Re organisation of overhead line from Hill top colony to Barigram colony for feeding power to Goti dwara line to increase the voltage and load balancing of Hill top colony, Barigram and Area account colony line in as well as replacement of OH Line

Amount

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required - Above 8.0 metre and upto 10.0 metre

erection of all aluminium conductor of 7/1.96 mm to 7/3.10 mm diameter including binding etc as required

Dismantling of overhead lines comprising of copper /aluminium overhead conductor, G.I. wire cross arms, insulators etc. as required.

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 2 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required.

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 4 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required

Erection of angle iron/ channel iron cross arm on wood/ RCC/ PCC/ steel tubular/ rail pole etc. as required

Supplying and erection of stay set complete (galvanised) with 19/ 20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle ( 20 mm X 60 cm ), 7/ 3.15 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.

Supplying and erection of 100 mm X 110 mm shackle insulator with G. I. Bolt, nuts and straps etc. as required

Supply and providing of 6 SWG GI wire

Erection of GI wire no 8 SWG including binding etc as required

Erection of cradle guard as required

Supplying and erection of 100 mm x 65 mm pin insulator with G.I. spindle and nuts etc. as required.

Felling trees of the girth (measured at a height of 5 m to 10 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material - up to and including 30 cm girth

dismantling of jumper

erection of jumper

dismantling of connection of service wire and re erction of service connection for load balancing

Total impact of GST for the purpose of CTC

SUNRISE ENTERPRISES (BID ID -1132522)