AS AND AS TO WEATHER PROOF PAINTING AT NORA BUILDING B13t o B18 C1 to C6 C7 to C12 C13 to C18 AND B5 P 90 AND B6 P91 BUILDING OF SAILORS MARRIED ACCN AT INS RAJALI ARAKKONAM

Amount

Taking down cement plaster on brick works or concrete surface including raking out joints, hacking for key, scrubbing down with water, etc.

M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in two layers 10mm thick in CM 1:4 followed by 5mm thick CM 1:4 with approved WPC, finished even and fair.

M&L for applying high performance two component flexible acrylic Polymer cementitious waterproofing coating by two coats using 2kg/sqm in two coats having elongation of 150% after cleaning of surface and treating all surface cracks filled with cementitious non shrink grout at all surface patchwork defects with high early strength high performance rapid setting concrete, sealing bore packing joint with cementitious non shrink Grout all complete as per manufacturers specifications.

Integral waterproofing compound

M & L for complete removal of existing treatment from old decorated plastered surfaces by Vacuum based sanding machine, removal of nails etc & filling cracks/hole with putty as required (Multipurpose mixer shall be used for uniform and propper mixing of putty) and applying two coats of emulsion weather coat white/coloured over a coat of exterior water proof primer by auto roller upto 26 mtr height (G+5storey bldg) as per site requirement complete all as specified and directed as per manufacturer instruction. Note: 1) The Quoted rate is inclusive of making scaffolding, trestles, ladders, cradles, necessary for execution of work and protective measures etc... for a height upto 26 mtr height approximately. (G+5 storey bldg). 2) Columns, Beams and Chajja to be painted different colour as per direction of Engr-in-Charge

M&L for complete removal of existing treatment from old decorated plastered surfaces by Vacuum based sanding machine, removal of nails etc & filling cracks/hole with putty and applying wall care putty upto 1mm thick as required (Multipurpose mixer shall be used for uniform and propper mixing of putty) and applying two coats of emulsion weather coat white/coloured over a coat of exterior primer by auto roller for upto 10 mtr height as per site requirement complete all as specified and directed as per manufacturer instruction. Note:1) All work shall be carried out by approved applicator of paint manufacture only. The same shall be approved before carrying out the work from GE. 2) Contractor should submit Auth applicator certificate before execution of work. 3) Contractor should submit warrenty certificate for 5 years from manufacturer. 4) Columns, Beams and Chajja to be painted different colour as per direction of Engr-in-Charge

All as per Item No-5 above, but for newly plasterd surfaces etc…

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in with CM 1:6 complete all as specified.

Material , labour and prepared existing concrete surface by brush and application two component solvent-free epoxy resin on existing concrete surface, maximum coverage area 3.5-4.00 Sqm per litre complete all as specified and directed.(Any storey/ height of building/ structure)

M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in two layers 10mm thick in CM 1:4 followed by 5mm thick CM 1:4 with approved WPC, finished even and fair.( WPC shall be measured and paid separately).

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified.

M&L precast cement concrete louvres and jallies type B0 1:2:4 (12.5mm graded aggregate), 75mm thick (measured solid), including all mould- ings but excluding frame set in cement mortar 1:4 complete all as specified and as directed

M & L for preparation of newly plastered surfaces and applying wall care putty upto 1mm thick as required (Multipurpose mixer shall be used for uniform and propper mixing of putty) and applying two coats of emulsion weather coat white/coloured over a coat of exterior primer by auto roller for upto 10 mtr height as per site requirement complete all as specified and directed as per manufacturer instruction. Note:1) All work shall be carried out by approved applicator of paint manufacture only. The same shall be approved before carrying out the work from GE. 2) Contractor should submit Auth applicator certificate before execution of work. 3) Contractor should submit warrenty certificate for 5 years from manufacturer. 4) Columns, Beams and Chajja to be painted different colour as per direction of Engr-in-Charge

Material and labour for one coat of synthetic enamel painting on old painted wooden surfaces of any description, not otherwise described over 10cm width or girth including preparation complete all as specified and as directed by Engr-in-charge.

All as per Item No.15 here-in-before but on old painted steel surfaces.

Taking up or down 20mm steel tubing and connections, including cleaning for refixing or removal to store.

Taking up or down 32mm steel tubing and connections, including cleaning for refixing or removal to store.

Refixing 20 mm old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed

Refixing 32 mm old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed

S & F 20 mm dia Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors

S&F 32mm Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories).

S&F 110mm PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls.

All as per item No 24 but except pipes

S&F 75mm PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls.

All as per item No 26 but except pipes

S&F 110mm PVC (SWR) bends any radius

S&F 75mm PVC (SWR) bends any radius

S&F 110mm PVC (SWR) branch piece, single (single Y) equal or unequal

S&F 75mm PVC (SWR) branch piece, single (single Y) equal or unequal.

Dismantling wrought iron or mild steel work of any description complete all as specified and as directed by Engr-in-charge.

S & F mild steel work as in Hand rails of spiral stair case, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165

Liquid waterproofing compound

M & L two coats of epoxy paint over a coat of epoxy primer on new steel surfaces of any description over 10 cm width or girth including necessary preparation of surfaces all as specified and as directed.

R.P.TRADERS

SUSII CONSTRUCTIONS

Banyan Engineers and Contractors

SIVA ENTERPRISES

M B JAYAVEL

PSK Enterprises

BALA BUILDERS

NLK Construction