Loading…
Loading…
Tender Value
₹7.7 Cr
EMD Value
₹15.3 L
Closing Date
30 Sept 2026, 3:00 pm3d left
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
WORKS
14 conditions · 2 needing a document upload
IRGCC 2022 TENDER FORM SECOND SHEET & ACS 1 CLAUSE 10.22.Financial Eligibility Criteria: (As Per IRGCC Clause 10.2)10.2.Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where:V= Advertised value of the tender in Crores of Rupees.N= Number of years prescribed for completion of work for which bids have been invited.The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover.The Tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.10.3 Bid Capacity: The tender/technical bid will be evaluated based on bid capacity formula detailed as Annexure-VI.PLEASE READ ALL IRGCC TENDER FORM SECOND SHEET & ACS 1 CLAUSE 10.2 TO EVALUATE THE FINANCIAL ELIGIBILITY CRITERIANon submission of Annexure-VIB, along with copies of Audited Balance Sheets dulycertified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet by the tenderer shall result in summarily rejection of his / their bid" ( Click here to download Format)
IRGCC 2022 TENDER FORM SECOND SHEET & ACS 1 CLAUSE 10.1 1.Technical Eligibility Criteria: (As Per IRGCC Clause 10.1) (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: 1Three similar works each costing not less than the amount equal to 30% of advertised value of the tender OR 2Two similar works each costing not less than the amount equal to 40% of advertised value of the tender OR 3One similar work costing not less than the amount equal to 60% of advertised value of the tender Note for Item 10.1: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate. PLEASE READ ALL IRGCC TENDER FORM SECOND SHEET & ACS 1 CLAUSE 10.1 TO EVALAUTE THE TECHNICAL ELIGIBILITY CRITERIA
Defination of Similar Work :- Any Signalling Work of EI/PI/RRI/IBH/ABH/ LC Gate Interlocking/Track circuit works/Axle counter works/ RDPMS etc.
28 conditions · 2 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The definition and calculation of local content shall be inaccordance with the Make in India policy as incorporated in thetender conditions. Please refer to Make in India Policy attachedherewith for detailed information.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Complete tender document including NIT details, schedule, conditions is attached herewith. Tenderers are requested to read the tender document thoroughly before quoting their rates.
Tender will be governed as per latest standard Indian Railways General Conditions of Contract, works 2022 and their all correction slips. Tenderer are requested to read the latest IR GCC works 2022 and their all correction slips before submission of their offer and must be submit the all Annexures, documentary evidences, data as mentioned in IRGCC Works 2022 and their all correction slips.
All the documents in support of the Minimum Eligibility Criteria including Letter of Acceptance/Work Order, Documents showing the nature and total value of work, Completion report, Audited balance sheet, Attested certificate from Government employer, Copy of I.T. return etc. should be submitted along with the bid. Railway reserves the right to make or not to make any further reference to the tenderer regarding the fulfillment of the Minimum Eligibility Criteria and to award the tender only on the basis of the documents submitted by the tenderer along with the bid. The tenderer will not have any claim on this account.
Rights of the Railway to deal with Tender: The authority for the acceptance of the tender will rest with the Railway. It shall not be obligatory on the said authority to accept the lowest tender or any other tender, and tenderer(s) shall neither demand any explanation for the cause of rejection of his/ their tender nor the Railway to assign reasons for declining to consider or reject any particular tender or tenders. If the tenderer(s) deliberately gives / give wrong information in his / their tender or creates / create circumstances for the acceptance of his / their tender, the Railway reserves the right to reject such tender at any stage.
If the bidder submits Bid security in the form of Bank Guarantee "The original Bank Guarantee should be delivered in person receive and dispatch section of this office (i.e. DRM office, Signal & Telecom, Branch, West Central Railway, Jabalpur) before closing date for submission of bids (i.e. excluding the last date of submission of bids)
1.As per Railway Boards letter no. 94/CE-I/4 Pt.17 dated: 13.08.2012, for all work contract valuing more than Rs.10 Crore, "two Packet System" of tendering mandatorily be followed. 2.As per Railway Boards letter no. 2002/CE-I/CT/37 JV Pt.VIII dated: 14.12.2012, "JOINT VENTURE FIRMS" shall now be applicable to the works tenders of value More than Rs. 10 Crores. 3.This is highly technical work to be executed only by qualifying MEC stipulated in tender document as per IR GCC 2022 with similar work issued vide CSTE office letter no. WCR/N- HQ/150/Wks/Policy/14 dated: 03.08.2018. No any relaxation in MEC will be given for any consideration. Firm failing to satisfy the MEC will be treated as ineligible firm. (IF MEC APPLICABLE) 4.In terms of railway board's letter no. 2020/CE- I/CT/3E/GCC/Policy dated: 30.12.2020, If the bidder is banned for submission of bids on the date of closing of tender, such bid, even if received, shall be treated as invalid while evaluating the bids. 5.Change of inspection authority may be done by engineer- incharge at a later date. 6.In case of more than one valid & eligible L-1 bidders, tender may be awarded to tenderer having higher bid capacity. In case bid capacity is also the same, tenderer having done more value of similar work in last three previous financial years and current financial years up to the date of the opening of the tender, may be selected for the award. Instructions with respect to bid capacity will follow. Supporting document for this may be clearly uploaded by tenderer with their offer. 7.The provisions contained in railways circulars, JPO's regarding penalties will be applicable for works requiring digging. 8.As per railway boards letter no. 2017/CE- I/CT/9 dated: 31.05.2023 "for all contracts costing more than Rs.5 crore, Contractor's e-MB is mandatory and contractor's e- MB should be part of Tender Document. All other provisions of railway boards letter no. 2017/CE-I/CT/9 dated: 31.05.2023 will be followed. (If applicable)
West Central Railway Joint procedure order for undertaking earth work in the vicinity of electrical, signalling, telecom cables issued vide no. WCR/N-HQ/110/JPO Corrsp/Sig.-99 dated: 08.01.2024 instructed vide GM (S&T) JBP letter no. JBP/N.H.Q.120/Policy/T-1/Part-V dated: 10.01.2024 and procedure for undertaking digging work in the vicinity of signalling, electrical and telecommunication cables issued by railway board vid eno.2021/Tele/5(2)/3-Part(1)(3425647) dated 12.06.2023 or any other latest JPO by railways will be applicable in this contract
It is responsibility of the contractor during execution the work near the track, that all safety precautions will be taken like; Safety Jacket, wearing of Safety Shoes and Helmet to avoid any type of causality.
SPECIAL CONDITIONS AND SCOPE OF WORK OF THIS WORK WILLBE AS PER CONDITIONS MENTIONED IN TENDER DOCUMENT ATTACHED HEREWITH
RATES: The rates (if accepted) quoted by the bidder will be inclusive of all taxes & duties, GST livable by state/central government/local government. Compliance of GST Act/Rule and any Correction /Modification issued by Railway Board/Government in Regard to GST act shall be binding to the contractor.
COMPLIANCE OF LABOUR LAWS & REGISTRATION: Contractor should comply with the latest applicable labour laws. You will be advised to contact Regional Labor Commissioner, Jabalpur for necessary action. Contractor is to abide by the provisions of Payment of Wages ACT & Minimum Wages ACT and all other Labour provisions as per IRGCC Works and all its Advance correction slips
SHRAMIK KALYAN. : You will be advised to register yourself on Railway Board website www.shramikkalyan.indianrailways.gov.in & upload the required information regarding the awarded tenders to bidders by this office.
ENGINEER INCHARGE: Sr. Divisional Signal & Telecom Engineer/Co. /JBP will be the Engineer in-charge of the work
FINANCE OFFICER: Sr. Divisional Finance Manager / Jabalpur will be the Associate Finance Officer
CONSIGNEE: Consignee depot as mentioned in tender documents attached herewith or as nominated by Engineer In- charge will be Consignee depot for supply materials. Sectional SSE In-charge of the respective station or as nominated by engineer in charge will be site supervisor for the execution of the work. Measurement of execution of work will be certified by sectional SSE/SIG duly endorsed by respective ADSTE's and measurement will be recorded in MB by Consignee depot as mentioned in tender documents attached herewith. Sectional ADSTE will be Field Engineer for the execution work of respective section.
TEST CHECK: 20% check shall be certified by the officer as mentioned in tender documents in Measurement Book.
SUBSTITUTE: The Engineer-in-charge of the work may substitute these officers/supervisors at a later date as per Railway requirement.
If any document/information submitted by you found false/incorrect/forged in any manner then action will be taken as per codal provisions of railways.
IRGCC works 2022, Part-I, clause 7 i.e. 7. "Right of Railway to Deal with Tenders: The Railway reserves the right of not to invite tenders for any of Railway work or works or to invite open or limited tenders and when tenders are called to accept a tender in whole or in part or reject any tender or all tenders without assigning reasons for any such action. In case if tender is accepted in part by Railway administration, Letter of Acceptance shall be issued as counter offer to the Tenderer, which shall be subject to acceptance by the Tenderer. However, performance guarantee, security deposit and other financial transactions in the tender will be as per total contract value evaluated by e- tender module of IREPS and no any relaxation on performance guarantee, security deposit and other financial transactions will be given on account of banning of any/some items for procurement in this tender.
S&T work in connections with Enhancing and Strengthening of Earthing arrangement & Provision of surge protection device for signalling equipment's at STN/ LC/ IBH/ Relay Hut on Jabalpur division of West Central Railway.
JBP-N-SIG-TENDER-2026-34~WCR
JBP-N-SIG-TENDER-2026-34
Open
Works - General
12 Months
Jabalpur, Madhya Pradesh
₹0
₹15.3 L
3 Sept 2026
3 Sept 2026
16 Sept 2026
240 items across 4 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 65,76,567.4 | ||
| — | 4425.00 | — | — | ||
| Supply of Copper tape for BRC (25X2) mm. INSPECTION BY RITES/TPI. | — | — | — | 9,35,622 | |
| — | 59.00 | — | — | ||
| Supply of Copper bus bar 25 mm x 6 mm x 300 mm INSPECTION BY CONSIGNEE. | — | — | — | 75,846.86 | |
| — | 59.00 | — | — | ||
| Supply of Copper bus bar 25 mm x 6 mm x 200 mm INSPECTION BY CONSIGNEE. | — | — | — | 66,865.29 | |
| — | 1500.00 | — | — | ||
| 1 Core, PVC Insulated Copper Cable with Conductor Area 10 sq. mm. INSPECTION BY CONSIGNEE. | — | — | — | 2,10,000 | |
| — | 1500.00 | — | — | ||
| Supply o f flexible cable single c o r e multistrand copper conductors,1x16 sq.mm. INSPECTION BY CONSIGNEE. | — | — | — | 2,68,485 | |
| — | 1500.00 | — | — | ||
| Supply o f flexible cable single core multistrand copper conductors, 1x25 sq.mm INSPECTION BY CONSIGNEE. | — | — | — | 4,05,000 | |
| — | 3500.00 | — | — | ||
| Supply of 35 sqmm Multi-strand single core FRPVC insulated copper cable as per IS:694 for connecting main earth electrode to MEEB. INSPECTION BY RDSO. | — | — | — | 17,50,000 | |
| — | 180.00 | — | — | ||
| Supply of Earth Electrode assembly as per Drg. No. S&T/CON/KOTA/Earthing/01. INSPECTION BY CONSIGNEE | — | — | — | 2,15,575.2 | |
| — | 1000.00 | — | — | ||
| Supply of Earthing Powder (Earth Enhancement Material) as per Para 8.2 of RDSO Spn.No.RDSO/SPN/197 or latest Note :-Minimum weight of Bag should be of 10 KG. INSPECTION BY CONSIGNEE. | — | — | — | 40,170 | |
| — | 1540.00 | — | — | ||
| Supply of 50x6 mm Galvanized steel tape for inter connecting the earth pits. Inspection by RITES/TPI. | — | — | — | 7,11,141.2 | |
| — | 5.00 | — | — | ||
| Supply of Lightning Strike Recorder LSC 6 digit shall be weather proof type. It should have 6 digit event count & the capacity to count smallest strike (3KA). It should be voltage sensing type counter. So that it will register nearby strikes & static discharge due to induction effect as per IS 2309:1989. INSPECTION BY CONSIGNEE. | — | — | — | 69,314.95 | |
| — | 500.00 | — | — | ||
| Supply of 25 sq mm copper pin type terminal (copper lugs) with insulation to ascon/action CAT NO ACP-251.Make : Dowells or similar. INSPECTION BY CONSIGNEE. | — | — | — | 11,800 | |
| — | 464.00 | — | — | ||
| Supply of 16 Sq.mm ring type copper lugs Dia.-10 mm . Make : Dowells or similar. INSPECTION BY CONSIGNEE | — | — | — | 4,640 | |
| — | 696.00 | — | — | ||
| Supply of 10 Sq. mm ring type copper lugs of Dia.-10 mm . Make : Dowells or similar. INSPECTION BY CONSIGNEE | — | — | — | 9,444.72 | |
| — | 464.00 | — | — | ||
| Supply of 06 sq mm copper pin type terminals (Copper Lugs ) with insulation .Make : Dowells or similar. INSPECTION BY CONSIGNEE | — | — | — | 1,791.04 | |
| — | 2000.00 | — | — | ||
| Supply of Ring terminal copper lugs: 2.5Sq.mm. Make : Dowells or similar . INSPECTION BY CONSIGNEE | — | — | — | 9,200 | |
| — | 18.00 | — | — | ||
| Supply of Crimping Tool 16 mm to 35 mm INSPECTION BY CONSIGNEE | — | — | — | 39,420 | |
| — | 18.00 | — | — | ||
| Supply of Crimping Tool 1.5 Sq mm to 16 Sq mm . Make : Dowells or similar . INSPECTION BY CONSIGNEE | — | — | — | 19,565.82 | |
| — | 1000.00 | — | — | ||
| Supply TVS Diode, 1500W peak pulsecapability at 10/1000micro-sec, Bidirectional, reverse standoff voltage = 8.55V, maximum clamping voltage = 14.5V at 42.1A, maximum reverse leakage current of 10 micro-Amp at 8.55V. (Littelfuse/Bourns/EPCOS make) INSPECTION BY CONSIGNEE. | — | — | — | 39,850 | |
| — | 3000.00 | — | — | ||
| MOV, 20mm dia, for 25V AC/31V DC supply with maximum clamping voltage of 77V at 20A and peak single pulse(8/20us) rating of 2KA. EPCOS, Bourns or Little fuse make. (S20K25:24VDC) INSPECTION BY CONSIGNEE | — | — | — | 44,670 | |
| — | 2000.00 | — | — | ||
| MOV, 20mm dia, for 40V AC/56V DC supply with maximum clamping voltage of 135V at 20A and peak single pulse(8/20us) rating of 2KA. EPCOS, Bourns or Little fuse make. (S20K40:48VDC) INSPECTION BY CONSIGNEE | — | — | — | 51,000 | |
| — | 2000.00 | — | — | ||
| MOV, 20mm dia, for 11V AC/14V DC supply with maximum clamping voltage of 36V at 20A and peak single pulse(8/20us) rating of 2KA. EPCOS, Bourns or Little fuse make. (S20K11:12VDC) INSPECTION BY CONSIGNEE | — | — | — | 49,560 | |
| — | 1000.00 | — | — | ||
| MOV (S20K50:60VDC) 20mm dia, for 50V AC/65V DC supply with maximum clamping voltage of 135V at 100A and peak single pulse(8/20us) rating of 6.5KA. EPCOS, Bourns or Littelfusemake. INSPECTION BY CONSIGNEE | — | — | — | 24,850 | |
| — | 4000.00 | — | — | ||
| MOV (S20K95:110VDC) 20mm dia, for 95V AC/125V DC supply with maximum clamping voltage of 250V at 100A and peak single pulse(8/20us) rating of 6.5KA. EPCOS, Bourns or Littelfuse make. INSPECTION BY CONSIGNEE | — | — | — | 98,720 | |
| — | 3000.00 | — | — | ||
| MOV (S20K115:110VAC) 20mm dia, for 115V AC/150V DC supply with maximum clamping voltage of 300V at 100A and peak single pulse(8/20us) rating of 6.5KA. EPCOS, Bourns orLittelfuse make. INSPECTION BY CONSIGNEE | — | — | — | 81,030 | |
| — | 1000.00 | — | — | ||
| Supply of PVC flexible cable multistrand wire copper conductor cross section 6 sq mm as per IRS (S)76/89 or latest. INSPECTION BY CONSIGNEE | — | — | — | 95,000 | |
| — | 8.00 | — | — | ||
| Supply of Digital earth tester 4 terminal, range 0-10/100 ohm with Ni-Cd rechargeable battery with accessories . (Waco WACODET mid Digital Earth Resistance Tester or similar). INSPECTION BY CONSIGNEE | — | — | — | 60,380.32 | |
| — | 5.00 | — | — | ||
| — | 100.00 | — | — | ||
| — | 200.00 | — | — | ||
| — | 600.00 | — | — | ||
| — | 5000.00 | — | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
3JPO10-1-2412-6-23.pdf
ATTACHMENT
1GCCWORKS2022ACS1TO12.pdf
ATTACHMENT
MAKEININDIAPOLICY.pdf
ATTACHMENT
eBGletterdated16.06.2026.pdf
ATTACHMENT
4Letterforshramikkalyanportal_1.pdf SHRAMIK KALYAN LETTER
ATTACHMENT
TD-34-Earthing.pdf
ATTACHMENT
ANNEXUREforschB-8SchD-6.pdf
ATTACHMENT
nx2.pdf
ATTACHMENT
nx.pdf
ATTACHMENT
4Letterforshramikkalyanportal_1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .