ADDN AND ALTN TO SM BARRACK AT LUCKNOW CANTT

Amount

B/R ITEMS Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles from site & rubbish off the premises complete all as specified and directed.

Taking down chowkhat or frames with shutter (without taking of shutters from the frame) area not exceeding 1.5 sqm complete with hold fast etc including making good dismantled portion by brickwork, concrete (1:2:4 type B-0) or plastering in CM 1:3 complete all as specified and as directed.

Taking down chowkhat or frames with shutter (without taking of shutters from the frame) area exceeding 1.5 sqm not exceeding 4 sqm complete with hold fast etc including making good dismantled portion by brick work, cement concrete (1:2:4 type B-0) or plastering in CM 1:3 each complete all as specified and as directed.

Taking down shutter of any description exceeding 1.00 sqm and not exceeding 2.00 sqm each shutter complete all as specified and as directed.

M&L for brick work with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

M&L 5mm thick rendering in cement mortar in CM (1:3) on ceiling finished even and smooth without using extra cement, complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar (1:6) on other than fair faces of brick work / stone masonary surfaces finished even and smooth without using extra cement, complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in leveling /sub base of flooring complete all as specified and directed.

M&L for 7 to 8 mm thick Non skid ceramic coloured tiles (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors etc; laid jointing in neat cement slurry and pointed in white cement mixed with pigment to match with shade of tiles over & including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for glazed ceramic coloured tiles 7 to 8mm thick in vertical surfaces of size exceeding 0.11 Sqm but not exceeding 0.18 Sqm set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick screed plaster in cement mortar 1:4 complete all as specified and directed.

M&L for machine cut kota stone slab, 20-25mm thick over and including 15mm thick screed bedding in cement mortar 1:6 as in floors, laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing with mirror polish complete all as specified and directed.

M&L for machine cut kota stone slab in skirting / steps / risers of required size, single Piece including moulding exposed edge of threads , 16 to 18mm thick & including 10mm thick screed bedding in cement mortar 1:4 as in floors, laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing with mirror polish complete all as specified and directed.

S & F Pressed steel frames of size 105mm x 60 mm for doors with one or more rebates including filling of cement concrete / mortar, fixing lugs, required no of MS hinges, lock strike plate and all other connected accessories etc., complete all as specified and directed.

S & F Pressed steel frames of size 125mm x 60 mm for doors with one or more rebates including filling of cement concrete / mortar, fixing lugs, required no of MS hinges, lock strike plate and all other connected accessories etc., complete all as specified and directed.

S&F 30mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35mm thick factory made glazed and Skelton shutters 2nd class HW rails and stiles planed framed and open rebated and prepared to receive glass, gauze etc (without sash bars) with cut and mitered beads for securing glass etc size of members of shutters as specified in SSR part I, section 8 clause 8.24 (a) supplied and fitted to chawkhats complete all as specified and directed.

S&F solid PVC frame (Single Rebated ) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffener and fixed with 100x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) complete all as specified and directed.

S&F factory made solid PVC profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colours as infill , with C type GI or 40 x20 x19 of MS pipe as stiffener & supplying & fixing in frame at site as per specifications & drawing complete all as specified and directed.

M&L in repairs 18/19mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice laminations, fixed with screws, including teak wood lipping 19 x 6mm thick fixed with nails in shelves, partition and pelmet boxes, cupboard, shelves etc. all as specified and directed.

S&F continuous (Piano) hinges, stainless steel, bright finish, width of flaps (when open) 30mm complete all as specified and directed.

S&F in repairs PVC coated, MS curtain rods 22-25mm dia with and including fixing of two Nos MS brackets and decorative type PVC knobs at both ends of curtain rod complete all as specified and directed.

S & F 300mm stainless steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of apertature 1.40mm and fixed with tinned tacks or stainless steel wire staples complete all as specified and directed.

S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of apertature 1.40mm and fixed with tinned tacks or stainless steel wire staples complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing complete all as specified and directed.

S&F in repairs 3mm thick sheet glass, ordinary quality, fixed with oil putty size of glass not exc 0.50 sqm in each pane, complete all as specified and directed.

