PROVN OF SPECIAL REPAIR IN BLDG NO P09 AND P10 Cook Houses AND PROVN OF WATER SUPPLY PIPE LINE FOR INTERCONNECTION OF 310 LAKH GLN RESERVIOR TO PUGLIA FILTER PLANT NO 3 AND ALLIED WORKS AT AGE BR II UNDER GE NORTH BIKANER MIL STATION

Amount

Demolition of Reinforced cement concrete of any description and in any position as directed and specified by engineer -in-charge

Demolition of cement conc. In any description and inc any position not otherwise specially provided complete all as specified and directed

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) →

Dismanting floor, hearth or wall tiling including cement mortar bedding and removal of rubbish out of the premises.

Taking down cement plaster on brick or stone walls, including raking out joints, hacking for key, scrubbing down with water etc.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) size n.exc 1.5 sqm each.

Taking down old rusted and damaged steel window /vents incl.guard bar and grill where exists of size not exc.1.5 sqm each all as spcd.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) size exc 1.5 sqm and n.exc 4 sqm each

Taking down shutters of any description n exc 1 Sqm each pane

Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each.

Taking up or down steel tubing 15 mm dia and connections and stacking neatly for offering credit.

All as per item N 11 but 20 mm dia.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frame or stone concrete or brick surrounds glazed with putty or fixed with beads.

M&L glass, pin head type, 4mm thick and glazing with oil putty in square n.exc 0.5 sqm in each pane.

S&F 1.25 mm thick Pressed steel frames of size 125mm x 60mm for single doors including necessary fixing lugs, hinges, lock strike plate, etc complete all as per IS provns.

S&F 1.25 mm thick Pressed steel frames of size 105mm x 60mm for single doors including necessary fixing lugs, hinges, lock strike plate, etc complete all as per IS provns.

S&F Second class hard wood plain, framed, panelled shutters 35mm thick, (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered partcile board medium density wood particle board with commercial faces venners supplied and fixed to chowkats.

S&F Second class hard wood, glazed and skelleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc without sash bar, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing gauze etc, size of members as directed supplied and fitted to chowkats

S&F Stainless steel wire cloth o.36mm nominal dia of wire and average width of aperature 1.40mm and fixed with stainless steel wire staples.

S&F in repair Stainless steel wire cloth o.36mm nominal dia of wire and average width of aperature 1.40mm and fixed with stainless steel wire staples.

S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube suppling & fixing in opening all as specified and as directd.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bttom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail, Panneling of plain color PVC sheet to be fitted in the MS frame welded /sealed to the stiles &rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site all as specfied and as directed.

S&F factory fabricated pressed steel frame/box windows, ventilators with glazed and fly proof shutters provided to size and dimension as specified & shown on drawing No BTD-888R Sheet No 1/5 to 5/5 & BTD-889 Sheet No 1/4 to 4/4 Or as directed by GE with & including MS grills, MS fillets, pintol hinges, tower bolts, MS handles, peg stays, MS lugs, locking arrangement, dash through bolt where required, etc complete all as specified and as directed. Notes: -(i) PCC for filling in frames, glass,wire gauge and painting shall be measured & paid in separately under respective items. Provision of all other items as shown & specified on drawings shall deemed to be include in provision of cutting holes of suitable depth in walls for inserting lugs etc and making good dismantled portion in PCC 1:2:4 type B-0 using 12.5 mm graded stone crushed stone aggregate and CM (1:3)

S&F Butt hings, 100 mm long, extructed aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21.

S&F Extruded aluminium alloy handles, 100 mm long, fabricated type anodised.

S&F Aluminium, anodised , 100 mm long, barrel tower bolts of extruded section and fixed

S&F 100 mm long, Butt hinges, stainless steel, ISI marked complete all as specified and as directed by Engineer-in-Charge.

S&F 250 mm long sliding door bolt, plate type, mild steel, stove enamelled black with bright bolt of not less than 12 mm dia with & including a minimum of six bolts and nuts, four on bolt plate and two on staple plate, ISI marked complete all as specified and as directed by Engineer-in-Charge.

S&F 150 mm long, mild steel, barrel tower bolt, stove enameled black with bright bolt, ISI marked complete all as specified and as directed by Engineer-in-Charge.

S&F 150 mm size mild steel, stove enamelled black, pressed handles, oval type, ISI marked complete all as specified and as directed by Engineer-in-Charge.

S&F Prelaminated partical board 18/19mm medium density ,prelaminated with both side with decorative choice laqmination and other side balancing with white lamination fixed with screws as in shelves to kitchen almirah and cub board fixed in repair.

S&F Hasp and staple 100mm aluminium anodised, safety type, with mild steel hinges pin including bolt to hinge plate and fixed with screws.

S&F Mild steel, 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete .

S&F Mild steel work as in hold fasts, clamps, bands, straps etc conforming to Fe 410-0

S&F in repair Sinks with drainage board made of stainless steel 1mm thick kitchen or laboutery with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460mm bowl size 410 mm 330 mm x 160mm

S&F curtain rods, 20mm dia mild steel, chromium plated including brackets, stops etc and fixed in repairs.

M&L Non skid coloured Ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors on 15mm thick screeding in CM 1:6. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete.

M&L Glazed ceremic tiles coloured 450X300mmX7mm/350x250x7 mm thick coloured,set and jointed in neat cement slurry and pointed in white cement or coloured to match colour matching with floor tiles as on vertical surfaces laid over 10mm thick cement screed in 1:4.

M and L for coloured Non skid ceramic tiles exceeding 0.11 sqm but not exceeding 0.18 sqm 7 to 8mm thick in floors set and jointed in neat cement slurry and pointed in coloured cement to match the floor laid over 15mm thick screed in cement mortar 1:4.

All as per item No 40 above but on vertical surface over 10 mm thick rendering in CM (1:4).

M and L for 20mm thick granite (of any type) work in steps, jambs,pillars, window cills, cooking platforms and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite as specified and as directed by enineer bin charge.

M & L PCC 25 mm thick 1:2:4 type B0 (12.50 mm graded aggregate) in any position in ground floor/roof complete all as specified and as directed by engr-in-charge.

M&L 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate finished even and smooth without using extra cement as in plinth protection laid in panels complete complete all as specifed and as directed by engineer in Charge.

S&F PVC (SWR) pipes 75 mm bore, single socketed, in any length with rubber ring jointed fixed to walls.

S&F PVC (SWR) pipes 110mm bore, single socketed, in any length with rubber ring jointed fixed to walls.

S&F PVC (SWR) branch piece, single (single Y) equal or unequal, 75mm bore.

S&F PVC (SWR) branch piece, single (single Y) equal or unequal 110mm bore.

S&F PVC (SWR) bends any radius 75mm bore

S&F PVC (SWR) bends any radius 110mm bore

S&F PVC (SWR) gully trap 125/110 mm setting and jointing with solvent cement.

S&F in repair 150 mm Floor door stoper of aluminium alloy and insulation and tounge, anodised with`hard steel spring in floor complete all as specified and as directed by Engineer-in-Charge.

M& L GI Tubing, medium grade galvanised, 15 mm bore with all fittings and fixed to walls and ceilings or laid in floors

Refixing old GI tubing with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified.

M& L GI Tubing , medium grade galvanised, 20 mm bore with all fittings and fixed to walls and ceilings or laid in floors.

Refixing old GI tubing with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified.

Dismantling Rotational Moulded plyethyelene water storage tank of capacity exc 250 lit but not exc 500 lit complete all as specified and as directed by Engineer-in-Charge.

M&L Rotational moulded polyethylene water storage tanks of capacity 500 litres, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc complete all as specified and as directed by Engineer-in-Charge. (Notes : (i) The water storage tanks shall be 2 layers, HDPE tanks moulded to seem-less perfection of rotational moulding process. The tanks shall be manufactured only from FDA approved special grade of polyethylene and shall be certified fit for potable water. (ii) The tanks shall be ISI marked. Also refer paras 18.60 and 18.60 A of MES Schedule Part-I. (iii) Payment for inlet, outlet and over flow pipes and ball valve shall be made separately. However cost of providing necessary GI fittings such as nipples with check nuts for inlet and outlet pipes, GI plug with check nut for over flow pipe and 30 cm long wash out pipe, GI 20mm nominal bore, medium grade and check nut for wash out pipes of size as per actual requirements and as directed by the Engineer-in-Charge shall be deemed to be included in the unit rate of this item.)

S&F Ball valve high pressure of PTMT with epoxy coated almn rod and high density plastic ball screwed for iron pipe and fixed fixed in repair.of 20mm Make : Prayag or equivalent.

Supply and fix in repair vitreous china wash hand basin flat back size 550 x 400mm including cutting for and pinning in ends of brackets or erecting stand etc complete fixed in repairs.

S & F in repair PVC valveless syphonic action type flushing cistern, 10 ltr capacity low level , white with inlet, ball valve, float and handle including brackets fixed in repairs.

S&F in repairPVC connections 15 mm size with PTMT nuts of length 450 mm

S&F in repair Stainless steel tubular towel rail, 20 mm dia D type 60cm long between flanges

M&L in repair Bib tap 15 mm dia, fancy type, cast copper alloy CP with crutch or butterfly handle, screwed down, screwed for iron pipe and fixed in repairs

M&L in repairPillar taps, 15mm dia, fancy type, cast copper alloy CP with capstan heads, chromium plated, screwed down high pressure, long screwed shanks and fly nuts, screwed for iron pipe and fixed in repairs.

S&F in repair angle valve cast copper alloy fancy type CP with long shank and cup and screwed for 15 mm iron pipe fixed as directed by Engineer in charge..

S&F in repair grating 75mm dia of stainless steel with and without hole having minimum weight 75 gm complete all as specified and directed by Engineer-in-Charge.

S&F 40 mm sink waste coupling for WHB sink with fixed in repair complete all as specified and as directed by Engineer-in-Charge.

S&F waste pipe 32 mm for WHB with fixed in repair complete all as specified and as directed by Engineer-in-Charge.

S&F 40 mm kitchen sink waste coupling for kitchen sink with fixed in repair complete all as specified and as directed by Engineer-in-Charge.

S&F pvc waste pipe 40 mm for kitchen sink with fixed in repair complete all as specified and as directed by Engineer-in-Charge.

M&L in repair Chromium plated soap dish complete all as specified and directed by Engineer-in-charge.

M&L Rendering 10 mm thick in CM 1:6 on other than fair faces of brick work or concrete surfaces finished fair and even as directed by engineer in charge.

M&L Rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished fair and even as directed by engineer in charge.

M&L Rendering 5mm thick on fair faces of conc. Surfaces in cement mortar 1:3,even and smooth w/o using extra cement as on ceiling.

M&L for preparing new surface of wood of any desc over 10cm width or girth and applying two coats of synthetic enamel paint .over pink primer as directed by engineer in charge.

S&F preparing new surface of steel of any desc over 10cm width or girth and applying two coats of synthetic enamel paint over red oxide as directed by engineer in charge.

M & L for preparation of old surfaces by complete removal of existing treatment of painted wall incl pillar etc by mechanical equipment like electric wall sander and applying two coat of exterior emulsion/ weather proof exterior grade paint of first quality by using over a coat of primer incl sealing the cracks all as specified in manufacturers instruction Make STP Ltd (Shallcry-215)/ Asian Paint (Apex Ultima)/ Berger Paint (Weather coat long) all as specified and directed by GE.

M & L for preparation of old surfaces by complete removal of existing treatment of painted wall incl pillar etc by mechanical equipment like electric wall sander and applying white wall care putty for filling the undulations as required and finished with two coat of exterior emulsion/ weather proof exterior grade paint of first quality by using over a coat of primer incl sealing the cracks all as specified in manufacturers instruction Make STP Ltd (Shallcry-215)/ Asian Paint (Apex Ultima)/ Berger Paint (Weather coat long) white/ tinted complete all as specified and as directed by Engr-in-Charge.

Dismantling strucural steel work including door gates but excluding framed truss etc

MS framed work as steel gates/chowkhats and other miscwork of angle or other section with gusset plates rails, braces etc complete driling for fixing of steel sheeting or other covering etc, confirming to Fe 290 Gde E-165 complete all as specified and as directed by Engineer-in-Charge.

M&L Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors

Dismantling of Roof tiles of any description or thickness in floor, apron etc laid, bedded and pointed in cement mortar complete all as specified and as directed by Engineer-in-Charge.

Demolition of lime concrete of any description over roof slab complete all as specified and as directed by Engineer-in-Charge..

S&F Preparing surface and cleaning of concrete slab by wire brushing and applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.20 Kg per sq m including cleaning surfaces complete all as specified and as directed by Engineer-in-Charge

M&LAPP based polymeric membrane minimum weight 3 kg/sqm and min 3 mm thick reinforced with polyster non wove fabric (wt not less than 150 grms/sqm) land on primed surface by forced application complete all as specified

M&L Lime concrete terracing as in roof complete all as specified and as directed by Engineer-in-Charge.NOTE:- For lime concrete, mudia kankar (source : NAL) and Kolayat coarse sand in lieu of brick aggregates and Surkhi respectively as specified in MES schedule Part-I shall be used.

M&L 40 mm thick brick tiles bedded on 10mm thick CM 1:6 and joints grouted flush in cement and sand mortar (1:3) mixed with 5% of crude oil by weight of cement complete all as specified and as directed by Engineer-in-Charge.

S&F in repair towel ring with material brass with glossy finish with fitting all as specified and as directed by engineer in charge.Charge Cat part No BA 41 of PRAYAG/JAINKO/SAKTI or Equivalent.

Dismantling of stone slab and tiles of any description or thickness in floor, apron etc laid bedded and pointed in any mortar as directed and specified by engineer in charge.

M&L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in filling in chowkats, hold fast block ,chanel drain ,cills, bed blocks , copings etc. complete all as specified and as directed by Engineer-in-Charge.

S&F Cup board knob mild steel 40mm dia complete all as specified and directed by Engr-In-Charge fixed in repair.

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised with flap of hinge ( when open 30 mm) .

M&L running welding in repairs with thickness of metal not exc 6 mm including provision for stopper of peg stay steel handle fitting complete all as specified and directed by Engineer-in-Charge.

M&L welding in repairs not exc 2.5 cm in length and not exc 6 mm thick of metal complete all as specified and directed by Engineer-in-Charge.

M&L 20-25 mm thick of size (50X50) cm approx single piece machine cut kota stone slab as in flooring/steps laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 20 mm thick screed bed in cement and sand mortar 1:4 complete all as specified and as directed by Engineer-in-Charge.

M&L 20-25 mm thick single piece machine cut kota stone slab on vertical surface and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15 mm thick C M 1:4 complete all as specified and as directed by Engineer-in-Charge.

Supply only liquid integral water proofing compound ISI Marked complete all as specified and as directed by Engineer-in-Charge.

Demolition of brick work built in cement mortar or cement lime mortar as specified and as directed by engineer in charge.

M&L Brick work with fly ash bricks old size straight or curved on plan exc 6 m mean radius built in cement mortar of 1:6 as specified and directed by engineer -in- charge.

M&L for Jodhpur stone slabs, self faced 10 cm thick, 25 to 35 cm wide, hoisted and set, jointed and grouted in cement mortar 1:3 as directed and specified by engineer in charge

Demolition of existing RCC chajja/ shelves of any size and description and S&F 40 mm to 50 mm sand stone slab in sunshades, chajjas, shelves, cills, landings, cover stone, templates etc n exc 2m in length , punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar 1:4 incl plastering all around in CM 1:4 completed all as specified.

S&F in replacement Vitreous china squatting pan of orissa pattern, white of size 580x440mm with integral foot rest and P or S trap in cluding provision of lime concrete bedding min 150mm thick (1:2:5) inc taking out old WC complete.

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as directed by Engineer in charge

Ditto, but 6mm to 8mm dia

Ditto, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binder.

M&L for M-25 Reinforced cement concrete for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like

M&L For M-25 Reinforced cement concrete for Beams, cantilevers, bressummers, lintels as specified and as directed by Engineer in charge.

Rendering 10 mm thick on fair faces of conc. Surfaces in cement mortar 1:3 with WPC on concrete slab when concrete is green.

S &F Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc as directed and specified by Engineer in charge.

S&F Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)

Preparation of newly plastered surfaces of wall including cornices, pillasters etc and applying two coats of distemper oil emulsion paint of approved tint or color over a coat of wall care putty complete all as specified and as directed by Engineer-in-Charge

M & L for preparation of old surfaces by complete removal of existing treatment of painted wall incl pillar etc by mechanical equipment like electric wall sander and applying white wall care putty for filling the undulations as required and finished with two coat of oil bound distemper white/ tinted complete all as specified and as directed by Engr-in-Charge.

S&F stainless steel Peg Set of six of standard size (not less than 300 mm long) fixed to wall with two rawl plugs and chromium plated brass screws completed all as specified and as directed by Engineer in charge.

M&L Painting to old wood or wood based surfaces of any description, not otherwise described over 10cm width or girth including preparation of surfaces finishing with one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

Painting to old steel or steel based surfaces of any description, not otherwise described over 10cm width or girth including preparation of surfaces finishing with one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in loose/soft soil complete.

M&L for Concrete bed to drain pipes _150__mm bore including packing under and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:4:8 type D2 using 40mm graded stone aggregate complete.

M&L for Salt glazed stoneware drain pipes _150__mm bore, grade ‘A’, laid in trenches and jointed as specified complete.

M&L for Salt glazed stoneware gully traps of size 150 mm x 150 mm, square or round mouthed, type ‘P’ complete.

M&L for Brick work with sub class ‘B’ old burnt brick , straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete.

M&L for Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete including sub base of floors complete.

M&L for 15mm thick Rendering in cement mortar 1: 4 on stone masonary or on other than fair faces of brick work or concrete surfaces, finished fair and even complete.

Providing precast reinforced cement concrete 1:2:4 type B-1 using 12.5 mm graded stone aggregate in cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary moulds and setting in cement mortar 1:4 complete (reinforcement to be measured separately)

Demolition and breaking up drain pipes (SGSW, AC or RCC) of internal dia 150mm, set in cement mortar complete.

Supply only liquid water proofing compound ISI marked.

Supply, Laying , jointing , testing and commissioning of DI pipe of size 350 mm bore with spigot and socketed ends DI class K-7 confirming to IS-8329/2000 (latest revision ) suitable for push on joint (rubber gaskets) duly ISI marked with confirming to IS: 5382 of bulb - Type-2 as per IS: 5382; Heel- Type-5, as per IS:5382, complete all as specified and directed by Engr-in-Charge. Make :- Electrosteel/ Jindal Note:- (i) Excavation & earth work shall be measured & paid for separately. (ii) Cost of rubber gasket joint deemed to be included in quoted rate.

Supply, Laying , jointing , testing and commissioning of DI pipe of size 250 mm bore with spigot and socketed ends DI class K-7 confirming to IS-8329/2000 (latest revision ) suitable for push on joint (rubber gaskets) duly ISI marked with confirming to IS: 5382 of bulb - Type-2 as per IS: 5382; Heel- Type-5, as per IS:5382, complete all as specified and directed by Engr-in-Charge. Make :- Electrosteel/ Jindal Note:- (i) Excavation & earth work shall be measured & paid for separately . (ii) Cost of rubber gasket joint deemed to be included in quoted rate.

Supply, Laying , jointing , testing and commissioning of DI pipe of size 150 mm bore with spigot and socketed ends DI class K-7 confirming to IS-8329/2000 (latest revision ) suitable for push on joint (rubber gaskets) duly ISI marked with confirming to IS: 5382 of bulb - Type-2 as per IS: 5382; Heel- Type-5, as per IS:5382, complete all as specified and directed by Engr-in-Charge. Make :- Electrosteel/ Jindal Note:- (i) Excavation & earth work shall be measured & paid for separately. (ii) Cost of rubber gasket joint deemed to be included in quoted rate.

