Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.7 CrAdmitted-Finance HOUSE NO 101 SEC 20 PART II HUDA SIRSA | ₹2.7 Cr | L1 | Admitted-Finance |
| 2 | L2₹2.7 Cr+₹50,703.39 (0.19%)Admitted-Finance | ₹2.7 Cr+₹50,703.39 (0.19%) | L2 | Admitted-Finance |
| 3 | L3₹2.8 Cr+₹11.0 L (4.05%)Admitted-Finance D 55 HAKIKAT RAI RD ADARSH NAGAR DELHI 33 | ₹2.8 Cr+₹11.0 L (4.05%) | L3 | Admitted-Finance |
| 4 | L4₹2.9 Cr+₹13.5 L (4.93%)Admitted-Finance | ₹2.9 Cr+₹13.5 L (4.93%) | L4 | Admitted-Finance |
| 5 | L5₹2.9 Cr+₹16.7 L (6.10%)Admitted-Finance | ₹2.9 Cr+₹16.7 L (6.10%) | L5 | Admitted-Finance |
| Sl No | Description | Qty | Unit | Garg Construction Co. L3 | M/s Ramesh Chander Contractor Co. P. Ltd. L6 | M/s Lord Shiva construction Co. L4 | M/s.S.D.N.R.CONSTRUCTION COMPANY L1 | MAHENDER SINGH CONTRACTOR L8 | Jimmi Kumar Contractor L2 | Nirmal Singh contractor L5 | yashpal setia contractor L7 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | [11.5.3]12 mm cement plaster of mix : 3. 1:4 (1 cement: 4 fine sand) | 174.72 | Sqm | 80 ₹13,977.6 | 50 ₹8,736 Lowest | 60 ₹10,483.2 | 75 ₹13,104 | 80 ₹13,977.6 | 87 ₹15,200.64 | 69 ₹12,055.68 | 50 ₹8,736 Lowest |
| 2.00 | [11.78]Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade. | 174.72 | Sqm | 25 ₹4,368 | 20 ₹3,494.4 | 15 ₹2,620.8 Lowest | 25 ₹4,368 | 35 ₹6,115.2 | 37 ₹6,464.64 | 29 ₹5,066.88 | 30 ₹5,241.6 |
| 3.00 | [17.26.2]Tack Coat 2. Providing and applying tack coat with penetration grade bitumen VG - 10 using bitumen pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous/ granular surface cleaned with mechanical broom as per technical clause 503 of MORT&H specifications | 1,86,225 | Sqm | 8 ₹14,89,800 | 8 ₹14,89,800 | 10 ₹18,62,250 | 11 ₹20,48,475 | 10 ₹18,62,250 | 7 ₹13,03,575 Lowest | 8.5 ₹15,82,912.5 | 8 ₹14,89,800 |
| 4.00 | [17.33.1]Open - Graded Premix Surfacing 20 mm thickness 1. Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of crushed stone aggregates of specified grading premixed in a continuous type of hot mix plant of appropriate capacity not less not less than 75 tonne per hour, with bituminous binder VG - 10 @ 1.46 kg per sqm, laid with Paver Finisher Mechanical and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades complete as per technical clause 510 of MORT&H specifications. | 1,86,225 | Sqm | 97.77 ₹1,82,07,218.25 | 98 ₹1,82,50,050 | 90 ₹1,67,60,250 | 88 ₹1,63,87,800 Lowest | 100 ₹1,86,22,500 | 95 ₹1,76,91,375 | 91 ₹1,69,46,475 | 100 ₹1,86,22,500 |
| 5.00 | [17.36.3]Seal Coat 3. Type B with VG - 10 bituminous binder
Providing and laying of premix sand seal coat premixed in continuous type HMP of appropriate capacity not less than 75 tonnes/ hours using specified fine aggregates and penetration grade bitumen @0.68 kg/sqm laid to specified levels, grade and cross fall complete as per technical clause 511 of MORT&H specifications. | 1,86,225 | Sqm | 29.87 ₹55,62,540.75 | 35 ₹65,17,875 | 35 ₹65,17,875 | 32 ₹59,59,200 | 35 ₹65,17,875 | 27 ₹50,28,075 Lowest | 39 ₹72,62,775 | 35 ₹65,17,875 |
| 6.00 | [17.6]Construction of Embankment with Material obtained from Borrow pits NA Construction of Embankment CBR 8% (for new road/ raising/ berms/ etc.) with approved material obtained from borrow pits, including compensation of earth with all lead and lift transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2, as per technical clause 305 of MORT&H specifications. | 9,315 | cum | 75 ₹6,98,625 | 50 ₹4,65,750 Lowest | 90 ₹8,38,350 | 82 ₹7,63,830 | 120 ₹11,17,800 | 77 ₹7,17,255 | 59 ₹5,49,585 | 70 ₹6,52,050 |
