Repair and Replacement of Bearings and Thrust Bearing assembly of deep well turbine pumpset no.02 at bidargudu jackwell and SITC of LTAC panel and Stand-by Battery Charger in Jackwell bidragudu of kabini water supply scheme.

Repair and Replacement of Bearings and Thrust Bearing assembly of deep well turbine pumpset no.02 at bidargudu jackwell and SITC of LTAC panel and Stand-by Battery Charger in Jackwell bidragudu of kabini water supply scheme.

Disconnecting the cable connections from terminals of 450 HP Vertical Flanged mounted Motor of Vertical Turbine Pumpset without damaging any parts, removing the aligning nut bolts and earthing, Decoup...

Removing Coupling (half) of Oil Lubricated VT Pump alter decoupling motor from Pumpset head, disassembling the Ball Bearing housing, Ratchet assembly, Bearing Distance Piece and Oil seal piece from Tr...

Dismaning of Oil Lubricated VT Pump column assembly by first sassembling the Gland and Gland packing Removing the gland packing Tube Tension plate along with Check mit, lining of Top colorun Pipe and ...

Repair, reconditioning and Balancing of stainless steel 410T Grade 70 mm OD x 2430 nm in length impeller shaft by removing out, grinding maching threading etc complete as per the directions of Enginee...

Repair, reconditioning and Balancing of stainless steel 4107 Grade 70 mm OD Line shafts by removing out. grinding, machining, threading et complete as per the directions of Engineer-in-charge

Supply & fixing of suitable size Suction Case Bearing made of Bronze suitable for oil lubricated VI pump conforming to IS 318 Gr LTBZ including cost of cutting machining and threading, etc. complete a...

Supply & fixing of suitable size Bowl Bearing made of Bronze suitable for oil lubricated VT pump conforming to IS 318 Gr LTB2 including cost of cutting, machining and threading, etc., complete as dire...

Supply & fixing of SS 410 grade 70 mm dia shaft coupling and suitable for oil lubricated VT pump conforming to ASTM A276 55410 including cost of cutting machining and threading, etc., complete as dire...

Supply & fixing of suitable size Shaft Bearing made of Bronze suitable for oil lubricated VT pump conforming to IS 318 Gr LTB2 inchiding cost of cutting machining and threading, etc., complete as dire...

Labour charge for Reassenbling of rotating element and all the dismantled parts of 450 HP VT pump set: like re- fixing the of strainer Suction Case, Bowl assembly consisting of impeller and allied acc...

Repair to the cone of thrust bearing and fabricating and fixing of MS Oil Seal contorming to IS:2026 suitable for 450 HP VT pump by making new white metal lining and making proper balancing including ...

Supply of SKF (29326E) of Eqquivalent make spherical roller thrust bearing Suitable for radial load and axial load of Vertical Turbine Pumpset and fixing to thrust bearing assembly conforming to the m...

Supply & fixing of suitable size Bearing Distan Piece of CFG-200 Conforming to IS:200 Suitable for 400 HP Oil lubricated VT pump having a 70mm dia head shaft including cost of material, labour, Machin...

Supply of SKF (6222E) or Equivalent make single ruw groove ball bearing Suitable for Vertical Turbine Pumpset and fixing to thrust bearing embly conforming to the minimum basic rating ile L10 (1000,00...

Cleaning the inside surface of the Bearing Housing providing and fixing of newly supplied cork sheet oil packing in required shape and size fixing the bearing assembly. Ratchet assembly etc with the h...

Supply & fixing of suitable ratchet pins for ratchet assembly of 450 HP Oil Lubricated VT pump including cost of reconditioning of Ratchet assembly by making proper balancing including cost of removin...

Reassembling of all the dismantled parts of pump set, like re-fixing the bearing housing, pump coupling to its original position, making alignment with motor, fixing coupling bolts, nuts, Providing Te...

Supply and installation of floor mounting type LTAC panel of approved

make fabricated from sheet metal and painted with provision for

suitable incoming and specified number of outgoing feeder inlets w...

BATTERY CHARGER: 110 V, 15 A float and 30 A boost (with float and

boost battery charger as per technical specification).(10.2.4)

Erection of Battery Charger and wiring 110 V, (28,B-II)

Testing & Commissioning of Battery Charger Wiring: Identification, ferruling,crimping & connecting i) AC supply cable upto 2 sources ii) Load cables, connection at charger end upto 10 load points

i) Fixing of Boost Voltage level

ii) Fixing of Float Voltage level

iii) Fixing of Trickle Voltage level

iv) Testing of alarm, indication and load ckts, auto/manual change overs etc.,