Loading
Loading…
Loading…
Tender Value
₹1.2 Cr
EMD Value
₹2.4 L
Closing Date
12 Oct 2026, 3:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
SOUTH
15 conditions · 4 needing a document upload
The Minimum Eligibility Criteria for open tenders costing Rs.50 Lakhs & above is given below:-Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Similar Nature of work-:-Any track work by manually or mechanical means involving deep screening or TSR or TRR or Casual renewals or TWR or Turnouts or dismantling of track etc.
18 conditions · 1 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Documents to be Submitted Along with Tender: (i) The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be.
Following documents shall be submitted by the tenderer
(a)Sole Proprietorship Firm: (i) All documents in terms of Para 10 of the Tender Form (Second Sheet) of General Conditions of Contract-2022 and Para 1.0 of Minimum Eligibility Criteria of Instructions/Special Conditions to the tenderers of tender document and as amended/corrected upto latest correction slip.
(b)HUF: (i) A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) All other documents in terms of Para 10 of the Tender Form (Second Sheet) of General Conditions of Contract-2022 and Para 1.0 of Minimum Eligibility Criteria of Instructions/Special Conditions to the tenderers of tender document and as amended/corrected upto latest correction slip.
(c)Partnership Firm: (i) All documents as mentioned in Para18 of the Tender Form (Second Sheet) of General Conditions of Contract-2022 andPara17 of the Tender Form (Second Sheet) of Instructions to the tenderers and conditions of tender of tender document and as amended/corrected upto latest correction slip
(d)Joint Venture (JV): All documents as mentioned in Para 17 of the Tender Form (Second Sheet)of General Conditions of Contract-2022 and Para16 of the Tender Form (Second Sheet) of Instructions to the tenderers and conditions of tender of tender document and as amended/corrected upto latest correction slip.
(e)Company registered under Companies Act2013: (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation (iii)A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv)All other documents in terms Para 10 of the Tender Form (Second Sheet) of General Conditions of Contract-2022 and Para 1.0 of Minimum Eligibility Criteria of Instructions/Special Conditions to the tenderers of tender document and as amended/corrected upto latest correction slip.
(f)LLP (Limited Liability Partnership): (i)A copy of LLP Agreement (ii)A copy of Certificate of Incorporation (iii)A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (v)An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (v)All other documents in terms of Para 10 of the Tender Form (Second Sheet) of General Conditions of Contract-2022 and Para 1.0 of Minimum Eligibility Criteria of Instructions/Special Conditions to the tenderers of tender document and as amended/corrected upto latest correction slip.
(g)Registered Society & Registered Trust: (i) A copy of Certificate of Registration (ii) A copy of Memorandum of Association of Society/Trust Deed (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv) Acopy of Rules & Regulations of the Society (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet) of General Conditions of Contract- 2022 and Para 1.0 of Minimum Eligibility Criteria of Instructions/Special Conditions to the tenderers of tender document and as amended/corrected upto latest correction slip. (iii)If it is NOT mentioned in the submitted tender that tender is being submitted on behalf of a Sole Proprietorship firm / Partnership firm / Joint Venture / Registered Company etc., then the tender shall be treated as having been submitted by the individual who has signed the tender. (iv)After opening of the tender, any document pertaining to the constitution of Sole Proprietorship Firm / Partnership Firm / Registered Company/ Registered Trust / Registered Society / HUF/LLP etc. shall be neither asked nor considered, if submitted. Further, no suo moto cognizance of any document available in public domain (i.e., on internet etc.) or in Railway's record/office files etc. will be taken for consideration of the tender, if no such mention is available in tender offer submitted. (v) A tender from JV shall be considered only where permissible as per the tender conditions. (vi) The Railway will not be bound by any change of power of attorney or in the composition of the firm made subsequent to the submission of tender. Railway may, however, recognize such power of attorney and changes after obtaining proper legal advice, the cost of which will be chargeable to the Contractor.
Sole proprietor/a company or a partnership firm/joint venture (JV)/registered society/registered trust / HUF/LLP, Power of Attorney etc: The tenderer whether sole proprietor/ a company or a partnership firm/ registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and f\lather to dealwith the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association /Board resolution, failing which tender shallbe summarily rejected. A separate power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, shall be submitted after award of work, specifically authorizing him/them to deal with allother contractualactivities subsequent to signing of agreement, if required. Note: A Power of Attorney executed and issued overseas, the document will also have to be legalized by the Indian Embassy and notarized in the jurisdiction where the Power of Attorney is being issued. However, the Power of Attorney provided by Bidders from countries that have signed the Hague Legislation Convention 1961 are not required to be legalized by the Indian Embassy if it carries a conforming Appostille certificate
Proposal for Miscellaneous P.Way works, Repairs to track, scattered renewal and repair under SSE(P-Way) Wani under ADEN(Warora) Under Sr.DEN(South)NGP jurisdiction in Nagpur division for 2 years.
DRMWNGP-95-2026-02~CR
DRMWNGP-95-2026-02
Open
Works - General
24 Months
Nagpur, Maharashtra
₹0
₹2.4 L
18 Sept 2026
18 Sept 2026
28 Sept 2026
122 items across 1 schedule · ₹1,89,31,767.23 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Up to 40 m long rail panel | RM | 1300.00 | 9.51 | 12,363 |
| 2 | Extra to Item no. 061011 for working on bridge | RM | 345.00 | 4.16 | 1,435.2 |
| 3 | For Casual/Scattered Rail Renewal work | RM | 1300.00 | 36.96 | 48,048 |
| 4 | For Casual/Scattered Rail Renewal work | RM | 1300.00 | 39.13 | 50,869 |
| 5 | Locations other than Ballasted Deck Bridge | Each | 1300.00 | 492.23 | 6,39,899 |
| 6 | Through Fitting Renewal (TFR) on PSC track, comprising of renewal of Grooved Rubber Pads, Liners and ERCs without damaging PSC sleepers. Scope includes removal of all fittings, cleaning of rail seat, rail flange at liner seats, and eye of Inserts with wire brushes and applying Grease Graphite Grade "O" (IS:408) to eye of insert and central leg of ERC with contractor's grease of Railway's specification, fixing all fittings in correct position and sealing liner edges with grease all complete including collection and stacking of released materials at nominated locations within SSE Jurisdiction as directed by Engineer-in-Charge. Note: All the fittings will be supplied at SSE/Stores/Depot. | Sleeper | 6200.00 | 23.7 | 1,46,940 |
| 7 | Through replacement of Grooved Rubber Sole pads(GRSP) on PSC sleepers duly removing the ERCs and liners and replacing the GRSP by just lifting the rail after cleaning the rail seat, refixing the liner and ERC after greasing o f ERCs, liners and Liner contact area including sealing with Contractor's Grease Graphite Grade 'O' (IS:408) duly cleaning of rust/scale of ERC, Metal /GFN liners & SGCI insert by using wire brush, scrapper/sand emery paper etc., with all contractor's labour, tools, plants including collection and stacking of released materials at nominated locations within SSE Jurisdiction and as directed by Engineer-in-Charge. Note: GRSP will be supplied at SSE/stores/depot. | Sleeper | 6200.00 | 21.11 | 1,30,882 |
| 8 | For 1.00m long fishplates | Joint | 100.00 | 105.45 | 10,545 |
| 9 | For 610 mm long fish plates. | Joint | 345.00 | 71.37 | 24,622.65 |
| 10 | Opening and refixing of Joggled fish plates provided to weld joints/rail of any rail section under traffic to enable examination of weld/rail by departmental official nominated by Engineer In charge and lubrication of fishplates by applying departmental Grease graphite grade 'O' (IS:408) to fishing planes and bolts by departmental black oil as per procedure laid down in latest version of IRPWM, including all tools required and as directed by Engineer-in-charge. Note: 1. Grease Graphite, black oil, fish bolts, K.Oil, wire brush, required for work shall be given by department and issued at concerned SSE/PW Stores. 2.Jammed fish bolts shall be cut using chisel and hammer and replaced with new bolt. | Set | 800.00 | 54.45 | 43,560 |
