN 53359-A)  Breaking strength Warp : 2900 N/5cm (ISO 1421/1 : 2016)  Breaking strength Weft : 2700 N/5cm (ISO 1421/1 : 2016)  Tear strength Warp : 300 N (DIN 53363 : 2003)  Tear strength Weft : 300 N (DIN 53363 : 2003)  Adhesion : 100 N/5cm (ISO 2411 : 2017)  Colour : White  Warranty period: 10 years* Structure specifications  Structure material : ISI marked heavy duty coil MS of grade YST 201 of make Apollo/ similar  Plates and component material : Stainless steel  Uses one coat of primer and two coats of enamel paint (White)

Decorative Cast Iron Artifact type Light Poles around Open Seating Area for Aesthetic and Ambience Purpose in Evening Time

Supply and Fixing of MS Iron 3MM Sheets with CNC - computer numerical control method for developing desried design pattern as per requirement fixed with frame to availble iron and boundary railing structure with approved quality

Complete Job: Fountain Work: Civil Work Part has Been Taken In SOR Items, Others Elements as Plumbing Related all Pipe lines, connections, nozzles, pump set, valves, drain outlets, traps, tape etc. then Electrical Decorative Lighting for Illumination of Whole flowing water effects as wiring, controls, mcb, led light, focus light, water protection etc. all functioning, then all Necessary repair or water proffing for finalization all inclusive with 1 Year maintenance complete.

SURF BOARD Provoding and fixing of Surf Board of size 910mm (Length) 860mm(Width)x:400mm(Height) fabricated with a center pipe of 100mm nominal bore shall be made form 'C' class G.I. Pipe the steeve pipe shall be made of 125mm 0D seamless pipe with thickness of smm and bolted to main frame with M10 SS bolts. the bottom Support shall be welded of M.S. Plate of Q 250 mm & 10mm thickness. the handle frame of 25NB shall be made from 'C' class G.I. pipe the paddie frame of 50NB shall be made from 'C' class G.I. pipe supported with 70X8mm bend M.S. flat and can be replacable the foundation to be used for fixing should be a structure and shall be made from center pipe G.I. of 80NB 'C' class welded with M.S. round plate of 250mm & 10mm thick. main pipe shall be supported with 25mm x 25mm M.S. angle of 3mm thickness and 20mm x 40mm CRC square pipes of 3 mm thickness. boshes shall be used of 70 mm Outer Diameter with 5mm thickness. the footests shall be made from aluminum casting material of size 320ins to be used of diameter 35mm,25mm and 17mm shall be made up from SAE 8620 bright the bearings shall be used of "6007zz" "62 and "6203zz" permanent lubricated sealed bearings shall be used of "6007zz" ( ) high tensile steel with galvanized nuts and bolts shall be used for assembly.the powder coating shall be done with pure polyester poeders of ackzonoble of berger paints with 60 to 70 Micron thickness. A16, A24 mm circlips shall be used for assembly. bolt M8X16 mm and NY lock nut of M8 shall be made of SS 304 used on nylon cap mounted on pins to protect bearings and pins from rain and dust, all complete as per drawing design. directions and approval of engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of

CROSS TRAINER Providing and fixing of cross trainer of size 1320 mm (Length) x 600mm (width) x1750mm (Height) fabricated with the main frame pipes of 80 NB shall be made of 'C' Class G.I. and pipe with single bend pipe with 250mm radius. The bottom support of M.S. round plate of 250 mm & 10mm thick. the Handle frame shall be made up of 25NB "C" Class G.I. Pipe the foundation Should be used for fixing is a structure and shall be made from center pipe of G.I. pipe of 80 NB "C" Class weled with M.S. round plate of 250 mm & 10mm thick. Main pipe should be supported with 25mm x 25 mm M.S. angle of 3 mm thickness and 20mm x 40mm and CRC Square pipes of 3mm thic to build structure bushes to be used which shall be made from M.S Pipe of 60mm OD with 5 mm thickness. the footrests shall be made from Aluminium casting material of size 130mm X310mmx5mm thickness and mounted on M.S. plate of size 130mmx310mmx3mm thick. Pmm x270mmx5mm for support to footrest of 200mmX250mm with 3mm thickness M.S. plate shall be used closting caps shall be made up of high quality fiber reinforced plastic material, the bearing shall be used are of "6007zz" permanent lubricated sealed bearing of reputed brand (SKF/FAG), High tensile steel with galvanized nut bolts shall be used for assembly. the carclips shall be used for assembly of berger with 60 to 70 micron thickness. all complete as per drawing, design, directions and apporoval cf Engineer-incharge regarding material, shape of equipment, colour (of Metal, seat and pedal), and fixing of equipment etc.all. shape of.

Provoding and fixing of thi-chi spinner (2 wheel) of size 700mm (length) x 1000mm (width) x 1280mm (height) fabricted with a center pipe of 200NB Shall be made up of "C" class G.I. pipe the handle movemetn round frame shall be made up from 25 NB "C" class G.I. pipe the foundation should be used for fixing is a structure and shall be made from center pipe of G.I. 80NB "C" class welded with M.S. round plate of 250mm & 10mm thick main pipe shall be supported with 25mm x25mm M.S. agnles of 3mm thickness and 20mm x 40mm CRC squre pipes of 3mm thickness. closing caps shall be made up of high quality fiber reinforced plastic material the pins to be used shall be made up of 25mm of SAE8620 bright material the bearing shall be used of "6201zz" & "6205zz" permanent lubricated sealed bearing of requted brand (SKF/FAG) high tensile S.S. nut bolts shall be used for assembly. fundation cover closing cap shall be made from FRP Material with 0.7 mm thicknes the cerclips used for assembly shall be of of A24 and A11 the nylon bush shall be used for handle knob. the powder coating shall be done with pure polyester powders from ackzonoble or berger paints with 60 to 70 micron thickness. bolt M8x16mm nd nylock nut of MB shall be made of SS 304 used on nylon cap mounted on pins to protect bearings and pips from rain and dust all complete as per drawing , design, directions and apporval of engineer in charge regarding material, shape of equipment, colour (of metal, seat and pedal) and fixing of equipment etc.

SEATED PULLER Providing and fixing of seated puller of size 1900mm (length) x 740mm (Width) x 1920mm (Height) fabricated with a center pipe is of 100NB shall be made from "C" class G.I. pipe Bottom support of M.S round plate of 250mm & 10mm thickness shall be welded All linkages shall be made up of 25NB "C" class G.I. pipe the handle frame of 32NB "C" class G.I. pipe the seat frame of 32NB "C" class G.I. pipe to build structure bushes to be used which shll be made from seamless pipe of 60mm O.D. and 5mm thickness as well as 60mm diameter solid bar bush shall be made from center pipe og G.I. of 80NB "C" class welded with M.S. round plate of 250mm & 10mm thick. Main pipe shall be supported with 25mm X 25mm M.S. angles of 3mm thickness and 20mm X 40mm CRC square pipes of 3mm thickness.foundation cover costing cap shall be made from FRP Material the seats and back rests to be fitted on the outer frames shall be made up of M.S. sheet of size 330 mm X 300mmX2mm thickness and deep and pressed in tools and diles to have uniform radius of 20mm with no sharp closing caps shall be made up of high quality fiber reinforced plastic material pips to be used of diameter 25mm and 17mm shall be made up from SAE 8620 bright material the bearings shall be used of "620zz" and "6203zz" permanent lubricated sealed bearing of requted brand (SKF/FAG) high tensile steel with galvanzed nuts & bolts shall be used for assembly. the cerclips to be used for assembly are of A16 the power costing shall be done with pure polyester powders of ackzonoble or berger paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and apporoval of engineer in Charge regarding material, shape of equipment Colour of metal , seat and pedal) and fixing of equipment etc.

SEATING & STNDING TWISTER providign and fixing of seating & standing twister of size 1700mm (Length) x 540mm(width)x 1250mm (Height) fabricated with a center pipe of 100mm NB shall be made from "C" class G.I. round pipe the M.S. round plate of 250 mm & 10 mm thickness shall be welded at bottom. handle and bottom sleeve pipe of 125mm OD with thickness 5mm should be provided for easy assembly, replacement and maintenance. the bottom frame of the seating & standing twister of 32NB 50 NB and 25 NB shall be made from "C"class G.I. pipe the handle frame of seating & standign twister of 25 NB & foot resting frame of seating side shall be made from "C" class G.I. pipe of 25mm NB the foundation should be used for fixing is a structure and shall be made from center pipe of G.I. of 80 NB "C" class welded with M.S. round plate of 250 mm & 10mm thick main pipe shall be supported with 25mm X 25mm M.S. angles of 3 mm thickness. and 20mm x 40mm CRCA square pipes of 3mm thickness. the twister plate to be fitted on the bottom frame shall be made up of M.S. round plate of size 300mm dimeter and 10mm thickness. closing caps shall be made up high quality fiber reinforced Plastic mterial. the pins to be used which shall be up of 35 mm SAE 8620 bright material. the bearings shall be made of fo "6205zz" permanent lubricated sealed bearing of reputed brand (SKF/FAG) high rensile steel with galvanized nuts & bolts shall be used for assembly the powder coating shall be done by pure polyester powder of berger paint with 60 to 72 micron thickness, all complete as per drawing, design, directions and approval of engineer-in-charge regading material, shape of equioment colour (of metal seat and pedal), and fixing of equipment etc.

PUSH UP BARS Providing and fixing of push up bars of size 1220mm (length) x 550mm (width) x 1700mm (Height) fabricated with the main frame of 100 NB shall be made from "C"class G.I. pipe the M.S. round plate of 250mm & 10mm thickness shall be welded at bottom the handle frame of 25 NB shall be made from "C" class G.I. pipe the foundation shoud be used for fixing is a structure and shall be made from center pipe of G.I. of 80 NB "c" class welded with M.S. round plate of 250mm & 10mm thick. main pipeshall be supported with 25 mm X 25 mm M.S. angles of 3 mm thickness and 20mm X 40mm CRC square pipes of 3mm thickness. closing caps shall be made up of high quality fiber reinforced plastic material foundation cover closing cap shall be made from FRP material, High tensile steel with galvanized unts & bolts shall be used for assembly. the powder coting shall be done with pure polyester powders of ackzonoble or berger paints with 60 to 70 micron thickness. all complete as per drawing, design, directions and apporval of engineer-in-charge regarding material, shape of equipmetn colour (of metal,seat and pedal) and fixing of equipment etc.

POMMEL HORSE Providing and fixing of pommet horse of size 2150mm (Length) x 800mm (Width) x 800mm (Height) Fabricated with the main frame of 80NB and 50Nb shall be made from "C" class G.I. pipe the handle frame of 32NB Shall be made from "C" class G.I.pipe 40mm x40mm CRC square pipes frame shall be placed on the 25mm x 25mm x 3mm M.S. Angle with 60 X 10m thickness flat should be used for support, Closing caps shall be made up of high quality fiber reinforced plastic material high tensile steel with galvanized nuts and bolts shall be used for assembly. the powder coating shall be done with pure polyester powder Ackzonoble or berger paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and approval of engineer-in-charge regarding material, shape of equipment colour (of metal, seat and pedal), and fixing of equipment etc.

