JOB WORK IN RESPECT OF REPAIR MAINTENANCE OF UNSV PARTS AND CONNECTED ITEMS INCLUDING PAINTING OF CHIMNEY AT MILITARY HOSPITAL MEERUT MIL STN

JOB WORK IN RESPECT OF REPAIR/MAINTENANCE OF UNSV PARTS & CONNECTED ITEMS INCLUDING PAINTING OF CHIMNEY, AT MILITARY HOSPITAL MEERUT MIL STN (a) Dismantling electrical connections, water connection of Oil Fired Incinerator and dismantling the same for repairs by removing nuts & bolts,front door including fitting and removing out o0ld defective parts and reassembling, cleaning, servicing, oiling and greasing the primary and secondary chamber for the smooth functioning, including repair to brick work complete all as specified and directed by Engineer-in-charge. Each JOB -01 (b) M & L for painting and repair to primary and secondary chamber with venturi scrubbing system by scratching old paint and preperation of surface for repainting by applying one coats of aluminium paint complete all as specified and directed by Engineer-in-charge. Each JOB -01 (c) M & L for Repair/Servicing of Oil Fired Incinerator cleaning the chimney 30 mtr long including painting of the chimney externally with one coat of aluminium paint by prepairing the surface of the chimney with applying one coat of one primer before painting complete all as directed by E IN C-Each JOB -01 (d) Dismantling electrical connection, water connection of front loading sliding system both inner and outer and dismantling the same for repair by removing nuts & bolts M.S. sheets, old defective accessories including fitting & removing out bend channels by weilding and reassembling for smooth functioning complete all as specified and directed by Engineer-in-charge. Each JOB -01 (e) Replacement of oil Fired Incinerator burner. Each JOB -02 (f) M & L for Repair/Servicing of water pump and rewinding of single phase 2 HP burnt motor, connected with the chimney inlet and water pump which is running inside the chimney of Oil Fired Incinerator. Each JOB -01 (g) M & L for rewiring of panel replacement of contactor, MCCB, switches and connected accessories of Oil Fired Incinerator. Each JOB -01(h) M & L for cleaning of water tank. Each JOB -01 (l) Replacement of the Following defective parts:- (i) Solenoid valve 15 MM 01 Nos (ii) Diffuser plate assembly MI burner 01 Nos (iii) Ignition Transformer 01 Nos (iv) Electrode front pair 01 Nos (v) Electrode rear pair 01 Nos (vi) Electrode holder 01 Nos(vii) Fuel Oil pump 01 Nos (viii) Oil Seal for fuel pump with shaft 01 Nos (ix) Mettalic Hose 40 Kg/Sq Cm 01 Nos (x) Fuel Filter name type 01 Nos (xi) Fuel filter element 01 Nos (xii) Hydraulic Cylinder Kit with lock & packing set. 01 Nos (xiii) Star Coupling assembly 01 Nos (xiv) Door Closer-01 Nos (xv) Sequential Controller 01 Nos (xvi) Photo Cell 01 Nos (xvii) Limit Switch for door with metallic roller 01 Nos (xviii) Contactor with burner I/D Fan 02 Nos (xix) Contactor for main control & Burner chamber 02 Nos Job Ch Head :- 87/460/01 (i) Funds are available to meet the cost of repairs. (ii) Old material will be the property of the Contractor credit amount. (iii) Job shall be guarantee for six months.

LAL IMLI MILLS RETAIL SHOP

TiWARI & CO.