Renewal and Replacement of Wall Tiles Floors Tiles Sanitary and Bath Fitting In Various Toilets of Bhakra Right Bank Power House

Amount

Dismantling glazed tiles (to be carefully removed). (Ref of CSR 8.35)

Anti-skid floor tiles 10mm thick 300 x 300mm (fully vitrified) in flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with white cement slurry in joints including corners angles and beading. (Ref of CSR 14.72)

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colors, shades except burgundy, bottle green, black of size 300 x 450mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. (Ref of CSR 14.125)

Dismantling, disjointing, removal of G.I. pipe lines, specials, valves and fittings complete in all respects. a)15mm internal diameter pipe line. (Ref of CSR 28.63 (a))

Dismantling flanged Joints for Cast iron Pipes, Valves and specials complete in all respects. a) 50mm, 65mm, 80mm, 100mm internal diameter of pipe, valves or special (Ref of CSR 28.60 (a))

Providing and laying, jointing, fixing and testing ISI Marked uPVC Pipe Lines as per ISI 4985-2000, including specials such as tees, bends, sockets, elbow etc., cutting testing (including cost of specials) in the ground complete in all respects. B(b) 50mm i/d (Ref of CSR 28.12 B (b))

Providing , laying, jointing, fixing and testing ISI marked G.I. Pipe (as per IS 1239) B-Class Premium make such as (Jindal Hisar) including cost of specials (such as tees, bends, sockets, elbows etc.), painting with anti-corrosive bitumastic paint, testing, cutting, threading Inside building complete. a) 15mm i/d (Ref of CSR 28.35 (a))

Dismantling Sanitary fixtures such as European/Indian/Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge. (a)European/Indian/Orissa W.C., (Ref of CSR 30.88 (a))

Dismantling Sanitary fixtures such as European/Indian/Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge. (b) PVC / China Ware Cistern (Ref of CSR 30.88 (b))

Dismantling Sanitary fixtures such as European/Indian/Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge. ((c ) Wash Hand Basin / Urinal Pot (Ref of CSR 30.88 (c))

Dismantling Sanitary fixtures such as European/Indian/Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge. e)CP Bib Cock/Angle Cock/Stop Cock/Shower/Bottle Trap (Ref of CSR 30.88 (e))

Providing & Fixing in position 15mm i/d bib cock of approved make ( to the approval of Engineer-in- charge)complete in all respect. i) C.P. brass bib cock long nose/long body without flange. (Ref of CSR 30.65 A (i))

Providing and fixing in position Chinaware Indian Orissa water closet sizes 580mm of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern including cost of PVC long bent 32mm dia complete in all respect and to the entire satisfaction of engineer in charge (Ref of CSR 30.2)

Providing and fixing in position Chinaware European type water closet with P trap or S trap of approved make (to the approval of the Engineer-in- charge) consisting of 10 ltr. PVC flushing cistern, PVC short bend 32mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. (Ref of CSR 30.4)

Providing & fixing in position vitreous Chinaware white flat back or angular lipped front urinal of approved make (to the approval of the engineer-in-charge) of size 460x350x260mm with C.P.brass tube connection 300mm long complete in all respect. (Ref of CSR 30.15)

Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in- charge including brass studs without CP fittings complete in all respect. iii)Size 630mmx450mmx 830mm (Ref of CSR 30.31 (i) )

Extra for providing and fixing G.I.32mm waste pipe for urinal including elbow, reducer etc. complete in all respect. (Ref of CSR 30.19 (a))

Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) (b) Size 550mmx400mm (Ref of CSR 30.61(b))

Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in- charge) fixed into wall with rawl plugs and C.P.brass screws complete in all respect. (a) C.P. brass soap dish Large (Ref of CSR 30.60)

Providing & Fixing in position liquid soap container of approved make (to the approval of Engineer-in-charge) complete in all respect. (a) C.P. brass liquid soap container. (Ref of CSR 30.67(a))

Providing and fixing in position towel rails / ring fixed in with rawl plugs embedded in walls with brass screws, complete in all respects including cutting and making good the walls etc. (b)C.P. brass towel Rails size 20mm dia 600mm long (Ref of CSR 30.58(a))

Providing and fixing in position 15mm C.P. Pillar cock foam flow of approved make (to the approval of Engineer-in-charge (Ref of CSR 30.33)

Providing and fixing jet spray with 2’-6” long PVC pipe a) With CP brass nut (Ref of CSR 30.8 a)

Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge) complete in all respect. (a)PVC tube connection of size 15mm x300mm with C.P. Brass nut. (Ref of CSR 30.72 a)

Providing & Fixing in position stop cock /Angle valve (as approved by the Engineer-in charge). (b) C.P. brass 15mm concealed stop cock with flange. (Ref of CSR 30.66 b)

Carriage:- Earth,Surkhi, Sand, Earth, Fly Ash, Bajri, Ballast, Stone boulders, Kankar and building rubbish, Earth. (From PP-II To Neilla Store I.e. 4 Km ) (Ref of CSR 5.2 (i) )

Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. (ii) Doors of area 3 Sqm and below (Ref of CSR 8.26(a) )

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In- Charge. (Glazing and paneling to be paid separately a) for fixed portion of Chowkhats (Ref of CSR 17.45(a)) )

b) For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug / neoprene gasket required (Ref of CSR 17.45(b) )

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-In-Charge. Prelaminated particle board with decorative lamination on Both side. (Ref of CSR 17.46(ii) )

Cost of aluminum fittings complete for doors, windows such as tower bolts, handles, Stoppers and screw etc. for these fittings (Excluding sliding bolt) ii) For shutter area above 0.50 sqm (Ref of CSR 17.23(ii) )

Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : (a)300mmx16mm (Ref of CSR 17.49(A) )

Providing and fixing hydraulic door closer ISI mark with necessary screw etc. Complete I.S.I Designation No. III (size of door 851mm to 1000mm) (Ref of CSR 17.43(C) )

Vipan Kumar

Ram Ji Dass