| 7.00 | [34.12.2]Advance Direction sign board 900x900 square as per IRC 67- 2012 with retro reflective Sheeting as per ASTM D 4956 09 and as per IRC 67 2012 fixed over 4 mm thick aluminium Composite material (ACM) sheeting having aluminium skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on a square hollow steel section post 60x60x3.2mm conforming to IS 4923 without cost of definition plate firmly fixed to ground in foundation concrete M-25 of size 0.45x0.45x0.75m for vertical post complete as per clause 801 of MORTandH specifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting and a certified copy of test reports from an independent test laboratory including three year outdoor weathering test report for sheeting tested in India condition conforming to clause 6.7 of IRC 67-2012 2. Using high intensity Microprisomatic grade retro reflective Sheeting Class B as per IRC 67 2012 | 2 | Each | 3,000 ₹6,000 | 6,500 ₹13,000 | 6,500 ₹13,000 | 5,080 ₹10,160 | 6,500 ₹13,000 | 7,777 ₹15,554 | 2,999 ₹5,998 Lowest | 7,000 ₹14,000 |
| 8.00 | [34.19.2]Hazard Marker sign board 300x900mm rectangular as per IRC 67- 2012 with retro reflective Sheeting as per ASTM D 4956 09 and IRC 67 2012, fixed over 4mm thick Aluminium Composite Material (ACM) sheeting having skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on a square hollow steel section post 60x60x3.2mm conforming to IS 4923 firmly fixed to ground including foundation concrete M-25 of size 0.45x0.45x0.60m for vertical post complete as per clause 801 of MORTandH specifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting and a certified copy of test reports from an independent test laboratory including three year outdoor weathering test report for sheeting tested in India condition conforming to clause 6.7 of IRC 67- 2012. 2. Using high intensity Microprismatic grade retro reflective Sheeting Class B as per IRC 67 2012 | 60 | Each | 1,500 ₹90,000 | 2,216 ₹1,32,960 | 2,000 ₹1,20,000 | 1,900 ₹1,14,000 | 2,400 ₹1,44,000 | 2,577 ₹1,54,620 | 1,399 ₹83,940 Lowest | 1,500 ₹90,000 |
| 9.00 | [34.26]Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including Reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. | 8,160 | Sqm | 275 ₹22,44,000 | 280 ₹22,84,800 | 300 ₹24,48,000 | 235 ₹19,17,600 Lowest | 400 ₹32,64,000 | 287 ₹23,41,920 | 299 ₹24,39,840 | 300 ₹24,48,000 |
| 10.00 | [7.21.1]Brick work with common burnt clay non-modular bricks of class designation 10.5 in foundation and plinth in: 1. Cement mortar 1:4 (1 cement : 4 coarse sand) | 22.53 | cum | 3,697 ₹83,293.41 | 3,000 ₹67,590 | 3,000 ₹67,590 | 3,390 ₹76,376.7 | 3,500 ₹78,855 | 3,177 ₹71,577.81 | 3,199 ₹72,073.47 | 2,500 ₹56,325 Lowest |
Tender Value
₹3.9 Cr
EMD Value
₹7.8 L
Closing Date
24 Jul 2024, 5:00 pmClosed
KAMALDEEP SINGH RANA
PD - I, Sirsa
special repair by way of 20 mm thick Premix Carpet on 2 nos. roads in Kalanwali Constituency (i) Kalanwali to Baragudha (VT) (Road ID 5689) in km. 0.00 to 2.25, 2.55 to 15.21 (ii) Baragudha to Rori Road (VT) (Road ID 5686) in km. 0.00 to 18.84 in Sir
2024_HRY_390312_1
202451E7554C 94E1 4182 8227 F13D82E152EF632BAR
Open Tender
Civil Works
Works
90 days
BADA GUDHA BADA GUDHA
special repair by way of 20 mm thick Premix Carpet on 2 nos. roads in Kalanwali Constituency (i) Kalanwali to Baragudha (VT) (Road ID 5689) in km. 0.00 to 2.25, 2.55 to 15.21 (ii) Baragudha to Rori Road (VT) (Road ID 5686) in km. 0.00 to 18.84 in Sir
2 documents required · 2 mandatory
₹15,000
₹7.8 L
Yes
E.E. Office PD1 Sirsa
17 Aug 2024
13 Jul 2024
25 Jul 2024
13 Jul 2024
24 Jul 2024
13 Jul 2024
19 Jul 2024
Amount
[11.5.3]12 mm cement plaster of mix : 3. 1:4 (1 cement: 4 fine sand)
[11.78]Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade.
[17.26.2]Tack Coat 2. Providing and applying tack coat with penetration grade bitumen VG - 10 using bitumen pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous/ granular surface cleaned with mechanical broom as per technical clause 503 of MORT&H specifications
[17.33.1]Open - Graded Premix Surfacing 20 mm thickness 1. Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of crushed stone aggregates of specified grading premixed in a continuous type of hot mix plant of appropriate capacity not less not less than 75 tonne per hour, with bituminous binder VG - 10 @ 1.46 kg per sqm, laid with Paver Finisher Mechanical and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades complete as per technical clause 510 of MORT&H specifications.
[17.36.3]Seal Coat 3. Type B with VG - 10 bituminous binder Providing and laying of premix sand seal coat premixed in continuous type HMP of appropriate capacity not less than 75 tonnes/ hours using specified fine aggregates and penetration grade bitumen @0.68 kg/sqm laid to specified levels, grade and cross fall complete as per technical clause 511 of MORT&H specifications.
[17.6]Construction of Embankment with Material obtained from Borrow pits NA Construction of Embankment CBR 8% (for new road/ raising/ berms/ etc.) with approved material obtained from borrow pits, including compensation of earth with all lead and lift transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2, as per technical clause 305 of MORT&H specifications.
[34.12.2]Advance Direction sign board 900x900 square as per IRC 67- 2012 with retro reflective Sheeting as per ASTM D 4956 09 and as per IRC 67 2012 fixed over 4 mm thick aluminium Composite material (ACM) sheeting having aluminium skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on a square hollow steel section post 60x60x3.2mm conforming to IS 4923 without cost of definition plate firmly fixed to ground in foundation concrete M-25 of size 0.45x0.45x0.75m for vertical post complete as per clause 801 of MORTandH specifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting and a certified copy of test reports from an independent test laboratory including three year outdoor weathering test report for sheeting tested in India condition conforming to clause 6.7 of IRC 67-2012 2. Using high intensity Microprisomatic grade retro reflective Sheeting Class B as per IRC 67 2012
[34.19.2]Hazard Marker sign board 300x900mm rectangular as per IRC 67- 2012 with retro reflective Sheeting as per ASTM D 4956 09 and IRC 67 2012, fixed over 4mm thick Aluminium Composite Material (ACM) sheeting having skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on a square hollow steel section post 60x60x3.2mm conforming to IS 4923 firmly fixed to ground including foundation concrete M-25 of size 0.45x0.45x0.60m for vertical post complete as per clause 801 of MORTandH specifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting and a certified copy of test reports from an independent test laboratory including three year outdoor weathering test report for sheeting tested in India condition conforming to clause 6.7 of IRC 67- 2012. 2. Using high intensity Microprismatic grade retro reflective Sheeting Class B as per IRC 67 2012
[34.26]Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including Reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.
[7.21.1]Brick work with common burnt clay non-modular bricks of class designation 10.5 in foundation and plinth in: 1. Cement mortar 1:4 (1 cement : 4 coarse sand)
Jimmi Kumar Contractor
Garg Construction Co.
M/s Lord Shiva construction Co.
Nirmal Singh contractor
M/s Ramesh Chander Contractor Co. P. Ltd.
yashpal setia contractor
MAHENDER SINGH CONTRACTOR
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.83 MB
BOQ_466528.xls
BOQ • 0.23 MB
AD0089427.pdf
Additional Documents • 1.86 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .