PROVN OF COVERED PATHWAYS FROM BUILDING NO. P-44 (OPS) TO T-140 (ADM BUILDING) AT AIR FORCE STN AT NATHATOP UNDER GE (AF) UDHAMPUR.

Amount

Surface excavation n.exc 30 cm deep and averaging 15 cm depth and getting out hard and dense soil, complete all as specified and as directed .

Rough excavation not exceeding 1.5 m deep and getting out in hard and dense soil complete all as specified and as directed.

Rough excavation not exceeding 1.5 m deep and getting out in hard rock complete all as specified and as directed.

Excavating trenches not exceeding 1.5 m wide or not exceeding 10 sq m on plan and not exceeding 1.5 m in depth for foundation and getting out hard/dense soil complete all as specified and as directed

Excavating trenches not exceeding 1.5 m wide or not exceeding 10 sq m on plan and not exceeding 1.5 m in depth for foundation and getting out hard rock complete all as specified and as directed

M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation filling complete all as specified and as directed .

M&L for Brick work with sub-class 'B' bricks designation 75 old size, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick , including watering ,ramming complete all as specified and as directed .

Removing of soil to distance n.exc 50 mtr and depositing at a level n.exc 1.5 mtr above the starting point complete all as specified and as directed .

Removing of rock to distance n.exc 50 mtr and depositing at a level n.exc 1.5 mtr above the starting point complete all as specified and as directed .

M&L for Reinforced Cement Concrete M-30 Design Mix (using 20 mm graded crushed stone aggregate) as in foundation , plinth beams , footing , under reamed piles , bases for columns and mass concrete complete all as specified and as directed .

M&L for Reinforced Cement concrete M-30 Design Mix (using 20 mm graded crushed stone aggregate) as in RCC column etc, complete all as specified and as directed .

M&L RCC M-30 Design Mix (using 20 mm graded crushed stone aggregate) as in RCC Beam / lintel over 1.50 m span etc, complete all as specified and as directed .

Use & waste of form work to the side of Footing of column and plinth beam complete all as specified and as directed .

Use and waste of form work to the side of RCC column incl finish the surface even and fair complete all as specified and as directed .

Use and waste of form work as in sides and soffit of floor or roof beams , beam haunchings girder s , bressummers , lintels , cantilevers , shelves moulding supports , overhangs etc also splays between floor and beams etc complete all as specified and as directed .

M&L TMT bar 10 mm dia and over cut to length, bent to shape as required and binding with MS wire n.less than 0.9 mm dia annealed complete all as specified and as directed .

All as per above item No.17 above but 5 to 10 mm dia as in stirrups complete all as specified and as directed .

M&L for 15 mm thick rendering in two layers (10mm + 5mm) on fair faces of brick/concrete or stone surfaces in CM 1:4 and finished even and smooth without using extra cement complete with water proofing compound all as specified (WPC shall be measured separtely).

Supply only Liquid water proofing compound ccomplete all as specified and as directed.

M&L for 10 mm thick rendering on fair faces of brick /concrete surfaces in CM 1:6 and finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new plastered surfaces and applying three coats of white wash on wall surfaces complete all as specified.

M&L for preparation of new plastered surfaces on walls and applying two coats of cement based paint over a coat of primer in approved camouflage pattern complete all as specified and as directed.

M&L for hardcore with broken stone or boulders n.exc 63 mm gauge , deposited , spread in layer n.exc 15 cm thick , watering and ramming to a true surface complete all as specified and as directed.

M&L for 100 mm thick cement concrete 1:4:8 type D2 (using 40 mm graded crushed stone aggregate) as in subbase of floor complete all as specified & as directed.

M&L for cement concrete 1:2:4 type B-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling mass concrete complete all as specified & as directed.

M&L for machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 50 mm thickness, M-30 Grade with grey cement and pigment complete all as specified & as directed.

M&L for 40 mm thick sand (cushioning) filling under floors including watering and consolidation complete all as specified and as directed.

M&L for Plain cement concrete 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in coping including weathering, slightly rounded or chamfered angles and kerb including necessary form work complete all as specified and directed.

M&L for 75 mm thick plain cement concrete 1:3:6 type C-1 ( using 20 mm graded crushed stone aggregate ) as in flooring / plinth protection laid in alternative bays and joints shall be filled up with bituminous gola with 80/25 bitumen ( 1 part of bitumen to be mixed with 3 part of sand ) including finish the surface even and smooth without using extra cement, complete all as specified and as directed.

S&F plates (plain or chequered ) as per IS-3502 ( Base IS-10748 Gr-II ) square or rectangular cut or notched (ordinary and counter shunk ) forming holes , without any attachment etc, complete all as specified and as directed .

S&F mild steel roof truss ( framed ) , trussed , purlins , crane gantries , rails and fastenings and heavy bracket framing ( beam , tee , angle , channel or flat sections ) including distance pieces , cleats conforming to Fe 410-W ( Gde -E-250 ) quality-A complete all as specified and as directed .

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut of 11 to 15 mm dia and exceeding 15 cm and n.exceeding 22.5 cm long complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel surface exc 10 cm width or girth complete all as specified and as directed .

M&L for applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel surface n.exc 10 cm width or girth complete all as specified and as directed .

S & F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screw or L type or J type hook complete all as specified and directed.

S&F Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strenght of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw or L type or J type hook complete all as specified and directed .

M&L for small articles such as clamp , hold fast , wall ties /wind ties , support of valley gutters , support or stays fo rain water , ventilating pipes , including bolts if required etc made of MS flat iron conforming to Fe-290 W (Gde E-165) complete all as specified and as directed .

Use and waste of form work to the side of PCC steps including fair finish surfaces complete all as specified and as directed .

S&F mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc, complete, drilled for fixing of sheeting or other covering, doors, etc, to be prepared for hanging or sliding with and includiing either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other convering, running rails and guides) and hanging,MS handle & sliding door bolt, also fastening and fixing confirming to Fe-410-W (Grade E-250) quality-A , complete all as specified.

S&F Plain, black, mild steel sheeting, 1.25mm thick in steel gate and straight flashings surface, complete all as specified and as directed .

S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed.

M&L for Framed work as in grills with ends of bars shoulders or framed guard bars and similar work conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

M&L for PCC 1:3:6 type C-1 (using 20 mm graded aggregate) as in fixing of hold fast complete all as specified and as directed .

Supply only 25 mm thick pre-formed filler board for expension joint complete all as specified and as directed.

S&F 0.80 mm thick PGI sheet fixed with screw/bolts complete all as specified and as directed.

Point wiring using approved colour coding as per IS for one light/bell/buzzer point controlled by one switch or one fan point controlled by one switch & fan regulator with PVC insulated, unsheathed FRLS multi stranded copper conductor 1.5 sqmm (nominal area) 1100 volt grade cable for phase & neutral drawn through concealed conduits, with new modular sunken boxes and suitable size of frame, cover for mounting switch, socket and regulator fixed on surface in touch with wall including 1.5 sqmm (nominal area) copper conductor PVC insulated, unsheathed, multi stranded FRLS cable as earth wire and connected to earth dolly complete all as specified and as directed including cutting chases to wall and making good the disturbed surfaces to match with the specifications complete all as specified.

M&L for Switch Piano,flush type single pole,oneway 6 Amps conforming to IS-3854 omplete all as speciifed and as directed

M&L for Ceiling rose, surface bakelite 65 x 50mm, two to three terminals complete all as specified and as directed.

M&L for Sub main wiring using approved colour coding as per IS with two single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 4.00 sqmm (nominal area) 1100 volts grade and one single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 4.00 sqmm (nominal area) 1100 volts grade cable as earth wire including suitable size of PVC conduit drawn through rigid concealed conduit, heavey duty and connected to main board and making good disturbed surface complete all as specified and as directed. Note: Two runs each of 4.00 sqmm main cable and one RM of 4.00 sqmm cable as earth wire together alongwith conduit shall be considered as 1 running metre for payment purpose.

M&L Sheet metal enclosures for DBs SPN 8 way with 200Amps rated busbar including accessories therein and disposing off complete all as specified and directed.

M&L MCB SPN 40 Amps, 240 Volts, having breaking capacity 10 kA, 'C' characterstic complete all as specified and as directed.

M&L for MCB SP 6-32 Amps, 240 Volts, having breaking capacity 10 kA, 'C' characterstic complete all as specified and as directed.

M&L for MCB TPN 40-63 Amps, 240 Volts, having breaking capacity 10 kA, 'C' characterstic complete all as specified and as directed.

S&F indoor decorative 20 Watt LED Light fitting four feet PVC batten housing LED batten type luminaire high efficiency electronic driver, (lumen output not less than 2000 lumen), power factor more than 0.9 colour temperature not less than 6000K, LED driver with PVC insulated copper conductor complete all as specified..

Supply and fixing LED street lights fitting 35W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose and including suitable size bricket complete all as specifeied and as direectd in charge.

Earthing complete with Galvanised steel earth plate electrode of size 60 cm x 60 cm x 3.15 mm thick as earth burried directly in ground (earth pit not less than 2.25 Meter deep below ground level) with top edge of the earth plate not less than 1.5mtr below ground level using GI earth lead wire 4.0 mm dia as earth continuity conductor connected to earth plate by means of copper thimbles, nuts, bolts, washers including jointing of earth electrode and earth wire by means of welding, all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and pit cover made of MS sheet 10 mm thick duly fixed to angle iron frame with hinges of appropriate size by welding and having locking arrangement, adequate quantity of charcoal dust and salt all around the earth plate, earth work in any type of soil , removing surplus excavated material all as required at site and as specified in EP No 3 of MES SSR Part-I (2009) directed by Engineer-in-charge including testing on completion.

Supply and fixing of Earth continuity conductor or main 4 mm Galvanised iron wire fixed to wall on battenor recess or chases including or drawn in conduit/pipe or fixed to poles or any other indicatedsituation for loop earthing etc. Complete all as specified and as directed

Earthing complete with Galvanised steel earth plate electrode of size 60 cm x 60 cm x 3.15 mm thick as earth burried directly in ground (earth pit not less than 2.25 Meter deep below ground level) with top edge of the earth plate not less than 1.5mtr below ground level using GI earthstrip 25 x 4mm dia as earth continuity conductor connected to earth plate by means of copper thimbles, nuts, bolts, washers including jointing of earth electrode and earth wire by means of welding, all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and pit cover made of MS sheet 10 mm thick duly fixed to angle iron frame with hinges of appropriate size by welding and having locking arrangement, adequate quantity of charcoal dust and salt all around the earth plate, earth work in any type of soil , removing surplus excavated material all as required at site and as specified in EP No 3 of MES SSR Part-I (2009) directed by Engineer-in-charge including testing on completion.

Supply and fixing of Earth continuity stirip 25x4 mm Galvanised iron strip fixed to wall on battenor recess or chases including or drawn in conduit/pipe or fixed to poles or any other indicatedsituation for loop earthing etc, complete all as specified and as directed

Supply laying & testing cable XLPE insulated screened PVC bedded,galvanized steel strip or wire armoured,electric power cable (heavy duty) with stranded aluminium conductor,1100 Volts grade of size 4.0 core 16 sqmm complete all as specified and as directed

M&L of VTPN Vertical three phase distribution board, VTPN, 8 way 440 volts having IP-54 isolated busbar assembly IK 09 Mechnical impact strength door earthing protection, double door with provision for fixing of MCCBs as incomer up to 125 Amps and MCBs as outgoing complete all as specified and as directed .

Supply and fix of MCCB 4P 100 Amps /415Volts , 16 KA having breaking capacity with complete accessories as per existing suitable size complete all as specified and as directed

M & L for Weather proof outdoor bus bar chamber, made out of 3.15 mm thick MS sheet comprising 4 Nos aluminium strips each of 200 Amps, 60 cm long duly insulated mounted on insulators including one no incoming MCCB 125amps 25 KA 415 volts and one out going MCCB100 Amp, 16 KA 415 volts complete with all accessories, 4 No's mounting legs made out of 25 mm x 25 mm x 6mm angle iron grouted in PCC block of size 30 cm x30cm x 90 cm (30 CM depth below ground level and 60 cm above ground level) in cement concrete 1:3:6, type C-2 (Using 40 mm grade crushed stone aggregate), and connections with size of aluminium thimbles, nuts, bolts & washers including cable glands at entry and outlet points including excavation and earth work returning filling and removal of surplus soils, bus bar chamber complete all as specified and directed by Engr-in-Charge.

M/S ASHOK KUMAR PACHIALA (BID ID -3131070)

M/s Khajuria Construction Co. (BID ID -3137444)

MAHADEV ENTERPRISES (BID ID -3143574)

s l sharma and sons (BID ID -3143814)