Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹11.8 LAccepted-AOC | ₹11.8 L | 1 | Accepted-AOC Y |
| 2 | 2₹11.8 L+₹83 (<0.01%)Rejected-Finance | ₹11.8 L+₹83 (<0.01%) | 2 | Rejected-Finance N |
Tender Value
₹11.9 L
EMD Value
₹24,000
Closing Date
29 May 2026, 12:00 pmClosed
EE RED Jhansi
EE RED Jhansi
Block Gursarai ke gram Devra Khurd main Composite Vidhyalay ke pass teen shed ka nirman karya
2026_REDUP_1151499_6
103/EE/RED/Tender/2026-27 Dt. 08.04.2026
Open Tender
Civil Works
Percentage
90 days
Block Gursarai ke gram Devra Khurd main Composite
Please refer Tender documents.
2 documents required · 2 mandatory
₹854
₹24,000
Yes
22 Jul 2026
21 May 2026
29 May 2026
21 May 2026
29 May 2026
21 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work in excavation in trenches for foundations pipes cables etc. in ordinary soil (loam clay or sand) including lift upto 1.5 m lead upto 50m and dressing of sides and ramming of bottom sand disposal of surplus excavated earth as directed by the Engineer i/c with in a lead of 50m. | 1 | CUM | 126.46 | ₹126.33 |
| 2 | Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded stone ballast 40mm nominal size) & curing complete, including cost of form- work, in foundation & floors. | - | CUM | 4,853.07 | - |
| 3 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - 1:1.5:3 (1 cement: 1.5 coarse sand (zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | - | CUM | 6,444.45 | - |
| 4 | As in item no. 4 above but for Column (Using 1:1.5:3 Mix concrete) | - | CUM | 6,444.45 | - |
| 5 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level or above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. | - | QTL | 7,683.55 | - |
| 6 | Cement concrete flooring 1:2:4 (1 cement ; 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate. | - | SQM | 437.57 | - |
| 7 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Electric resistance or induction butt welded tubes | - | KG. | 138.5 | - |
| 8 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :Ridges plain (500 - 600mm) | 1 | R.M. | 379.26 | ₹378.88 |
| 9 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 1 | SQM | 526.24 | ₹525.71 |
| 10 | Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. (I) 0.80 mm thick with zinc coating not less than 275 gm/m² | 1 | R.M. | 733.55 | ₹732.82 |
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.85 MB
BOQ_2156933.xls
BOQ • 0.30 MB
sbd103.pdf
Tender Documents • 1.16 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .