SPECIAL REPAIR OF BLDG NO T-05 AND ALLIED EXTERNAL SERVICES AT TRG AREA, PROVN OF MAIN GATE AT (JCOS/OR MD ACCN SADILAPUR) AND PROVN OF 04 X GARBAGE BINS FOR IWT UNDER GE GUWAHATI

Amount

Dismantling of asbestos cement (corrugated, semicorrugated) etc sheets in roof covering complete all directed.

Taking down roof trusses, coupled rafters or trussed beams, clear span Above 4 metres & upto 8 metres complete all as directed

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in concrete and making good disturbed ground complete all as directed

Dismantling timber fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section, in any position from unframed work complete all as directed.

Dismantling of Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets and scantaling all as directed.

Demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing complete all directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc. complete all as directed.

M&L Brickwork with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed

M&L for 15mm thick rendering with cement mortar (1:4) on fair faces of brick work in two layers (10mm & 5mm) seperately mixed with water proofing compound in top layer as per manufacturer's instructions and finishing the surface even and fair without using extra cement complete all as specified and as directed. Note:- WPC shall be measured and paid seperately under appropiate item.

Supply only liquid water proofing compound complete all as specified and as directed.

M&L Rendering 10 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6 for finished even and fair without using extra cement complete all as specified and as directed.

M&L preperation of new plastered surfaces of wall and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed.

M&L preperation of new plastered surfaces of wall, applying plaster of paris putty of 1.5 mm thickness over plastered surface to prepare the surface even and smooth including priming and Finishing the surfaces with two coats of Distempering 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification complete all as specified and as directed

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated/semi corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as complete all as specified and as directed..

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 including necessary preperation of surfaces and applying one shop coat of red oxide, zinc chrome primer complete all as specified and as directed.

S&F rolled mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachmentas conforming to Fe 290 Gde E-165 including necessary preperation of surfaces and applying one shop coat of red oxide, zinc chrome primer complete all as specified and as directed.

S&F, Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm and not exc 10cm long, dia of neck 11-15mm complete all as specified and as directed.

M&L for preparing new Steel surfaces of any description, not otherwise describe over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 Sqm each. complete all as directed.

Taking down chowkat with shutter without taking off shutter from the frame exc 1.5 Sqm n.exc 4 Sqm each complete all as specified and as directed.

S&F Pressed steel frames of size 125mm x 60mm, made our of 1.25mm thick pressed out of cold rolled mild steel sheets, for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed

S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sidescomplete all as specified and directed.

S&F Factory made second class hardwood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplescomplete all as specified and as directed.

S&F 150mm long Aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and as directed.

S&F 300mm aluminium alloy sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy fixed complete all as specified and as directed.

S&F 100mm size Butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and as directed.

S&F 150mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F in repair, 300mm, ordinary rat tail rod pattern springs including roller and roller plate completecomplete all as specified and as directed.

M&L preparing new wooden surfaces of any description, not otherwise describe over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F in repair 18/19mm thick Prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations, fixed with screws to timber frame work complete all as specified and as directed.

S&F 30mm width of flaps (when open) Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.

S&F 100mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F Colour coated Anodised aluminium frame for windows, ventilators, with one or more rebates including joining cleat for fixing etc. complete all as specified and directed Note:- Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed

S&F Colour coated anodised aluminium windows/ventilators any type including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, along with standard locking arrangements, handles, tower bolts, hinges etc as required. complete all as specified and directed Note:- (i) Labour charges for fixing of glass/wire guage/aluminum grills is inclusive in the unit rate quoted. Glass/Wire Guage/aluminum grills shall be measured and paid seperately at supply only rates (ii) Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed

Supply only 4mm thick frosted sheet glass on one side, ordinary quality fixed with Aluminum frame work n. exc 0.5 sqm in each pane complete all as specified and as directed.

M&L for RCC M25 design Mix (20mm graded aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

M&L formwork to soffits to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc., finished fair complete all as specified and directed.

M&L TMT Bars 10mm dia and Over, cut to length, bent to shape as required including Cranking, Bending, Hooking Ends and binding with Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.

M&L TMT Bars 5mm dia and over upto and including 10mm dia as in Stirrups, Spacers etc. cut to length, bent to shape required including cranking, bending, hooking ends and binding with Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.

S&F Anodised aluminium snap grid frame work for false ceiling (Size of grid 605 x 605mm) complete all as specified and as directed.

M&L 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to GI/Aluminium framework with screws complete all as specified and as directed.

Demoliation Cement concrete (unreinforced) Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all asdirected.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L Hardcore, broken stone or boulders, of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surfacecomplete all as specified and directed.

M&L Cement Concrete1:3:6 Type C-2(using 40mm graded aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L 75mm thick cement concrete (1:3:6) type C-2( using 40mm graded crushed stone aggregate) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and as directed.

M&L providing plain cement concrete type C-1, (1:3:6), (using 20 mm graded stone aggregate), as in copings, bed block for filing hollow space of steel chowkhats, fixing of hold fast, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.

M&L Vitrified Ceramic tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer in cement moryar (1:6) complete all as specified and as directed.

M&L Coloured glazed ceramic tiles 300 x 450 x 7 mm thick in vertical surfaces and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing with cement moryar (1:4) complete all as specified and as directed.

M&L Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set & jointed in net cement slurry and pointed in white or coloured cement to match shade of tiles including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and as directed.

Solid PVC Double door frame of size 50mm x 95mm made out of 5mm wood grain printed PVC sheet PVC sheet reinforced with M.S.tube, suppling & fixing in opening as per specification & drawing as specified in SSR Part I, Section 8 complete all as specified and as directed.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with wood free EPS fixing in frame at site as per specification & drawing as specified in SSR Part I, Section 8 complete all as specified and as directed.

S&F 125mm long Aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and as directed.

S&F 15mm bore GI pipe medium grade water tube with all fittings laid in floors fixed to walls and ceilings or laid in floors, including necessary taking down of exsisting old pipe complete all as specified and as directed.

S&F 20mm bore GI pipe medium grade water tube with all fittings laid in floors fixed to walls and ceilings or laid in floors, including necessary taking down of exsisting old pipe complete all as specified and as directed.

S&F in repair, single piece-WC with PP soft close seat cover , Hinges, Fixing accessories set and accessories set, Cistern fitting, Size:360x640x685mm, P trap-180mm all as specified and as directed.

S&F in repair, Wall mixer 3-in-1 system with provision fot both hand shower and over head shower complete with 115mm long bend pipe, connection legs, wall flange (without hand and overhead shower) complete all as specified and as directed

S&F Hand shower 32mm round shape straight design dual flow (ABS Body and face plate chrome plated) with rubit cleaning system with easy flexible tube in chrome finish 1.5 meter long with nuts complete all as specified and as directed

S&F in repair, 125mm Brass chromium plated shower rose with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed.

S&F in repair, 15mm angular stop cock with wall flange complete all as specified and as directed.

S&F in repair, vitreous China pedestal wash basin, white, flat back, size 550x400mm including brackets including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and as directed.

S&F in repair 15mm bore pillar taps, cast copper alloy with capston heads, chromium plated, fancy type, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed

S&F in repair 15mm bore Bib taps, fancy type, chromimum plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F 32mm Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete as in waste pipe etc. complete all as specified and as directed

S&F in repairs,15mm bore PVC Connection with PTMT nut of length 450 mm complete all as specified and directed

S&F in repair 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F 110mm bore UPVC (SWR) pipes, single socketed, in any length, with rubber rings, fixed to walls including dismantling/taking out existing unserviceable pipe complete all as specified and directed

S&F 110mm bore UPVC (SWR) pipes, single socketed, in any length, with rubber rings, laid in trenches including dismantling/taking out existing unserviceable pipe complete all as specified and directed

S&F in repair,110mm bore UPVC (SWR) bends any radius complete all as specified and as directed.

S&F in repair, 110mm bore UPVC (SWR) vent cowl any radius complete all as specified and as directed.

S&F decorative stainless curtain rod of wooden finish 20mm dia thickness not less than 0.75mm, fixed with curtain rod holder fixed in walls with screws and finials caps with 6 Nos of curtain ring per RM complete all as specified and directed. Note: Curtain rod holder and finials caps will be measured and paid seperately at Supply only rates)

Supply only decorative stainless curtain holding braket suitable for holiding 20mm curtain rod heavy duty complete all as specified and directed.

Supply only decorative stainless steel finial end cap suitable for curtain rod of 20mm dia as approved complete all as specified and directed.

S&F in repair, brass chromimum plated Soap dish of size 160mm x 160mm x 90mm fixed to plugs with chromium plated brass screws complete all as specified and as directed.

S&F in repair Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F in repair 600x450mm bevelled edge mirror of selcted quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified complete all as specified and as directed

M&L Post construction Anti Termite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and as directed.

M&L Post construction Anti Termite Treatment Treatment of soil under existing floors using emulsion @ one litre per hole,300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1cement: 2 coarse sand) to match the existing floors complete all as specified and as directed.

Surface excavation in soft/loose soil, n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out complete all as specified and as directed.

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for column & wall foundation, laying of UG Cable/pipe, and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n exc 25 cm layers in soft/loose soil complete all as specified and directed.

Removing excavated material (Soil) not exceeding 50 metre and depositing where directed at a level not exceeding 1.50 metre above the starting point complete all as specified and directed.

M&L PCC (1:4:8) type-D2 with using 40 mm graded crushed stone aggregate as in mass concrete for base etc complete all as specified and as directed.

M&L preperation of new surfaces of wall and applying three coats of white wash complete all as specified and as directed.

M&L 100mm thick Cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base to floors finished fair and even complete all as specified and directed.

S&F mild steel conforming to Fe.290.Gde-E-165 Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work including necessary preperation of surfaces and applying one shop coat of red oxide, zinc chrome primer complete all as specified and as directed.

S&F 1.25mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required ncluding necessary preperation of surfaces and applying one shop coat of red oxide, zinc chrome primer complete all as specified and as directed.

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe 290 Gde E-165 including necessary preperation of surfaces and applying one shop coat of red oxide, zinc chrome primer complete all as specified and as directed.

M&L Rendering 10 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:3 for finished even and smooth without using extra cement complete all as specified and as directed.

M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, roughed finished surfaces, complete all as specified and as directed.

M&L RCC M25 design Mix (20mm graded aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M&L Formwork to sides of pillar post, struts, pier, column and stanchions, square, rectangular or polygonal, roughed finished surfaces, complete all as specified and as directed.

M&L for RCC M25 design Mix (20mm graded aggregate) as in Columns, pillars, piers, posts and struts complete all as specified and as directed.

S&F mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; and similar work, hung as gates including pintle hinges, stops, hand made sliding bolts,with ornamental and intricate design conforming to Fe.290.Gde-E-165 including necessary preperation of surfaces and applying one shop coat of red oxide, zinc chrome primer complete all as specified and as directed.

M&L for 18-20mm thick Granite (of any type) tiles machine cut, in skirting/dado laid over and including 15mm thick backing layer in cement mortar 1:4 and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed.

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, with grey cement and pigment complete all as specified and as directed.

M&L glazed ceramic designer tiles 600 x 300 x 7-8 mm thick in vertical surfaces and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing with cement moryar (1:4) complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials from site and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.

M&L for concealed point wiring with two single core 1.5 Sq.mm size FRLSH multistranded copper conductor PVC insulated cables and one single core 1.5 Sq.mm size green FRLSH colour PVC insulated,multistranded copper conductor PVC cable as earth continuity conductor,1100 volts grade, complete drawn in and including 20mm(minimim) medium grade rigid PVC CONDUIT and conduit accessories i.e. joint boxes, terminal boxes for mounting or housing switches, socket outlets, fan regulators, etc. confirming to IS specifications, including provision of flush modular mounting boxes, with back plate and cover plate of appropriate size & thickness for mounting switch, sockets etc. with including cutting chases for conduits & sinkings for MS Sunken boxes & making good to walls, floors etc. complete all as specified & as directed for the following :- Item continued as 103 to 105

One light/fan point controlled by one one way switch

One 3 pin socket outlet 5 amps on the same board with other switches

One 3 pin socket outlet, 5 amps, on independent board

M&L for concealed point wiring for one socket out let 15/16 amps point on the independent board with two single core 2.5 Sq.mm size FRLSH multistranded copper conductor PVC insulated cables and one single core 2.5 Sq.mm size green FRLSH colour PVC insulated,multistranded copper conductor PVC cable as earth continuity conductor,1100 volts grade, complete drawn in and including 20mm(minimim) medium grade rigid PVC CONDUIT and conduit accessories i.e. joint boxes, terminal boxes for mounting or housing switches, socket outlets, etc. confirming to IS specifications, including provision of flush modular mounting boxes, with back plate and cover plate of appropriate size & thickness for mounting switch, sockets etc. with including cutting chases for conduits & sinkings for MS Sunken boxes & making good to walls, floors etc.complete all as specified & as directed

S&F Modular switch, one way, 10 Amp, 1 Module, 240 volt, ISI marked complete all as specified and as directed.

S & F Modular shuttered socket outlet 5 Pin, 6 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed.

S&F Modular switch, one way, 16 Amp, 1 Module, 240 volt, ISI marked complete all as specified and as directed.

S & F Modular shuttered socket outlet 6 Pin, 6/16 Amp, 2 Module, 240 volts, ISI marked ISI marked complete all as specified and as directed.

S&F Modular type fan regulator step type120Watt (05 steps) for energy saving fans, 2 Module, ISI marked complete all as specified and as directed.

S&Fceiling rose, 3 phase/PVC/ polycarbonate, isolated body, three terminals, complete all as specified and as directed.

S&F Lamp holder PVC polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

S&F call bell ding dong type AC Single pole 220/240 Volts, surface type complete all as specified and directed.

S&F Modular bell push with indicator, one way, 6 Amp, 1 Module, 230 volt, ISI marked complete all as specified and directed.

S&F LED lights fitting 1x 20 Watt, (or next nearer higher watt) 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S&F LED luminaire 600 mm x 600 mm, 18 watt, 220 Volts, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

M&L concealed sub-main wiring alongwith earth wire of size of 2 x 6.0 sq. mm + 1 x 6.0 sq. mm earth wire, ISI marked, FRLSH, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including PVC rigid conduit (medium grade) of 20mm dia (Medium Grade) with all fittings and accessories ISI marked including taking out old unserviceable submain wiring and making good to walls, floors etc as per existing specifications complete all as specified and directed. Notes;- (i) 2 Runs of 6Sqmm main cable and 1Run of 6Sqmm earth wire along with 1 Run of PVC conduit with acessories shall be measured as one unit length (ii) Rate is deemed to be inclusive cutting chases and making good the distrubed surfaces of wall etc (iii) Loop length as required and as directed deemed to be included in the UNIT RATE QUOTED.

M&L concealed sub-main wiring alongwith earth wire of size of 2 x 4.0 sq. mm + 1 x 4.0 sq. mm earth wire, ISI marked, FRLSH, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including PVC rigid conduit (medium grade) of 20mm dia (Medium Grade) with all fittings and accessories ISI marked including taking out old unserviceable submain wiring and making good to walls, floors etc as per existing specifications complete all as specified and directed. Notes;- (i) 2 Runs of 4Sqmm main cable and 1Run of 4Sqmm earth wire along with 1 Run of PVC conduit with acessories shall be measured as one unit length (ii) Rate is deemed to be inclusive cutting chases and making good the distrubed surfaces of wall etc (iii) Loop length as required and as directed deemed to be included in the UNIT RATE QUOTED.

S&F in repair, Sheet metal enclosure for 4 way VPTN Distribution Boards (DB’s), IP-43 double door, with 200 amps rated bus bar, suitable for hosing MCCB as incommer and MCB's as outgoing including blanking plates as required and flush to wall surface complete all as specified and directed. Note : Incomming MCCB and Outgoing MCBs measured and paid seperately under relevant item

S&F MCCB, 4 Pole, 63 Amps, 415 volts, 16 KA complete all as specified and as directed.

S&F MCB Single pole, 6 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete as specified and as directed..

S&F in repair, sheet metal encloser Plug and socket for suitable for 20 Amps SPN with and including 20 Amps MCB and flush to wall surface complete all as specified and directed. .

S&F energy saving & environment friendly long life 36 Watt,(or nearest next higher wattage) CT ≥ 5700 K, LED building security light made up of pressure die-cast aluminium housing with acrylic cover as diffuser with IP 66 protection & impact resistance not less than IK-07 complete with integrated type, with high efficiency electronic driver, surge suppressor of 5 KV or more & high brightness LEDs, luminaire efficacy > 110 lumens/Watt, power factor ≥ 0.90, operating range 140 to 270 V, 50 Hz complete and connecting up with and including three core twisted flexible copper conductor cable of suitable size all as specified & as directed.

S&F bracket suitable for fixing of security light fitting made out from 32mm bore GI pipe, medium grade 1.5 metre in length, made to shape as required, fixed to pole with MS flat iron clamp of size 25x4mm duly welded, bent to shape and making holes etc including preperation of surfaces and applying a coat of zinc chrome red oxide primer over MS flat iron surfaces complete including necessary nuts, bolts & washer etc as required and as specified and directed.

S&F in repair, exhaust fan steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers and connecting up complete and provision of cable 3 core of size 0.75 Sqmm from ceiling rose to fan complete all as specified and as directed.

M&L earthing with GI earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground vertically to depth not less than 2.25m below the ground level with top edge of earth plate at a depth not less than 1.5m below the ground level connected to galvanized iron strip 25x4mm earth lead by means of bolts & nuts,check nuts & washers made of galvanised steel, earth strip protected by and including PCC (1:2:4) type B1 precast RCC cover slab (1:2:4, 20mm graded aggregate)reinforced with 8mm dia TMT bars 100mm center to center bothways including one handle made of 10 mm dia round bar, including necessary excavation and earthwork in any type of soil, 20 mm dia medium grade galvanized steel tube for watering with one end fixed with cast iron funnel and wire mesh, 32 mm bore medium grade galvanized steel tubing for drawing earth lead GI strip protection & common salt, charcoal in alternate layers etc. complete all as shown in EP No 3 of SSR Part 1 and testing on completion complete all as directed

M/S Kangkans

M/S SHIVAYA ENGINEERING