| 11 | Lubrication of ERCs and its liner contact area by removal of ERCs and Metal / GFN liners in rail panel, cleaning of rust / scale of ERC, Metal / GFN liners & SGCI insert by using wire brush, scrapper / sand emery paper etc supply and application of graphite grease, as prescribed by Railway for under side of liners & corresponding area of rail foot & SGCI insert with ERCs and re-fixing the same as per procedure prescribed in latest edition of IRPWM with contractors grease and all other tools & plants complete and as directed. Note: Each ERC in this item shall constitute 1 ERC and its Liner Contact area. | ERC | 138000.00 | 3.92 | 5,40,960 |
| 12 | Removing seized ERC from SGCI inserts of existing track by using suitable approved chemicals and re-fixing after greasing of insert eye and ERC with Contractor's grease of specified quality as per provisions of IRPWM, as directed by Engineer in-charge. Note: 1.List of Seized ERC along with location shall be prepared after inspection of SSE/P.Way and marked prior to execution of this item. 2. Due care shall be taken to avoid any damage to the sleeper 3.A penalty of 50% of the basic cost of new sleeper in nearest sleeper factory shall be levied on each, if SGCI insert is broken or sleeper gets cracked in the process. | ERC | 3200.00 | 48.89 | 1,56,448 |
| 13 | By using Railway's Grease graphite | Each | 4800.00 | 32.14 | 1,54,272 |
| 14 | Renewal of seized Plate/Rail screws on PSC Sleepers by using gas or any approved methods, duly drilling holes in broken screw and removing existing screw pieces from the holes along with existing dowels and fixing new contractor's dowels (procured from RDSO approved sources) and grouting around dowel with Epoxy materials of approved specification and refixing new Railway's rail/Plate screws duly greasing the s c r e w w i t h specified grease with all contractor's materials, consumables, tools & plants, labour with all lead, lift. Note: 1.Seized screws shall be identified and marked by JE/P.Way and verified at minimum SSE/P.Way In charge) level. 2. Due care shall be taken to avoid any damage to the sleeper 3.A penalty of 50% of the basic cost of new sleeper in nearest sleeper factory shall be levied on each, if sleeper gets damaged in the process. | Each | 1300.00 | 265.86 | 3,45,618 |
| 15 | Renewal of existing SEJ along with PSC sleepers under traffic block conditions as per approved drawing including fixing of special size bearing plate, rubber pad and other sleeper / rail fittings, greasing to the fittings, leading all new materials to site, transportation of released materials within a lead of 250m, cutting of Rails, drilling of holes, fixing of related fittings, providing temporary connection with fishplates till welding of SEJ is done and sleepers shall be given initial packing to make track fit for 20KMPH speed. Note: (1) Rail cutting and hole drilling shall be paid separately. (2) One set comprise complete SEJ on both rails at SEJ. | Set | 6.00 | 7,954.59 | 47,727.54 |
| 16 | Renewal of existing SEJ with improved SEJ with PSC sleepers under traffic block conditions as per approved drawing including fixing of special size bearing plate, rubber pad and other sleeper / rail fittings, greasing to the fittings, leading rails, sleepers & fittings to site, leading and stacking of released materials within a lead of 250m, cutting of Rails, drilling of holes, fixing of related fittings, providing temporary connection with fishplates till welding of SEJ is done and sleepers shall be given initial packing to make track fit for 20KMPH speed. Note: (1) Rail cutting and hole drilling shall be paid separately. (2) One set comprise complete SEJ on both rails at SEJ. | Set | 6.00 | 8,758.16 | 52,548.96 |