S & F stainless steel 100mm Butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S&F 100mm butt hinges stainless steel with galvanised mild steel hinge pin anodised ISI marked and fixed, complete all as specified and directed.

S&F 150mm long stainless steel barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm longstainless steel handles, fabricated type, anodised complete all as specified and directed.

S&F 140mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and directed.

S&F 300mm long stainless steel, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolt of extruded section or cast aluminium alloy all as specified and directed.

M&L cutting holes in brick walls (exc half brick but not exc one brick) for inserting hold fasts and making good dismantled portion in PCC 1:2:4 (20mm aggregate) and cement mortar 1:3 complete all as specified and directed.

M&L mild steel work such as hold fasts, hooks, clamps etc and similar work conforming to Fe 290, Gde -165 complete all as specified and directed.

Taking up or down 15 mm dia steel/GI tubing and connection including removal of fittings of any type and material complete and all as specified and directed.

Taking up or down 20 mm dia steel/GI tubing and connection including removal of fittings of any type and material complete and all as specified and directed.

Taking up or down 25 mm dia steel/GI tubing and connection including removal of fittings of any type and material complete and all as specified and directed.

S&F 15mm GI water tubing (concealed ), medium grade, galvanised with all fittings ( and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed.

S&F 20mm GI water tubing, medium grade, galvanised with all fittings and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed.

S&F 25mm GI water tubing, medium grade, galvanised with all fittings and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed.

Refixing old 15mm GI tubing (Concealed) galvanised with new fittings and fixed to walls, ceiling or laid in floors, trenches including necessary cleaning, cutting, screwing complete all as specified and directed.

Refixing old 20mm GI tubing galvanised with new fittings and fixed to walls, ceiling or laid in floors, trenches including necessary cleaning, cutting, screwing complete all as specified and directed.

Refixing old 25mm GI tubing galvanised with new fittings and fixed to walls, ceiling or laid in floors, trenches including necessary cleaning, cutting, screwing complete all as specified and directed.

S&F in repair tubular towel rail, chromium plated brass 20mm dia 'D" type 60cm long between flanges complete all as specified and directed.

S&F in repair brass chromium plated shower rose of 125mm size with swivel joints, including fixing to steel pipe or union of 15mm bore complete all as specified and directed.

S&F in repair PVC valve less, syphonic action type dual flushing cistern, 10 Litre capacity, low level, white with inlet, ball vlave float, handle including PVC rigid pipe 32mm bore as flush pipe fixed on walls by drilling holes and using PVC rawl plug of suitable size complete all as specified and directed.

S&F in repair PVC connection, heavy duty 15mm bore, 45cm long with 2 Nos PTMT nuts of approved quality complete all as specified and directed.

S&F in repairs 15mm bore cast copper alloy chromium plated bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and directed.

S&F in repair angle valves 15mm bore , cast copper alloy chromium plated with long sunk and cap (Concealed type), screwed down high pressure screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed.

Taking out old unserviceable water closet and S&F vitreous China "Orissa pattern" size 580 x 440mm" coloured, with intergral foot rests with vitreous china 'P' or 'S' trap front or back inlet including connection to trap and to flushing pipe, anti syphnage pipe and making good the floor to match the existing complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan pedestal pattern, including P or S trap and connection to drain (or outgoing pipe) including PVC seat cover and excluding flushing cistern and flush pipe complete all as specified and directed

Supply only liquid water proofing compound of approved quality and make confirming to IS complete all as specified and directed.

Taking down 100mm / 75mm dia AC rain water pipe (any size or pattern ) including all fitting, heads, shoes, bends and removing from sites complete all as specified and directed. (Measured over all as fixed along the center line over the fittings and accessories)

S&F 110mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors / trenches with & including existing / new PVC clamps complete all as specified and directed.

S&F 75mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors / trenches with & including existing / new PVC clamps complete all as specified and directed.

S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal with access door with cement joint complete all as specified and directed.

S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal with access door with cement joint complete all as specified and directed.

S&F 110mm bore PVC (SWR) bend / shoe of any radius with access door, complete all as specified and directed.

S&F 75mm bore PVC (SWR) bend / shoe of any radius with access door, complete all as specified and directed.

S&F in repairs PVC (SWR) floor trap 75mm, plain with grating including jointing with solvent cement complete all as specified and directed.

M&L PCC (1:3:6) type C-1 using 20mm graded crushed stone aggregate, 50mm thick as in plinth protection finished fair & even laid in alternative bays n. exc 2M in length and joints filled with bitumen mastic 1:3 complete all as specified and directed.

S&F in repair new rigid PVC waste pipe of approved quality 32mm bore, 75mm long with one end socketed fixed to waste coupling including one PVC reducer 32mm complete all as specified and directed.

M&L for preparation of old painted steel and iron surfaces of any description over 10CM width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new or previously untreated wood and wood based surfaces of any description not otherwise described over 10cm width girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old painted wooden surfaces and applying one coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Supply and fixing in repairs 15 mm Stop valves, cast copper alloy, chromimum plated, with long shank and cup concealed type complete all as specified and directed.

S&F in repairs 15mm bore pillars taps fency type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe fixed complete all as specified and directed.

S&F in repair plastic water closet seat cover white, closed pattern with flat bottoms & cover and aluminum anodised hinging device all as specified and as approved.

S&F in repair soap dish, any type fixed to plugs with chromium plated brass screws completed all as specified and directed.

S&F in repair health faucet (ABS body ) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

Demolition of cement concrete of any description from sunken floor (ground or Ist floor) and removing and depositing materials exc 150 Mtrs but n. exc 250 Mtrs away complete all as specified and directed.

M&L for PCC (1:5:10) type E-2 using 40 mm graded crushed stone aggregate as filling in mass concrete using in sunken floor complete all as specified and directed.

Taking down existing treatment any type/any thickness on roof including taking down/removing the backing bed concrete if any and dispose off at a distance exc 100m as directed etc complete all as specified and directed

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L 15mm thick screed bed in cement mortar (1:3) mixed with water proofing compound @ 3 % by weight of cement on concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed. Filling Note :- WPC measured and paid separately under respective item of BOQ.

M&L PCC 1:2:4, type B1 using 20 mm graded crushed stone aggregate as in roof padding/ roof kerbs / benching / coved fillets etc rounded or chamfered on edges, complete, all as directed.

M&L for treatment of roof with 4 coats of reinforced elastomeric liquid water proofing membrane of 400 micron thickness in four layer (100 micron each layer) having SRI of 130, tested as per ASTM E 1980 (with Solar reflectance and Thermal emittance tested as per ASTM C 1549 and ASTM C 1371, respectively). The coating should have water absorption less than 1% as per IS : 101 (P-7/Sec-1) 1989, with the ability to resist heat upto 120 degree centigrade as per IS 101 {P-7/Sec-3} 1990 having VOC less than (g/ltr) as per ASTM D 3960 and should also have excellent resistance to transmission of ponded water upto 2.5 bars of pressure for 7 days. It should also be resistant to Ammonia solution, sodium, nitrate, sodium hydroxide alongwith water and soap solution as per IS : 101 (P-7/Sec-2)1990. The water proofing membrane will be laminated with 25-40 micron thick transparent Nano modified composite cross linking polymeric coating with a minimum of 40% solid content as per IS : 101 (P-8/Sec 6) 1993 and also should pass impact test per IS : 101(P-5/Sec 8) 1998 alongwith having dust and water repellent & anti-graffiti property passing scratch hardness test of 500g as per IS : 101 (P-5/Sec-2) 1998. It should also pass cross cut Adhesion test as per IS : 101 (P-5/Sec-2) 1998. The Polymeric coating should have a self cleaning and easy to clean property with excellent weather stability and DPR (Dirt pickup ratio). Surface preparation includes washing cleaning to remove all dust, fungus etc. The work will be done under the supervision of the Engineer-in-Charge. The coating thickness and the methodology of application shall strictly be carried out by authorized vendor/ manufactures with all specifications and as approved by Engineer-in-Charge. The manufacture shall be give guarantee for the performance & durability for 10 yrs complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars dovetailed or welded complete all as specified and directed.

S&F for steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay complete without glazing bars, dovetailed and welded, complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and directed.

S&F steel door including projecting type hinges, steel handle, complete, with glazing bars, dovetailed or welded complete all as specified and directed.

