ADDN/ ALTN CUM SPL REPAIR TO BLDGS NO T-10 AND T-11 AT VSD AREA UNDER GE NORTH MEERUT

Amount

ITEM OF E/M

Taking down carefully any type of battens or conduit point wiring with conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as directed by Engineer - in - Charge.

M&L for point wiring with 1.5 Sq mm (nominal cross section area) single core, multi stranded PVC insulated, sheathed copper conductor,FRLS, cable in and including in rigid pvc conduit 20 mm dia or higher medium grade ISI marked complete with all pvc conduit accessories / fittings and sunk pressed (1.2 mm thick) steel terminal switch boxes with 3 mm thick plastic laminated hard glossy surface sheet top cover, including earth wire continuous of PVC insulated, unsheathed 1.5 Sq mm copper conductor, PVC insulated connected to all fittings, sunken boxes and common earth, earth dolly. Plastic laminated sheet screwed with brass screws, cup washers complete all as specified and directed for the following :-

One light/fan/exhaust fan/bell/buzzer point controlled by one, one way switches 5/6 Amps.

One 3 pin 5/6 amps socket outlet point on Same board, controlled by one, one way 5/6 amp switch.

One 3 pin 5/6 amps socket outlet point on independent board, controlled by one, one way 5/6 amp switch.

M&L for point wiring with 2.5 Sq mm (nominal cross section area) single core, multi stranded PVC insulated, sheathed copper conductor,FRLS, cable in and including in rigid pvc conduit 20 mm dia or higher medium grade ISI marked complete with all pvc conduit accessories / fittings and sunk pressed (1.2 mm thick) steel terminal switch boxes with 3 mm thick plastic laminated hard glossy surface sheet top cover, including earth wire continuous of PVC insulated, unsheathed 2.5 Sq mm copper conductor, PVC insulated connected to all fittings, sunken boxes and common earth, earth dolly. Plastic laminated sheet screwed with brass screws, cup washers complete all as specified and directed for the following :-

One 3 pin socket outlet, 15 amps, with cables 2.5 sqmm size on independent board, controlled by one, one way 15 amp switch.

Material and labour for sub main wiring with 6 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, sheathed, copper conductor FRLS- FLEXIBLE WIRING CABLE. CONFORMING TO IS: 694-1990 with and including continuous earth wire of size 6.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable, drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, PVC conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing & including taking down old unservicable submain complete all as specified & directed. Note:-One meter of conduit along with 2x6 sq mm wire and one 6 sq mm earth shall be measured as one unit length.

S & F Switch piano flush button single pole one way 5 amp complete all as specified and directed

S & F Socket outlet 3 pin, 5 Amp, flush type complete all as specified and directed

S & F Switch piano flush button single pole one way 15 amp complete all as specified and directed

S & F Socket outlet 3 pin, 15 Amp, flush type complete all as specified and directed

S&F ceiling rose, surface type, bakelite, 65 x 25 mm, three terminal complete all as specified and directed.

S&F in repairs MCCB distribution board,VTP&N, double door,sheet steel, enclosure powder coated with 200Amps rated busbar with neutral link, 415 V 4 way fixed on wall duly groutaded insolid wall or on wooden board with electrical connection complete all as specified and directed.

S&F single pole and neutral DBs, 8 way, 240 V, double door type suitable for mounting incoming and outgoing MCB’s double pole/single pole,complete all as specified and directed.

S&F MCCB 4 pole, 415 V , 100 Amp, 16KA fixed thermal and fixed magnative setting complete all as specified and directed.

Supply & fix MCB SP, 5 to 32 Amps, 240 volts, 1 modules suitable for single phase circuit of ‘C’ series, 10 KA complete all as specified & directed.

S&F isolator double pole 40 Amp, 240 volts rating ‘C’ series, complete all as specified & directed.

Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate all as specified and directed.

Supply and fixing Led lamp 9/10 watt.

Supply & fixing LED tube light fitting T/5 surface mounting poly carbonate 240 volts 20 watts, 6500K complete all as specified & directed.(Make- Havelles

S&F in repairs LED Recess mounted, ceiling pannel, 2'x2' , 35/36 watts, 240V light fitting with heat exchanger unit complete all as specified and directed.

Supply and fixing fan ceiling complete with blades, down rods, electronic regualtor and accessories ,230V, 1200 mm sweep. BEE Five Star rated with Brushless direct current motor (BLDC) complete all as direced.

Supply and fixing Exhaust metal body fan with louver and fixing accessories 230 Volt and 300mm sweep.

Supply and fixing 35W LED building security light energy saving & environmental friendly long life luminaire with high power LEDs as light source and electronic driver including security light brackets of 32 mm dia GI pipe medium grade upto 1.2 mtr long bend to shape at 100-120 degree including flat iron clamps and Suitable nuts and bolts grouted in wall including all material required for fitting all as specified and directed by Engr-in-Charge.

Supply , Laying and testing cable XLPE insulated screened, PVC bedded, Galvanised steel srip or wire armoured electric power cable (Heavy duty) 1100 V Grade, aluminium conductor of size 35 sqmm 3.5 Core.

M & L for fly ash brick protection length of brick shall be laid across the length of cable) all as specified and directed.

GI light grade tubing 40mm dia laid in trenches, road crossing , pasing through pipe or laid in wall/pole

Taking down existing ceiling fan exhuast fan of any size, CeiIing cable end,dismentalling blades ,make one set of three blades and keep them safe to deposited to E/M yard complete all as directed.

Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed.

ITEM OF B/R

Excavating over areas, n exc 1.5 m deep and getting out complete all as specified and directed.

M&L for providing plain cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete for posts, /pillars, footings etc complete all as specified and directed.

Surface dressing of ground in soft/loose soil not exceeding 15 cm deep and getting out, site clearance including clearing away all grass vegetation, saplings,shrubs, brushwood, undergrowth, roots, and trees not exceeding 30 cm girth (measured one metre above ground level) and removing rubbish upto a distance of outside the periphery of defence land. Roots of trees and saplings shall be removed as described under filling of trees root space and hollow filled up with earth including levelling and ramming, complete all as specified and directed.

M&L for TMT reinforcement bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L TMT reinforcement bars 5 mm dia and over upto including 10 mm dia as in stirupps and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for design mix RCC M-25 concrete as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for design mix RCC M-25 concrete as in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for design mix RCC M-25 concrete as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, rough finish surfaces, complete all as spd and directed.

M&L for formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide complete all as specified and directed. (NOTE :- Where RCC/PCC band in walls, spanning and opening, the formwork soffit only shall be paid for under item for formwork to sides of concrete foundation footing bases of column raft and raft beam sides and soffits (if any) of and similar work for flat rough finish surfaces)

M&L for form work to sides of pillars, posts, struts, piers, columns and stanchions, flat, for rough finish surfaces complete all as specified and directed.

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doo0rs etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete (Fe- 290) (Gde E-165) quality B all as specified and directed.

S&F ornamental and intricate design portions framed and hund as gates including pintle hinges, stops hand made sliding bolts etc. complete all as specified and directed.

Prepration of newly steel surface or previously untreated surfaces of any description, over 10cm in width or grith along with priming with red oxide, zinc chrome primer and applying two coat of synthetic enamel paint all as specified and directed by engg-in-charge.

M&L for 20mm thick machine cut Granite stone slab of DARK BLACK (tablee rubbed and polished) in steps, jambs, pillars, windowcills,cooking platforms or vertical surfaces on pillars at any position and like set in cement mortar (1:4) including pointing in colured cement to match (1:2) using marble dust with admixture of pigment to match with shade of granite including 10mm rendering in CM 1:3 as backing coat complete all as speciifed and directed.

M&L for old size brick work with fly ash bricks old size, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished even and fair complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:6 on other than fair faces of brick work or concrete surfaces, finished even and fair complete all as specified and directed.

M&L for preparing newly plastered surfaces and applying two coat of cement base paint over one coat of alkali resistant primer, complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed.

Dismantling posts or struts( steel ) any section, including taking out embedded portion and making good disturbed portion and making good disturbed ground & seperating scrap from concrete complete all as specified and directed

Dismantling Expanded metal, any thickness or mesh, fixed with steel or wood fillet, if any not exc 4 Kg/Sqm complete all as specified and directed

Demolition of brick work built in cement mortar

Dismantling plain or corrugated asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings or similar pattern roof coverings incl ridges of any description as in roof and including removal from the site complete all as specified and directed.

S&F pre-painted Galvalume aluminium zinc coating (AZ-150) GI based corrugated steel sheet 0.5mm thick of Green colour having a tensile strength of 550 Mpa fixed on Z purlins with self tapping screws as in roof covering, cladding withself tapping screws as specified and directed by engg - in- charge

S&F pre-painted Galvalume aluminium zinc coating (AZ-150) GI based plain steel sheet 0.5mm thick of Green colour having a tensile strength of 550 Mpa fixed on Z purlins with self tapping screws as in roof covering, cladding to wall, fixed with self tapping screws as specified and directed by engg - in- charge

Dismantling of unframed timber scantlings 40 sq. cm and over in section, in any position as specified and directed by Engr - in- Charge.

S & F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc as directed and specified and directed by by engg - in- charge.

M&L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove, dust, etc. complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubish off the premises.

M&L joint free non-skid coloured ceramic tiles 7 to 8 mm thick square /rectangular) area of each tile exceeding exceeding 0.06 sqm but not exceeding 0.16 sqm, in floors etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match as specified and directed.

M&L screed bed or bedding layer of mortar 15mm thick for laying floor finish and on surface of wallls behind tiles in CM (1:6) as specifed and directed.

M&L back coat or bedding layer of mortar 10mm thick for laying floor finish and on surface of wallls behind tiles in CM (1:4) as specifed and directed.

M&L coloured glazed ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match.

M&L for 18-20mm thick kota stone of size 580X580 mm mirror polished laid and jointed with grey cement and pigment to match the colour of the slab including cutting,rubbing and polshing complete all as specified and directed.

M&L for 18-20 mm thick kota sotne as on skirting or vertical surfaces mirror polished laid and jointed with grey cement and pigment to match the colour of the slab including cutting ,rubbing and polishing complete all as specified and directed.

M&L screed bed or bedding layer of mortar 20mm thick for laying floor finish in CM (1:6) as specifed and directed.

Taking down chowkhat or frames of door/ window / ventilators with shutter(Without taking off shutter from the frame) n.exc 1.50 m each.

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.5 sq. m but n exc 4 sq. m each.

S & F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately)” but wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900 ) used instead of exposed portion of PVC sheet beading.

S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made

S&F butt hinges 100mm long medium weight cold rolled mild steel and fixed.

S&F MS barrel tower bolt 200 mm long, stove enamelled black, with bright bolt

S&F MS pressed handle 150mm long, oval type, stove enamelled black

S&F 250mm long mild steel sliding door bolts stove enamelled black ISI marked, with bright bolt not less than 12mm dia with and inc min of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed

Taking down of cement or cement lime plaster/skirting/ dado of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc.

M&L for applying 15mm thick rendering in Cm (1:6) using ready mix plaster bags on brick/concrete surfaces of external and internal walls finished even and fair as per manufacturer instructions, complete all as specified.

M&L preparing of new plastered surface of walls with 2mm thick wall care putty and applying two coat of oil bound distemper over a coat of primer complete all as specified and directed by by engg - in- charge.

Dismantling of board for false celling of including snap grid any description and size complete all as spd and directed

S&F anodised aluminium snap grid frame work for false ceiling suspensi system size 600mm x 600mm complete all as specified and directed.

Supplied and fixed non asbesots coloured textured designer ceiling board 4 mm thick of size 595x595mm fixing with screwes/ clips complete all as per manufacturares instructions and as directed

M&L preparing of old plastered surface of walls inc patty repairs with wall care putty and applying one coat of exterior acrylic emulsion paint (weather proof paint) complete all as specified and directed by Engr-in-Charge.

M&L preparing of old plastered surface of walls inc patty repairs with wall care putty and applying two coat of exterior acrylic emulsion paint (weather proof paint) complete all as specified and directed by Engr-in-Charge.

Demolition of concrete of any description & depth and in any position as specified by engg in charge

M&L 75mm thick PCC 1:3:6 type C-2 (using 40mm graded aggregate) as in flooring, plinth,proctection etc surface finished even and smooth without using extra cement and cutting grooves all along the thickness all as specified & directed.

M&L for cement concrete Type B-1, 1:2:4 (Using 20 mm graded stone aggregate as in lintels upto 1.5 M clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses parapets and railings upto 60 cm in height copings, kneelers, apex stones bed plates, etc complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing

S&F Aluminium anodised, barrel tower bolts of extruded section and fixed tower bolt 150 mm long, with bright bolt all as specified and directed.

S&F Extruded aluminium alloy handles, fabricated type, anodised 125mm long all as specified and directed.

S&F in repair of vitreous china squatting pan size 580 x 440 mm white with integral foot rest including replacement of ‘P’ or S trap, lime concrete bedding & making good floor complete all as spd & directed.

S&F in repair Vitreous china wash down water closet pan (Pedestal pattern) white, and seat cover all as specified and directed.

S&F in repair Vitreous China urinals, bowl type size 465X355X265 (back to corner wall type), complete including providing and fixing plus, bedding urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe all as spd and directed.

Supply and fixed in repair PVC low level flushing cistern 10 Ltr capacity syphonic action type white as approved, ball valve float valve and handle incl bracket complete

S&F in repair vitreous china wash hand basin, flat back, white size 550 x 400 mm incl bracket, PVC waste pipe & waste coupling 32 mm dia all as specified and directed by engg-in- charge.

Taking up or down steel tubing and connection 15 mm bore pipe.

S&F tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors for 15 mm bore.

Taking up or down steel tubing and connection 20 mm bore pipe.

S&F tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors for 20 mm bore.

S&F rotational moulded water storage tank (cylinderical vertical with closed top ) hoisted and fixed in position capacity 500 ltrs with 20mm bore PTMT float valve incl dismantling of PVC water tank complete all as speccified and directed.

Taking down rainwater pipes (any size or pattern), including all fittings, etc.

S&F PVC (SWR) pipes 75mm in dia single socketed in any length with rubber ring joints fixed to walls as per specified and directed by engg - in- charge.

S&F 110 mm bore PVC (SWR) pipes in any length with rubber ring joints fixed to walls including clamps complete all as spd & directed

S&F in repairs CP bib tap 15mm bore cast copper alloy with crutch butterfly handle, screwed down and screwed for iron pipe or for brass ferrule and fixed as specified and directed.

S&F in repair 15 mm PTMT stop cock/angle walve of any colour high pressure screwed for iron pipe and fixed (Min weight 15 mm - 90 Gm)

S&F PVC connection fibre reinforced 450mm long with brass check nuts and PVC washers at both ends

S&F in repair for Stop cock,15 mm cast copper alloy chromium plated fancy type with long shank &cup(concealed type) with capstan heads, screwed down, high pressure, with crutch or butterfly handle screwed for 15mm bore iron fixed complete

S&F in repair for Stop cock/angle cock,15 mm cast copper alloy chromium plated fancy type with long shank &cup with capstan heads, screwed down, high pressure, with crutch or butterfly handle screwed for 15mm bore iron fixed complete

S&F in repair for 15 mm dia pllar tap long shank wth swan neak cast copper alloy chromium plated fency type wth capestan heads screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed.

S&F in repair CP health faucet set classic chrome 2 in 1 (with tube and hook) with 1 mtr CP tube & Hook

Supplied and fixed in repairs glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm longcomplete all as specified and directed

M&L for 16 to 20 mm thick granite work (colour & type decided by Engg-in-charge) in stair steps, jambs, pillars, window-cills, cooking plateforms and other similar work in cement mortar (1:4) inc pointing in white cement (1:2) using marble dust with admixture of pigment to match with the shade of granite.

S&F in repair MS door springs for doors, 300mm, ordinary rat tail rod pattern springs including roller and roller plate and fixing in MS frame or wooden frame complete.

S&F in repair for 125 mm grating doom complete all as specfied.

S&F in repair for tubular towel rail 20 mm CP brass 600 mm long complete all as specfied.

S&F in repair CP toilet paper holder complete all as spd and directed. Make peral/paryag

S&F in repair for CP soap dish any type, fixed to plugs with chromium plated brass screws complete all as specfied.

S&F for PVC (SWR) vent cowl 75 mm complete all as specfied.

S&F for 75 PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specieid and directed

S&F for PVC (SWR) gully trap 125/110 mm setting and jointing with solvent cement complete all as specified and direted.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out including clearing away all grass vegetation, saplings, shrubs, brushwood, undergrowth, roots, and trees not exceeding 30 cm girth (measured one metre above ground level) and removing rubbish upto a distance of 50 metres outside the periphery of the area under clearance except in the case of surface dressing which includes for all the foregoing except clearing away of trees complete all as percified and directed.

Removing excavated material n.exc 50m and depositing where directed at a level n exc 1.5 m above the starting point in any type of soil.

M& L for hard core, of broken stones/boulders to gauge n exc 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface completed all as specified and directed

M&L for machine pressed glossy finish precast interlocking paver blocks any shape and size confiming to is 15658-2006 of 80mm thickness M-40 grade with grey cement and pigment complete all as specified and directed by Engr-in-Charge.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engr-in-Charge.

M&L for cement concrete Type B-1, 1:2:4 (Using 20 mm graded stone aggregate Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges all as specified and directed.

M&L for 75mm thick cement conceret type D-2 1:4:8 (40 mm graded aggregate) complete all as specified and directed by Engr-in-Charge.

M&L for PCC 1:3:6, Type C-1, using 20 mm graded stone aggregate as in coping including use and waste of form work and finishing the exposed faces of concrete even and smooth without using extra cement complete all as specified and directed.

M&L for Brick with fly ash bricks straight or curved on plan exceeding 6m mean radius built in cemet mortor (1:4) complete all as specified and directed.

M&L for 150mm bore of reinforced concrete pipe class NP3 laid in trenches and jointed with collar complete all as specified and directed.

M&L for conrete bed to drain pipes of size 150 mm bore packing under and haunching against the sides of pipes after they are laid and fitted in cement concrete, Type C2, 1:3:6, using 40mm graded stone aggregate complete all as specified and directed.

M&L for Precast RCC 1:2:4, Type B-1 using 20 mm graded stone aggregate as in landings, cover slabs (for manholes etc), chullah hoods, chajjas, water troughs, managers, Shelves and similar articles with plain faces including formwork, set in cement mortar 1:4 complete all as specified and directed.

M&L for Rendering 15mm thick in CM 1:4 on brick/ concrete other than fair surfaces finished even and smooth without using exra cement including mixing water proofing compound as per Manufacturer's instructions complete all as specified. Note: Water proofing compound shall be measured and paid seperately.

Supply one liquied water proofing compound (ISI Marked) of approved makes.

M&L for PCC 1:2:4, Type B-1, using 20 mm graded stone aggregate as in Surface Channels and Drain etc. complete all as specified and directed.

Extra for forming fair finishing drain or channel 90cm inner girth in cement concrete, using extra cement incl forms, moulds, mitred/stopped ends etc complete all as specified and directed.

M&L for construction of soakage well incl excavation in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M-25 concrete including intercepting chamber and screen chamber made of brick masonry in CM, RCC cover slab inM25/SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size complete of size 1.80m dia X 7.5m deep. Ref TD HQ CEBZ drg No TD/309 sheet No 1/4, 2/4, 3/4 & 4/4.

S&F Bio Digester Septic Tank made of FRP with micro biological capacity 10000 Ltrs of shape & size as per manufacturer design incl necessary excavation in any type of soil, 150mm thick PCC 1:4:8 type D-2 in foundation, returning filling, inlet, outlet and vent pipe complete. Makes : ESWS Technologies Pvt Ltd/E-Tech System/JRMS Engineering Works/ Epsilon Enterprises. Note : The make of Biodigester Tank shall be approved by GE.

S&F powder coated anodized aluminium windows sliding type (3 shutter type) with sash bars, aluminium sections wighing 0.55 kg/mtr (minimum) incl stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40mm fixed with clips, neoprene rubber gasket with aluminium beading screws suitable anodized fitting such as hinges, handles including powder coated aluminium frame with one or more rebates including supply and fixing 5.5 mm thick glass complete all as specified and directed.

S&F framed work sch as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed.

S&F Z pulins made out of galvanized steel sheet thickness not less than 2 mm, fixed with 12 mm dia SAG rods complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for laying of Cable or Pipe etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/ losse soil and leveling of bottom surface to required level complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. in soft/ losse soil complete all as specified and as directed.

Supply and spreading clean fine dry river sand in trenches for cushioning of under ground cable/ cable duct complete all as specified and as directed. Note: Only punned thickness shall be measured for payment purpose.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point in soft/ losse soil complete all as specified and as directed. Note: The Sch Credit of amount Rs. 636639 will be deducted from the Quoted amount.

M/S Keshav Brothers (BID ID -3142542)

Arun Construction Co. (BID ID -3142556)

Tridev Construction Company (BID ID -3141732)

m/s gupta construction (BID ID -3141051)

M/S. JAI PRAKASH GUPTA (BID ID -3142016)

Shikhar ji Enterprises (BID ID -3142595)

sath sahib associates (BID ID -3140784)