| 17 | Under Traffic Block Conditions | Set | 6.00 | 7,560.17 | 45,361.02 |
| 18 | 1 in 8½ Points & Crossing | Set | 6.00 | 13,945.32 | 83,671.92 |
| 19 | 1 in 12 Points & Crossing | Set | 6.00 | 18,971.96 | 1,13,831.76 |
| 20 | Derailing Switch | Set | 3.00 | 4,087.4 | 12,262.2 |
| 21 | Sleepers up to 2.85 m length | Each | 50.00 | 632.4 | 31,620 |
| 22 | Sleepers of length more than 2.85 m and up to 4.20 m | Each | 35.00 | 871.44 | 30,500.4 |
| 23 | Sleepers of more than 4.20 m length | Each | 35.00 | 1,373.66 | 48,078.1 |
| 24 | For 1 in 12 Turnouts | Set | 12.00 | 5,240.13 | 62,881.56 |
| 25 | For 1 in 8.5 Turnouts | Set | 12.00 | 4,192.1 | 50,305.2 |
| 26 | For 1 in 12 Turnouts (Sleeper No 1 to 25 and 5 approach sleepers) | Set | 6.00 | 1,697.92 | 10,187.52 |
| 27 | For 1 in 8.5 Turnouts & Derailing switches (Sleeper No 1 to 22 and 5 approach sleepers) | Set | 6.00 | 1,358.34 | 8,150.04 |
| 28 | For 1 in 12 Turnouts (Sleeper No 65 to 73 ) | Set | 6.00 | 1,219.83 | 7,318.98 |
| 29 | For 1 in 8.5 Turnouts (Sleeper No 43 to 48) | Set | 6.00 | 975.87 | 5,855.22 |
| 30 | Turnout sleepers of length up to 2.85 m | Each | 170.00 | 143.09 | 24,325.3 |
| 31 | Sleepers of length more than 2.85 m and up to 4.20 m | Each | 170.00 | 171.71 | 29,190.7 |
| 32 | Sleepers of length more than 4.20 m | Each | 65.00 | 186.02 | 12,091.3 |
| 33 | Depth of 250 mm below bottom of sleeper - For Plain Track : | TRM | 650.00 | 536.59 | 3,48,783.5 |
| 34 | Depth of 300 mm below bottom of sleeper - For Plain Track : | TRM | 650.00 | 604.68 | 3,93,042 |
| 35 | Depth of 250 mm below bottom of sleeper for Turnouts | TRM | 345.00 | 858.54 | 2,96,196.3 |
| 36 | Depth of 300 mm below bottom of sleeper for Turnouts | TRM | 345.00 | 967.49 | 3,33,784.05 |
| 37 | Lifting and packing for regrading the existing PSC sleeper track to required height / level in stages not exceeding 75mm or part thereof at a time, providing permissible ramp for the track, insertion of moorum / sand / stone ballast uniformly under the existing track and placing the same to safe approved gradient, gauge, cushion including levelling and one round of through packing to allow train movement at restricted speed of 30 kmph for a specified length with all leads & lifts and fixing, marking, painting rail level pegs at every 30m interval. Note: Lifting of track shall be done in stages as per procedure prescribed in latest edition of IRPWM to get the proposed final level as per approved working profile, as directed by Engineer in- charge. | TRM | 6900.00 | 185.83 | 12,82,227 |
| 38 | Boxing and profiling of ballast as per procedure prescribed in latest edition of IRPWM including cess dressing on both sides of track. The work will include removing excess ballast from track and putting the same in crib and shoulder by leading to a maximum of 50m including crossing of track, deweeding on ballast section etc and as directed by Engineer-In charge. | TRM | 24500.00 | 27.33 | 6,69,585 |
| 39 | Under Traffic Block Conditions: | cum | 1300.00 | 54.62 | 71,006 |
| 40 | For PSC Sleeper | TRM | 13500.00 | 92.94 | 12,54,690 |
| 41 | For PSC Sleeper Track with Sleeper Density of 1540 | TRM | 3500.00 | 130.11 | 4,55,385 |
| 42 | For PSC Sleeper Track with Sleeper Density of 1660 | TRM | 3500.00 | 143.12 | 5,00,920 |
| 43 | For PSC sleeper Track with Sleeper Density of 1540 sleepers/Km or more | TRM | 650.00 | 184.91 | 1,20,191.5 |
| 44 | Extra over Items 132011 to 132014 for working in yards | TRM | 650.00 | 47.99 | 31,193.5 |
| 45 | Without Rail tensor | TRM | 24000.00 | 34.21 | 8,21,040 |
| 46 | Replacing existing glued joint rail with cut rails or with glued joint rail or insertion of glued joint by cutting existing track under traffic condition by cutting rails, refixing with all rail sleeper fastenings and providing required gaps for carrying out welding as an alternative to drilling holes or joining rails with fish plates duly drilling holes as required including stacking of released material and as directed by engineer in-charge. Note: (1) Drilling holes & rail cutting will be paid separately. (2) Transportation of materials to the site of work from supply points, if more than 250m, shall be paid separately. | Each | 35.00 | 1,880.5 | 65,817.5 |