S&F 3mm thick figured glass, pin head type and glazing with oil putty in square n. exc 0.50 Sqm in each pane, complete all as specified and directed.

S&F 3mm thick glass, ordinary quality, fixed with oil putty size of glass not exc 0.50 sqm in each pane, complete all as specified and directed.

M&L 20mm thick cement plaster in CM 1:4 mixed with water proofing compound @ 3% and applying water proofing treatment on sunken portion with acrylic base polymer modified cementations composite compound as specified and approved & cement slurry two layers, Ist layer @ 0.488 Kg /Sqm mixed with composite compound @ 0.253 Kg /Sqm, & the second layer slurry @ 0.242 Kg /Sqm mixed 0.126 Kg of compound complete with min 4 hours allowed to air cure between these layers and applying 200 u polyflim with adhesive complete all as specified and directed.

M&L for complete removal of existing treatment by scrapping with mechanical wall sander (having mechanical vacuum mechanism ) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. by skilled labour complete all as specified and directed.

M&L for waterproof cement based putty @ 1 Kg (undiluted ) per Sqm of average thickness 1 mm over the plastered / old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism ) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps :- Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 Kg putty per minute. Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI complete all as specified and directed.

M&L for one coat of acrylic water based exterior grade primer @ 0.9 Ltr (undiluted )/10 Sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 Ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.

M&L for two coat water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & colour stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram / litre as per the LEEDS specifications, anti fungal properties in two coats @ 1.79 Ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 Ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint complete all as specified and directed. Note for item No 86 to 88 above :- (a) The work pertaining to periodical services & water proofing shall be executed from authorized applicator through manufacturer of which the materials i.e Paint, Distemper, Cement base paint, putty etc is proposed to be used by the contractor and approved by Garrison Engineer.

M&L preparation of new/old wall surfaces and applying two coats of oil bound distemper over a coat of primer over1mm thick Birla white wall care putty after complete removal of existing treatment on old plastered surface including necessary preparation complete all as specified and directed.

M & L for preparation of old /newly decorated plastered or un-plastered surface of walls, cornices, pilasters etc by brooming down scraping, filling all the nail holes etc and preparing surface with plaster of Paris etc and applying two coat of white wash on walls mixed with adequate qty of fevicol complete all as specified and directed.

M & L for preparation of old /newly decorated plastered or un-plastered surface on ceiling surfaces, cornices, pilasters etc by brooming down scraping, filling all the nail holes etc and preparing surface with plaster of paris etc and applying two coats of white wash on walls mixed with adequate qty of fevicol complete all as specified and directed.

Dismantling loose / disintegrated portion of RCC Chajjas, bend shelves, beams balconies and similar work at any position or any height and dubbing out with PCC 1:1.5:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished required shape including applying anti corrosive paint on exposed surfaces and provision of necessary supporting form work and including 10mm thick plastering in CM 1:4, finished fair and even, complete all as specified and directed.

M&L for 16 to 18mm thick granite (of any type ) work (table rubbed and polished ) in steps, jambs, pillars, window cills, cooking platforms and like pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding of edge laid over 15mm thick screed bed in CM (1:4) including rounding of edge of stone slabs one edge complete all as specified and directed.

S&F in repair 2000 Ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position on PCC block pedestal as per drawing No. LZ/C-TD/157/25 Sheet 1/1 dated 22 Jan 2025 and all as specified in SSR Part I complete all as specified and directed. Note:- Amount of PCC block pedestal shall deemed to be included in quoted rates, nothing shall be admissible in this account to the contractor.

S&F in repair ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe of 20mm dia and fixed (minimum weight 210 gms) complete all as specified and directed.

M&L disconnecting existing tanks exc 1000 Ltr & n. exc 2000 Ltr Capacity , setting aside (or lowering if required ) for repairs, cleaning, etc and hoisted and fixed in position on PCC block pedestal as per drawing No. LZ/C-TD/157/25 Sheet 1/1 dated 22 Jan 2025 and all as specified in SSR Part I complete all as specified and directed. Note:- Amount of PCC block pedestal shall deemed to be included in quoted rates, nothing shall be admissible in this account to the contractor.

M&L disconnecting existing tanks exc 500 Ltr & n. exc 1000 Ltr Capacity , setting aside (or lowering if required ) for repairs, cleaning, etc and hoisted and fixed in position on PCC block pedestal as per drawing No. LZ/C-TD/157/25 Sheet 1/1 dated 22 Jan 2025 and all as specified in SSR Part I complete all as specified and directed. Note:- Amount of PCC block pedestal shall deemed to be included in quoted rates, nothing shall be admissible in this account to the contractor.

S&F in repair 15mm dia two way bib taps, cast copper alloy chromium plated fancy type handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 20mm bore Gun Metal, globe or gate valves, with iorn wheel head, screwed both ends or iron pipe and fixed complete all as specified and directed.

S&F in repair 25mm bore Gun Metal, globe or gate valves, with iorn wheel head, screwed both ends or iron pipe and fixed complete all as specified and directed.

S&F urinal spreader of PTMT any colour for fixing with 15mm dia pipe complete all as specified and directed.

S&F in repairs Vitreous China urinals, half stall type (flat back), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including spreader, 60mm long brass screws, pointing around urinal back in cement; fixing with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed.

S&F in repair wash hand basins vitreous china, coloured flat back size 550 x 400mm fixed including bracket complete all as specified and directed.

S & F in repair 0.56 mm Plain Aluminium sheeting alloy 31000H4 in straight flashing of crumple joints complete all as specified and directed.

M&L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc over and including brushing neat cement slurry with 3.00 Kg of cement per Sqm complete all as specified and directed.

Taking down shutters of any description exceeding 1.00 Sqm but not exceeding 2.00 Sqm and easing adjusting and also refixing builders hardware as required and renewal of unserviceable screws and refixing in the same opening complete all as specified and directed.

SEWAGE DISPOSAL M & L brick work with old size bricks, straight or curved on plan exc 6M mean radius, built in cement mortar 1:4 complete all as specified and as directed.

Description all as per srl item No. 108 here in above but except bricks (Old size Bricks obtained from item No 148 here in after shall be used) complete all as specified and directed.

M & L for cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete , Sub base complete as specified and directed.

M&L for 40 mm thick PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in leveling /sub base of flooring complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in copings, bed plates, plinth courses, parapets and the like including weathering, slightly rounded or chamfered angles and throating including use and waste of necessary form work etc. complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length bent to shape required including crancking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for 150 mm reinforced concrete pipes, class NP-2, laid and jointed complete with collars including jointing with cement joints and haunching with PCC 1:4:8 type D-2 using 40mm graded stone aggregate for 150mm bore NP2 pipe line including excavation and earth work and returning, filling in trenches and removal of soil upto 1.5m, including taking up broken sewage pipe line, complete all as specified and directed.

M&L for 200 mm reinforced concrete pipes, class NP2, laid and jointed complete with collars including jointing with cement joints and haunching with PCC 1:4:8 type D-2 using 40mm graded stone aggregate for 200mm bore NP2 pipe line including excavation and earth work and returning, filling in trenches and removal of soil upto 1.5m, including taking up broken sewage pipe line, complete all as specified and directed.

M&L for providing pre-cast RCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in landings, cover slab (for man holes and drains) including necessary form work set in CM 1:4 complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

FOOT PATH M&L hardcore of broken stone boulders gauge not exc 63 mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rolled/rammed to a true surface etc complete all as specified and directed.

M&L 75mm thick cement concrete 1:3:6 type C-2, (using 40mm graded crushed stone aggregate) as in sub-floors, sub-bases, etc.; complete all as specified and directed.

S&F 60 mm thick, machine pressed rubber moulded, glossy coloured, precast concrete interlocking paver block any shape and size of M-35 grade of approved shade laid over and including 50mm thick sand cushion and filled with fine sand complete all as specified and directed.

M&L pre cast cement concrete 1:3:6, type C-1 ( using 20 mm graded crushed stone aggregate), in kerb stone set in cement mortar 1:6, including necessary earth work excavation, complete all as specified and directed.

M&L for painting two coats of synthetic enamel paint over a coat of primer over new concrete surfaces of any description over 10cm girth or width not other wise described complete all as specified and directed.

INTERNAL ELECTRIC SUPPLY Taking down old copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, etc.removing materials for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls floors etc complete all as specified and directed.

M&L for point wiring complete for One light/Fan/Exhaust Fan/Bell point controlled by one switch with PVC insulated and unsheathed FRLSH cable 1.5 Sqmm (nominal area) ISI marked, multi-stranded copper conductor single core including ISI marked 20 mm dia PVC conduit medium grade concealed in wall and heavy duty PVC conduit not less than 20 mm in roof / floor slab and ceiling, pressed GI concealed terminal boxes not less than 1.6 mm thick of required size and with top cover 3 mm thick of plastic laminated sheets of required colour complete, including 1.5 Sqmm PVC, FRLS cable insulated unsheathed copper earth wire to the common earth and connecting to earth dolly, including colour coding of cable shall be Phase-red, Neutral-black and Earth- green with all accessories complete all as specified and directed. Note :- In case of roof/ceiling, heavy duty PVC pipe shall be used without any extra cost

Description all as per srl item No-124 here in above but for one 3 pin 6A socket outlet independent controlled by one switch complete all as specified and directed.

Description all as per srl item No-124 here in above but for one 6A socket outlet on the same board controlled by one switch complete all as specified and directed.

Description all as per srl item No-124 here in above but for one 3 pin 06/16 Amps socket outlet independent board with 2.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable and 2.5 sqmm PVC insulated unsheathed copper conductor single core cable (green color) as earth lead in and incl conduitcomplete all as specified and directed.

S&F Switch piano, flush type 6 Amps single pole, one way complete all as specified and directed.

S&F Socket outlet, flush type 2 in 1, 5 pin, 5 Amps, multipurpose complete all as specified and directed.

S&F switch socket combination outlet 2 in 1, 3 pin, 6 Amps and 16 Amp flush type, universal, 230 volts, four hole complete all as specified and directed.

S&F fan regulator electronic, step type humfree, AC 240 Volts, 100 Watt duly ISI marked suitable to control speed of fan from 0 to 100 % and connecting electrically complete all as specified and directed.

Supply and fixing in replacement of LED security light 35 Watt, 5700K with IP 66 protection comprises of a pressure die-cast aluminium housing, heat resistance toughened glass, LED lenses, surge protector, electronic driver etc and all accessories pre-wired including connecting up with 1.5 Sqmm multistranded three core copper cable PVC from ceiling rose to the connector of fitting, connection wires not to be more than 2.5 in length and made out of GI tubing 35/40 mm dia /suitable dia light grade bend to shape security light fitting with necessary MS clamp 25 mm wide and 6 mm in thickness in suitable length not more than 30 CM and max length of pipe 1.5 Mtr long with one code of anti corrosive primer and two coats aluminum paint including nuts, bolts and washers complete all as specified and directed.

Supply & fixing LED tube light fittings 1200MM, 20W higher energy saving decorative ultra slim square profile LED lighting fixture with extruded aluminium housing environment friendly energy efficient complete all as specified and directed

M&L for ceiling rose 6 Amp, 250 Volts, AC ISI marked with three equal size terminals and PVC /Polycarbonate insulated body of 50x25 mm size complete all as specified and directed.

Taking down carefully ceiling fan of any sweep complete with all accessories dismantling blades and deposit in safe custody after civil work painting of ceiling fan as per existing colour code and re-fixing the same place complete all as specified and directed.

Taking down carefully exhaust fan of any sweep complete with all accessories dismantling blades and deposit in safe custody after civil work painting of ceiling fan as per existing colour code and re-fixing the same place complete all as specified and directed.

M&L for Submain wiring with two single core 6 sqmm copper con-ductor, FRLS-H insulated, multistranded, unsheathed cable ISI marked drawn in con-duit concealed in wall surface / ceiling for sub main connec-tion including one run of 6 sqmm FRLS-H insulated mul-tistranded unsheathed copper conductor used as earth wire to common earth and connection to earth dolly complete all as specified. Note:- Two single core 6 sqmm copper conductor, one run PVC conduit and one run of 6 sqmm earth wire shall be considered & measured as one unit.

Supply and fixing in replacement sheet metal enclosure MCB distribution board, double door with IP-43 IK-09 protection with metal door single pole and neutral 240 volts 12 way, with and including 200 Amp size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.

Supply and fixing in replacement sheet metal enclosure distribution board triple pole and neutral (VTPN), AC 440 volts, 8 way with 200 amp rated copper bus bar and metal door with IP-54 1K-09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed and comprising of the following :- (a) MCCB, 63 Amp, 04 pole, AC 415 Volts of 16 KA breaking capacity-1 No (b) MCB, SPN , AC 240 volts of 40 Amp ‘C’ curve, 10 KA breaking capacity-12 Nos

S&F in replacement MCB single pole 6 to 40 Amp rating 'C' Series,10 KA 240 Volts, AC 50 Hz, ISI marked and making connections by using suitable copper lugs complete all as speci-fied and directed .

S&F in replacement MCB DP 32 Amp rating 'C' Series,10 KA 240 Volts, AC 50 Hz, ISI marked and making connections by using suitable copper lugs complete all as specified and directed .

M&L in replacement of earthing complete with galvanized earth plate electrode 600 x 600 x 6mm thick burried directly in ground vertically to a depth not less than 2.25 M below normal ground level) with top edge of the plate not less than 1.50 M below normal ground level , con-nected to and including galvanized steel wire 4mm dia as earth lead soldered and riveted to earth plate by means of nuts, bolts, check nuts & washers, of galvanized iron or steel with connected to test point and testing on completion including 15mm GI light grade pipe for earth lead protection from earth point to earth plate, including provn adequate quantity of charcoal dust mixed with 35 % common salt to a packed thickness of not less than 15 cm in alternate layers of charcoal and salt on all sides of earth plate with 20mm bore medium grade GI Pipe for watering,GI check nut, funnel and wire mesh with and including all necessary excavation & earth work in soft/loose soil, returning filling in, removal of surplus soil to a distance 50 metre,,PCC 1:3:6 type C-1 as in earth pit, 40 mm thick RCC cover using cement concrete 1:2:4 type B-1 reinforced with & including 8 mm dia mild steel TMT bar @ 100 mm c/c Both way with suitable handle for lifting arrangement & including form work complete all as specified and shown in electrical plate No 3 of MES SSR Part I 2009 and as directed. NOTE:- (i) On testing, after completion of Job, if desired earth resistance is not obtained, the earthing shall be redone at without any extra cost by contractor complete all as specified and directed.

Supply, laying, testing and commissioning of XLPE PVC insulated of cross sectional area 50 sqmm 3.5 core, PVC sheathed armoured LT 1100 volts heavy duty with aluminum conductor passing through pipe, in duct, on poles, in trenches including fixing hardware, clamps, making good the damaged surfaces etc, as required complete all as specified and directed.

Sand cushioning to U/G cable in layers of 23 cm thick (8 cm before laying the cable and 15 cm thick after laying the cable, punned thickness shall be measured) in trenches complete all as specified and directed. Note: - Only punned thickness shall be measured and paid.

M&L for Sub class ‘B’ bricks old size. laid dry flat over the cable abutting each other, length of cable equal to width of brick complete all as specified and directed.

COMMON ITEMS Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.

Taking down cement plaster on wall and ceiling including raking out joint, hacking for key scrubbing down with water etc complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

M&L 15mm thick rendering in cement mortar (1:4) mixed with water proofing compound @ 3 % by weight of cement on other than fair faces of brick / stone masonry surfaces, finished even and smooth without using extra cement, complete all as specified and directed. Note:-WPC measured and paid separately under respective item.

S & F framed work such as grills, grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for preparation of new steel and iron surfaces of any description over 10CM width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Excavation in trenches not exceeding 1.5 M wide and not exceeding 1.5 M in depth for foundation etc or for shafts, wells, cess pits, manholes, pier holes etc not exceeding 10 Sqm on plan and not exceeding 1.5 M in depth and getting out in soft/loose soil complete all as specified and directed.

Removing of excavated materials to a distance not exceeding 50 M and deposing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil complete all as specified and directed.

R K CONTRACTOR AND SUPPLIERS (BID ID -3291305)

jayanti associates (BID ID -3291067)

kaushalya construction (BID ID -3291366)

Shri Siddhi Vinayak Builders (BID ID -3290182)

M/s Sahu Associates (BID ID -3290546)