SPECIAL REPAIR TO ROAD AND ROAD FURNITURE AT AFAC COIMBATORE

Amount

Material & Labour for scrarifying and picking gravelled , macadam or bituminous macadam surfaces in area not exceeding 400 sqm and depth not exceeding 50 mm, complete all as specified and as directed.

Material & Labour for 75 mm thick (compacted thickness) WBM, with coarse aggregate of grading 2 (63 to 40mm) or of grading 3 (50 to 20mm), rolled and consoidated to gradient and camber required with granite, trap or basalt. complete all as specified and as directed.

Preparing surface of unsurfaced water bound macadam by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc, complete all as specified and as directed.

Material & Labour for applying evenly a priming/tack coat with bitumen emulsion VG-10 @ 10Kg per10 Sqm water bound macadam top surfaces, complete all as specified and as directed.

Material & Labour for premix bituminous macadam, (consolidated thickness 75mm or less) by using 4% bitumen content using paving bitumen any panetration of grade VG-30 (confirming to IS-73-2006) laid, rolled and compacted to required gradient and camber using 8 to 10 tonne capacity power road roller laid with mechanical paver etc complete all as specified and directed.

Preparing surface of black top surfaces by burshes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc,complete all as specified and as directed.

Material & Labour for applying evenly a priming/tack coat with bitumen VG-10 @ 5 Kg per 10 Sqm using on black top surfaces, complete all as specified and as directed.

Material & Labour for bituminous premix semi dense asphaltic concrete 40mm consolidated thickness with 5.50% binder content (using bitumen grade VG-30) by weight of total mix, mixed in hot mix plant using design mix and laid with mechanical paver and rolled and compacted using 8 to 12 tonne capacity vibratory tandom power road roller to achive the required compactness to required camber and gradient complete including cutting edged of road straight and site clearance, all as specified and as directed.

Material and Labour for repairs to pot holes any depth, not exceeding 1 Sqm each including sweeping free from dust and mud, or water scoring sunken surfaces in roads, paths etc cutting around edges to at least 25 mm depth, making good by applying tack coat @ 5 kg /10 Sqm, putting in premixed bituminous mecadam, well rammed and sealed with binder(paving bitumen) 9.8 kg per/10 Sqm blinded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed mecadam, binder and chipping), depth of pot holes exceeding 30 mm, complete all as specified and directed.

Material and Labour for preparing bituminous surfaces of road and marking 2.5mm thick center lines,stop lines,dashes,arrows etc.and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

Supply and fix in solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery(1.2V/ 1600 MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc,all as specified and directed.

Supply and fixing in cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and including MS stud of suitable size as per manufactures instructions complete all as specified and directed.

S&F in repair 800mm dia of Convex Mirror made of PC Material provided with suitable stainless steel pipe post of 75mm dia as per site requirment. It is meant for road turning, intersections, curves, T-junctions, Hospital, Parking lots etc. It is also deal for surveilance. It should have clear & define mirror image having 130 degree of viewing angle. It is unbreakable & stronger than the glass and fixed on ground by PCC 1:2:4 as directed.

Supply & Fix in repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed

Material & Labour for Moorum/Soil filling in shoulders or pavings etc, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering as specified and directed.

Demolition of Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Material & Labour for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position (Size as specified) to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed

M&L for 100mm thick PCC (1:3:6) type C-2 (40 mm graded stone aggregate) as in sub-base, all as specified and directed

M&L for 100mm thick PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in floor/hard-standing/path finished even and smooth without using extra cement complete all as specified and directed

Material & Labour for Precast reinforced cement concrete 1:1.5:3 type A1 (using 20 mm graded stone aggregate) as in slab over Drain/ manhole cover set in CM 1:4 including fixing of Manhole cover frame where necessary all as specified and directed.

Material & Labour for MS TMT bars 10 mm dia and over as in reinforcement cut to length bent to shape required including bending, cranking and hooking ends and binding with and including MS Wire (annealed) not less than 0.90 mm dia complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description, complete all as specified and directed.

Supply & Fix Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, complete all as specified and directed.

Material & Labour for preparation of new painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying Two coats of synthetic enamel paint. over red oxide priming, complete all as specified and directed.

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft and loose soil, complete all as specified and directed.

Material & Labour for Machine pressed precast concrete rubber moulded interlocking paver block (With Grey cement and colour pigment) any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade all as specified and directed

Material & Labour for hardcore of gauge 12.5mm chips, deposited, spread and levelled in layers n exc. 15cm thick, watered, compacted and rammed to a true surface, complete all as specified and directed.

Removing soil/ building materials etc. to a distance of 100m or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination away from the defence land, complete all as specified and directed.

Vishnu Infrastructures (BID ID -3356348)

KSR AND COMPANY (BID ID -3348100)

SUPER COOL (BID ID -3348519)

p.chinnasamy (BID ID -3352639)