REPAIRS TO DIFFERENTIAL TARGETS FOR HALF YEARLY RANGE MAINT AND MISC WORK AT CHANDAN AT AF STN JAISLAMER

Amount

M & L Pre- cast cement concrete block masonry with solid blocks in PCC 1:3:6 C-1 (using 20 mm graded crushed stone aggregate ) exc 10cm in width and setting in cement mortar 1:6 including demolition of concrete block waling built in cement mortar including all quoins arches pillars, etc all as specified and directed by Engr-in-Charge.

M&L for key pointing to block walling in coarse and concrete block walling in CM 1:4 as specified and directed by Engr-in-Charge

M&L Cement concrete Type C1 1:3:6 (20 mm graded aggregate) in walls any thickness, size or upto 60 cm in height including suitable formwork, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating including demolition of cement concrete wall and pavings exc 15cm thickness (above ground level) un-reinforced all as directed by Engr-in-Charge

M & L for three coats of white wash on new concrete wall surfaces including preparation of surfaces all as directed by the Engineer – in - Charge

M & L for one coat of white wash on old concrete wall surfaces including preparation of surfaces all as directed by the Engineer – in - Charge

M & L for preparation of old painted surface of stones, concrete, asbestos cement or plastered of any description over 10 cm width or girth and applying one coat of synthetic enamel paint, all as specified & directed.

Supply and stacking new HDPE bags with inner laminated layer, white coloured empty bags shall not be less than 90 gm per bag and filled with locally available sand / soil (obtained from defence land) approximate quantity 1.2 cuft in each bag, tying properly and stacking neatly at site, in pyramid, circle or any other shape and for any height including removing old worn out, unserviceable bags (filled with sand/soil) from the stack completely and levelling the area, as directed and preparation of surface for further stacking all as specified & directed.

M&L for loosing of any type of soil to average depth 40cm-50cm by removing the stone, metal pieces of size exc 50 mm and removing the bushes from main target area depositing to a distance exc 150 m but n exc 200 m from FG target, gunnery target area including levelling surfaces after loosing the earth by mechanical earths movers or tractors or any other devices at the disaretion of contractor all as specified and directed by Engr-in-Charge.

M&L for loosing of any type of soil to average depth 20cm-25cm by removing the stone, metal pieces of size exc 50 mm, removing the bushes from main target area and upto 100 m away from the periphery/boundary of target area and depositing to a distance exc 150 m but n exc 200 m from PBT, LBT, new LBT target area including levelling surfaces after loosing the earth by mechanical earths movers or tractors or any other devices at the disaretion of contractor all as specified and directed by Engr-in-Charge.

Filling the craters in the ground of any shape or size with excavated loose soil obtained from Min of Def land within a distance of 100 m from the target areas. The craters shall be fillled using mechanical earth movers such as tractors, JCB or dozer having blade and running in rotations to shift loose soil in craters with any mechanical devices such as JCB, dozers or tractors etc at the discretion of contractor, all as specified and directed by Engr-in-charge. Note:-(i)Measurement of filling for payment shall be made as specified in PS clause.(ii)Contractor will also arrange JCB/Tractor as and when require during execution of work.Removing of all bushes in surrounding area of LBT all along external wall upto 100 mtr from wall outside and all inside LBT area including over shoot , under shoot and circle area all as specified and directed by Engr-in-Charge.

Filling the craters in the ground of any shape or size with excavated loose soil obtained from Min of Def land within distance exc 100 m but n exc 500 m from the target areas. The craters shall be fillled using mechanical earth movers such as tractors, JCB or dozer having blade and running in rotations to shift loose soil in craters with any mechanical devices such as JCB, dozers or tractors etc at the discretion of contractor, all as specified and directed by Engr-in-charge. Note:-(i)Measurement of filling for payment shall be made as specified in PS clause.(ii)Contractor will also arrange JCB/Tractor as and when require during execution of work.Removing of all bushes in surrounding area of LBT all along external wall upto 100 mtr from wall outside and all inside LBT area including over shoot , under shoot and circle area all as specified and directed by Engr-in-Charge.

M&L for marking target area using quality dry white lime powder at the rate of 500 gm per SQM uniformly spreading manually on earmarked location in strips, areas of any size around the target area complete all as specified and directed by Engr-in-Charge.

Removing of localised blockage by cleaning gully trap, floor / nahni trap, soil waste pipe, WC chocked, etc including first Manhole and removing sludge water / waste upto 50 mtr from distance and burring the same in pit complete

Cleaning of septic tank of 50 users capacity by bailing out taking out sludge and removing the sludge by pump or other mechanical means to a distance exceeding 1.5 Km but not exceeding 2.00 Km from the camp area and including removing stone patti/RCC cover slab and refixing, cleaning frequency as per requirement, complete all as directed.

Cleaning of manhole of any capacity and depth by excavating sewage wet/dry soil in foul condition and removing the waste in covered vehicles outside MD land by taking all necessary precautions and including pumping out fluid, cleaning of sludge from manhole, placing the cover of manhole in position and removing the sludge in covered van/trolley out side the MD land, complete all as specified and directed.

Cleaning of sewage line of any dia and depth by excavating sewage wet/dry soil in foul condition and removing the waste in covered vehicles outside MD land by taking all necessary precautions and including pumping out fluid, cleaning of sludge from manhole, placing the cover of manhole in position and removing the sludge in covered van/trolley out side the MD land, complete all as specified and directed.

Demolition of cement concrete (unreinforced) above ground floors not exceeding 15 cm thickness complete all as spd and dir

M & L for machine pressed precast concrete interlocking paver block rubber moulding any shape and size with grey cement and pigment cnfirming to IS-15658-2006 of 60 mm thickness, M-35 grade over and 25mm thick sand/stone dust complete all as spfd & directed by Engr-in-Charge. (Sand cusion paid separetely)

M&L for rubber moulding chequered cement concrete tiles 300mm X. 300mm x 20-25mm thick, set, jointed and pointed in near cement slurry in floor with grey cement and pigment including 20mm thick screed bed in CM (1:6) complete all as specified and directed.

M & L sand filling under floors or in cushion layer complete all as spd and dir.

M&L 75 mm thick Cement concrete 1:4:8, type D-2 ( using 40mm graded stone aggregate)as in sub-base/hard standing complete all as specified and directed.

S&F factory made SFRC manhole covers with rectangular frame of size 44"x26" MD-10 fixed at top at site complete all as spd and diredted

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening whereverrequired complete.

M&L for preparation of new surface of concrete as in road side kerb stone and applying two coat of water based synthetic enamel paint of approved different tint all as spd and complete.

S & F in repair PVC (SWR) floor trap of 75 mm outlet plain with grating including jointing with solvent cement.

S&F in repair PVC (SWR) 110 mm dia pipes single socketed in any length with rubber ring joints laid in trenches/floor or fixed to walls including digging and making good as existing.

S&F in repair 110mm dia PVC (SWR) bend any radius with access door

S&F in repair 110mm dia PVC (SWR) bend any radius.

S&F in repair 110 mm PVC (SWR) Junction single (Single T) equal or unequal with access door

S&F in repair 110mm dia PVC (SWR) vent cowl .

S&F in repair PVC (SWR) 75 mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches/floor or fixed to walls including digging and making good as existing.

S&F in repair 75 mm PVC (SWR) Junction single (Single T) equal or unequal with access door .

S&F in repair 75mm dia PVC (SWR) bend any radius.

S&F in repair 75mm dia PVC (SWR) bend any radius with access door .

S&F in repair 75 mm PVC (SWR) Junction single (Single Y) equal or unequal with access door .

S&F in Repair Stack clamps out of 50 mm by 5 mm flat iron and 16 mmm dia round iron stays.including bolts and nuts and securing ends of stays to wall or roof in dia 110mm pipe complete all as specified

S&F in Repair Stack clamps out of 50 mm by 5 mm flat iron and 16 mmm dia round iron stays.including bolts and nuts and securing ends of stays to wall or roof in dia 75 mm pipe complete all as specified

M&L for coloured industrial tiles(Jhonson endura and Equivalent to make) 300mm X. 300mm x 10 mm thick, conforing to is laid set, jointed and pointed in near cement slurry in floor with grey cement and pigment including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

M/s Fateh Enterprises (BID ID -3472792)