| 47 | With Contractor's hard wood block. | Each | 65.00 | 2,238.05 | 1,45,473.25 |
| 48 | Drilling holes of 16mm to 22mm dia. on all types of PSC sleepers and fixing the dowels with adhesive of RDSO approved quality for fixing check rails & guard rails, as directed by Engineer in-charge. | Each | 100.00 | 293.68 | 29,368 |
| 49 | Cleaning of side drains along the track including disposing of muck beyond Railway boundary as per instructions of Engineer in- charge to keep drains clean and clear in cuttings etc. | RM | 13500.00 | 33.61 | 4,53,735 |
| 50 | Removing weeds & bushes in ballast section and cess up to 3.95m from centre line of track in mid section & station yard, as specified by Engineer in-charge including disposal of branches, bushes outside cess/yard. | TRM | 60000.00 | 15.47 | 9,28,200 |
| 51 | For 60 Kg Rails | RM | 1300.00 | 47.33 | 61,529 |
| 52 | For 52 Kg Rails | RM | 1300.00 | 42.05 | 54,665 |
| 53 | For 60 Kg Rails | TRM | 5500.00 | 65.31 | 3,59,205 |
| 54 | For 52 Kg Rails | TRM | 7000.00 | 58.03 | 4,06,210 |
| 55 | 1 in 12 Turnout | Set | 10.00 | 1,193.04 | 11,930.4 |
| 56 | 1 in 8½ Turnout | Set | 6.00 | 763.26 | 4,579.56 |
| 57 | Derailing Switch | Set | 3.00 | 381.63 | 1,144.89 |
| 58 | Bridge Height Gauge | Each | 35.00 | 2,701.52 | 94,553.2 |
| 59 | For day time block working | TRM | 3500.00 | 19.74 | 69,090 |
| 60 | For night time block working | TRM | 10500.00 | 22.13 | 2,32,365 |
| 61 | Level crossing with asphalted surface | Sqm | 170.00 | 391.93 | 66,628.1 |
| 62 | Level crossing with CC block surface | Sqm | 170.00 | 338.15 | 57,485.5 |
| 63 | 1 in 8½ Turnouts (Under Traffic Block Conditions) | Set | 20.00 | 9,710.48 | 1,94,209.6 |
| 64 | 1 in 12 Turnouts (Under Traffic Block Conditions) | Set | 10.00 | 11,302.9 | 1,13,029 |
| 65 | Extra to Item no. 156011 for night block working | Set | 20.00 | 1,456.57 | 29,131.4 |
| 66 | Extra to Item no. 156012 for night block working | Set | 10.00 | 1,695.43 | 16,954.3 |
| 67 | 60 Kg - 110/90 UTS - Outside Track | Each | 35.00 | 216.45 | 7,575.75 |
| 68 | 52 Kg - 90 UTS - Outside Track | Each | 35.00 | 196.26 | 6,869.1 |
| 69 | 60 Kg - 110/90 UTS - On Running Line | Each | 65.00 | 277.33 | 18,026.45 |
| 70 | 52 Kg - 90 UTS- On Running Line | Each | 65.00 | 225.68 | 14,669.2 |
| 71 | Outside Track | Each | 65.00 | 52.95 | 3,441.75 |
| 72 | On Running Line | Each | 275.00 | 69.89 | 19,219.75 |
| 73 | Sleeper Spacing, Re-spacing / Squaring of sleeper by Hydraulic Sleeper Spacer with contractor's tools & plants, equipment, consumable with all lead & lift etc. complete, as directed by Engineer in-charge. Hydraulic Sleeper Spacer shall be as per RDSO's Specification No. TM/SM/17, dated 31.03.1992. | Each | 10500.00 | 71.85 | 7,54,425 |
| 74 | Extraction of jammed ERC by Heavy Duty Hydraulic Extractor with contractor's tools & plants, equipment, consumable with all lead & lift etc. complete, as directed by Engineer in-charge. Heavy Duty Hydraulic Extractor for jammed ERCs (10 Ton capacity) shall be used as per RDSO's Specification No. TM/SM/6, dated 8.05.1991. | Each | 650.00 | 35.6 | 23,140 |
| 75 | For lead up to 500 metre. | MT | 200.00 | 399.09 | 79,818 |
| 76 | For lead beyond 500 metre and up to 1 Km. | MT | 135.00 | 514.73 | 69,488.55 |
| 77 | Extra to Items no. 171032 for lead beyond 1 Km for every subsequent Km or part thereof and up to 10 Km | MT | 65.00 | 61.44 | 3,993.6 |
| 78 | Extra to Item no. 171031 and 171032 with contractor's Rail Dolly / Dip Lorry | MT | 35.00 | 28.72 | 1,005.2 |
| 79 | I n Wagon where mechanical handling is possible and traffic block is not required or in Truck / trailer | MT | 65.00 | 89.7 | 5,830.5 |
| 80 | For lead up to 500 metres | MT | 275.00 | 310.74 | 85,453.5 |
| 81 | For lead beyond 500 metre and up to 1 Km | MT | 135.00 | 460.7 | 62,194.5 |
| 82 | Extra to Items no. 172032 for lead beyond 1 Km for every subsequent Km or part thereof and up to 10 Km | MT | 135.00 | 47.92 | 6,469.2 |
| 83 | Extra to Item no. 172031 and 172032 with contractor's Rail Dolly/Dip Lorry. | MT | 69.00 | 30.98 | 2,137.62 |
| 84 | Lead up to 5 Km | MT | 65.00 | 176.93 | 11,500.45 |
| 85 | Lead beyond 5 Km and up to 10 km | MT | 65.00 | 217.69 | 14,149.85 |
| 86 | Lead beyond 10 Km and up to 20 km | MT | 65.00 | 272.25 | 17,696.25 |
| 87 | Lead beyond 100 Km and up to 150 Km | MT | 65.00 | 907.76 | 59,004.4 |
| 88 | Lead beyond 5 Km and up to 10 km | MT | 65.00 | 98.17 | 6,381.05 |
| 89 | Lead beyond 10 Km and up to 20 km | MT | 65.00 | 152.73 | 9,927.45 |
| 90 | Lead beyond 100 Km and up to 150 Km | MT | 65.00 | 788.23 | 51,234.95 |
| 91 | Extra for every Km per MT beyond 150 Km over item no. 172057 | MT-Km | 65.00 | 2.98 | 193.7 |
| 92 | From DMT - During period of traffic block | MT | 35.00 | 173.05 | 6,056.75 |
| 93 | From Truck / Trailer | MT | 65.00 | 86.59 | 5,628.35 |
| 94 | From DMT - During period of traffic block | MT | 35.00 | 219.92 | 7,697.2 |
| 95 | From Truck / Trailer | MT | 65.00 | 88.64 | 5,761.6 |
| 96 | For a lead up to 500m | Each | 65.00 | 72.27 | 4,697.55 |
| 97 | Extra to Item no. 172081 for additional lead of every 500m or part thereof beyond 500 m | Each | 65.00 | 48.37 | 3,144.05 |
| 98 | From DMT - During period of traffic block | MT | 35.00 | 219.92 | 7,697.2 |
| 99 | From Truck / Trailer | MT | 65.00 | 116.13 | 7,548.45 |
| 100 | Rails, switches, crossings, SEJ, Glued Joints, Check Rails etc. | MT | 200.00 | 388.3 | 77,660 |
| 101 | All type of PSC sleepers | MT | 135.00 | 424.83 | 57,352.05 |
| 102 | P.Way fittings of all types and other similar loose items | MT | 200.00 | 402.25 | 80,450 |
| 103 | Opening of level crossing up to required width from centre line of track for replacement of sleepers by digging of pucca road surface up to bottom of sleeper, removing of ballast, muck etc., screening of ballast & stacking the same near level crossing and disposing of all debris, replacing the required sleeper duly packing the sleeper to make fit for normal traffic and closing of LC surface with screened ballast to original level by proper ramming and consolidation to smooth motarable surface as directed by engineer in-charge. | Sqm | 135.00 | 381.94 | 51,561.9 |
| 104 | Level crossings with asphalted road surface | Sqm | 275.00 | 590.37 | 1,62,351.75 |
| 105 | Level crossings with concrete blocks road surface | Sqm | 275.00 | 536.25 | 1,47,468.75 |
| 106 | Cutting foot of rail by gas or any other approved method for check rails and grinding sharp edges into smooth profile. Payment shall be made for length of cutting of foot. | RM | 200.00 | 135.32 | 27,064 |
| 107 | Manufacture of flared portion of Guard Rail by cutting and bending to required shape & RDSO's approved drawings. Note: (1) Rails shall be supplied by Railways. (2) One set consists of two rails i.e. both left and right. | Set | 1.00 | 3,930.89 | 3,930.89 |
| 108 | Providing and fixing of flared portion of guard rails of any rail section over PSC sleepers including fixing of with all fittings, including leading of rails and fittings, squaring and adjusting spacing of sleepers as required, providing nose blocks duly cutting wooden blocks supplied by railways and fixing it with bolts of 16mm dia as directed complete and finished as per RDSO's approved drawing. Note: 1.One set consists of LH & RH side rails of one end. 2.Required P.Way fittings will be supplied at SSE stores depot. | Set | 1.00 | 3,821.15 | 3,821.15 |
| 109 | Drilling of 25mm to 40mm dia. holes in PSC sleepers with suitable rotary hammer / drilling machine at indicated location for fixing of guard rails on bridges & its approaches as per approved drawing and fixing of contractor's HDPE dowels and adhesive of approved quality to Drawing no. RDSO/T-3002, procured from RDSO's approved sources with contractor's materials and consumable. | Each | 135.00 | 270.05 | 36,456.75 |
| 110 | Caution Indicator Board of size 1400mmx400mm with back support frame fixed to vertical post of MS angle of size 50mmx50mmx6mm of 3650 mm long | Each | 100.00 | 5,540.12 | 5,54,012 |
| 111 | Speed Indicator Board of equilateral triangular shape having each side of 1000mm with back support frame fixed to vertical post of MS angle of size 50mmx50mmx6mm of 3650 mm long | Each | 100.00 | 4,791.62 | 4,79,162 |
| 112 | Stop Indicator Board of size 1400mmx400mm with back support frame fixed to vertical post of MS angle of size 50mmx50mmx6mm of 3650 mm long | Each | 65.00 | 5,540.12 | 3,60,107.8 |
| 113 | Termination Indicator Board of Circular shape having diameter of 1000mm with back support frame welded to vertical post of MS angle of size 50mmx50mmx6mm of 3950 mm long | Each | 65.00 | 6,611.39 | 4,29,740.35 |
| 114 | Manufacturing, supplying and fixing Curve Indicator / Point Indicator / SEJ Boards to be provided at various locations on formation, made out of MS sheet 2mm thick of size 450mm x 300mm duly fixed with MS frame of 25mm x 25mm x 3mm angle welded to 50mm x 50mm x 3mm MS angle, 1000mm long post split and bent 100mm at bottom end with all lead & lift as per specification and including painting of details with enamel paint, as directed by Engineer in-charge (Earthwork & concreting will be paid separately) | Each | 50.00 | 1,013.1 | 50,655 |
| 115 | Supply and fixing in position pre-cast cement concrete Fouling Mark as per approved drawing at station yard, duly painting the top surface and slopes with white enamel paint in two coats and inscribed letters with black of Fouling Mark, complete in all respects with all labour, materials including cement, tools and plants etc. | Each | 100.00 | 458.68 | 45,868 |
| 116 | Fixing vertically the unserviceable PSC sleepers at locations of tress-passing, railway boundary or to make temporary store by excavating trench, fixing PSC sleeper in trench and filling back open trench. | Each | 100.00 | 156.47 | 15,647 |
| 117 | Supplying and spraying in specified proportion Weedicide Chemical, capable to kill entire weed on track / cess / embankment with all labour, material, tools & plants etc. complete job in all respect. Scientific name of the chemical is Isopropylamine Salt of Glyphosate, in which active ingredient is Glyphosate (41%), colour is light amber to brownish, very low in toxicity and has favourable environmental characteristics. It will be ensured that no weed growth occurs up to six months period, otherwise re- spraying shall be done by the contractor free of cost. | Sqm | 995000.00 | 0.63 | 6,26,850 |
| 118 | JCB Backhoe Loaders 3DX Plus or similar with minimum 1.10 cum bucket capacity | Hour | 800.00 | 752.64 | 6,02,112 |
| 119 | Hydra or similar tyre mounted Pick-n-Carry crane of 12T capacity for misc. works of handling of material | Hour | 345.00 | 889.42 | 3,06,849.9 |
| 120 | Tractor with Trolley for local transportation or other misc. works. | Hour | 500.00 | 199.17 | 99,585 |
| 121 | Arranging labour as and when required by the Engineer in charge, for various works under SSE/P.Way, with contractor's T&P, equipments, hand signal flags, etc. as per specifications, special conditions and detailed scope of work as furnished in the tender and as directed by the Engineer in charge. Note: Item shall be operated with prior approval of concerned Sr. DEN / DEN in charge. | Day | 500.00 | 730.51 | 3,65,255 |
| 122 | Supply, filling and stacking of sand bags layer by layer filled with Railway Sand/railway quarry dust in Contractor's empty polythene cement bags of 50 kg bags with all contractors labour, tools, plants, lead, lift etc., including stitching the same with machine using polythene thread complete as directed by Engineer-in charge at site. | Each | 690.00 | 14.51 | 10,011.9 |
| Schedule total | ₹1,89,31,767.23 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Addlspl.trackcondtn.pdf
ATTACHMENT
Tender document
ATTACHMENT
95-2026-02P.waymisc.WUNWRR.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .