THE WORK OF HEIGHT RAISING AND SHIRTING OF 220 KV D C MORADABAD C B GANJ LINE ON BEHALF OF U P STATE BRIDGE CO LTD CORRIDOR UNDER ELECTRICITY TRANSMISSION DIVISION II MORADABAD

Amount

TENTATIVE ESTIMATE FOR HEIGHT RAISING & SHIFTING OF 220 KV D/C MORADABAD-C.B. GANJ LINE ON BEHALF OF UP STATE BRIDGE CO. LTD. CORRIDOR UNDER ELECTRICITY TRANSMISSION DIVISION-II, MORADABAD

SUPPLY PORITION

TOWER & TOWER ACCESSORIES.

Hot dip galvanised , Hexagon ,round hexagon head transmission tower bolt,nuts washer for above tower structure as per BOM (327.88x2+154.82x2+5.44x2 +12.74x2= 1001.76Kg.)

Pipe Type Earthing material for Tower

Single Suspension Fitting suitable for ACSR Zebra Conductor.

Double tension fitting with dead end suitable for ACSR Zebra Conductor.

P.A.Rod suitable for ACSR Zebra Conductor.

Vibration Damper suitable for ACSR Zebra Conductor.

Circuit Plate (Set of two)

Phase Plate set of Red,Blue and Yellow for tention tower

Danger Plate

Number Plate

Mid span Joint for ACSR Zebra Conductor.

Repair sleeve for ACSR Zebra Conductor.

Anti Climbing Device

Jumper Cone for ACSR Zebra Conductor.

Polymer Insulator string 70 KN For 220 KV Suspension fitting.

Polymer Insulator string 160 KN For Tension fitting.

24 fiber OPGW fiber optic cable.

Supply of hardware set for 24 fiber OPGW

Junction Box (24 Fiber )

ERECTION.

WORK PORTION

Survey including preparation of profile & schedule of Tower marking of location (Route Length)

Check Survey & Final Peg Marking (Route Length)

Cost of excavation of 220 KV Tower foundation pits including all earth work back filling, watering and leveling. NBDB +9 = 02 No.@ 253.9 CUM = 507.8 CUM

Setting of Stubs including all foundation work but excluding cost of concreting and excavation (Rate per location) for 220 KV Tower. NBDB +9 = 02 Nos.

Cost of concreting M:20 for all types of foundation including cost of cement, coarse sand, stone grid, dewatering shorting and shuttering, formaing curing etc. NBDB +9 = 02 Nos.@ 25.73 CUM (FS)

Cost of concreting M:10 for all types of foundation including cost of cement, coarse sand, stone grid, dewatering shorting and shuttering, formaing curing etc. NBDB +9 = 02 Nos.@ 3.70 CUM (FS)

Installation of steel re-inforcement bars in RCC foundation including cost of cutting, welding, binding and placing them in foundation pit. NBDB +9 = 02 Nos.@ 1.606 MT

Erection of Super structure of 220 KV Tower and their extension including all works above ground level and fitting of danger, number and phase plate bird gurad.

Laying, Stringing, Tensioning, Clamping, Jointing etc. of ACSR Zebra conductor (all 6 phases) after cutting in suitable size after fitting of Insulator strings, hardware fittings with all cost of men, T&P, Tractor, Steel, celling. Cone press machine etc. Required

Laying, Stringing, Tensioning, Clamping, Jointing etc. of ACSR Zebra conductor (all 3 phases) after cutting in suitable size after fitting of Insulator strings, hardware fittings with all cost of men, T&P, Tractor, Steel, celling. Cone press machine etc. Required

Laying, Stringing, Tensioning, Clamping, Jointing, including fitting of all necessary hardware and accessories of OPGW & OFAC termination at S/S end to end connectivity and testing etc. on 220 KV Line.

Splicing & Installtion of Joint Box (24 Fibre)

Pipe Type Earthing of newly Towers.

Tack welding of all the bolts up to the height of one section or 5 Mtrs. From ground level whichever is higher with three tacks of 10 mm/12 mm 2 eletrodes and applicable of 2 inc rich point on the affected surface including cost of materials.

Providing barricade for avoiding any accident during the period of excavation to back filling of soil.

Carriage of materials from sub-station/storage place to site of work as per site requirement with all cost of men, T&P, vehicle etc required for work.

DISMANTLLING WORK

Dismantling of all 3 phases of existing ACSR Zebra conductor ,all hardware fitting& conductor accessories e.g. armour rod, vibration damper,insulator string etc.of exsiting line and re-rolling of dismantled conductor on empty drum for re-use,safely transportation of all removed material to UPPTCL stores.(220kv mbd- Cb ganj line)

Dismantling of all 3 phases of existing ACSR Zebra conductor ,all hardware fitting& conductor accessories e.g. armour rod, vibration damper,insulator string etc.of exsiting line and re-rolling of dismantled conductor on empty drum for re-use,safely transportation of all removed material to UPPTCL stores.(spare ckt)

Destringing of 24 fiber OPGW cable along with hardware fittings, joint box and etc proper Re-rolling on empty drum of OPGW & safely transportation of all removed materials to UPPTCL stores etc

Dismantling of existing 220 KV Towers after cutting/opening of nuts, bolts section by section after cutting of tack welding bolts etc, as per direction of Supervising Engineer with all cost of men, T&P required for work.

Dismentalling of earlier foundation which includes Excavation, Breaking of foundation up to 2Mtr. depth and removing of concrete, Cutting, removing of stub and steel reinforcement, Backfilling, levelling and making field suitable for agriculture.

Carriage of dismentalled materials from site of work to sub-station/storage place as per site requirement with all cost of men, T&P, vehicle etc required for work.{(approx weight = 10.5 MT (Tower Weight = 4.5 MT, Conductor Weight = 6 MT & other Acessories.)}

Jagad Electrical & Fabricators (BID ID -5274645)