Renovation or Interior work including Civil, Electrical, Fire alarm, IT or AV and VC, HVAC, Furniture etc. in Conference room at 6th floor

INDIAN NATIONAL SCIENCE ACADEMY

1 DISMANTALLING Work

Dismantling tile work in floors and roofs laid in cement mortar including

stacking material within 50 metres lead.

15.23.2 For thickness of tiles above 25 mm and up to 40 mm SQM 120.00 113.35 13,602.00

Dismantling tile work in Wall dado laid in cement mortar including stacking

material within 50 metres lead.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing

4 15.57 and false ceiling including disposal of unserviceable material and stacking SQM 88.98 56.35 5,014.02

of serviceable material with in 50 meters lead as directed by Engineer-in-

Dismantling doors, windows and clerestory windows (steel or wood) shutter

5 15.12 including chowkhats, architrave, holdfasts etc. complete and stacking

within 50 metres lead:

CIVIL & INTERIOR WORKS

SITC of modular carpet of approved model and shade and made with 100%

nylon 6/6.6 tufted textured tiles of minimum 500mm x 500mm in size,

stain resistant, anti microbial, and having colour fastness to water, fastness

6.00 MR to light, rubbing fastness and castor chair suitability as per relevant SQM 105.00 3,422.58 3,59,371.11

standard for heavy commercial usage, with 100% PVC free Backing with

having average density 6000 oz/cu. yd. or more,Nominal total thickness of

5.9mm, and Pile weight – 16-18 oz/ sq yard. Material shall be CRI GREEN

UPVC certified,

Windows and shall

: Supply andhave recycled

Fixing content

of Tripple complying

Track/ to GRIHA

Tripple Channel

UPVC Windows, DGU/ Sandvich Glasses (6 mm Reflective Glass + 10 mm

Air Gap + 6 mm Plain Toughned Glass) on two tracks and SS Mesh on One

Track, complete as per the requirement of engineer in charge.

GYPBOARD CEILING :- Providing and fixing false ceiling at all height

including providing and fixing of frame work made of special sections,

power pressed from M.S. sheets and galvanized with zinc coating of 120

gms/sqm (both side inclusive) as per IS : 277 and consisting of angle

8 12.45.1 cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and SQM 124.00 1,355.80 1,68,119.20

37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with

dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange

of cleat fixed to the angle hangers of 25x10x0.50 mm of required length

with nuts & bolts of required size and other end of angle hanger fixed with

intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200

Digitally signed by AMIT

Providing and fixing suspended celing, Size 1200X2500X12.5mm round

random perforation G8/15/20 with 9.9% perforation, NRC upto 0.55 :

Round rectangular perforation of glass-fibre reinforced gypsum material,

which includes providing and fixing GI perimeter channels of size 0.55 mm.

Thk. having one flange of 20 mm and another flange of 30 mm and web of

27 mm along the perimeter of the ceiling, screw fixed to brick wall/

partition with help of nylon sleeves and screws, at 610 mm centers. The

suspended GI intermediate channels of size 45 mm,0.9mm thk with two

flanges of 15 mm each from the soffit at 900 mm centers with ceiling angle

of width 25mm x 10mm x 0.55mm thk fixed to soffit with GI cleat and steel

expansion fasteners. Ceiling section of 0.55 mm thk having web of 51.5mm

& two flanges of 26mm each with lips of 10.5mm are fixed to the

GYPSUM PARTITIONING:- Providing and fixing partition upto ceiling

height consisting of G.I. frame and required board, including providing and

fixing of frame work made of special section power pressed/ roll form G.I.

sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of

floor and ceiling channel 50mm wide having equal flanges of 32 mm and

0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm

centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or

suitable anchor fastener or metal screws with nylon plugs and the studs 48

mm wide having one flange of 34 mm and other flange 36 mm and 0.50

mm thick fixed vertically within flanges of floor and ceiling channel and

The boards are to be fixed to the frame work with joints staggered to avoid

through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having

two flanges of 9.5 mm each) to be provided at the horizontal joints of two

boards, fixed to the studs using metal to metal flat head screws, including

jointing and finishing to a flush finish with recommended jointing

75 mm overalljointing tape, partition

thickness angle beads

mm thick x 25skin

9.105.1 Glass Reinforced Gypsum (GRG) plaster board conforming to IS: 2095: SQM 115.00 2,131.10 2,45,076.50

LAMINATE CLADDING- P/F 1mm thick laminate including 4 mm thick

MDF, on an existing Plywood surface.

Providing and fixing of 1.25mm/1.50 thick laminates (as per IS:2046-1995,

DIN EN 438, NEMA LD3-2005 quality standard), made out of urea free

13 thermosetting resign treated Kraft as core material and design paper as a SQM 60.00 3,490.88 2,09,452.80

finish surface. water boiling test reflect the water immersion through

permissible increase on thickness and mass <0.60% , Laminated should

accomplish Antibacterial properties ( under JIS Z2801:2000, manufactured

Supply and fixing of 12mm HD PET panels with density of 2400GSM form

44 colour options with customized pattern (Grooving/CNC from our library)

as per the designers requirement, the panel shall be made from-

-100% polyester fiber, with up to 70% recycled fiber. size of panel

G:21 and also Non-toxic, non-irritant, and fire-compliance with safety

standards confirm as per BS 476 Part 6 (Fire Propagation) & Part 7 (Surface

spread of flame) for interior applications. ASTM E84 class A(Available on

orders), ASTM D 2859, BS 5852 PART 1, EN 13501 part 1B,s1,d0.

Digitally signed by AMIT

Electrical Work

Wiring for light point/ fan point/ exhaust fan point/ call bell point

with 1.5 sq.mm FRLS PVC insulated copper conductor single core

cable in surface / recessed medium class PVC conduit, with modular

switch, modular plate, suitable GI box and earthing the point with 1.5

Supplying and fixing following modular switch/ socket on the existing

1.24 modular plate & switch box including connections but excluding modular

plate etc. as required.

Supplying, Installation, Testing & Commissioning of LED Recessed/surface

Down lighter (Round / square/ Rectangular) COB Type of following body

material and construction as per IS : 10322 with driver as per the

requirement with Driver efficiency >85%, Operating voltage AC 140-270

Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal

surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10%

, P. F.≥0.95, IP20, CRI >80 , UGR (Unified Glare Rating) < 19, Flicker free

(flicker should be below 5 %), life time (LED, Driver & electrical circuitry),

life time of minimum 50000 Burning Hours with, 70% of initial Lumen

maintained till life ends , CCT 3000°K / 4000°K / 5700°K /6500°K (As per

ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum

power consumption should not more than the specified rating and Fixture

8 - 10be of relevant BIS standard. Manufactures Word Mark/ Name

Supplying, installation, Testing & Commissioning of Panel light 2x2 ft., of

following body material and construction as per IS : 10322 with driver as

per the requirement with Driver efficiency >85%, Operating voltage AC 140-

270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C,

internal surge protection of 2.5 KV with Short & Open circuit protection,

THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19,

Flicker free, (flicker should be below 5 %), life time (LED, Driver &

8.6 electrical circuitry), of minimum 50000 Burning Hours with, 70% of initial

Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11

report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin),

SDCM(Standard Deviation Colour Matching) <3, Maximum power

consumption should not more than the specified rating and Fixture shall be

of relevant BIS standard. Manufactures Word Mark/ Name Engraved/

Embossing/ Screen printing on housing. complete in all respect i/c external

connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor

single core cable and earthing etc. as required with Minimum 5 year OEM each 10.00 2,060.00 20,600.00

Digitally signed by AMIT

GI Raceway & Junction boxes ( Raceway on floor shall be of aluminium

Providing and fixing 2 mm thick steel sheet factory fabricated post

galvanized raceway with internal partition/compartmentized of the

following sizes including providing removable 3 mm thick GI cover,

knock out holes and fixing accessories earthing with 8 SWG copper

earth wire complete as required including floor supports, bends, access

boxes and raceway

mm deep cross over as per specification and site RM 30.00 1,290.20 38,706.00

Supplying and fixing following way, single pole and neutral, sheet steel,

2.3 MCB distribution board, 240 V,

on surface/ recess, complete with tinned copper bus bar, neutral bus bar,

earth bar, din bar,

Supplying and fixing of following ways surface/ recess mounting, vertical

type, 415 V, TPN MCB distribution

2.5 board of sheet steel, dust protected, duly powder painted, inclusive of 200

A tinned copper bus bar,

common neutral link, earth bar, din bar for mounting MCBs (but without

Supplying and fixing following rating, four pole, (three phase and neutral),

415 volts, residual current circuit breaker (RCCB), having a sensitivity

2.15 current 30 mA in the existing MCB DB complete with connections, testing

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve,

2.10 miniature circuit breaker suitable for inductive load of following poles in the

existing MCB DB complete with connections, testing and commissioning etc.

Wiring for circuit/ submain wiring alongwith earth wire with the

1.14 following sizes of FR PVC insulated copper conductor, single core

cable in surface/ recessed medium class PVC conduit

Supply, Installation, Testing and Commisioning of Recessed luminaire

with LED (Light Emitting Diode), system power: 28 W, luminous flux

of 2800 lm, colour temperature of 6000 K, Neutral white, 230 V

constant current driver, 70% of luminous flux after 50,000 operating

hours, energy-efficient LEDs, CRI > 80, CRI > 80, THD<5%, P.F>0.95,

SDCM 3, direct light emission, Luminaire housing in Aluminium Extrution,

Supply, Installation, Testing and Commissioing of Recessed

downlightwith HPE (High-Performance Efficiency) with LED (Light

Emitting Diode), system power: 12 W, Luminous flux of luminaire 1320

lm, 110 LM/W system efficacy, Colour temperature of 4000 K, Neutral

MR white, CRI > 80, 230V constant current driver, 70% of luminous flux Nos 10.00 1,395.00 13,950.00

after 50,000 operating hours; energy-efficient LEDs, direct light

emission, housing in die-cast aluminium, Polyester powder white

coloured coat applied over a 5-stage pre-treatment trim,

prismatic diffuser for homogenous light distribution, ZHLS (ZERO

Digitally signed by AMIT

Supply, Installation, Testing and Commissioing of Pendant/Recessed

luminaire with LED (Light Emitting Diode), system power 28 W,

luminous flux of luminaire 3080 lm, 110 LM/W system efficacy,

direct light emission CRI>80, colour temperature of 4000K, Neutral

white, 230V constant current driver, 70% of luminous flux after 50,000

operating hours, energy efficient LEDs, luminaire profile in aluminium,

MR Plastic moulded end caps, Polyester powder Aluminium white coloured Nos 10.00 3,450.00 34,500.00

coat applied over a 5- stage pre-treatment, high efficiency glare- free snap

fit micro-prismatic diffuser for homogeneous light distribution, ZHLS (Zero

Halogen Low Smoke) internal wiring, integral Electronic control gear,

adjustable suspender,

Protection class I, IP 20, L = 1199 mm, B = 75 mm, H = 90 mm,

PL max = 1500 mm

Supplying, installation, testing & commissioning of intelligent

28.2.4 analog addressable photothermal detector complete with each 20.00 3,004.00 60,080.00

mounting base complete as required

Supplying, installation, testing & commissioning of response indicator on

28.2.5 surface/recessed MS Box having two LED, metallic cover complete with all each 5.00 306.00 1,530.00

connections etc as required.

Supplying, installation, testing & commissioning of intelligent addressable

programmable sounder complete as required.

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V

rated with annealed copper conductor having

XLPE insulation, steel wire armouring & FRLS/HFFR outer sheath complete

Conference table

Dimension:11700mm(L)x 600mm(D)x 750mm(H) (overall depth: 4500mm)

Supply, installation, testing and commissioning of chairman microphone

units comprising digital desktop conference microphones constructed with

aluminum alloy panel or as per OEM , incorporating directional electret mic

capsules or as per OEM with frequency response of 30Hz–20kHz or better,

signal-to-noise ratio (SNR) greater than 90dB or better, dynamic range of

1 96dB or better, total harmonic distortion (THD) less than 0.05% or better, Nos. 1.00 46,728.00 46,728.00

and sensitivity of -37dB±2dB or better or Microphone nominal input: 85 dB

SPL; each unit should operate on 24V DC±5% supplied by the conference

host or as per OEM, support a pickup distance of at least 50cm, and include

a 3.5mm earphone monitoring jack; connectivity via RJ45 (Cat6) or Cat-5

with LILO or junction connectors, or as per OEM supporting system

Digitally signed by AMIT

Supply, installation, testing and commissioning of delegate microphone

units, digital desktop conference microphones with aluminum alloy panel or

as per OEM-better, integrated video tracking capability, and built-in Class D

speaker rated at 4W or better; each unit shall Microphone- A Gooseneck

2 type cardoid or supercardoid microphone with length not less than 48cm, Nos. 22.00 46,728.00 10,28,016.00

utilize a heart-shaped directional electret mic capsule with a frequency

response of 30 to 125 Hz–15 to 20kHz or better, signal-to-noise ratio (SNR)

greater than 90dB or better, dynamic range of 85 0r 96dB or better, total

harmonic distortion (THD)

Supply, installation, testingless

andthan 0.05% or better,

commissioning and sensitivity

of Conference Centralof -

Controller, which should have a robust metal chassis or as per OEM and

equipped with a 2.8" LCD color display or LED indicator with touch buttons

for independent system setting and monitoring; the controller should

support a minimum of 80 conference units via 4-channel 8PIN/2 x 6‑pole

or/ and 2-channel RJ45 network interfaces, expandable up to 245 units or

3 better; audio input options must include RCA×2 (+20dB) and XLR×1 Nos. 1.00 2,33,640.00 2,33,640.00

(+10dB), with audio output via main RCA×2 (+20dB), auxiliary RCA×2

(+20dB), and balanced XLR×1 (+10dB) or better; Integrated Audio

Recording facility, MP3 Recording, maximum capacity of 128 GB, Minimum

3000 Hours. Builtin / External feedback suppression, supporting SD camera

integration and the controller must offer application speaking mode,

queuing mode, Audio frequency response should be 30 Hz to 20 kHz, Signal-

to-noise ratio greater than 90dB, Harmonic distortion (THD) less than

Suppy Installation Testing and Commissioning of digital signal processor

with minimum 12-14no. Or more Mic / line input with phantom power on 8

nos. Inputs with AEC and 8 or more line level output, 1 no. Or more GPIO

4 at least 2 channel of USB input and output for software Video Conferencing, Nos. 1.00 3,43,935.00 3,43,935.00

should have 24x 48 channel of digital dante input output, Should have

sampline rate of 48kHz or better, should support Control with App via iOS

and Android devices, or any third-party control system, Shall have Built-in

Supply, Installation, testing and commissioning of 6-6.5" driver and 0.5-1"

tweeter two-way coaxial thin edge ceiling loudspeaker having 100V

transformer power taps from 60/30 watts to 15watts or better it should

have for premium performance in demanding applications, or as per

5 OEMConical dispersion : 142° or more, Low impedance RMS continuous Nos. 12.00 5,665.00 67,980.00

power of 30-60watts, impedance : 8 or less or on 100 V,frequency range (-

10dB) : 70 Hz - 20 kHz, Max SPL on 100v should be 105dB or more etc

Should have Support EN-60065 Safety.complete required as per

specifications.

Supplying, Installation, testing and commissioning of Multi Channel

amplifier providing total rated output power 600 W with power sharing on

all outputs; Minimum 4 Channel more Input and Output, Class D, Nominal

Audio limiters, high temperature, DC, HF, short circuit, back-EMF, peak

current limiters, inrush current limiters, mains over/under voltage

Digitally signed by AMIT

SITC of Full HD 1080p @ 60 frames per second PTZ Camera with minimum

20X Optical Zoom and FoV of minimum 57 deg, min 100 Presets.Camera

7 should support simultaneous outputs through Ethernet, HDMI, 3G-SDI & Nos. 1.00 3,14,376.00 3,14,376.00

USB 3.0, Audio In and can be controlled via RS232 & 422 In & Out &

IP.Panning angle -170° ~ +170°, Tilting angle -30° ~ +90° . The tilting

and panning speed of camera should be minimum 200° per second. Camera

SITC of interactive flat panel display should be a minimum of 86 inches

with 4K UHD resolution (3840 × 2160), 400 cd/m² brightness, and infrared

(IR) touch technology supporting at least 20-point multi-touch with ≤10ms

response time. It should include anti-glare, 4mm tempered glass, run on

Android 8.0 or higher with at least 4GB RAM and 32GB storage, and offer

multiple input options including HDMI, USB, VGA, LAN, RS232, and an OPS

slot. Built-in 2 × 20W speakers, wireless screen sharing, digital whiteboard,

and file viewing capabilities (PDF, Word, PPT, etc.) are required. The unit

9 Supply and Installation of Floor Mount for 86" Display Nos. 1.00 46,728.00 46,728.00

Supply and Installation of OPS Intel Core i5 12th Generation 8GB DDR4,

256 GB SSD WIFI BT Windows 11 Pro License, Preloaded

SITC of 55" 4k, UHD Professional Signege Display with 500 NITS,

Built-in SOC/ Media Player with Quad Core Processor, Built in Open

Platform , Surface Haze 28%,With Built in Bluetooth, 3X HDMI 2.0, Audio

11 Input Audio Output, Built in Speaker(10W x 2) ;Including mounting Nos. 4.00 83,635.20 3,34,540.80

bracket, Built-in Chromecast, Dolby Digital audio, The built-in SOC is

powered by Google's Android OpenPlatform, 2 USB(2.0), 3*HDMI(2.0

Side), Headphone Out, 1 *RJ 45, SPDIF out, Built In 2.4 GHZ

Wifi,CPU Built in With Cortex-A55*4, 1.1 GHz Processer, 2 GB RAM

Supply, Installation, Testing & Commissioning of Av control processor and

tocuh panel where controller should have 1 x RS-232/ RS-422/RS-485; 1 x

bidirectional RS-232; 4 x Digital 1/0; 1 x IR/Serial; 2 x relays : 1 GB

SDRAM & 8 GB Flash Memory; Data rate: 10/100/1000Base-T, half/full

duplex with autodetect; support protocols: ARP, DHCP, DNS, HTTP, HTTPS

UDP/IP; Supports control system synchronization; Supports 802.1X

Authentication; Front panel port status indicators; Should have Regulatory

compliance: CE, UL, FCC, ROHS, WEEE equivalent. 7" Capacitive

touchscreen should have 1024 x 600 resolution; Aspect ratio: Widescreen;

color depth 24-bit; Brightness- 420 nits; Contrast -700:1; Viewing angle

Digitally signed by AMIT

Supply, Installation, Testing & Commissioning of 3 nos. AVolP Encoder

supports 4K UHD over Gigabit Ethernet; Inputs min 2x HDMI 2.0 4K60

4:4:4 & 1x USB-C capable of scaling and outputting video with auto-

switching between all the 3 input sources; HDCP 2.3; HDMI Loop Out up to

4K60 4:4:4; USB Host port; LPCM audio support upto 8 Channels from

HDMI Input; Embedded audio input; Native AES67 Network Audio;

Adjustable Video Bitrate upto 800 Mbps with bit-rate compression CODEC

w/ built-in Al; Video Codec: JPEG2000 based visually lossless video

compression algorithm; latency: 3 ms at 4K60 4:4:4;

AES-256 Encryption or better; 2 or more LAN ports with POE power

sharring;; VLAN tagging to saperate Video traffic from data & voice and

VLAN Trunk mode capability; RTP audio stream capability; ICMP,IGMP &

PIM feture support; Supports Video, Audio, USB, KVM & RS232 independent

matrix routing; EDID managment; USB over IP (KVM), RS-232 over IP, IR

over IP, GPIO over IP; Standard PoE Power 15 W or ower; Integrated

Software management platform supports for system monitoring & control;

Future upgradable DANTE; support 802.1x, HTTPS, SSH security

encription; Compliance supports TAA, CE, FCC, C-tick, RoHS, WEEE. & 6

nos. of AVolP Decoder supports 4K UHD over Gigabit Ethernet; Outputs min

1x HDMI 2.0 4K60 4:4:4 & 1x USB-C capable of scaling and outputting

video with auto-switching; HDCP 2.3; min 2x USB peripheral ports; LPM

audio support upto 8 Channels from HDMI Input; De-embedded audio

output; Native AES67 Network Audio & Dolby enabled; Adjustable Video

Bitrate upto 800 Mbps with bit-rate compression CODEC w/ built-in Al;

Video Codec: JPEG2000 based visually lossless video compression

algorithm; latency: 5 ms at 4K30 & 4K 60 4:4:4; 2 or more LAN ports with

POE power sharring; VLAN tagging to saperate Video traffic from data &

voice and VLAN Trunk mode capability; RTP audio stream capability; Built-

SITC of A set of HDMI, USB, Audio, Speaker, audio and ethernet cables and

Supply & Installation of CAT 6 1G speed UTP jack information outlets

17 complying fully or exceeding with category 6 connecting hardware Each 40.00 257.00 10,280.16

specifications for all pair combinations up to 250 MHz. Outlets shall use

Supply technologyof USB 4k HDMI capture card with 4k HDMI to USB

Supply, Installation, Testing & Commissioning of 22 U floor mount rack

19 with fans , 2 cable managers , satationary shelf , 2 Nos. of hardware pkts. Nos. 1.00 52,569.00 52,569.00

VRF/VRV OUTDOOR UNIT

Digitally signed by AMIT

Supplying, Installation, Testing & Commissioning of Modular type Variable

Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units

suitable for cooling/heating having 100% hermetically sealed inverter type

twin Rotary/Scroll Compressor(s), minimum two compressors (with

individual separate PCB) for above 14HP modules, microprocessor based

Controller, top discharge type condensing unit(s), with R-410-A Refrigerant

31.1 or equivalent, vibration Isolators with suitable foundation etc. complete as

required. To have better efficiency condenser fan shall be capable to

operate at different speed with respect to load. The unit shall deliver the

rated capacity and in confirmation as per IS 18728:2024 and CPWD

Specifications and work even at 50°C ambient temperature without

tripping. The system shall be able to deliver 100% of the rated capacity

upto 39 0C. The unit shall be suitable to work on 400V +/- 10%, 3 Phase,

INDOOR UNIT Supplying, Installation, Testing and Commissioning of

following minimum capacity 4 way Cassette Type Indoor

ceiling mounted unit equipped with synthetic washable media pre-filter, fan

section with low noise fan/dynamically

31.4 balanced blower, multispeed motor, coil section with DX Copper coil,

electronic expansion valve, outer cabinet,

drain pump, grill, necessary supports, vibration Isolation, Corded remote

control etc., suitable for operation on single

phase 230 V ± 10%, 50Hz AC supply, complete, as required. The Indoor

4-Way Cassette type

Control & Trasmission Wiring

Providing and fixing control cum transmission wiring of 2 core x 1.0 sq. mm

copper in suitable conduits between indoor and outdoor unit.

REFRIGERANT PIPING

Supplying, Installation, testing and commissioning including

vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard

drawn copper refrigerant piping for VRV/VRF system, complete with fittings,

31.14 with suitable adjustable ring type hanger supports, jointing/brazing

including accessories, insulated with XPLE Class-O tubular insulation/with

Class-O closed cell elastometric nitrile rubber tubular sleeves sections of 19

31.14.2 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Rmt 10.00 346.00 3,460.00

31.14.3 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Rmt 20.00 487.00 9,740.00

31.14.4 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Rmt 10.00 615.00 6,150.00

31.14.5 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm Rmt 10.00 739.00 7,390.00

31.14.8 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm Rmt 20.00 1,157.00 23,140.00

Supply, installation, testing and commissioning of uPVC Pipe ,complete

MR with fittings, supports,U trap arrangement,Clean Plug with 6mm nitrile

insulation and accessories as per specifications, drawings.

Digitally signed by AMIT

S.No. Ref. UNIT QTY DSR RATE DSR AMOUNT MR AMOUNT

Digitally signed by AMIT