Construction Work of New office building at RPF thana Wardha.

01-Construction Work of New office building at RPF thana Wardha. 18185529.69 Below/P

02-Construction Work of New office building at RPF thana Wardha. 1653530.63 Below/P

Item Breakup - 01-Construction Work of New office building at RPF thana Wardha.

EARTH WORK:- Earth work in excavation by cum mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m . (a) All kinds of soil. (DSR-2023 DIRECTORY ITEM CODE - 2.8.1) NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY

EARTH WORK:- Filling available excavated cum earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. (DSR-2023 DIRECTORY ITEM CODE - 2.25)

EARTH WORK:- Excavating, supplying and cum filling of local earth (including royalty) by mechanical transport up to a lead of 5 km, also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc., complete. (DSR-2023 DIRECTORY ITEM CODE - 2.25A)

CONCRETE WORK:- Providing and laying in cum position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : (a) 1:3:6 (1 Cement : 3 coarse sand(zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources). (DSR-2023 DIRECTORY ITEM CODE - 4.1.6)

CONCRETE WORK:- Providing and laying damp- Sqm proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20mm nominal size derived from natural sources). (DSR-2023 DIRECTORY ITEM CODE - 4.11)

REINFORCED CEMENT CONCRETE:- Providing cum and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (a) 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). (DSR-2023 DIRECTORY ITEM CODE - 5.1.2)

REINFORCED CEMENT CONCRETE:- Reinforced cum cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : (a) 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). (DSR-2023 DIRECTORY ITEM CODE - 5.2.2)

REINFORCED CEMENT CONCRETE:- Reinforced cum cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). (DSR-2023 DIRECTORY ITEM CODE - 5.3)

REINFORCED CEMENT CONCRETE:- Centering Sqm and shuttering including strutting, propping etc. and removal of form for : (a) Foundations, footings, bases of columns, etc. for mass concrete. (DSR-2023 DIRECTORY ITEM CODE - 5.9.1) NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY

REINFORCED CEMENT CONCRETE:- Centering Sqm and shuttering including strutting, propping etc. and removal of form for : (b) Suspended floors, roofs, landings, balconies and access platform. (DSR-2023 DIRECTORY ITEM CODE - 5.9.3)

REINFORCED CEMENT CONCRETE:- Centering Sqm and shuttering including strutting, propping etc. and removal of form for : (c) Lintels, beams, plinth beams, girders, bressumers and cantilevers. (DSR-2023 DIRECTORY ITEM CODE - 5.9.5)

REINFORCED CEMENT CONCRETE:- Centering Sqm and shuttering including strutting, propping etc. and removal of form for : (d) Columns, Pillars, Piers, Abutments, Posts and Struts. (DSR-2023 DIRECTORY ITEM CODE - 5.9.6)

REINFORCED CEMENT CONCRETE:- Centering Metre and shuttering including strutting, propping etc. and removal of form for : (e) Edges of slabs and breaks in floors and walls (i) Under 20 cm wide. (DSR-2023 DIRECTORY ITEM CODE - 5.9.16.1)

REINFORCED reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. (a) Thermo-Mechanically Treated bars of grade Fe-500D or more. (DSR-2023 DIRECTORY ITEM CODE - 5.22.6)

MASONRY WORK:- Brick work with non modular cum fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in : (a) Cement mortar 1:4 (1 cement : 4 coarse sand). (DSR-2023 DIRECTORY ITEM CODE - 6. 34. 1)

CLADDING WORK:- Providing and fixing 18 mm Sqm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. (a) Granite stone slab colour black, Cherry/Ruby red (i) Area of slab over 0.50 sqm. (DSR-2023 DIRECTORY ITEM CODE - 8.2.2.2)

CLADDING WORK:- Providing edge moulding to Metre 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. (a) Granite work. (DSR-2023 DIRECTORY ITEM CODE - 8.3.2) NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY

CLADDING WORK:- Providing and fixing Ist Sqm quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (DSR-2023 DIRECTORY ITEM CODE - 8.31)

WOOD AND P.V.C WORK:- Providing wood work cum in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). (a) Kiln seasoned and chemically treated hollock wood. (DSR-2023 DIRECTORY ITEM CODE - 9.1.3)

WOOD AND P.V.C WORK:- Providing wood work cum in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc. (a) Kiln seasoned and chemically treated hollock wood. (DSR-2023 DIRECTORY ITEM CODE - 9.3.2)

WOOD AND P.V.C WORK:- Providing and fixing Sqm panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: Butt hinges and necessary screws shall be paid separately) (a) Second class teak wood (i) 30 mm thick shutters. (DSR-2023 DIRECTORY ITEM CODE - 9.5.1.2)

WOOD AND P.V.C WORK:- Providing and fixing Sqm panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. (a) Float glass panes (i) 4 mm thick glass pane (weight not less than 10 kg/sqm). (DSR-2023 DIRECTORY ITEM CODE - 9.7.7.1)

WOOD AND P.V.C WORK:- Providing and fixing Sqm ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: (a) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. (DSR-2023 DIRECTORY ITEM CODE - 9.21.1)

WOOD AND P.V.C WORK:- Providing and fixing Kg M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. (a) Fixed to openings /wooden frames with rawl plugs screws etc. (DSR-2023 DIRECTORY ITEM CODE - 9.48.2) NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY

WOOD AND P.V.C WORK:- Providing and fixing Each ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (Copper oxidised as per IS 1378) (a) 250x16 mm. (DSR- 2023 DIRECTORY ITEM CODE - 9. 62. 2)

WOOD AND P.V.C WORK:- Providing and fixing Each ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378) (a) 150x10 mm. (DSR-2023 DIRECTORY ITEM CODE - 9.63.3)

WOOD AND P.V.C WORK:- Providing and fixing Each ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378) (a) 125 mm. (DSR-2023 DIRECTORY ITEM CODE - 9.66.1)

WOOD AND P.V.C WORK:- Providing and fixing Each bright finished brass hanging type floor door stopper with necessary screws, etc. complete. (DSR-2023 DIRECTORY ITEM CODE - 9.82)

WOOD AND P.V.C WORK:- Providing and fixing Each aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : (a) 250x16 mm. (DSR-2023 DIRECTORY ITEM CODE - 9.96.2)

WOOD AND P.V.C WORK:- Providing and fixing Each aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : (a) 150x10 mm. (DSR-2023 DIRECTORY ITEM CODE - 9.97.4)

WOOD AND P.V.C WORK:- Providing and fixing Each aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : (a) 125 mm. (DSR-2023 DIRECTORY ITEM CODE - 9.100.1) NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY

WOOD AND P.V.C WORK:- Providing and fixing Sqm factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in- charge, manufacturer's specification & drawing. (a) 30 mm thick pre laminated PVC door shutters. (DSR-2023 DIRECTORY ITEM CODE - 9.120.2)

ALUMINIUM WORK:- Providing and fixing Kg aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : (a) For fixed portion (i) Powder coated aluminium (minimum thickness of powder coating 50 micron). (DSR-2023 DIRECTORY ITEM CODE - 21.1.1.2) NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY

ALUMINIUM WORK:- Providing and fixing Kg aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : (b) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). (i) Powder coated aluminium (minimum thickness of powder coating 50 micron). (DSR-2023 DIRECTORY ITEM CODE - 21.1.2.2)

ALUMINIUM WORK:- Providing and fixing Sqm glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): (a) With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm). (DSR-2023 DIRECTORY ITEM CODE - 21.3.1)

STEEL WORK:- Providing and fixing in position Sqm collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. (DSR-2023 DIRECTORY ITEM CODE - 10.3)

STEEL WORK:- Providing and fixing hand rail of Kg approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. (a) G.I. pipes. (DSR- 2023 DIRECTORY ITEM CODE - 10.26.3)

FLOORING:- Cement concrete flooring 1:2:4 (1 Sqm cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. (a) 40 mm thick with 20 mm nominal size stone aggregate. (DSR-2023 DIRECTORY ITEM CODE - 11.3.1) NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY

FLOORING:- Providing and laying rectified Sqm Glazed Ceramic floor tiles of size 300x300mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4(1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. (DSR-2023 DIRECTORY ITEM CODE - 11. 39

FLOORING:- Providing and laying vitrified floor Sqm tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS : 15622 , of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. (a) Size of Tile 600x600 mm. (DSR-2023 DIRECTORY ITEM CODE - 11.41.2)

FLOORING:- Providing and laying Vitrified tiles Sqm in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make in all colours & shade in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete. (a) Size of Tile 600x600 mm. (DSR-2023 DIRECTORY ITEM CODE - 11.46.2)

ROOFING:- Providing and fixing on wall face Metre unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. (i) Single socketed p i p e s . (a) 110 mm diameter. (DSR-2023 DIRECTORY ITEM CODE - 12.41.2)

ROOFING:- Providing and fixing on wall face Each unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. (a) Single tee without door (i) 110x110x110 mm. (DSR-2023 DIRECTORY ITEM CODE - 12.42.4.2)

WATER PROOFING:- Grading roof for water cum proofing treatment with (a) Cement mortar 1:3 (1 cement : 3 coarse sand). (DSR-2023 DIRECTORY ITEM CODE - 22.14.2)

FINISHING:- 12 mm cement plaster of mix : (a) Sqm 1:6 (1 cement: 6 fine sand). (DSR-2023 DIRECTORY ITEM CODE - 13.1.2)

FINISHING:- 15 mm cement plaster on the Sqm rough side of single or half brick wall of mix : (a) 1:4 (1 cement: 4 fine sand). (DSR-2023 DIRECTORY ITEM CODE - 13.2.1)

FINISHING:- 6 mm cement plaster of mix : (a) Sqm 1:3 (1 cement: 3 fine sand). (DSR-2023 DIRECTORY ITEM CODE - 13.16.1) NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY

FINISHING:-- Providing and applying plaster of Sqm paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. (DSR-2023 DIRECTORY ITEM CODE - 13.26)

FINISHING:- Distempering with 1st quality Sqm acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer, of required shade and colour all complete : (a) New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre. (DSR-2023 DIRECTORY ITEM CODE - 13.41.1)

FINISHING:- Finishing with Deluxe Multi surface Sqm paint system for interiors and exteriors using Primer as per manufacturers specifications : (a) Two or more coats applied on walls @ 1.25 ltr/10 sqm. over and including one coat of Special primer applied @ 0.75 ltr / 10sqm. (DSR-2023 DIRECTORY ITEM CODE - 13.48.1)

FINISHING:- FINISHING:- Finishing with Deluxe Sqm Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : (b) Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.75 ltr/ 10 sqm of approved brand or manufacture. (DSR-2023 DIRECTORY ITEM CODE - 13.48.2)

FINISHING:- Painting with synthetic enamel Sqm paint of approved brand and manufacture to give an even shade : (a) Two or more coats on new work. (DSR-2023 DIRECTORY ITEM CODE - 13.61.1)

ROAD:- Preparation and consolidation of sub Sqm grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re- olling the sub grade and disposal of surplus earth with lead upto 50 metres. (DSR-2023 DIRECTORY ITEM CODE - 16.1)

ROAD WORK:- Supplying and stacking at site. cum (a) 90 mm to 45 mm size stone aggregate. (DSR-2023 DIRECTORY ITEM CODE - 16.3.1)

ROAD WORK:- Supplying and stacking at site. cum (b) 63 mm to 45 mm size stone aggregate. (DSR-2023 DIRECTORY ITEM CODE - 16.3.2)

ROAD WORK:- Supplying and stacking at site. cum (c) 53 mm to 22.4 mm size stone aggregate. (DSR-2023 DIRECTORY ITEM CODE - 16.3.3)

ROAD WORK:- Supplying and stacking at site. cum (d) Moorum. (DSR-2023 DIRECTORY ITEM CODE - 16.3.10)

ROAD compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density. (DSR-2023 DIRECTORY ITEM CODE - 16.4) NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY

ROAD WORK:- Providing and laying factory Sqm made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineer in-Charge. (a) 60mm thick Cement concrete paver block of M-35 grade with approved colour, design & pattern. (DSR-2023 DIRECTORY ITEM CODE - 16.91.1)

SANITARY INSTALLATIONS:- Providing and Each fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: (a) White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. (DSR-2023 DIRECTORY ITEM CODE - 17.1.1)

SANITARY INSTALLATIONS:- Providing and Each fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required : (a) W.C. pan with ISI marked white solid plastic seat and lid. (DSR-2023 DIRECTORY ITEM CODE - 17.2.1)

SANITARY INSTALLATIONS:- Providing and Each fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : (a) Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern. (DSR-2023 DIRECTORY ITEM CODE - 17.5.2)

SANITARY INSTALLATIONS:- Providing and Each fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required : (a) Single squatting plate with 5 litre P.V.C. automatic flushing cistern. (DSR-2023 DIRECTORY ITEM CODE - 17.6.1) NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY

SANITARY INSTALLATIONS:- Providing and Each fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: (a) White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap. (DSR-2023 DIRECTORY ITEM CODE - 17.7.2)

SANITARY INSTALLATIONS:- Providing and Each fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 g m s . (DSR-2023 DIRECTORY ITEM CODE - 17.71)

SANITARY INSTALLATIONS:-Providing and fixing Each PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. (a) 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms. (DSR-2023 DIRECTORY ITEM CODE - 17.73.1)

SANITARY INSTALLATIONS:-Providing and fixing Each PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. (b) 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. (DSR-2023 DIRECTORY ITEM CODE - 17.73.2)

WATER Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc. (a) 25 mm nominal outer dia .Pipes. (DSR-2023 DIRECTORY ITEM CODE - 18.8.3)

WATER Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work (a) 100mm nominal inner dia. P i p e s . (DSR-2023 DIRECTORY ITEM CODE - 18.9.9)

WATER SUPPLY:- Providing and fixing G.I. pipes Metre complete with G.I. fittings including trenching and refilling etc. : External work (a) 15 mm dia. nominal bore. (DSR-2023 DIRECTORY ITEM CODE - 18.21.1)

WATER SUPPLY:- Providing and fixing G.I. pipes Metre complete with G.I. fittings including trenching and refilling etc. : External work. (b) 25 mm dia. nominal bore. (DSR-2023 DIRECTORY ITEM CODE - 18.12.3) NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY

WATER SUPPLY:- Providing and fixing G.I. pipes Metre complete with G.I. fittings including trenching and refilling etc. : External work. (c) 50 mm dia. nominal bore. (DSR-2023 DIRECTORY ITEM CODE - 18.12.6)

WATER SUPPLY:- Providing and fixing ball valve Each (brass) of approved quality, High or low pressure, with plastic floats complete : (a) 25 mm nominal bore. (DSR-2023 DIRECTORY ITEM CODE -18.18.3)

WATER SUPPLY:- Providing and placing on Litre terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (DSR-2023 DIRECTORY ITEM CODE - 18.48)

WATER SUPPLY:- Providing and fixing PTMT Each grating of approved quality and colour. (a) Rectangular type with openable circular lid. (i) 150 mm nominal size square 100 mm diameter of the inner hinged round grating. (DSR-2023 DIRECTORY ITEM CODE - 18.58.2.1)

WATER SUPPLY:- Providing and fixing enclosed Each type water meter (bulk type) conforming to IS : 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. (The tail pieces if required will be paid separately) : (a) 200 mm dia nominal bore (DSR-2023 DIRECTORY ITEM CODE - 18. 60. 4)

WATER SUPPLY:- Providing and fixing PTMT Each soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fitting arrangements. Weighing not less than 106 gms. (DSR-2023 DIRECTORY ITEM CODE - 18.65) Total 24115541.30

Item Breakup - 02-Construction Work of New office building at RPF thana Wardha.

Concealed wiring for light, fan & 6 Amps plug Point points with PVC Pipe and PVC insulated copper conductor 1.5 sq.mm. size with modular board with supply of all materials.

Concealed Wiring for 6/16 Amps plug points Point with PVC Pipe and PVC insulated copper conductor 2.5 sq. mm. size with modular board supply of all materials.

Wiring for submain along with earth wire with Metre the size 2X2.5 sq.mm+1X2.5 sq.mm earth wire of PVC insulated copper conductor, single core cable in concealed/surface/recessed PVC heavy gauge conduit as required. The work shall be done as per CPWD Pt. I, manual (1972) for general specification of electrical work. All materials should be IS marked. NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY

Wiring for submain along with earth wire with Metre the size 2X4 sq.mm+1X4 sq.mm earth wire of PVC insulated copper conductor, single core cable in concealed/surface/recessed PVC heavy gauge conduit as required. The work shall be done as per CPWD Pt. I, manual (1972) for general specification of electrical work. All materials should be IS marked.

Wiring for submain along with earth wire with Metre the size 2X6 sq.mm+1X6 sq.mm earth wire of PVC insulated copper conductor, single core cable in concealed/surface/recessed PVC heavy gauge conduit as required. The work shall be done as per CPWD Pt. I, manual (1972) for general specification of electrical work. All materials should be IS marked.

SETC of 22 W round/square and surface/recces Numbers LED fitting complete with necessary fixing arrangements as per site requirement.

SETC of Indoor 20 watt box type industrial LED Numbers tube complete with associated accessories.

SETC of Energy Efficient, BLDC AC Ceiling Fan, Numbers 1200 mm Sweep, Voltage 170-250v, Single Phase, Frequency 48-52Hz, Input Power Not More Than 32W, Air Delivery 230 cmm, Speed 380 RPM, Speed Control, Remote Handset, BEE 5 Star Rating With 5 Yrs. Warranty, Authorized OEM Certificate & CPRI Test Certificate to be Submitted Along With Supply complete.

SETC of Energy efficient BLDC Wall mounting Numbers fan with 400 mm sweep of working voltage 90- 245V, 50Hz, 1350 RPM, CMM:71 of Wattage: 32 W, Motor winding should be Copper, With double ball bearings, with separate fan motor for oscillation, Wall mounting fan Colour: White complete.

SETC of 12" metal body type exhaust fan Numbers complete with motor guard, cover etc.

SETC of Distribtuion box consisting with Numbers Industrial Plug and socket 20Amp, 2P+E+DP confirming to IEC 61439-3 suitable for flush mounting and surface mounting and to be supplied along with RCBO of rating 25A/20A/16Amps with 30 mA sensitivity confirming to IS12640-2. Make of Industrial Plug, socket and RCBO shall be Legrand. L&T, HAVELLS, INDO ASIAN, ABB. Schneider

Supply, erection, testing and commissioning of Numbers 3 liter geyser with complete with connection and necessary fixing arrangements as per site requirement.

SETC of Single phase DB capacity 40 Amp. Numbers RCBO for incomer and various type SPMCB 6- 32 Amp (4x6A, 2x10A & 2x16A) for outgoing 8 Nos complete.

SETC of Three phase Distribution Board having Numbers 63 Amps 300 mA 4 pole RCBO-1 no and SP MCB 6-32 Amps-8 Nos (4x6A, 2x10A & 2x16A) on each phase as per requirement complete.

SETC of 4 core 16 sq. mm. LT XLPE insulated, Metre Armoured, PVC sheathed Alluminium Conductor cable with aluminium lugs, glands suitable nut bolt etc.

16 SETC of 4 core 70 sq. mm. LT XLPE Metre insulated, Armoured, PVC sheathed Alluminium Conductor cable with aluminium lugs, glands suitable nut bolt etc. NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY

Provision of trench in all kind of normal Soil to Metre depth 40x100cm & filling the trench (After laying cable) to bring the original condition.

Provision of trench in hard rock/soil/road track Metre crossing to depth 40x100cm & filling the trench (After laying to bring the original condition.

Supply of DWC pipe in the cable trenches Metre /under track/ along the poles/DP structuers to be provided including all connected Accesories under other sch items- DWC pipe of dia 90 mm.

Provision of maintenance free earthing as Numbers RDSO specification no. RDSO/PE/SPEC/PS/0109- 008(REV'0') complete.

Supply and laying of Gl earthing strip, 25 x 4 Metre mm with PVC sleeve -The price shall cover for supply and laying of G.I. earthing strip of 25 x4 mm size covered with black coloured PVC sleeve of superior quality from earth pit to control/distribution panel board. The earthing strip when laid on wall shall be fixed by means of suitable size of Gl clamps and screws.

Supply and erection of Storage type self- Numbers contained water cooler 150 Itrs. capacity with stainless steel body, cooling capacity 150 Itr/hr, suitable to operate on 230 volts 50 hz. AC power supply as per specification.

SETC of water purifier similar to Alfa make Numbers APARLE+ water filter cum purifier flow rate 2 Ltrs/min. complete.

SETC of Split Air Conditioner 2 Ton capacity 5 Numbers star inverter type complete as per specification.

Supply and fixing of 4 modular plate complete Point with 20 Amps starter, 25 Amps socket, 25 Amps plug complete.

Supply, Erection, testing & commissioning of Numbers material of Octagonal galvanized steel pole of 7 mtr height on cement concrete foundation complete with foundation bolts, single arm etc.

SETC of 45 W LED street light fittings complete Numbers with fixing arrangement and accessories complete.

SETC of astronomical automatic street light Numbers control panel out-door type CRCA sheet steal powder coated capacity 6 KW single phase consisting digital 24 Hr timer, 32 Amp TP contactor 40 A SPN (DP) MCB, Auto/ Manual switch with complete wiring suitable for mounted on channel/ angle fixed at electrical pole, protection - IP 32.with 100 AMP MCCB for main supply complete. Total 1653530.63