Loading…
Loading…
Tender ID
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
| 2 | Admitted-Fee/PreQual/Technical/Finance ADD 5 SARDAR PATEL MARG CIVIL LINES PRAYAGRAJ | PRAYAGRAJ | PRAYAGRAJ | UTTAR PRADESH | Admitted-Fee/PreQual/Technical/Finance |
Tender Value
₹3.5 L
EMD Value
₹7,000
Closing Date
30 Mar 2026, 3:00 pmClosed
Executive Engineer
C.D. Prayagraj-02, UPAVP, Pratapgarh
Boring with Submersible Pump, Water Tank and Water Cooler with Purifier at Gram Nyayalay Patti, District- Pratapgarh.
2026_UPHDB_1125230_1
454/L-11/18 Dated 12.03.2026
Open Tender
Electrical Works
Percentage
60 days
Patti
Please refer Tender documents.
2 documents required · 2 mandatory
₹590
Executive Engineer, C.D. Prayagraj-02, UPAVP.
₹7,000
30 Mar 2026
14 Mar 2026
30 Mar 2026
14 Mar 2026
30 Mar 2026
14 Mar 2026
Transportation Charges of drilling equipment including assembly and other material as required.
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in 1S: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level. all type of soil ,300mm dia
Supplying, assembling, lowering and fixing in vertical position in borewell, unplasticized PVC medium well casing (CM) pipe of required dia,conforming to IS: 12818, including required hire and labour charges,fittings & accessories etc. all complete, for all depths, as per direction ofEngineer -in-charge. 150mm dia
Supplying, assembling, lowering and fixing in vertical position in bore wellunplasticized PVC medium well screen (RMS) pipes with ribs, conformingto IS: 12818, including hire & labour charges, fittings & accessories etc. allcomplete, for all depths, as per direction of Engineer-in-charge. 150mm dia
Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per 1S:2800 (part I). 150mm dia
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 150mm dia
Supply & fixing Reduser 200 x 150 mm dia M.S.
Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 150mm dia
Gravel packing in tubewell construction in accordance with IS: 4097,including providing gravel fine/ medium/ coarse, in required grading &sizes as per actual requirement, all complete as per direction of Engineerin-charge.
Development of tube well in accordance with 1S : 2800 (part I) and IS: 11189, to establish maximum rate of useable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, including disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories efc., all as per requirement and direction of Engineer-in-charge.
Development by O.P unit including transportation.
Well logging charges
Supply of 2 HP KSB make submersible pump set model BPD 302/4+6UMA1/G 150/6/22 (SD) suitable for tube well capable of pumping clear and cold water free from chemical and directly coupled with KSB electric motor operating of 415 volts suitable for 50 cycle A.C. Supply of following duty condition 2 HP 2 stage pipe. A-Discharge of water in LPM 860 Approx size of discharge outlet in 40mm.
S/F equivalent ISI marked submersible copper cable of size 2 x 3 x 2.5 sq mm
Supply of 80mm dia M.S. column pipe of class 'C' both and socketed with heavy sockets in 3/6 meter length and one end flanged complete with interlocking arrangements.
Supply of 80mm dia M.S.column pipe clamps with nut bolts packing etc.
Supply of 80mm dia C.I. double flanged ISI mark reflex valve of upadhya or equ. Make
Supply of 80mm dia C.I. double flanged ISI mark sluice valve with hand wheel of upadhya or equ. Make.
Supply of C.I. double flanged bend of 80 mm dia i/c cost of material and labour.
Supply of 80mm dia C.I. tee heavy quality i/c cost of material.
Supply of steel wire rope of 1/2" size
S/Fof aluminium conductor PVC insulated armoured, served, sheathed cable 1100 Volts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by E/I complete in all respects The armoring of the cable shall be properly connected with the earth conductor by clamps etc. 2.5 sqmm x 2 core
Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. For 1000 litres
Providing and Installation of LIVPURE LIV-ETERNA-PREMIA 10 L RO + UF + UV + Copper + Alkaline + Mineralizer Water Purifier | NO SERVICE COST FOR 2 YEARS |10 STAGE ADVANCED PURIFICATION | SUITABLE FOR ALL - BOREWELL, TANKER, MUNICIPALITY WATER
Bule Star water cooler SWC4080SS 18 Ltr. Storage Stainless Steel.
Plumbing work of water tank Connection & water supply with water purifier etc.
stage.html
html • 0.02 MB
finance_2097377.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.24 MB
BID.pdf
Tender Documents • 2.49 MB
BOQ_2097377.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .