Renovation of House no. 14 in Officer Colony No. 4 at Gurugram

Amount

Dismantling Concrete reinforced cement concrete with cleaning and straghtening and cutting of bars if required.(HSR 8.6e)

Base course of floors consisting of 100 mm thick cement concrete 1:8:16 and 100 mm sand or stone filling.(HSR 14.1)

Screed of 50 mm thick cement concrete 1:8:16 to be laid below the topping(HSR 14.4)

Precast chequered tiles of 20 mm thickness In ordinary grey cement without chips laid on 20 mm thick bed of cement coarse sand mortar 1:3 with neat cement slurry between joints and over the base in floors, treads of steps and landings. (Note:- Reputed make Tile only ISI Marked will be used as approved by Engineer-in-Charge). (HSR 14.45) Note:- The agency to whom the work is allotted will have to produce original bill/voucher for all quantity in token of proof of purchase of material

Providing & fixing vitrified tiles of size 600mm X 600mm of approved make in flooring laid in any pattern as specified over base of 20mm thick cement coarse sand mortor 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles Note:- Note:- Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO,KAJARIA,SOMANI,ORIENT Bell, JONSONS , RAK & SIMPOLO(HSR 14.89) Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material

Providing & fixing vitrified tiles of size 600mm X 600mm of approved make in skirting/dados laid in any pattern as specified over base of 20mm thick cement coarse sand mortor 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles Note:- Note:- Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO,KAJARIA,SOMANI,ORIENT Bell, JONSONS , RAK & SIMPOLO (HSR 14.90) Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material

Providing & fixing ceramic tiles/ anty skid tile of size 400mm X 400mm of approved make in flooring laid in any pattern as specified over base of 20mm thick cement coarse sand mortor 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles Note:- Note:- Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO,KAJARIA,SOMANI,ORIENT Bell, JONSONS , RAK & SIMPOLO(HSR 14.91) Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material

Providing & fixing Ist quality ceramic glazed wall tilesconfirming to IS 15622 (thickness to be specified by manufacturer)of approved make in all colors,shade except burgundy,bottlegreen,black of any size as approved by engineer-In Charge in skirting ,risers of steps and dados over12mm thick bed of cement mortor 1:3 coarse and jointed with grey cement slurry,including pointing in white cement mixed with pigment to match the shade complete. Size of ceramic Glazed tiles 300mm X 450mm(HSR 14.92 b) Note:- Note:- Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO,KAJARIA,SOMANI,ORIENT Bell, JONSONS , RAK & SIMPOLO Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material

Providing and laying Baroda Green marble stone 17mm and above thick flooring included matching the grains of marble slab in any pattern as specified laid over 12mm thick cement sand mortar 1:3 and jointed with white slurry mixed with pigment to match the shade of marble including rubbing and polishing. The rates are for all heights / storey. The sample shall be got approved by Engineer-in-Chief(HSR 14.99) Note:- (i) The quality of granite stone shall be got approved from Engineer-in-charge in writing. (ii) The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material.

Dismantling white or coloured glazed tiles(HSR 8.38)

15 mm thick cement plaster 1:6 on the rough side of single of half brick wall(HSR 15.12)

Providing and applying two coats white cement based putty over plastered surface and grindling the surface smooth with sand paper to get an even and smooth finish including cost and carriage of all material, labour charges, scaffolding, sundries etc. complete. (Note:- reputed make Putty such as J.K./ Birla shall be used as approved by Engineer-in-charge). (HSR 16.81)

Pressed steel sheet frames (chowkats), consisting of 2 mm thick steel sheet of the specified sections, including iron lugs (hold fasts), iron hinges, conforming to P.W.D. specifications, including bolts for fixing stops, locknotch, provision for receiving door and window frame of size 89 mm X 50 mm with 40 mm wide single rebate(HSR 18.34a)

Factory manufacture solid flush door and Shutters, with block board core as per I.S. No. 1659-1969 bonded with water poof type phenol formal dehyde synthetic resin, hot-pressed, conforming to I.S. 2202 part I and II, fixed in positon includeing iron hinges, screws, chocks/cleats and stops etc. (excluding the cost of any fittings other than specified above, but including labour for fixing the same in position)- as per HSR 17.93 a iii. (Note) :- Commercial veneering with vertical grains or cross bands and face veneer on both sides commercial facing with laminated core and lipped edges. (Duro, Green) 35 mm. Thick (HSR 17.93a iii- note I under 17.18))

Factory manufactured wire gauze door and window shutters of commercial hard wood such as hollock, champ, chikrassy annd chaplash, etc. (non coniferous timber other teak conforming to I.S specification no. 1003, kiln seasoned) with 100 mm wide vertical styles, 150 mm wide lock rail 200 mm wide bottom rail, and wire gauze of 140 G or 120 G designation including cost of iron hinges, screws, chock/cleats, stops nails etc. complete fixed in position (excluding the cost of any fittings, other than specified above, but including labour for fixing the same in position) (i) 30 mm thick (HSR 17.92 (i) - Note I under 17.18

Providing and fixing commercial type block Board, plain lining, butt jointed, including Wooden plugs (teak) placed at 45 cm to 60 cm centres, complete with necessary nails (frame work shall bepayable extra)-19 mm thick(HSR 17.49 b)

Providing and fixing moduler kitchen ward robe under counter cabinet complete in all respect with 19mm laminated boards including the cost of binding tape, SS hinges, screws, chocks/cleats and stops etc of reputed make complete in all respect as per design approved by Engineer-in-charge.(N.S) Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material.

Providing and fixing moduler kitchen ward robe overhead cabinet complete in all respect with 19mm laminated boards including the cost of binding tape, SS hinges, screws, chocks/cleats and stops etc of reputed make complete in all respect as per design approved by Engineer-in-charge.(N.S) Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material.N.S)

Providing and fixing stainless steel baskets in kitchen ward robe of SS grade-304,crome finish fixed on channels of required size complete in all respect as desired by Engineer-in-charge. (The stainless steel basket shall be of premium quality of reputed manufacture) (NS) Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material. (i) Cutlery 17''x20''x4''

Multi Basket 17''x20''x6''

Grain Trolley 17''x20''x12''

Bottle pull out 10''x20''x8''

Plate 17''x20''x8''

Cup& saucer 17''x20''x4''

Carrousal 27''

Providing and fixing channels 20'' complete in all respect (N.S)

Handles and highes of good quality complete in all respect.(N.S) (i) Highes

Handles

Edge biding

Semi-Corrugates asbestos sheet roofing 7 mm thick sheets fixed with G.I hooks and bolts, limpet and bitumen washers complete, fixed in position, excluding the cost of purlins, rafters and trusses(HSR 13.21)

Wrought iron and mild steel (using angles, flats square bars, tees and channels) ladders, grills, gratting frames, window guards, iron doors openable or fixed stair case or parapet or any other type of railing, gates and tree guards etc., including cost (HSR 18.12)

Providing and fixing 3mm Fiber Sheet of reputed manufactures Complete in all respect (N.S) Note:- The agency to whom the work is allotted will have to produce original bill/voucher for all quantity in token of proof of purchase of material

Providing and fixing in position best indian make (as approved by the engineer-in-charge European type water closet suite, syphonic type consisting of- (i) VITREOUS CHINAWARE SYPHONIC SUITE WITH 15 LITRES CAPACITY MATCHING CHINAWARE CISTERN and all internal brass fittings COMPLETE WITH ‘P’ or ‘S’ TRAP with or without vent; (as approved by the Engineer-in-charge). (ii) One piece SEAT AND LID IN HOLLOW BLACK OR WHITE PLASTIC fitted with chromium plated hinges and rubber buffers, (to the approval of the Engineer-in-charge) COMPLETE in all respects INCLUDING CUTTING AND MAKING GOOD THE WALLS AND FLOORS. (A) Single trap symphonic W.C. Suite (i) Single Color. [HSR 30.5 (a) (i)].

EXTRA OVER item nos. 30.3 to 30.6 FOR PROVIDING AND FIXING BEST INDIAN MAKE PLASTIC HYGENIC SEAT with lid complete instead of hollow Black or white plaster seat and lid. White plastic seat (Solid)(HSR 30.13 i)

Providing & Fixing in position best indian make (ordinary) Lavatory in VITREOUS CHINAWARE size as given Below (to the approval of the Engineer-in-charge) including china plug for tap hole where necessary; Size 560 mm x 450 mm with one no. tap [HSR 30.41(a)(iv)].

PROVIDING AND FIXING IN POSITION BEST QUALITY STAINLESS STEEL SINKS WITH COMPLETE FITTINGS AS FULLY DESCRIBED IN ITEM NO. 30.51 ABOVE. 600 mm x 450 mm x 200 mm(HSR 30.53a)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE TOWEL RAILS FIXED in with rawlslugs embedded in walls with C.P brass screws. Complete in all respect INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC. C.P brass towel ring.(HSR 30.68e)

PROVIDING AND FIXING IN POSITION GLASS SHELF FIXED IN WITH RAWL PLUGS WITH C.P BRASS SCREWS COMPLETE INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC. With C.P brass brackets and guard rail 600mmx125mm (HSR 30.69a i)

Providing and fixing in position best Indian make Soap dish fixed into wall with C.P brass screws and complete in all respects including cutting and making good the wells etcs. CP brass Soap dish 160 mm(HSR 30.70a-i)

Providing and fixing in position 15 mm I/d C.P. brass bib cocks of best quality (as required by the engineer I charge)(HSR-30.75)(a) Bib cock long body

Providing and fixing in position 15 mm I/d C.P. brass bib cocks of best quality (as required by the engineer I charge)(HSR-30.75)(c) Bib cock

Providing and fixing in position C.P brass stop cocks (as approved by the Engineer-in-Charge)(HSR-30.76)a) 15mm stop cock -i) Stop cock male and female end.

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE SHOWER WITH 15 OR 20 I/D INLET C.P brass telephonic shower.(HSR 30.66d)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE FLEXIBLE TUBE CONNECTION C.P Brass 15 mm x 450 mm(HSR 30.82 b-iii)

Providing and fixing HDPE water storage tanks of sintex, Diplast, O.K. supreme make with covers/lids marked with IS:12701 on roof top of buildings including cost of hoisting and placing Iin position, making connections with inlet and outlet pipes, providing overflow and scour provisions with suitable plug on scour pipe including cost of nipples, washers, flanges for connections in tanks complete in all respects to the satisfaction to the Engineer.(HSR-30.119) 1000 Ltr. Cap.

CONSTRUCTING BRICK MASONRY INSPECTION CHAMBER SIZES AS GIVEN BELOW UPTO 0.60 METRE AVERAGE DEPTH in cement Mortar 1:5 LIME CONCRETE with 40 percent lime mortar 2:3 in foundation Cement mortar 1:2:4 BENCHING 12 mm THICK CEMENT PLASTER 1:2 with a floating Size 450 mm x 600 mm inside Size 450 mm x 450 mm inside (with 455 mm x 455 mm cover and frame light duty single seal weighing 40 kg with C.C. topping )(HSR 29.84a)

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 15 mm dia nominal bore(DSR 18.10.1) Make:- UNIK, TATA, ZOLOTO.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 20 mm dia nominal bore(DSR 18.10.2) Make:- UNIK, TATA, ZOLOTO.

Providing & Fixing PVC Rainwater Pipe 6 kg. pressure of ISI mark in cement mortar during masonry work. [HSR 13.89] Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material. (a)100MM dia PVC pipe 6Kg. Pressure

Providing and fixing PVC Bend ISI Mark. (a) 100 mm dia PVC Bend (Note:- Reputed make PVC Bend such as Supreme, Finolex, Prince will be used as approved by Engineer-in-charge. [HSR 13.90] (a) 100MM dia PVC pipe 6Kg. Pressure

Recovery of Old Materia Door @ 15/- P.KG Note:- In Case of any difference in the DNIT & Nomenclature of any of HSR Items of Civil, PH Work Depicted in this DNIT and that given in HSR, the unit and nomenclature given in HSR shall be applicable

R K Chandra Construction