Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.8 LAccepted-AOC C O GENERAL DAIRY VILLAGE BARAGAON SRI GANGANAGAR 335 001 | GANGANAGAR | RAJASTHAN | 335001 | L1 | Accepted-AOC Being First Lowest | |
| 2 | L2₹37.8 L+₹97,358.40 (2.64%)Rejected-Finance | L2 | Rejected-Finance Other Than First Lowest |
Tender Value
₹38 L
EMD Value
₹76,000
Closing Date
27 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Lalgarh Jattan
GE Lalgarh Jattan
PROVN OF CERTAIN MINOR AND REVENUE WORKS AT LGJ MIL STN
2023_MES_621082_1
8934-45/GE/23-24
Open Tender
Civil Works
Item Rate
180 days
GE Lalgarh Jattan
As per tender document
8 documents required · 8 mandatory
₹500
GE Lalgarh Jattan
₹76,000
Yes
13 Jan 2024
29 Sept 2023
31 Oct 2023
29 Sept 2023
27 Oct 2023
13 Oct 2023
Amount
Excavation in trenches n.exc. 1.5m wide and n.exc 1.50 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc. 10 Sqm on plan and n.exc 1.5 m in depth and getting out in getting out in soft / loose soil all as directed.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning soft soil, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.
M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate in foundation, filling & mass concrete or filling of sunken complete all as specified and directed by Engineer-in-Charge
M&L for brickwork with fly ash bricks, of old size bricks, straight or curved exc. 6 m mean radius built in CM (1:6) all as specified and directed.
M&L brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, buit in CM (1:4) all as specified and directed.
M&L for damp proof course 40 mm thick in Cment concrete 1:2:4 type B-0 to horizontal or vertical surfaces including necessary formwork all as specified and directed.
M&L for reinforced cement concrete, type B1 1:2:4 using 20 mm graded stone aggregates in lintels upto 1.5m span, cills steps, seismic and other similar bands, plinth courses, copings, bed plates, and the like including weathering, slightly rounded or chamfered angles and throating, incl formworks all as specified and directed. Note : Reinforcement shall be measured and paid seperately.
M & L for Formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, ressummers,lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exc 200 mm thick (horizontal or sloping) rough finish surface of concrete flat all as specified and directed.
M&L for reinforced cement concrete (design mix) M-25 using 20mm graded stone aggregrate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like; all as specified and directed. Note : Reinforcement shall be measured and paid seperately.
S&F for TMT bars (Fe-500D) 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.
,---ditto--- as per item No 11 above but 5 mm dia and over upto and including 10mm dia in stirrups, spacers and binders all as specified and directed.
Supply and Fix mild steel works as roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or any flat section) including distance pieces, cleats etc conforming to Fe-410-W (Gde-E-250) quality A, Complete all as specified and directed by EIC.
Returning, filling in, including spreading levelling including watering & well ramming in layers n. exc 25 cm any type of soil complete all as specified and directed by Engineer-in-Charge
Removing excavated materials n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed by Engineer-in-Charge
M&L for sand filling in floors or in foundations including watering and consolidation all specified and directed
M&L for hardcore with broken stone or boulders of gauge n exc. 63mm, deposited, spread and levelled in layers n exc.15cm thick,watered and rammed to a true surface complete all as specified and directed. Note : Compacted thickness shall be measured for payment purpose
M&L for 75 mm thick PCC (1:4:8) type D2 using 40mm graded stone aggregate as in sub base below floors all specified and directed.
M&L for 25 mm thick PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate as in floor or laid under floor all specified and directed.
M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectengular) area of each tile exc 0.06 Sqm but not exc 0.11Sqm in floor over and including 15 mm thick screed bedding in cement mortar 1:6, set and jointed in neat cement slurry and pointed in coloured cement to match the floor all as specified and directed.
M&L for glazed ceramic coloured tiles of size 450 x 300 x 7 mm thick on vertical surfaces such as skirting / dados over and including 10 mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed in coloured cement to match the floor all as specified and directed.
M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 20 mm thick screed bed in CM 1:6 complete all as specified and directed.
M&L for 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded mechanically crushed stone aggregate as in plinth protection finished even and smooth without using extra cement with & including 10 mm wide, 30 mm deep joints at the rate of 3.00 mtr centre to centre and at every turning & filling the joints with bitumen & sand mixture complete all as directed.
M&L for rendering, 15 mm thick on brick work or concrete surfaces in cement mortar 1:6 on wall finished even and smooth without using extra cement all as sepecified and directed.
M&L for rendering, 15 mm thick on brick work or concrete surfaces in cement mortar 1:4 finished even and smooth with all as sepecified and directed. Note : WPC shall be measured and paid seperately
M & L rendering 5 mm thick in cement mortar (1:3) on fair faces of concrete surfaces of ceiling finished even and smooth without using extra cement complete all as specified & directed by Engr-in-charge.
Supply only liquid water proofing compound complete all as specified and directed by Engr-in-charge.
M&L for three coats of white wash on newly plastered surfaces of walls incl preparation etc. complete all as specified and directed by Engr-in-charge.
M&L for three coats of white wash on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed by Engr-in-charge.
M&L for preparation of new plastered surface of walls and applying two coats of cement base paint over coat of primer complete all as specified & directed
S&F for factory made steel ventilators all as per IS 1038/83, with top hung shutters including hinges, steel peg stay, complete all as specified & directed by Engineer-in- charge.
M&L for preparation of new steel surface of any description not otherwise described over 10 cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-charge.
S&F 4.0 mm sheet glass ordinary quality and glazing with oil putty or with beading in square n.exc 0.5sqm in each pane complete all as specified and directed by Engr-in-charge.
Supply and fixing of Fibre glass Reinforced plastic (FRP) door frame of required colour of cross-section 90mm x 45mm having single ribate of 32mm x 15mm to recieve shutter of 30mm thick including laminated door frame moulded with fire retardant grade unsaturated polyster resin and chopped strand mat(CSM) also door frame laminated shall be 2mm thick and shall be filled with suitable wooden block of 2nd class hard wood, frame shall be covered with fibre glass from all sides. MS stay flat iron 25mm x 3mm shall be provided at the bottom to steady the frame complete all as specified and as directed by Engineer-in- charge.
Supply and fixing of 30 mm thick glass fibre reinforced plastic (FRP) paneled door shutter conferming to IS:14856-2000 of required colour and made with fire retardant grade unsaturated polyster resin,moulded to 3mm thick FRP laminated for forming hollow rails and style with suitable second class hardwood timber block inside at required places for fixing of fittings,cast molithically with 5mm thick FRP laminated for panels including fixing to frames,complete all as specified and as directed by Engineer-in- charge.
S&F for 100 mm long butt hinges, extruded aluminium alloy with galvanised mild steel hings pin, anosied and fixed complete all specified and directed.
S&F for 200 mm long aluminium anodised barrel tower bolt, of extruded sections complete all as specified and directed.
S&F for 150 mm long aluminium anodised handle, cast type complete all as specified and directed.
S & F Vitreous China urinals, half stall complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; grating and Union for discharge pipe complete all as specified and directed.
S & F in repair Vitreous China urinals, half stall complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; grating and Union for discharge pipe complete all as specified and directed.
S&F vitreous china squatting pan Orissa pattern size 580 x 440 mm white with integral foot rests excl flushing cistern but including 'P' trap set in and provision of lime concrete bedding complete all as specified and directed by Engineer-in-Charge.
S&F vitreous china white wash down water closet pan, padestal pattern, white, including fixing bolts, but excluding flushing cistern and flush pipe and connection to drain (or out going pipe) etc. complete and making good to floor all as specified and directed
Supply and fix plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, seat and cover for water closet (European type) complete all as specified.
S&F vitreous china wash hand basin coloured Flat back of size 580x450mm, including 32mm dia chromium plated waste coupling long screwed shank and fly nut, flanged end bedded in red led cement and other end fixed and PVC waste pipe including cutting for and pinning in ends of brackets in CM 1:3 all as specified .
S&F in repair vitreous china wash hand basin coloured counter top (pedestal pattern) of size 560x450mm, including 32mm dia chromium plated waste coupling long screwed shank and fly nut, flanged end bedded in red led cement and other end fixed and PVC waste pipe including cutting for and pinning in ends of brackets in CM 1:3 all as specified . .
S&F PVC valve less, syphonic action type flushing cistern,10 ltrs capacity low level, white, with inlet ball valve, float, handle flush pipe 32mm dia, for low level cistern of polyethylene of low or high density or PVC, and connection to pipes complete all as specified and directed by Engineer-in-Charge.
S&F pillar tap, fancy type, cast copper alloy chromium plated with capston head, screwed down high pressure with or without lettered with long screwed shank and fly nuts, screwed for iron pipe of 15 mm bore complete all as specified and directed.
S&F bib tap 15mm bore cast copper alloy chromium plated long body fancy type with capston head and cup screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed by Engineer-in-Charge.
S&F 15mm bore stop cock cast copper alloy screwed down, high pressure, with capastan head screwed both ends to iron pipe complete all as specified and as directed. Note : Min wt of stop cock should not be less than as per SSR part-I
S&F PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.
S&F brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed by Engr-in-charge.
S&F 15 mm dia galvanised steel tubing medium grade including necessary fittings like sockets, tees, elbows, reducers, unions etc fixed to walls / ceiling complete all as directed.
S&F 20mm dia galvanised steel tubing medium grade including necessary fittings like sockets, tees, elbows, reducers, unions etc fixed to walls / ceiling complete all as directed.
S&F gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of 20mm bore complete all as specified and directed
S&F 110 mm dia PVC SWR pipe, single socketed in any length with rubber ring joints fixed with clamps to walls complete all as specified and directed
S&F 75 mm dia PVC SWR pipe, single socketed in any length with rubber ring joints fixed with clamps to walls complete all as specified and directed
S&F 110 mm dia PVC (SWR) bend any radius complete all as specified and directed by Engr-in-charge.
S&F 75 mm dia PVC (SWR) bend with access door any radius complete all as specified and directed by Engr-in-charge.
S&F 110 mm dia PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed by Engr-in-charge.
S&F PVC vent cowl 110mm complete all as specified and directed by Engr-in-charge.
S&F PVC (SWR) floor trap, 75 mm dia with grating including jointing with solvent cement etc complete all as specified and directed by Engr-in-charge.
M&L PVC (SWR) gully trap 125/110 mm, fixing and jointing with solvent cement all as specified and directed.
Cutting into existing manholes for connection of new drain making pipes and rendering cutting out existing benching & forming branch channel in PCC 1:2:4 type B1 smooth finished & forming benches as reqd etc for 150 mm bore all as directed.
S&F for Rotational moulded polythene water storage tank 500 ltr capacity vertical with closed top hoisted and fixed in position all as specified in SSR part-I. all as directed and including 20 mm bore PTMT float valve, connection nipple 2 Nos complete all as specified and directed..
Supply and laying DWCPE (SN8) 180 (OD)/163 (ID) mm diameter drain pipes as per IS-16098 (Part-II), laid in trenches on PCC bed to required slope, including all accessories/fittings, jointing and tested complete all as specified and as directed by Engineer-in-Charge Note : (PCC & Earth work shall be measured and paid separately).
M&L for PCC 1:2:4 type B2 using 40mm graded aggregates as in benching / haunching of manholes including forming channels including necessary formwork etc complete all as specified and directed by Engr-in-charge.
M&L precast cement concrete 1:2:4 type B1 using 20mm graded stone aggregate and set cement mortar 1:6 as in cover slabs (for manholes etc,) chajjas, shelves and similar articles with plain faces complete all as specified and directed by Engr-in-charge.
M & L for soakage wall of size 1.8 m dia x 3.00 m effective depth of soakage well excavation, in any type of soil, foundation in PCC 1:3:6 wall of honey combed massonry with top ring of M-25 concrete including intercepting chamber and screen chamber made of brick masonary in CM RCC cover slab in M-25 SFRC cover interconnecting pipe of RCC/DWC complete fillet with brick bats all as specified and directed (Dr No BTD-804)
Surface excavation N.exc. (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil.
M&L for 100mm thick PCC (1:4:8) type D2 using 40mm graded stone aggregate as in sub base below floors all specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet including Ridge 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified & directed by Engr-in-Charge.
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compa ction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed by Engr-in-charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises all as specified and as directed.
M & L for dark shade double charged Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and directed.
M & L for dark shade double charged Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, on to vertical surfaces . set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:4 complete all as specified and directed.
Taking down chowkhats or frames exc 1.5 sq. m but n.exc 4.0 sq. m each with shutters (without taking off shutters from the frame) complete all as specified and directed.
S & F for providing Factory Made 30 mm thick 100 % Solid WPC (Wood polymer composite) laminated flush Door Shutter of required size comprising of virgin PVC resin of K value 57-60 (Suspension grade), calcium carbonate and natural fibers( wood powders/rice husk/wheat husk) and non toxic additives, made from Extrusion process WPC foam sheet single (inner) with having minimum desity not less than 650 kg/cum manufactured by an ISO 9001-2015 certified company, having good screw holding capacity (screw withdrawal strength of 2000N (face) & 1100 N( edge), minimum compressive strength of 50 N/mm2, Modulus of elacticity 850N/mm2 and resistance of spread of flame of class A category with property of being termite/Borer free, water/moisture proof and fire retardant, WPC to be laminated with PVC foil of miniumum 14 microns thick of approved design pasted on both faces of shutter and fixing stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws complete all as specified and directed by Engineer-in-charge, material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen/balcony doors
S & F for Factory Made single extruded WPC (Wood polymer composite) solid door/windows/ceosetory windows & other frames/ chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers ( wood powders/rice husk/wheat husk) and non toxic additives (minimum toxicity index of 12 for 100 grms) fabricated with miter joints after applying PVC solvent cement and screws having minimum frame density of 750 kg/cum, screw withdrawl strength withdrawal strength of 2000N (face) & 1100 N( edge), minimum compressive strength of 58 N/mm2, Modulus of elacticity 900N/mm2 and resistance of spread of flame of class A category with property of being termite/Borer free, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/ssdash fasterners of required dia and length complete all as per direction of Engineer-in-Charge.
S & F in repair 12 mm thick toughened glass with etching (Engraving pictures, names or fighures of any type or any size) for glazed door including hydraulic spring, stay peg, hinges, fixed cilps, rubber gasket etc including stainless steel locking arrangement, 250 mm stainless steel decorative door handle both side with all accessories complete all as specified & directed by Engineer-in-charge
S & F in repair vitrieous china EWC cascade type white including cistern, seat cover, inlet accessories connection to drain (or outgoing piep) and to flushing pipe, antisyphonage pipe etc., all as complete all as specified & directed by Engineer-in-charge
S & F 10 mm toughened glass for urinal partition complete all as specified & directed by Engineer-in-charge
S&F in repair bib cock 15mm bore with flange cast copper alloy chromium plated fancy type screwed for iron pipe brass ferrule etc complete all as specified and directed by Engneer -in-Charge
S&F in repair CP brass stop/angle valve fancy type 15 mm bore cast copper alloy screwed down high pressure fancy type fixed complete all as specified and directed by Engr-in-charge.
S&F in repair hand soap dispenser wall mounted fancy type complete all as specified and directed by Engineer-in-Charge
S & F in repair brass chormium plated toilet paper holder, recessed type complete all as specified and directed by Engineer-in-Charge
S&F in repair chromim plated fancy type health faucet with 1 mtr tube & hook complete all as specified and directed by Engneer -in-Charge
S&F in repair stainless steel chromium plated jet spray (butter fly or ''L'' bend) suitable for EWC including 1m tube and necessary nut bolts complete all as specified and as directed by Engineer-in-charge.
Taking down 15 mm dia steel GI tubing including all connected fittings of any dia and in any position including cleaning for re fixing the serviceable pipe complete all as specified and directed by Engineer-in-Charge.
Taking down 20 mm dia steel GI tubing including all connected fittings of any dia and in any position including cleaning for re fixing the serviceable pipe complete all as specified and directed by Engineer-in-Charge.
E/M Portion Supply and fix 30 watt x 4 All in one mini mast solar light, with high efficiency premium solar integrated street light semi mast with built in Mono crystalline panel, Lithium Ferro Phospate (LiFePO4) Battery, MPPT charge controller and PIR sensor integrated system with 07 mtr octogonal pole all as specified and directed by Engineer-in-Charge. Make : Bajaj, CG, Havelss or Equivalent Note : Fixing of mini mast light in PCC is included in this item and No extra payment to be made on this account.
Taking down carefully copper/aluminium point wiring (light, socket or power) complete (fittings such as switches, ceiling roses, pendants, regulatos, sockets etc to be measured separately), and making good disturbed surfaces of walls, floors etc to match with existing surfaces.
M&L for concealed Point wiring for One light/fan/Ext fan point controlled by one, one way switch controlled by one, oneway switch with single core PVC insulate, unsheathed multistranded copper conductor cable of size 1.5 sq.mm (FRLS) drawn in and including electrical grade PVC conduit 20 mm dia concealed on wall/ceiling/floor including PVC insulated unsheathed earth wire with multi stranded copper conductor of size 1.5 sq.mm(FRLS) including MS shunk sheet metal box with 3 mm thick bakelite plastic laminated sheet top cover with brass counter shunk screws with washer complete all as specified. Note - quoted rate shall include making good to the disturbed surfaces including plastering and painting to match with the existing colour.
,---ditto-- all as per serial item No. 94 above, but for 5 Amp socket outlet (with 2 pin out let of 5 Amp) on same board
,---ditto-- all as per serial item No. 94 above, but for 5 Amp socket outlet (with 2 pin out let of 5 Amp) on independent board
,---ditto-- all as per serial item No.94 above, but wiring with 4 sq.mm multistranded cable and earth wire with copper conductor of size 4 sq.mm for 15 amps power point complete all as specified and directed by Engr-in-charge.
Supply and fix switch, piano type, Single pole, one way 5 Amp rating 230/250 volts grade on top covers (catered in point wiring above)
Supply and fix switch, piano type, Single pole, one way 15 Amp rating 230/250 volts grade on top covers (catered in point wiring above)
Supply and fix socket out let multipurpose use, 3 pin 5 Amp (with 2 Pin out let of 5 Amp also) flush mounting type, 230/250 Volts grade, on top covers complete all as specified and directed
Supply and fix socket out let multipurpose use, 3 pin 15 Amp (with 3 Pin out let of 5 Amp also) flush mounting type, 230/250 Volts grade, on top covers complete all as specified and directed
Supply and fix ceiling rose, PVC/poly carbonate isolated body surface bakelite 65 x 50 mm three terminals
S & F LED light fitting 1 x 20 W, 230 V integral sleek polycarbonate LED Channel with white acrylic cover incl making connection complete.
Supply and fix lamp holder insulated body with back plate for angle/batten fitting with LED of 09 watt complete all as specified and as directed.
Supply & Fix exhaust fan, steel body AC single phase 230V of size 300 mm sweep with blades and frame and louvers all as specified and directed by Engineer-in-Charge
S & F in repair factory made sheet metal distribution boards, SPN, 4 way double door; protection class IP-30 suitable for mounting MCB/MCCB conforming to IS- 8623 with 200 Amps rated copper bus bar suitable for working on 240 volts AC supply complete all as specified & directed.
Supply and fix MCB SP 240 volt 6-32 amp 10KA complete all as specified and as directed.
Supply and fix MCB DP SP 240 volt 40 amp 10KA complete all as specified and as directed.
S & F MCBs 10 KA confirm to IS-8828 :1996, IEC-898 : 1995 rupturing capacity of SP & N 32 Amp
M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of earth plate at a depth of not less than 1.5 metre below ground level, earth plate surrounded by 15cm thick and packed layer of charcoal dust and common salt, connected to earth lead of GI wire 4 mm dia (8 SWG) by means of bolts, nuts and washers of the earth wire.galvanised iron or steel and thimbles and other end of the earth wire connected to earthing test point and protected by galvanised iron pipe light grade 15mm dia and water pipe 20mm dia GI light grade with funnel and wire mesh, PCC chamber in cement concrete (1:2:4) type B-1 and CI cover with frame all as shown in electrical plate No. 3 of MES Schedule Part-I of SSR-2009. Notes :- (i) 20 mm dia GI pipe for watering to be provided with a socket and plug and should be 10 cms above ground level. (ii) Outer edge of earth pit will be 1 metre away from the outer edge of PCC chamber. (ii) GI wire upto DBs earth connection is included in this item. (iii) Water pipe shall be provided in slanting position
S & F LED building security light fitting 35/45 watt with epoxy powder coated sheet aluminium housing, with epoxy powder coated CRCA sheet steel grey tray, clear acrylic cover and accessories complete incl street light bracket made out of 25 mm dia GI medium grade pipe 0.6 mtr long complete with 2 sets of FI clamps made out of 30x5 MS flat & nuts, bolts & washer including painting to clamp with two coats of aluminium silver paint over a coat of primer after taking down old u/s one.
M&L sand cushioning, with dry and clean fine locally available sand for underground cable 8 cm before laying cable and 15cm after laying and punned to 18cm after laying of cable complete all specified and directed by Engineer-in-Charge.
M&L brick protection with sub class'B' brick laid flat across the cable complete all as specified and directed by Engr-in-Charge.
S & F XLPE insulated armoured heavy duty electric cable with Aluminium conductor 1100 volt grade 25 Sqmn 3.5 core complete all as specified and directed by Engr-in-Charge.
Supply and fix fresh air fan 230 mm sweep 240 V 50 Hz plastic body complete with louvers and including making hole in wall fixing complete all as specified and directed by Engr-in-Charge.
Material & Labour for Sub Main Wiring with two run single core 6 Sqmm PVC insulated unsheathed (FRLS) cable with stranded copper conductor drawn in PVC conduit & accessories Suitable size with and including 4 Sqmm copper green colour earth wire all as specified and directed by Engr-in-Charge. NOTE-two run of 6 sq.mm & One run of 4 sq.mm & One run of PVC conduit with accessories shall be measured as One length.
Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ
Dashmesh Construction Company
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .