C.S.R.YOJNA KANPUR NAGAR ME BASIK SHIKSHA KE ANTARGAT HIGHER PRIMIRY SCHOOL MALTI STORY SAZARI,VIKASH KHAND-SADARBAJAR ME ASTRONOMY LABORATORY KA INSTALLATION WORK

Dismantling old or scerting racking out points and clearing the surface for plaster 1 including disposal of Unserviceable of rubishto the dumoping ground with in 50 meters Leads. D.S.R.No. 15.56

12 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1) 2 cement: 6 coarse sand) including cost of all material, labour, T&P etc. required for proper completion of work. DSR NO. 13.4.2

Removing White and colour wash by scrapping and sand papering and preapring the surface smooth including necessary repairs to scratches etc complete DSR No. 13.88

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR-13.80

Distempering with Ist quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour: 13.41.1

Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two 6 coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete 1 application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineerin- Charge. DSR 22.22A

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part 1) decorative type, core of block board construction with frame of 1st class hard wood 7 and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws DSR 9.20.1

Providing and fixing bright finished brass tower bolts (barrel type) withnecessary screws etc. complete:200x10 mm DSR 9.74.2

Providing and fixing bright finished brass door latch with necessary screwsetc. complete :300x16x5 aun DSR 9.75.1

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (copper oxidized as per IS: 1378) 300x16 mm DSR 9.62.1