REPAIRS TO ROOF, JOINERY,PLUMBING,FLOORING AND OTHER CONNECTED WORKS AT OTM ACCN IN RA AREA AT CAD PULGAON

Amount

Taking down existing water proofing treatment incl PCC padding and screed bed complete of any description from RCC roof slab by scraping by means of MS scrapper patty or by any suitable tools until the concrete surface of the slab visible and removal of rubbish off the premises as directed to a distance not exc 100 mtr all as complete specified and as directed.

M&L for 50mm thick (average thickness) PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregates) laid on roof slab finished even and fair complete all as specified and as directed.

M&L for rendering 10mm thick cement plaster in CM (1:4) mixed with WPC as per manufacturer's instructions laid over roof slab finished even and smooth without using extra cement whilst the concrete is still green complete specified and as directed. Note : WPC compound shall be measured and paid separately.

Supply only Integral water proofing compound for mixing in padding concrete complete specified and as directed.

"Supply and Application of 5 Layer SHR Waterproofing Coating System a s per manufacturer application procedure on leaking concrete roof surface b y thorough surface preparation with high pressure water jet min 125 bars, opening the cracks, followed by one absorption coat o f nano-tech enhanced elastomeric waterproofing (NEEWP) emulsion having UV resistance and min. 50% solids, filling and sealing the cracks, then over coating with 2 Coats o f NEEWP + Cement mixture as waterproofing coat having +450% Elongation. The surface is then to be tested for water tightness with ponding test for min. 2 days and then top-coated with 2 Coats o f SHR Coating - pure acrylic based, UV resistant, non-yellowing, bioorganism resistant (anti-fungal, anti-bacterial) conforming to BIS STD IS 17218:2019 with Pull off Adhesion 2.8 Mpa, passes 2000 hrs accelerated durability test, suitable for all types o f cementitious surfaces, white colour, matt, surface coverage 3.25 SQM/Ltr/2 Coats, DFT 100 - 120 microns using brush, roller, airless spray gun as applicable. The application is to be done by company approved applicator only" all as instructed as per manufacturer and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L ceramic coloured matt finish tiles 7 to 8 mm thick ( square/ rectangular) area of each tile exceeding 0.18 sqm but not exc 0.38 sqm and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shade over and incl 15 mm screed bedding in cm 1:6 as in floors complete all as specified and as directed .

All as item No (07) here in before but on vertical surface as skirting over and incl 10 mm thick rendering in CM 1:4 complete all as specified.

M&L ceramic coloured matt finish tiles 7 to 8 mm thick ( square/rectangular) area of each tile exc. 0.06 sqm but n. exc, 0.11 sqm and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shade over and incl 15 mm screed bedding in cm 1:6 as in floors complete all as specified and as directed .

M&L glazed coloured ceramic tiles 450 x 300m x 7mm thick on vertical surfaces of walls as dado etc set and joined in neat cement slurry and pointed in white or coloured cement over and including 10mm thick rendering in cm 1:4 complete all as specified and as directed .

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings, complete all as specified

S&F for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc. fixed with L-type or J-type or cranked hook bolts complete all as specified and directed.

S&F for Asbestos cement onepiece plain angular ridge 6mm thick fixed with L-type or J-type or cranked hook bolts complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet one end crimbed bend 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L for Pre-painted galvalume aluminium zinc coating GI based crimbed corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, and eves board fixed with self tapping screws as specified

Dismantling ballies, hard or soft wood, any position, except in posts and struts; including taking out iron straps, bolts and nuts, etc., if type 3 or any all as per direction by Engr In Charge.

S&F structural steel work conforming to Fe-290 Gde E-165, as in roof trusses (framed), purlins, crane gantries, rails and fastenings, heavy brackets framing (Beam, tee, angle, channel or flat section) including distance pieces, cleats etc complete all as specified.

Supply & Fixing Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified & directed by EIC.

M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregates) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directe incuding necessary formwork required complete all as specified and as directed by EIC.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc, Complete all as specified and directed.

M & L 15mm thick rendering on fair faces of brick work or concrete surface in cm 1:4 to be finished even and smooth with out suing extra cemebt using WPC as per manufacturing instruction Complete all as specified and directed.

M & L 10mm thick rendering on fair faces of brick work or concrete surface in cm 1:6 to be finished even and smooth with out suing extra cement Complete all as specified and directed.

M & L rendering 5mm thick in CM 1:3 and finish the surface even and smooth without using extra cement as in ceiling, soffits of slab complete all as specified and as directed.

M & L two coats of distermpering walls with distemper oil emulsion over a coat of chalk whiting on newly plastered wall surfaces including preparation of Priming plastered and other surfaces with alkaliresistant priming paint surfaces complete all as specified and directed.

M & L two coat of cement base paint over a coat of chalk whiting including preparation of new surfaces complete all as specified and directed

M & L three coats of white wash on newly plastered ceiling surfaces including preparation of surfaces complete all as specified and directed.

Taking down steel tubing 15mm bore and connection including cleaning for re-fixing.

S & F GI tubing 15mm bore medium graded with all fitting and Fixed complete to walls and ceilings or laid in floors.

Refixing old steel tubing and connection new or old position on wall or under floor 15 mm bore of pipe complete all as specified and directed by EIC.

Taking down steel tubing 20mm bore and connection including cleaning for re-fixing.

S & F GI tubing 20mm bore medium graded with all fitting and Fixed complete to walls and ceilings or laid in floors.

Refixing old steel tubing and connection new or old position on wall or under floor 20 mm bore of pipe complete all as specified and directed by EIC.

S & F in repair 15mm bore brass CP central hole basin mixer swan neck fancy type with round spout without popup wate system with 10 mm dia , 450mm long braided hoses complete all as specified and directed.

S & F in repair 15mm bore brass CP wall mixer for provision for overhead shower with 115mm long upper bend pipe and wall flange complete all as specified and directed.

S&F in repair bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm 125gms) Make Prayag/Polytuff

S & F in repairs 15mm bore stop valve, fancy type, chromium plated cast copper alloy screwed down, high pressure, with long shank and cub (concealed type) with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed all as specified and directed .

S&F in repair CP bib taps 15mm bore dia, long body fancy type, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and directed.

S&F in repairs 15 mm dia fancy type, CP pillar taps cast copper alloy with capstan head chromium plate screwed dwon high pressure long shank and fly nut screwed for iron pipecomplete all as specified and directed.

S&F in repairs chromium plated shower roses 125mm size with or without swivel joints any size including fixing to steel pipe or union complete all as specified and directed.

S&F in repairs vitreous china wash basin white with flat back size 550x400 incl brackets and waste fitting brass chromium plated with long screwed shanks and fly nuts 32 mm dia complete all as specified and directed.

S & F in repair Vitreous China wash down water closet pan cascade type white/ ivory colour & trap including connection to drain (or out going pipe and to flushing pipe anti shyfonic pipe etc complete all as directed , Make : CERA Model No.. CNS-WHT-851P180SPP Single piece WC Campbell size 370x685x675 mm

S & F in repairs Vitreous china wash down water closet [ Bowl with Cistern for extended wall hung-WC], complete all as specified and directed. Model No CNS WHT-353SPPZ Bowl with Cistern for extended wall hung-WC

S&F in repairs vitreous china wash down water closet pan (Padestral Pattern) white with 'P' or 'S' trap excluding flushing cistern and flush pipe complete all as specified and directed.

S&F in repairs vitreous china squatting pan Orissa pattern, size 580 x 440 mm white with integral foot rest excluding flushing cistern and flush pipecomplete all as specified and directed.

S&F in repairs PVC valve less, symphonic action type flushing cistern of 10 litre capacity, low level with including bend pipe and connection to WC, brackets complete including taking down cistern complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts, length 450 mm complete all as specified and directed.

S&F PVC flexible waste pipe with PVC cap suitable for fixing to WHB waste coupling in suitable length 32 mm dia Complete all as specified and directed.

S & F in repair 15 mm health faucet chromium plated incl CP pipe upto 4 feet long and washers etc complete all as specified and directed. Make ALD-CHR-573 Jaquar

S & F in repairs brass chromium plated tubular towel rack 60cm long inclding brackets complete all as specified and directed.

S&F in repairs soap Dish Stainless Steel Stand Case Soap Holder Dish for Bathroom any type fixed to plugs with chromium plated brass screws complete all as specified.

S & F in repair stain less steel kitchen sink made out of 1mm thick sheet including stainless steel waste fittings and pvc waste pipe of 40mm dia . The over all size of sink 915x460mm and bowl size 410x330x160mm fixed with brackets or ms angle or GI pipe 15mm dia with proper arrangments to hold and fitting of sink complete all as specified and directed at site.

S & F in repairs PVC (SWR) floor trap 75mm dia of outlet incl grating and jointing with solvent cement.

S&F PTMT grating doom 125 mm dia with waste hole min. weight 40 gms.

S&F in repairs sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long.

S&F in repairs corner shelf assembly 250mm consisting of 5.5 mm thick sheet glass shelf 12cm wide and 60 cm long with chromium plated bracket guard and railing complete all as specified and as directed.

Dismantling water tanks of capacity exceeding 250 & not exceeding 500 ltrs and removing to store

S&F Rotational moulded polyethylene water storage tanks, tripple layer (cylinderical vertical with closed top) of 500 ltrs capacity hoisted and fixed in position all as specified in SSR Part-I

Dismantling water tanks of capacity exceeding 500 & not exceeding 1000 ltrs and removing to store

S&FRotational moulded polyethylene water storage tanks, tripple layer (cylinderical vertical with closed top) of 1000 ltrs capacity hoisted and fixed in position all as specified in SSR Part-I

Dismantling water tanks of capacity exceeding 500 & not exceeding 1000 ltrs and removing to store

S&F Rotational moulded polyethylene water storage tanks, tripple layer (cylinderical vertical with closed top) of 5000 ltrs capacity hoisted and fixed in position all as specified in SSR Part-I

Repair replacement of brasse fase spindal of central hole CP mixer with existing size and shape complete all as specified

S&F in repaiers ball brass valves, high pressure, with polythene float and flynut complete, screwed for 20 mm dia iron pipe or brass ferrule.

Taking down chowkats or frames with shutters (without taking off shutters) of any description exc 1.50 Sqm but n.exc 4 Sqm each all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters) of any description n exc 1.50 Sqm each all as specified and directed.

Hacking out old broken glass of any thickness/size & any description from wooden or steel frame fixed with clips/putty/wooden beading and S&F with 3.50mm thick ordinary sheet glass fixed with clips and oil putty/wooden beading completed in squares not exc 0.50 Sqm each pane all as specified and as directed.

S&F floor door stopper of aluminium alloy body and tounge anodised with hard drawn steel spring fixed in floor 140mm long overall length of cover plate complete all as spicified.

S&F in repair powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F in repair for Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

Supply & Fixing in repairs Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed by EIC.

S&F for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, all as per specified and directed.

S&F in repairs Second class hard-wood in scantlings (Timber wrought) framed and fixed, to replace old and decayed timber (including piecing, scarfing, etc., of old and new timber if required) and removing defective portions to store

M&F for 2nd class hardwood Plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads bullnosed, splayed, chamfered or rounded on one edge or face Exc 6 & n exc 13 sq.cm complete all as specified and directed.

French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats as per required finish complete all as specified and directed

S & F 35mm thick, factory made panelled door shutter (two panel), plain, framed with 2nd class hard wood lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rails and stile as per IS-1003 (Part I), kiln seasoned and chemically pressure treated complete as specified and directed.

S & F 35 mm thick, second class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauge, etc (without sash bars) fitted with cut and mitred securing beads for securing glass etc complete as specified and directed sizes of members of shutters as specified in SSR Part I Section 8 clause 8.24 (a) complete all as specified and directed.

-Ditto- as above if windows, ventilators, etc. are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24(b)

S&F solid PVC door frame of size 50mmx47mm made out of 5mm, single side prelam PVC sheet used and edges will be painted to match with printed to match with prelam sheet, reinforced with MS square tube & fixing in opening including hold fast.

S&F factory made solid PVC Moulded door shutter 28 to 30mm thick (Stiles) with 2,4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on front face & 2 mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and directed.

Supply and fix MS butt hinges, 100mm medium weight and fixed all as directed.

S & F 150 mm aluminium anodised barrel tower bolts of extruded section

S & F 150 mm extruded aluminium alloy handles , fabricated type, anodised

S&F Mild steel sliding door bolts, plate type, stove enamelled black with bright bolt not less than 12mm dia, 300mm leng, with and including a minimum of 6 bolts and nut, four on bolt plate and two on staple plate and fixed

S&F door spring with 300mm mild steel rat rail rod pattern of standard quality including roller and roller plate complete Helical spring)

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar all as specified.

M&L in repair for Granite 19/20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite complete all as specified.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc of Capacity exc 250 ltrs to not exc 500 ltrs

All as per Item No. 87 above of Capacity exc 500 ltrs to not exc 1000 ltrs

MAHARASHTRA ENTERPRISES (BID ID -3253344)

GUNJANSINGH VIJAYSINGH CHAUHAN (BID ID -3254130)

M/s Dara Constructions, Pulgaon (BID ID -3253252)

M/S Maa Durga Constructions,Pulgaon (BID ID -3253184)

I P Constructions (BID ID -3253143)

M/S Ramakant Chourasia (BID ID -3251751)

RAJ ENTERPRISES (BID ID -3253361)

Chhabra Enterprises (BID ID -3253330)

SHRI RANI SATI TRADERS (BID ID -3253393)

Bidder Name

RAJ ENTERPRISES

SHRI RANI SATI TRADERS

M/S Ramakant Chourasia

MAHARASHTRA ENTERPRISES

M/s Dara Constructions, Pulgaon

M/S Maa Durga Constructions,Pulgaon

Chhabra Enterprises

I P Constructions

Laxmi Paper Agencies

GUNJANSINGH VIJAYSINGH CHAUHAN