Supply and fixing DI fittings as per IS 9523/2000 class K-12 with internal cement mortar lining and externally metallic zinc paint coating with finishing layer of butuman coating. The PN rating of the flanged fittingsshall be PN-10 upto 400mm bore such as bends (any type, radius & angle), Tapers any type (straight, bend, increasing, decreasing or double socket etc), Tee pieces, single branch, “Y” junction, double branch, cross (all sockets or socket & spigot), collars, caps & plugs suitable for spigot & socketed pipes, complete all as specified & directed.

Supply & fixing cast iron body sluice valve heavy duty class ‘PN-1.6’ of 350 mm bore, ISI marked with IS 14846, both flanged ends and drilled, high tensile stainless steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, complete with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, including dismantling & taking out old unserviceable CI sluice valve of 150 mm bore, complete, all as specified & directed. Make :- Zoloto/ Kirloskar/BIR

Supply & fixing cast iron body sluice valve heavy duty class ‘PN-1.6’ of 250 mm bore, ISI marked with IS 14846, both flanged ends and drilled, high tensile stainless steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, complete with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, including dismantling & taking out old unserviceable CI sluice valve of 150 mm bore, complete, all as specified & directed. Make :- Zoloto/ Kirloskar/BIR

Supply & fixing cast iron body sluice valve heavy duty class ‘PN-1.6’ of 150 mm bore, ISI marked with IS 14846, both flanged ends and drilled, high tensile stainless steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, complete with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, including dismantling & taking out old unserviceable CI sluice valve of 150 mm bore, complete, all as specified & directed. Make :- Zoloto/ Kirloskar/BIR

S&F 25 mm bore gate valve (ISI) marked) with iron wheel head, screwed both ends for iron pipe, including dismantling & taking out old unserviceable gate valve of 25 mm bore, complete , all as specified & directed. Make: Zeloto/Vinus/Leader

S&F 40 mm bore gate valve (ISI) marked) with iron wheel head, screwed both ends for iron pipe, including dismantling & taking out old unserviceable gate valve of 40 mm bore, complete , all as specified & directed. Make: Zeloto/Vinus/Leader

M&L for galvanised steel tubing medium grade of 25 mm bore (ISI marked) with & including all fitting laid in trenches complete all as specified and as directed. Make :- Jindal/Tata/Parkash surya

M&L for galvanised steel tubing medium grade of 40 mm bore (ISI marked) with & including all fitting laid in trenches complete all as specified and as directed. Make :- Jindal/Tata/Parkash surya

Material and labour for construction of brick masonary valve pit chamber of size 150x 150 x350 cm (Internal dimension) using sub class ‘B’ bricks complete, earth work, PCC (1:4:8) type D-2 using 40 mm graded stone aggregate in foundation,brick masanary with sub class bricks 23 cm build in cement mortor with 1:6 , plastering of 10 cm thickness internally and 15 cm externally(1:4) cement mortor and below grond level PCC with 1:2:4 type B2 using 20mm grade stone aggregate,coping 50 mm thick including frame of size 75x75x6mm made of angles iron and chamber cover made of MS sheet of 4 mm thickness double leaf including MS hinges locking arrangement with provision of locks and keys , painting of the steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer including necesarry excavation , returning & filling& removing of surplus soil etc complete all as specified and as directed by the Engineer in charge.

M&L for cutting opening in cement concerete wall with cutting through reinforcement ( any description) for refixing of water supply pipe of size 500/ 350/250 including trimming surfaces to receive rending etc and repair the same with matching surfaces and making leakproof with cement concerete and providing water compound after refixing the pipe and hole will be closed, complete specified and directedcted.

S&Fixing mild steel clamps made of flat iron 40x6 mm in two halves for tapping through 40 to 80 mm bore GI/DI water pipe line including drilling and welding of 15/20mm GI socket and necessary rubber insertion, nut bolts & washer,complete, all as specified & directed.

Supply and fixing of NRV CI flanged ends ISI marked ( IS - 5312) size 200 mm bore with rubber or fibre board gasket including necessary nuts, bolts and washer complete all as specified and directed . Make : KIRLOSKAR/BIR/Upadhaya

Excavating in trenches, not exc 1.5 metre wide and not exc 1.5 metre in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, laying cables, pipes, etc. not exc 10 Sqm on plan & not exc 1.5m in depth and getting out in soft/loose soil complete all as specified and as directed.

Excavating in trenches, not exc 1.5 metre wide and below exceeding 1.5 Mtr in depth upto 3.0 meter, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, laying pipes, etc. not exc 10 Sqm on plan complete all as specified and as directed.

Returning, filling in, including spreading, leveling watering and well ramming in layers not exc 25 cm thick in soft/loose soil complete all as specified and as directed.

Removing excavated soil/material to a distance not exc 50 metre and depositing where directed at a level not exc 1.50 metre above the starting point complete all as specified and as directed.

Taking down carefully DI/CI pipe line for refixing of size 500mm dia including all type DI fittings, sluice valve and valve chamber etc complete all as per specified and directed by Engr -in- Charge. Note : - Cost will be deemed labour and all types of T&P in quoted rate.

Refixing of DI/CI pipe line of size 500 mm dia in existing place but depth exceeding 1.5 meter including all type existing fitting,Sluice valve, rubber gasket joint complete all as specified and directed by Engr-in- Charge. Note : - (i) Excavation & earth work shall be measured & paid for separately . (ii) Cost will be deemed labour and all types of T&P in quoted rate.

M&L for cutting of existing DI/CI pipe line of size 500 mm dia for fixing of ' T' of size (500x500x350mm) including complete jointing materials (lead joint,spun yarn etc) all as specified and directed by Engr-in-Charge. Note:- (i) Excavation & earth work shall be measured & paid for separately . (ii) Cost will be deemed labour and all types of T&P in quoted rate. (iii) DI/CI fitting shall be measured & paid separately.

Taking down carefully (aluminium) point wiring complete of any type (batten/ surface conduit or concealed) for light point, fan point, bell point socket point or power point complete with all fitting such as switches, sockets pendants, ceiling rose, round block etc complete and making good disturbed surfaces of wall, floor or ceiling with plaster of tiles or roof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as spcified and directed.

Taking down submain wiring Aluminium/ copper of any size including earth continuity condutor on teak wood or conduit and removing from site and making good the disturbed surface of wall etc complete all as specified and directed.

Taking down old U/S existing DB TPN 4 way and DB SPN 8 way including MCB/MCCB of any capacity and any size and removing from site and making good the disturbed surface of wall etc complete all as specified and as directed.

M & L for point wiring with and including single core FRLSH PVC insulated and unsheathed stranded copper conductor cable of size 1.5 sqmm 1100 volts grade drawn through and including suitable size of PVC concealed conduit with accessories with laminated top cover fixed on GI sunken box with cover plate for housing of switch, socket, regulator etc complete with and including 1.5 sqmm FRLSH PVC insulated and unsheathed stranded copper conductor cable as earth wire and connected to common earth dolly and making good to the disturbed surfaces of wall, floor, ceiling etc to match with exisiting surface complete all as specified and as directed by Engr-in-Charge for the following :- (a) One Light/fan/ex-fan point controlled by one switch.

(b) One 3 pin 5 amps socket on independent board.

all as per item No 4 above but with 4 sqmm copper wire for 3 pin socket outlet 15 Amp on independent board complete and all as directed by Engr-in-charge.

S&F switch Modular type, 6 Amp, 1 module single pole one way, 230 Volts, Modular type complete all as specified and as directed by Engr- in -charge.

S&F switch Modular type, 16 Amp, 1 module single pole one way, 230 Volts, Modular type complete all as specified and as directed by Engr- in -charge.

M&L socket outlet 3 Pin 6 Amps modular type, 2/3 pin combined 2 module 230 Volts complete all as specified and directed by Engr-in-Charge.

M&L socket outlet 3 Pin 6/16 Amps modular type, 2/3 pin combined 2 module 230 Volts complete all as specified and directed by Engr-in-Charge.

S&F ceiling rose, surface backelite , three terminal AC, 230 volt complete all as specified.

supply and fixing fan step regulator modular type,120W -2 module electronic socket type five step controlled 230V AC 50 Hz for complete all as specified and directed by Engr-In-Charge.

Removing and re-fixing tube light fitting, 1x 20-22 watts, 230 volt, basic all purpose surface and wall mounted led batten with polycarbonate housing & integrated electronic driver, pre-wired and fixed on walls with all fixing accessories such as screws, clips etc and connecting up with two core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed by Engr-in-charge. 20W

M & L Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings

S&F sheet metal enclosure MCB DB, double door, vertical TPN 4 way with 200 Amps rated busbar all as specified and as directed. Make:- Hegar/Legrand/Seimens

S & F double door, sheet metal enclosure, powder coated for MCB DB SPN 8 way fitted with neutral link, earth bar , din rail and 200 amps rated bus bar 230 volt conforming to IS 13032-1991 complete all as specified and as directed by Engr-in-charge.

S & F MCB SPN, 5-32 Amps, 240 volts, breaking capacity 16KA complete all as specified and as dircted by Engr-in-charge.

S & F MCB SP, 5-32 Amps , 240 volts, breaking capacity 10KA complete all as specified and as dircted by Engr-in-charge.

S&F MCCB 63 amps, 4 pole, 415 volts, fixed type breaking capacity 16KA complete all as specified and as directed by Engr-in-charge.

M&L for submain wiring using 4 runs of single core FRLS PVC insulated, unsheathed stranded copper conductor cable of size 2 runs of 6 Sqmm of voltage rating 1100V for three phase & neutral, drawn in and including concealed PVC conduit of dia not less than 25 mm dia with standard acessories, along with two run of FRLS PVC insulated, unsheathed, stranded copper conductor of size 2x 6.0 Sqmm as earth continuity conductor all as specified and directed(Note-4 runs of single core FRLS PVC cable 6sqmm for three phase & neutral with Two run of earth conductor as earth and conduit shall be measured as one unit)

Taking down Exhaust fan,sealing cable end,dismantling blades and removing fan and blades & refixing Exhaust fan of any make, any sweep , keeping side in store in safe custody for painting of Exhaust fan complete,in situ with synthetic enamel paint byspraying including filling cavities with filler,one coat after cleaning all dust and reassembling the fan complete including writing MES No at the site.

Taking down fan,sealing cable end,dismantling blades and removing fan and blades & refixing ceiling fan of any make, any sweep , keeping side in store in safe custody for painting of ceiling fan complete,in situ with synthetic enamel paint by spraying including filling cavities with filler,one coat after cleaning all dust and reassembling the fan complete including writing MES No.

M&L for Earthing complete with galvanized steel earth plate electrode 60cm x60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.5 meters below normal ground level connecting to the galvanised earth lead wire 4.0 mm dia by means of bolts, nuts check nuts and washers of galvanized iron and steel earth wire protected by provision of GI mediumgrade pipe 15mm bore including provision of concrete pit made with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4Kg/Sqm) and frame of angle iron 40x 40x6 mm and handle of 6mm dia MS bar made to shape, GI light grade 20mm bore pipe for watering perforated at bottom, 1.75meter long placed on top edge of earth plate, common salt & charcoal filling with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returing filling in and removal of surplus soil to a distance not exceeding 50 meters all as per electrical plate No -5 of SSR 2009 Part-I and connecting to Lighting protection earth test points all as specifed and directed including testing on completion.

Excavation in trenches n. exc 1.5 m in depth and not exc 1.5 m width for laying of cable lines etc and getting out in hard/ dense soil complete all as specified.

Supply and laying Sand coarse dry as in cushioning of under ground electric cable in trenches, laid to a uniform thickness of 23 cm (15 cm under the cable & 8 cm over the cable) and gently punned down to 18 cm thickness all complete as specified and as directed.

Supply and laying bricks (old size) for cable protection by using common burnt clay building bricks, sub-class ‘B’ designation 75 laid dry flat across length of the cable with width of the trenches equal to length of bricks and all as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25sq mm 4 core complete all as specified and directed.

S&F GI tubing light grade 40mm dia for protection of cable on pole/ wall etc complete all as specified and as directed by Engr in charge.

M/S BUDHRAM BISHNOI

BIDAWAT ENTERPRISES