Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹10.2 LAccepted-AOC 58 3 JUTOGH CANTT SHIMLA 08 HP | SHIMLA | HIMACHAL PRADESH | 171001 | 1 | Accepted-AOC BEING LOWEST | |
| 2 | 2₹12.0 L+₹1.8 L (17.5%)Rejected-Finance | 2 | Rejected-Finance BEING NOT LOWEST | |
| 3 | 3₹14.2 L+₹4.0 L (39.1%)Rejected-Finance | 3 | Rejected-Finance BEING NOT LOWEST |
Tender Value
₹11.8 L
EMD Value
₹23,500
Closing Date
27 Apr 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 863 EWS
GE 863 EWS C/O 56 APO
PROVISION OF LPG STORE FOR QM STORE OF 2136 FD HOSP AT KARCHAM IN THE AREA OF AGE BR I POOH UNDER GE 863 EWS
2022_MES_498770_3
GE863/EWS-T-71 OF 2021-22
Open Tender
Civil Works
Item Rate
180 days
KARCHAM
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE 863 EWS
₹23,500
Yes
2 Jun 2022
6 Apr 2022
29 Apr 2022
6 Apr 2022
27 Apr 2022
13 Apr 2022
60 days
Amount
Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in hard / dense soil complete all as specified and directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed.
M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation, filling in mass concrete etc., complete all as specified and directed.
M & L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 , complete , all as specified and directed.
M &L for precast cement concrete, type C1 (1:3:6), using 20mm graded stone aggregate as in block masonry with solid blocks, exc 10cm in width and setting in cement mortar 1:6 , complete all as specified and directed.
M&L precast PCC (1:3:6), type C1 , using 20mm graded stone agg as in bond stone set in cement mortar 1:6 , complete all as specified and directed by Engr-in-Charge.
M&L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.
M&L for removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point, complete, all as specified and directed.
M & L for 40 mm thick Cement Concrete M-15 Nominal Mix (using 12.5 mm graded stone aggregate) as in damp proof course (DPC) to horizontal or vertical surfaces including necessary form work and mixing of water proofing compound as per manufacturer’s instructions complete all as specified and directed. NOTE: - water proofing compound will be measured and paid separately.
Supply only integral water proofing compound of approved brand/make.
M&L for Hard core of gauge n exc 63mm thick of broken boulder spread leveling watering ramming to true surface complete all as specified and directed
M&L for 75 mm thick PCC 1:4:8 type D-2 ( using 40 mm graded stone aggregate) in sub base of floor complete all as specified and directed
M & L for 40 mm thick PCC 1:2:4 type B-1, using 20mm graded stone aggregate as in surface of flooring , finishing surface even and smooth without using extra cement ,complete, all as specified and directed.
M&L for 50 mm thick Cement concrete 1:3:6 type C1, (using 20 mm graded stone aggregate), as in plinth protection, finishing cement concrete surface fair and even without using extra cement laid in alternate panels complete all as specified and directed.
S&F Fe 410-W(Gde E-250) quality-A Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete all as specified and directed
S&F steel ventolators with top hung shutter including projecting type hinges, steel peg stay ,complete all as specified and directed.
M & L for rendering 10mm thick on faces of brick or concrete surfaces in cement plaster 1:4 and finished even and smooth (without using extra cement) complete all as specified and directed.
M & L for rendering 15 mm thick on faces of brick or concrete surfaces in cement plaster 1:4 and finished even and smooth (without using extra cement) complete all as specified and directed.
M&L Reinforced cement concrete , M-30 design mix (using 20 mm graded stone aggregate) in Columns, pillars, piers, posts and struts etc., complete all as specified and directed.
M&L Reinforced cement concrete M-30 design mix (20 mm graded stone aggregate) in Beams, cantilevers, bressummers complete all as specified and directed.
M & L for formwork to sides of concrete foundations, footings, bases od columns , raft and raft beams , sides and soffits of foundation and plinth beams and similar work vertical or better for rough finished surfaces of concrete complete all as specified and directed.
M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, bands, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete complete all as specified and directed.
M&L Form work to pillars, posts, struts, piers, columns and stachions with rough finished, square, rectangular or polygonal concrete surfaces complete all as specified and directed.
M & L Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for rough finished complete all as specified and directed.
M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed
M & L for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
M&L for PCC(1:3:6) type C-1 using 20 mm graded stone aggregate as in coping finished even and fair without using extra cement complete all as speicified and directed.
S & F Mild steel roof trusses (framed), Trusses, purlins, crane grantries, rails and framings and heavy bracket framing (Beam,tee, angle, channel or flat sections) confrming to Fe 410-W including cleats,distance pieces etc comforming to Fe 410 W, grade 250, quality A, complete all as specified and directed.
S & F Fe - 410W Gde E-250 Quality A , for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment including welding etc all as specified and directed.
M&L Mild steel screw bolts (machine made) with hexogonal are square heads at one end and screwed the other are screwed both ends each screwed both end to be fitted with washres and one hexoagonal are square nuts exc 5 cm but n.exc 10cm long, diameter of neck exc 11 mm but n.exc 15 mm complete all as specified and directed
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S & F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F mild steel work as in posts and struts in fencing, wind ties for roof including securing bolts, including cutting tops to shaps as directed, drilling holes, notching for wire, etc ; flat iron fillets (for securing wire mesh etc) embedded in concrete/mosnary complete duly tar painted and sanded the embedded portion of angle iron including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed
M&L for Preparation of new wall surface, and applying three coat of White wash complete all as specififed and directed.
M & L for preparing newly plastered or previously untreated walls surfaces and applying two coats of cement base paint over one coat of primer , complete all as specified and directed.
M & L for preparation of new or previously untreated surfaces of steel of any description , over 10 cm in width or girth not otherwise described applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer, complete all as specified and directed.
S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specfied and directed.
Excavating in Hard / dense soil as in post holes (or similar holes ) each not exceeding 0.5 cu. m. getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus spoil to a distance n. exc 50 m and making good surface complete all as specified and directed.
M&L for PCC 1:3:6 , type C-2 using 40mm graded stone aggregate as in foundation, filling in mass concrete etc complete all as specified and directed.
Supply and fix Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins etc, complete all as specified and directed
Fixing only chain link fencing incl line wires, any mesh, size and type to any type of standards, rails, straining blots, etc. including provision of binding wire. complete all as specified and directed.
Supply only Chain link MS Galvanized fencing, any size or type complete all as specified and directed
M&L Mild steel round bars 10 mm dia, and over cut to length, bent to shape required, including with screwewd ends, nuts, washers and mild steel plates conforming to Fe - 290 Gde E-165 all as specified and directed.
M&L for machine pressed precast interlocking paver block any shape and size conforming to IS -15658-2006 of 80mm thickness M-40 Gde with grey cement and pigment over and including 25mm thick sand cushioning complete all as directed.
M&L PCC type B-1 1:2:4 using 20 mm graded aggregate in kerbs etc., complete , all as specified and directed.
M&L for Copper strip 20 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground all as specified and directed.
M&L for Air termination, single pointed, copper rod 12mm dia and 300mm long complete all as specified and directed.
S&F of MS Box made out of 2 mm thick MS Sheet and size 150 mm x 150 mm x 100 mm for housing the test point incl provn of 2 mm thick hylam sheet on bottom for housing the test point all as directed.
Material & labour for earthling complete with copper earth plate electrode 600x600x3.15mm thick buried directly in ground. ( earth pit not less than 2.25 mtr depth below ground level at any type of strata ) with top edge of the earth plate not less than 1.5mtr below normal ground level connected by copper earth strip 20x3mm as earth lead by means of brass nuts and bolts, thimbles check nuts, washers all as shown in electrical plate No 3 of MES SSR Part-1(2009) and specified including and provision of copper strip upto 7.5 mtrs long with 40 mm dia, light grade GI pipe protection and watering pipe of GI 20 mm bore, medium grade, including all excavation and earth work and connecting the earthing strip to panel, including testing on completion complete all as specified and directed. Note:- Cost of charcoal & salt as per site reqmt is deemed to be included in quoted rate.
M & L for Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw all as specified and directed.
ANAND BUILDERS AND SUPPLIERS
Pankaj Builders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .