8880/E8

Amount

Demolition of cement concrete (Un-reinforced) other than ground floor and paving nexc 15cm thick above or below GL complete all as specified and directed

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in mortar complete all as specified and directed.

Dismantalling floors hearth or wall tilling including cement mortor bedding (but not backing) removing serviceble tiles to store and rubbish off the premises complete all as specified and directed

Taking down cement plaster of any description on brick work or stone msonary wall including racking ot joints hacking for key scrubbing down with water etc. complete all as specified and directed

Taking down chowkhats or frames with shutters (without taking off shutter from frames) of sizes nexc 1.5 Sqm complete all as specified and directed.

All as item No. 5.00 above but exc 1.5 Sqm and nexc 4.0 Sqm each.

Taking up or down steel tubing 20mm dia and connection complete all as specified and directed

Taking up or down steel tubing 25mm dia and connection complete all as specified and directed

Taking down soil/ rainwater pipes (any size or pattern) including all fittings heads shoes bends swan necks etc. including cleaning and refixing or removal to store (Measured overall as fixed along the Centre Line over the Fittings and Accessories), complete all as specified and as directed.

M&L Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed.

M&L Drilling of 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre (Staggered position) in connecting places of masonry work and wooden frame work and injecting chemical emulsion into these holes till refusal or to a maximum of 0.5 litre/hole and sealing with putty or adhesive with saw dust complete all as specified and directed. Note: Chemical emulsion shall be chlorpyriphos 20% EC or equivalent diluted in kerosene

M&L for providing cement concrete type B-0 (Using 12.50mm graded stone aggregate) as in padding and benching & filleting all as specified and directed.

M&L for 10mm thick screed bed or bedding over roof surfaces when concrete is still green with and including WPC in cement mortar 1:3 complete all as specified and directed

Taking down existing membrance and Preparation of plastered surfaces of roof and laying 3mm thick APP (Atactic Polypropylene Polymer) modified prefabricated five layer, weight not less than 3.6 kg/Sqm water proofing membrane, black finished reinforced with non woven polyester matt laying over a coat of bituminous primer @ 0.40 Ltr / Sqm and two coats of Bitumen based UV reflective paint with aluminium finish over APP membrane. The membrane shall be laid using butane torch and sealing all joints etc all as specified and directed.

M&L Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and directed.

M&L for applying polymer modified cement mortar rendering 20mm thick in CM 1:3 on wall duly mixing and including polymer modifier "Nitobond SBR of M/s Forsoc Chemical India (Pvt) Ltd" or "Hind Styrene BR of Hindcon Chemical Ltd" or equivalent make of M/s Pidilite Industries @ 7 Litre per bag of cement complete finished even and smooth without using extra cement upto 4th storey complete all as specified and as per manufacturer's specification.

M&L for applying polymer modified cement mortar rendering 20mm thick in CM 1:3 on wall duly mixing and including polymer modifier "Nitobond SBR of M/s Forsoc Chemical India (Pvt) Ltd" or "Hind Styrene BR of Hindcon Chemical Ltd" or equivalent make of M/s Pidilite Industries @ 7 Litre per bag of cement complete finished even and smooth without using extra cement from 5th to 8th storey complete all as specified and as per manufacturer's specification.

M&L for applying polymer modified cement mortar rendering 20mm thick in CM 1:3 on wall duly mixing and including polymer modifier "Nitobond SBR of M/s Forsoc Chemical India (Pvt) Ltd" or "Hind Styrene BR of Hindcon Chemical Ltd" or equivalent make of M/s Pidilite Industries @ 7 Litre per bag of cement complete finished even and smooth without using extra cement from 9th to 12th storey complete all as specified and as per manufacturer's specification.

M&L rendering 15mm thick in CM (1:6) on other than fair faces of brick work or concrete surfaces even & smoth without using extra cement upto 4th storey complete all as specified and directed

M&L rendering 15mm thick in CM (1:6) on other than fair faces of brick work or concrete surfaces even & smoth without using extra cement from 5th to 8th storey complete all as specified and directed

M&L rendering 15mm thick in CM (1:6) on other than fair faces of brick work or concrete surfaces even & smoth without using extra cement from 9th to 12th storey complete all as specified and directed

M&L rendering 15mm( 10+5) thick in CM (1:4) in two layer on fair faces of brick work or concrete surfaces finished the surfaces even and fair without using extra cement and using water proofing compound in to layer i.e. 5mm thick as per manufacturer instruction upto 4th storey complete all as specified and directed

M&L rendering 15mm( 10+5) thick in CM (1:4) in two layer on fair faces of brick work or concrete surfaces finished the surfaces even and fair without using extra cement and using water proofing compound in to layer i.e. 5mm thick as per manufacturer instruction from 5th to 8th storey complete all as specified and directed

M&L rendering 15mm( 10+5) thick in CM (1:4) in two layer on fair faces of brick work or concrete surfaces finished the surfaces even and fair without using extra cement and using water proofing compound in to layer i.e. 5mm thick as per manufacturer instruction from 9th to 12th storey complete all as specified and directed

M&L rendering 5mm thick in CM (1:3) as in ceiling surfaces even & smoth without using extra cement upto 4th storey complete all as specified and directed

M&L rendering 5mm thick in CM (1:3) as in ceiling surfaces even & smoth without using extra cement from 5th to 8th storey complete all as specified and directed

M&L rendering 5mm thick in CM (1:3) as in ceiling surfaces even & smoth without using extra cement from 9th to 12th storey complete all as specified and directed

Supply only liquid water proffing compound as required

S&F for 20mm outer diameter CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

S&F for 25mm outer diameter CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

S&F in repair for 110mm bore uPVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F in repair uPVC (SWR) bend any radius 110mm bore complete all as specified and directed

S&F in repair PVC (SWR) junction single (single T) equal or unequal 110mm bore complete all as specified and directed.

S&F in repair for 75mm bore uPVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F in repair uPVC (SWR) bend any radius 75mm bore complete all as specified and directed

S&F in repair PVC (SWR) junction single (single T) equal or unequal 75mm bore complete all as specified and directed.

S&F for Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof Bore in pipe in 75mm to 150mm complete all as specified and directed Note:- (i) Unit rate quoted by tenderer shall included for use of all scaffolding, trestles, ladders, cradles etc, hoisting, lowering and protective measures etc up to twelve storeys height of bldgs.

M&L in repair for leaking water in brass/CP Wall Mixer, basin mixer, sink mixer of any make/ description/size in any position by replacing the brass spindle & washer, tightening of fittings etc & make the all system fully functional to the entire satisfaction of Engr-in-Charge complete all as specified and directed

M&L in repairs for (PVC Syphon assembly (internal kit) for any type/size/make of low level flushing cistern,tightening of fittings etc & make the all system fully functional to the entire satisfaction of Engr-in-Charge complete all as specified and directed.

M&L joint free non skid ceramic coloured tiles 8-10mm thick (square/rectangular) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm in floor set and jointed in in neat cement slurry and pointed in cloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed

All as item No. 40.00 here in before but in skirting with and including 10mm thick rendering on fair faces of brickwork in CM 1:4 complete all as specified and directed.

M&L joint free non skid ceramic coloured tiles 8-10mm thick (square/rectangular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm in floor set and jointed in in neat cement slurry and pointed in cloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed

All as item No. 42.00 here in before but in skirting with and including 10mm thick rendering on fair faces of brickwork in CM 1:4 complete all as specified and directed.

M&L glazed ceramic coloured tiles 450x300x6-7mm in vertical surfaces set and jointed in in neat cement slurry and pointed in cloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and directed

S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides fitted to cowkhats complete all as specified and directed

S&F for 2nd class hardwood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats as specified in SSR Part-I 2009.

S&F steel window with side hung shutter including projection type hinges with steel handles, and steel peg stay with glazing bars dovetailed or welded incl taking out old window complete all as specified.

M&L Steel Ventilator with frame ,top hung shutter including hinges, steel peg stay, incl taking out old ventilator complete all as specified and as directed.

S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening complete all as specified and directed.

S&F for Factory Made Solid PVC Moulded Door Shutter With Wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site complete all as specified and directed.

M&L Prelaminated particle board 18/19mm thick as in cup board shutter and Shelf, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame works as in repair complete all as specified and as directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 4mm thick sheet glass ordinary quality and glazing with oil putty in square nexc 0.5 Sqm each pane.

S&F 100mm Butt hinges, extruded brass, with brass hinge pin, bright polished, complete all as specified and directed

S&F Aluminium anodised, barrel tower bolts of extruded section 200mm long complete all as specified and directed

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy of 300mm long complete all as specified and directed

S&F Extruded aluminium alloy handles, fabricated type, anodised 150mm long complete all as specified and directed

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, 150mm long complete all as specified and directed

S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete complete all as specified and as directed.

S&F brass 4 levers lock for cupboard, grade I, size 50 mm as in repair complete all as specified and as directed.

S & F in repair for brass chromium plated long body bib cock with Wall Flange for 15 mm bore pipe complete all as specified and directed.

S & F in repair for brass chromium plated two in one tap with Wall Flange screwed for 15 mm bore pipe complete all as specified and directed

S & F in repair for brass chromium plated Pillar Tap screwed for 15 mm bore pipe complete all as specified and directed

S & F in repair for 15mm bore brass chromium plated Angular Valve with Wall Flange complete all as specified and directed.

S & F in repair for 15mm bore brass chromium plated 2 Way Angular Valve with Wall Flange complete all as specified and directed.

S & F in repair for chromium plated Health faucet with 15mm Dia, 1.2 Meter long flexible tube and wall hook with N.R.V (Back Flow Preventer)

S&F Brass chromium plated tubular towel rail, 20mm dia, D type, 60,cm long between flanges as in repair complete all as specified and directed.

S & F in repair for Plastic water closet seat, in any coloure as directed closed pattern with flat/recessed bottom, and cover and mild steel chromium plated or aluminised hinging device for pedestal pan complete all as specified and colour as directed.

S & F in repair for 15mm bore brass chromium plated Wall Mixer with Provision for Overhead Shower with 115mm long Bend Pipe on Upper Side, Connecting Legs & Wall Flanges complete all as specified and directed.

S & F in repair for 15mm bore brass chromium plated Sink Mixer, Connecting Legs & Wall Flanges complete all as specified and directed.

Supply and fixing in repair Vitreous China wash down water closet pan including P or S trap (pedestal pattern), white (excluding flushing cistern and flush pipe) including plastic water closet seat, black colour , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device and wash down water closet complete all as specified and as directed.

S&F in repair PVC connection 15mm size with PTMT nut of length 600mm complete all as specified and directed

S&F Stainless steel kitchen sink without drainage board of overall size 460mm x 405mm of bowl size 405mm x 354mm x203mm, made of 1mm thick stainless steel sheet with 32 mm CP waste coupling with brass cap rubber plug, connecting union 32mm bore PVC waste pipe (heavy duty) 90 Cm long, and bedded in cement mortar and fixed on brackets, as in repair complete all specified and directed.

M&L for preparation of new surfaces of wood and wood based materials of any descriptions not otherwise described over 10Cm width or girth & applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified.

M&L for preparation of old surfaces of wood or wood based materials of any descriptionand applying one coat of synthetic enamel paint over 10 Cm width or girth complete all as specified.

M&L for preparation of new surfaces of Steel and Steel based materials of any descriptions not otherwise described over 10Cm width or girth & applying two coat of synthetic enamel paint over a coat of red oxide on steel surfaces complete all as specified.

M&L for preparation of old surfaces of steel or steel based materials of any descriptionand applying one coat of synthetic enamel paint over 10 Cm width or girth complete all as specified.

M&L preparing newly plastered surfaces and applying 2 coat of oil bound distemper over a coat of primer including two coat of white cement based putty (approx 1.5mm thick) including rubbing with emmery paper to make wall surface smooth and even upto 4th storey complete all as specified and directed.

M&L preparing newly plastered surfaces and applying 2 coat of oil bound distemper over a coat of primer including two coat of white cement based putty (approx 1.5mm thick) including rubbing with emmery paper to make wall surface smooth and even from 5th to 8th storey complete all as specified and directed.

M&L preparing newly plastered surfaces and applying 2 coat of oil bound distemper over a coat of primer including two coat of white cement based putty (approx 1.5mm thick) including rubbing with emmery paper to make wall surface smooth and even from 9th to 12th storey complete all as specified and directed.

M&L preparing old decorated surfaces and applying one coat of oil bound distemper including white cement base putty as per requirement to fill the cracks upto 4th storey complete all as specified and directed.

M&L preparing old decorated surfaces and applying one coat of oil bound distemper including white cement base putty as per requirement to fill the cracks from 5th to 8th storey complete all as specified and directed.

M&L preparing old decorated surfaces and applying one coat of oil bound distemper including white cement base putty as per requirement to fill the cracks from 9th to 12th storey complete all as specified and directed.

M&L Complete removal of existing Treatment of old decorated Surfaces of Walls and applying Two Coats of Distemper Oil Emulsion over a coat of primer and applied over avg 1.5mm thickwater proof wall care putty including rubbing with emmery paper to make wall surface smooth and even upto 4th storey complete all as specified and directed.

M&L Complete removal of existing Treatment of old decorated Surfaces of Walls and applying Two Coats of Distemper Oil Emulsion over a coat of primer and applied over avg 1.5mm thickwater proof wall care putty including rubbing with emmery paper to make wall surface smooth and even from 5th to 8th storey complete all as specified and directed.

M&L Complete removal of existing Treatment of old decorated Surfaces of Walls and applying Two Coats of Distemper Oil Emulsion over a coat of primer and applied over avg 1.5mm thickwater proof wall care putty including rubbing with emmery paper to make wall surface smooth and even from 9th to 12th storey complete all as specified and directed.

M&L Preparing of existing old plaster surfaces and applying one coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified & directed.

M&L Complete removal of existing Treatment of old decorated Surfaces of Walls and Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces upto 4th storey complete all as specified & directed.

M&L Complete removal of existing Treatment of old decorated Surfaces of Walls and Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces from 5th to 8th storey complete all as specified & directed

M&L Complete removal of existing Treatment of old decorated Surfaces of Walls and Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces from 9th to 12th storey complete all as specified & directed.

M&L preparing newly plastered surfaces and Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) upto 4th storey complete all as specified & directed.

M&L preparing newly plastered surfaces and Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) from 5th to 8th storey complete all as specified & directed.

M&L preparing newly plastered surfaces and Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) from 9th to 12th storey complete all as specified & directed.

S&F Mild Steel Bands, Straps, Supports or Stays for Rain Water, Ventilating Pipes including Bolts, if required, Hooks (Stay), heavy, for Large Gates; Hook and Pintle Hinges, Large Hasps and Staples; Chains; Hand Made Sliding Bolts; Clamps; Holdfasts; Wall Ties; and Similar Small Articles, conforming to Fe-290 Gde E-165, complete all as specified and as directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete Fe 410-0 W Gde-E-250 quality-A complete all as specified and directed.

M&L Mild Steel Plain Black Sheet 1.0mm thick in Hearths, covering to Door Shutters, covering to steel gates, etc. cut to size edges beaded if directed, holes punched including round headed Screws Clout screws including bending, turning up, mitred angles, stopped ends, outlets, etc. as required, as in repair complete all as specified and as directed.

M and L 20mm thick granite of any type tiles machine cut in skirting dado laid over cement screed bed 15mmthick in CM 1:3 beaded and jointed with grey cement slurry and jointed with white cement ement mortor (1:2) using marble dust with admixture to match with shade of granite upto 4th storey complete all as Specified and directed

M and L 20mm thick granite of any type tiles machine cut in skirting dado laid over cement screed bed 15mmthick in CM 1:3 beaded and jointed with grey cement slurry and jointed with white cement ement mortor (1:2) using marble dust with admixture to match with shade of granite from 5th to 8th storey complete all as Specified and directed

M and L 20mm thick granite of any type tiles machine cut in skirting dado laid over cement screed bed 15mmthick in CM 1:3 beaded and jointed with grey cement slurry and jointed with white cement ement mortor (1:2) using marble dust with admixture to match with shade of granite from 9th to 12th storey complete all as Specified and directed

M&L for cutting down plants / trees of girth not exc 25 cm & area not exe 01Sqm each from roof tops /sides of external walls of buildings, chajja, wall junctions, junctions of of rain water / soil /waste vent pipes including taking out roots entered in wall/slab surfaces and making good the surfaces including repairing the CI/GI/PVC joints of affected locations by applying TUFALO (herbal medicine ) and making good to suit the adjoining surfaces using PCC type 1:2:4, type B-0 or cement mortar 1:2 complete all as per manufacturer instructions complete all as specified and as directed.

Taking down point wiring (light, fan, socket and power complete including fixtures and fittings such as switches ceiling roses, pendents , regulators, sockets, light fittings etc and making good distrubed surfaces of walls, floors, etc. including cleaning all and specified and directed.

M&L for point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm FRLH/S in and including concealed PVC conduit 20 mm dia medium duty ISI marked with all necessary fittings with sunken cast iron /pressed steel terminal box ,flush to surface and 3 mm thick laminated sheet top cover for mounting switches including 1.5 sq mm FRLH/S PVC insulated unsheathed stranded copper conductor as earth lead and connected to common earth doly for one light / ceiling fan/exhaust fan/bell controlled by one switch complete including cutting, chasing the surface and then making good the same in CM 1:3 to finishing the match surface complete all as specified and directed by Engr- in-charge.

All as per item No.105.00 mentioned here-in-before but 3 pin 5 amps socket out let point same board with other switches of cables of 1.5 sqmm

All as per item No.105.00 mentioned here-in-before but for one 5 amp switch socket combination on independent board with cables of 1.5 sqmm size

All as per item No.105.00 mentioned here-in-before but using 2.5 sq mm size stranded copper conductor cable for one 16 amp switch socket outlet on independent board including 2.5 sq mm FRLH/S PVC insulated unsheathed stranded copper conductor as earth lead and connected to common earth doly complete all as specified and directed by engineer incharge.

All as per item No.105.00 mentioned here-in-before but using 4.0 sq mm size stranded copper conductor cable for one AC starter including 4.0 sq mm FRLH/S PVC insulated unsheathed stranded copper conductor as earth lead and connected to common earth doly complete all as specified and directed by engineer incharge.

All as per item No.105.00 mentioned here-in-before but for one point controlled by two, two way swiches with cables of 1.5 sqmm size complete all as directed and specified

M&L for point wiring with PVC insulated unsheated stranded copper conductor cable FRLH/S of size 1.5 sq mm in and including PVC casing caping of required width with all necessary fittings with sunk cast iron /pressed steel terminal box and 3 mm thick laminated sheet top cover for mounting switches including 1.5 sq mm FRLH/S PVC insulated unsheathed stranded copper conductor as earth lead and connected to common earth doly for one light / ceiling fan/exhaust fan / bell controlled by one switch , one way complete all as specified and directed by Engineer incharge.

All as per item No.111.00 mentioned here-in-before but 3 pin 5 amps socket out let point same board with other switches of cables of 1.5 sqmm

All as per item No.111.00 mentioned here-in-before but for one 5 amp switch socket combination on independent board with cables of 1.5 sqmm size

All as per item No.111.00 mentioned here-in-before but using 2.5 sq mm size stranded copper conductor cable for one 16 amp switch socket outlet on independent board including 2.5 sq mm FRLH/S PVC insulated unsheathed stranded copper conductor as earth lead complete all as specified and directed by Engineer-in-Charge.

All as per item No.111.00 mentioned here-in-before but using 4 sq mm size stranded copper conductor cable for one 16 amp switch socket outlet on independent board or for AC Starter including 4 sq mm FRLH/S PVC insulated unsheathed stranded copper conductor as earth lead complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of PVC conduit 20 mm dia medium duty in existng wiring with accessories like MS tee, bend, elbow of high quality material size 12-20 Each complete all as directed.

S&F in replacement of PVC casing caping in existng wiring alongwith accessories like MS tee, bend, elbow of high quality material size 12-20 Each complete all as directed.

Supply and fix in repairs accessories like wooden gutka,clip 0.5-2.0 inch screw complete all as specified and directed.

S&F lamp holder insulated body with back plate for batten fittings complete all as directed.

S&F in repair lamp holder insulated body with back plate for batten fittings complete all as directed.

S & F switch piano flush type 5/6 Amps 230V AC one way complete all as specified and directed by Engineer-in-Charge.

S & F in repair switch piano flush type 5/6 Amps 230V AC one way complete all as specified and directed by Engineer-in-Charge.

S&F socket outlet 3 pin 5/6 Amps 230 volts flush type. complete all as specified and directed by Engineer-in-Charge.

S&F in repair socket outlet 3 pin 5/6 Amps 230 volts flush type complete all as specified and directed by Engineer-in-Charge.

S&F bell push flush type 5 Amps 230V complete all as specified and directed by Engineer-in-Charge.

S&F call bell, ding dong AC 230 volt single pole (ding dong type) complete all as specified and directed by Engineer-in-Charge.

S&F in repair call bell, ding dong AC 230 volt single pole (ding dong type) complete all as specified and directed by Engineer-in-Charge.

S&F ceiling rose surface bakelite 65x50mm single phase three terminal complete all as specified and directed by Engineer-in-Charge.

S&F in repair ceiling rose surface bakelite 65x50mm single phase three terminal complete all as specified and directed by Engineer-in-Charge.

S&F switch socket combination 2in 1 3 pin 6 Amps 230 volts flush type complete all as specified and directed by Engineer-in-Charge.

S&F in repair switch socket combination 2in 1 3 pin 6 Amps 230 volts flush type complete all as specified and directed by Engineer-in-Charge.

S&F switch socket combination multipurpose 3 pin 10 and 20 Amps one switch complete all as specified and directed by Engineer-in-Charge.

S&F in repair switch socket combination multipurpose 3 pin 10 and 20 Amps one switch complete all as specified and directed by Engineer-in-Charge.

S&F ceiling fan regulator electronic Step type, solid state, 240 volts, complete all as specified and as directed

S&F in repair ceiling fan regulator electronic Step type, solid state, 240 volts, complete all as specified and as directed

S&F ceiling fan regulator socket type, solid state, 240 volts, complete all as specified and as directed

S&F in repair switch socket combination with box 2in 1 3 pin 6 Amps 230 volts flush type complete all as specified and directed by Engineer-in-Charge.

S&F in repair switch socket combination with box multipurpose 3 pin 10 and 20 Amps one switch complete all as specified and directed by Engineer-in-Charge.

S&F fix LED fitting 1x20W, 220V AC wall/roof mounted LED batten with polycarbonate housing and intergrated electronic driver with efficancy of 100 lumen/watt connecting up with twin core flexible copper cable from ceiling rose complete all as directed

S&F fix LED fitting 1x10W, 220V AC wall/roof mounted LED batten with polycarbonate housing and intergrated electronic driver with efficancy of 100 lumen/watt connecting up with twin core flexible copper cable from ceiling rose complete all as directed

S & F LED bulb 9Watts 240V 50Hz 6500K b22 base in bulb holder complete all as specified and directed by Engineer-in-Charge.

S&F building security light pressure die cast housing with individual LEDs with modular secondary optics security light luminaires 35 watt LED with suitable dia light grade GI pipe bent to shape of 45'' 1.5 mtr long and nuts bolts including fixing arrangement after taking down old unserviceable one complete all as specified and directed by Engineer-in-Charge.

Supply and fix plug top 3 pin16A 240V Easy to carry, Non flammable & Durable Heavy duty , nickel plated brass terminals Long lasting polycarbonate plastic material complete all as specified and directed by Engineer-in-Charge.

S&F plug and socket in sheet metal enclosures with two pin and earth plug and socket complete with and including MCB SP 20 Amps 240 volts heavy duty all as including taking down of old unsv one specified and as directed by Engr-in-charge

S&F A C starter unit consisting of one 25 Amp capacity starter, one 240 V 25 Amps 10 KA SPN MCB, one 25 Amps socket and one 25 Amps plug top prewired with 6M modular box with cover plate and frame complete all as specified and directed by Engineer-in-Charge.

S&F in repair A C starter unit consisting of one 25 Amp capacity starter, one 240 V 25 Amps 10 KA SPN MCB, one 25 Amps socket and one 25 Amps plug top prewired with 6M modular box with cover plate and frame complete all as specified and directed by Engineer-in-Charge.

Taking down unserviceable rusted / damaged MCB DBs of any type and way along with any type MCB and keeping serviceable MCB in safe custody in re-use in the work and making good to the distubed surfaces of walls etc. complete all as specified and as directed.

S&F MCB TPN DB made up with sheet metal, phosphorised, power coated, neutral link, earth bar and din rail, 4 way TPN with 200 amps rated bus bar, 415 volts complete all as specified and as directed.

S&F MCB SPN DB made up with sheet metal double door, phosphorised, power coated, neutral link, earth bar and din rail, 4 way with 200 amps rated bus bar, 240 volts complete all as specified and as directed.

S&F sheet metal enclosure for DB's when MCBs to be used 8 way single pole and neutral double door with 200 amps rated bus bar complete including connection all as specified.

S&F MCB 63 Amps 415 Volts FP with rapturing capacity 10KA including taking down of old one complete all as specified and directed by Engineer-in-Charge.

S&F MCB 6 to 32 amps 240 volts 10KA single pole complete all as specified.

Fixing only MCB 6 to 32 amps 240 volts 10KA single pole complete all as specified. Note:- Serviceable MCBs shall be obtained from item No. 147.00 mentioned here-in-before.

S&F in repair MCB 6 to 32 amps 240 volts 10KA single pole complete all as specified.

S&F MCB DP 40 to 63 amps 240 volts 10KA breaking capacity complete all as specified.

Fxing only MCB DP 40 to 63 amps 240 volts 10KA breaking capacity complete all as specified. Note:- Serviceable MCBs shall be obtained from item No. 147.00 mentioned here-in-before.

S&F in repair MCB DP 40 to 63 amps 240 volts 10KA breaking capacity complete all as specified and directed by Engineer-in-Charge.

S&F sub main wiring two run of single core PVC insulated unsheathed stranded copper conductor of size 4 sqmm & one run of PVC insulated unsheathed stranded copper conductor of size 4 sqm as earth lead drawing into and including rigid and non metalic PVC conduit of size 20mm dia including taking down old unsv complete all as specified. Note: Two run of 4 sqmm cable and one run of 4 sqmm cable will be measured as single length.

Taking down and opening out the ceiling fan/wall mounted upto1200/1400 mm sweep for inspection, removing bush / bearing, cleaning of bush / bearing, replacement of unserviceable / worn out bearing / bush, shaft, removing burnt out coils from the slots, cleaning and repairing of slots complete including materials like split pin, rubber reel etc and reassembling and refixing of fan complete with and including minor Spares, if any required complete all as specified and as directed. Note : Spare parts shall be measured & paid separately.

Rewinding of ceiling fan motor with super enamelled copper winding wire of suitable size & varnishing including testing of fan after rewinding complete all as specified.

Supply only ball bearing suitable for 1200/1400mm sweep Ceiling fan of any make.

Supply only capacitor of 2.5 mfd for Ceiling Fan

Supply only gun metal bush of suitable size for ceiling fan of sweep 1200mm/1400mm as per existing one complete.

Supply only shafts for ceiling fan suitable for 1200mm sweep

Supply only PVC connector for Ceiling Fan

Supply only nuts, bolts, for Ceiling fan

Supply only fan blades for Ceiling fan suitable for 1200mm sweep/1400mm sweep.

M&L for painting of ceiling fan/wall fan of any size and sweep complete with synthetic enamel paint by spraying including filling with cavities with filler, after cleaning all dust etc complete all as specified and directed by Engineer-in-Charge.

Taking out the BLDC Ceiling fan/ wireless remote PCBA (controller bd) and repair the same and refixing the same in original position either in fan or remote complete all as specified and directed by Engineer-in-Charge.

Supply only BLDC PCBA (controller Bd)

Supply only BLDC Ceiling Fan Stator Ferrite Magnet Ring 12/14/16 Poles

Supply only BLDC rotor magnetic coil of 12/14/16 poles

Supply only plastic 12 pole stamping ring

Supply only remotes for BLDC ceiling fan.Make as per sample

Taking down unserviceable ceiling fans and supplying and fixing new ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete with all the connection as directed.

Taking down unserviceable wall fans and supply and fixing wall fans 400mm sweep power input 60Watts min speed 1350RPM min air delivery 85 CMM 240V 50Hz complete with electrical connection ccomplete all as specified and directed by Engineer-in-Charge.

Taking down and opening out the exhaust fan upto 400 mm sweep for inspection, removing bush / bearing, cleaning of bush / bearing, replacement of unserviceable / worn out bearing / bush, shaft, removing burnt out coils from the slots, cleaning and repairing of slots rubber reel etc. reassembling and refixing of fan complete including all as specified and as directed.

Rewinding of fan motor with super enamelled copper winding wire of suitable size & varnishing including testing of fan after rewinding complete all as specified.

M&L for painting of exhaust fan of any size and sweep complete, in situ with approved colour synthetic enamel paint by spraying including filling with cavities with filler, one coat after cleaning all dust etc.

Supply only bush suitable for exhaust fan.

Supply only ball bearing suitable for exhaust fan.

Supply only capacitor 3.5 mfd for exhaust fan.

Supply only capacitor 1 mfd for exhaust fan.

Taking down unserviceable exhaust fans and supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete as directed.

Taking down unserviceable exhaust fans and supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete as directed.

S&F in replacement louvers of exhaust fan upto the size of 400mm sweep upto four storey building complee including arrangement of scaffolding for fixing of louvers with all nuts, bolts and washers and finished properly with cement work as per existing complete all as specified and as directed by engr in charge

Taking down unserviceable electric water heater and supply and fix electric water heater, storage type steel body with MS tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with pressure reducing valve and all accessories such as safety valve, thermostate, NRV, connection piece etc. complete as directed.

Taking down carefully unserviceable geyser of any type and make from site after disconnections of water & electrical connections & carrying out to MES store yard for inspection and thereafter to workshop for repair & replacement of components such as heating element, thermostate, cable, neon lamp, plugtop, outer casing, plates & repair work to apparatus plate, copper tank,split plate including de-scaling of water tank etc and carrying back to MES store yard for testing and refixing at site and making water & electrical connection on completion and all as directed.

M&L for painting of geysers 25 ltrs at site/at workshop duly with one coat of synthetic enamel paint (white) including preparation of surfaces with brush, cleaning agents as required of 25 Ltr capacity and its front with best quality paint all as directed and specified by Engr-in-Charge

M&L for brazing/gas welding of inner container copper of 25 ltrs /50 ltrs capacity and any make and making leak proof all as directed.

Supply only following spares for geysers:- Heating element 1.5KW including rubber gasket ISI marked suitable for existing geysers.

Heating element 2.00KW including rubber gasket ISI marked suitable for existing geysers.

Thermostate for suitable existing geyser of 25/50 litrs capacity

Chromium plated stainless steel geyser connection pipe of length not less than 60cm including washers for incoming & outgoing hot & cold water connections as specified and directed by Engr-in-charge

Apparatus plate assembly complete for geyser of capacity 25/50 litrs capacity.

Outer casing made out of MS sheet suitable for geyser of capacity 25 litrs.

Storage tank fabricated from MS sheet gauge suitable for geyser of capacity 25 ltrs of make as specified and approved.

Split plate bottom cover made out of MS sheet suitable for 25 litrs capacity geyser

Split plate top cover made out of MS sheet suitable for 25 litrs capacity geyser

Insulating material glass wool suitable for 25 litrs capacity geyser

Element holding brass stud suitable for 25 litrs capacity geyser

Element holding MS clamp suitable for 25 litrs capacity geyser

Fusible metal plug suitable for 25 litrs capacity geyser

Neon lamp round/square with connection lead

Brass Non return valve suitable for 25 litrs capacity geyser

Brass Pressure Reducing valve of minimum Pressure : 0.9Mpa suitable for 25 litrs capacity geyser

Supply & fix in repairs 1.5 Sqmm FRLSH Copper conductor coil in existing concealed conduit 1100 volts grade complete all as specified and directed.

Supply & fix in repairs 2.5 Sqmm FRLSH Copper conductor in existing concealed conduit 1100 volts grade all as specified and directed.

Supply, installation, testing of LT bus bar panel (0.4x0.3x0.1m) factory assembled indoor type, wall mounted, dust vermin proof suitable for 415V, 50Hz, 3 phase, 4 core supply, CPRI approved, factory assembled having busbar chamber with insulated aluminimum bus bar 100 amps installation on insulator's double door with provision of one four pole incomer and 3 two pole outgoing duly wired by soild copper conductor not less 4 sqmm powder coated locking arrangement complete all as specified

Supply, installation testing and commisisioning bus bar LT panel, outdoor type weather proof, IP-54 platform mounted duly suitable for 415V, 50HZ, 3 Phase, 4 wire supply, CPRI approved factory assembled with insulated bus bar of 200 amps insulated an insulator's, double door rubber liming, locking arrangment powder coated internally and externally, mounted an angle iron frame of 40x40x4mm 30cm high above ground level and 15cm embedded in ground with and including PCC blocks 1:2:4 type CI of size 40x30x30cm compete all as directed

Supply and fix in repairs /replacement of self adhesive PVC Electrical Insulation tape of size 1.8cmx6.5mx0.125mm mix colour box in a packet of 12 roll complete all as specified and dircted. Note- Insulation tape should be ISI marked.

Supply anf fix in repair hylum sheet 3mm thick (ISI Marked) of 1 foot x 1foot size complete all as directed.

M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.00 mm thick burried in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to GI strip 4 mm as earthing lead by means of bolts, nuts, check nuts and washers of GI or steel, GI strip proected by 40 mm bore light grade GI pipe and other end connected to earth test point as directed including funnel with watering pipe 20 mm bore light grade galvanised iron, wire mesh, charcoal or coke common salt laid in alternative layer of 15 cm (complete thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1, 50 mm thick pre-cast RCC (1:2:4) type B-1 normal mix cover slab reinforced with 8 mm dia TMT bar 10 cm c/c bothways and single handle of 10 mm dia round bar including necessary excavation, earth work etc. in soft / loose soil and disposal pf soil to a distance n. exc. 50 m and necessary testing on completion all as shown in electrical plate No. 3 MES Schedule Part-I complete all as specified and directed.

KT CONSTRUCTIONS (BID ID -3498121)

MASTER BUILDERS (BID ID -3492093)

M/S J S ENTERPRISES (BID ID -3492553)

NUPUR CONSTRUCTION (BID ID -3492507)

M A ENTERPRISES (BID ID -3491649)

SPECIAL CONCRETE AND CONSTRUCTION CO. (BID ID -3491798)