CHEST PRESS Providing and fixing of chest press of size 200mm (Length) x 210mm (Width) x 220mm (Height) fabricated with the center pipe of 100NB shall be made up "C" class G.I. pipe the bottom shall be welded with support of M.S. round Plate of 250mm & 10mm thickness. the connecting pipe shall be made up from 25NB "C" class G.I.pipe the handle frame shall be made up from 32NB "C" class G.I. pipe to build structure bushes to be used which shall be made from MS seamless pipe of 60mm O.D and 5mm thickness as well as 60mm diameter sold bar bush shall be used the foundation should be used for fixing is a structure and shall be made from center pipe of G.I. pipe of 80 NB "C" class welede with M.S. round plate of 250 mm & 10mm thick. Main pipe shall be supported with 25mm x 25mm M.S. agnles of 3 mm thickness and 20mm X 40mm CRC square pipes of 3mm thickness the seats and back rests to be fitted on the outer frames shall be made up of M.S. sheet of size 330mm X 300mmX 2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20mm with no sharp edges. closing caps shall be made up of high quailty fiber reinforced plastic material foundation cover cap shall be made from FRP material with 0.7 thickness. pins to be used diameter 25mm and 17mm shall be made up from SAE 8620 bright material. bolt MBx16mm and nylock nut of MB shall be made of SS 304 used on nylon cap mounted on pins to protect bearings and pins from rain and dust, the bearings shall be used are of "6205ZZ" & 6203zz"permanent lubricated sealed bearing of reputed brand (SKF/FAG) high tensile steel with galvanized nuts & bults shall be used for assembly. the cerclips to be used for locking shall be made up of A24mm & A16mm the powder coating shall be done with pure polyster powder from Ackzonoble or Berger paints with 60 to 70 micron thickness] all con leter as per drawing, design, directions and approval of Engineer-in-charge regarding material, shape of equipment colour (of metal, seat and pedal), and fixing of equipment etc.

SIT BOARD DOUBLE providing and fixing of sit up board double of size 1760mm (Length) x 1140mm (width) x 660mm (height) fabricated with the main frame of 25mm NB shall be made from "C" class G.I. pipe FRP sheet of 3mm thickness shall be moulded on main frame the remaining frame of the sit up board of 32mm NB shall be made from "C" class G.I pipe the powder coating shall be done with pure polyester powder ackzonoble or berger paints with 60 to 70 micron thickness the foundation shoud be used for fixing as structure and shall be made from center pipe G.I. of 80NB "C" class welded with M.S. round plate of 250mm & 10mm thick. M.S. main pipe shall be supported with 25mm x M.S. angles of 3 mm thickness. and 25mmx40mm CRC square pipes of 3mm thickness all complete as per drawing design directions and approval of engineer-in-charge regarding material shape of equipment colour (of metal, seat and pedal) and fixing of equipment etc

DOUBLE TWISTER STANDY Providign and fixing of bouble Twister standing of size 1500mm (Length) x 600mm (width) x 1300mm (Height) Fabricated with a center pipe of 100NB shall be made from "C" Class G.I. material the bottom shall be welded with support of M.S. round plate of 250mm & 10mm thickness. The bottom frame of 32NB shall be made from "C" class G.I. pipe handle frame of 25NB shall be made from G.I. pipe the foundation should be used for fixing is a structure and shall be made from center pipe of G.I. of 80 NB "C" class welded with M.S. round plate of 250mm & 10mm thick. Main pipe shall be supported with 25 mm x 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. the Twister plate to be fitted on the bottom frame shall be made up of M.S. round plate of size 300mm and 10mm thick. Closing caps shall be made up of high quality fiber reinforced plastic material pins to be used of diameter 35mm shall be made up from SAE 8620 bright material the bearings shall be used are of "6205" permanent fubricated sealed bearing of reputed brand heigh tensile steel with galvanized nuts and bolts shall be used for assembly the powder coating shall be done with pure polyester powders from ackzsnoble paints with 60 to 70 micron thickness. all complete as per drawing desing directions and approwal of engineer-in-charge regarding material shape of colour (of metal seat and pedal) and fixing of equipment etc.

Description of Work / Item(s)

Amount

Garden Maintenance for Three Years For Permanent Guard, Two Staff for Maintenance of whole garden for Tree Trimming, All Cleaning, Grass Cutting & Maintaining, watering, tree shaping, All Toilet Cleaning and Maintaining, Etc as per Direction by Engineer In Charge