Construction of Multiporpose Sports Cum Circular Activity Complex at Government College Una District Una HP

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required and approved by the Engineer-in-Charge. Group C.

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required and approved by the Engineer-in-Charge.

Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required and approved by the Engineer-in-Charge .

Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required and approved by the Engineer-in-Charge.

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required and approved by the Engineer-in-Charge. 2x1.5 Sq. mm.

2x 16 Sq. mm..

4x16 sqmm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 3x1.5 sqmm.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. and approved by the Engineer-in-Charge. 5/6 amps switch.

3 pin 5/6 A socket outlet

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required and approved by the Engineer-in-Charge.

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required and approved by the Engineer-in-Charge.

Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.and approved by the Engineer-in-Charge

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required and approved by the Engineer-in-Charge Single pole. Cat-A.

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required and approved by the Engineer-in-Charge. 40 Amps. Cat-A. 63 Amps. Cat-A.

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required and approved by the Engineer-in-Charge. 63 Amp

Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required and approved by the Engineer-in-Charge 63Amps. Cat-A.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required and approved by the Engineer-in-Charge. (But without MCB/RCCB/Isolator) 12 way (8+36)

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreadle in existing cubical panel board including drilling holes in cubical panel, making connections, etc as required and approved by the Engineer-in-Charge. 100 Amp, 16KA, TPMCCB.

200 Amp, 25KA, TPMCCB

Earthing with G.I earth pipe 4.5 mtr. long and 40mm dia, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal or coke and salt complete as required and approved by the Engineer-in-Charge.

Supplying and laying 6 SWG GI wire at .50 meter below ground level for conducter earth electrode , incl connection/termination with G.I thimble etc. as required and approved by the Engineer-in-Charge.

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation and refilling the trench etc.as required , but excluding sand cushioning and protective covering: and approved by the Engineer-in-Charge Armoured cable 50sq. mm (3.5 core)

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size and approved by the Engineer-in-Charge. Armoured cable 50 sq. mm (3.5 core)

Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required and approved by the Engineer-in-Charge.1200 mm

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required and approved by the Engineer-in-Charge Exhaust Fan, light duty, 300 mm sweep

Providing and installation of following type of LED batten with aluminium housing, anti glare polycarbonate diffuser and energy efficient constant current, integral electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, including mounting clamps, connections, testing etc. as required: and approved by the Engineer-in-Charge .LED Batten Light 24W

Supplying and fixing of fancy wall bracket suitable for input voltage: AC 220- 240 V, 50/60Hz, complete with all accessories, lamp holder, but excluding lamp including making connections, testing etc. as required of Approved Make Wall light fixture Polycarbonate body, suitable for 9 W retrofit LED lamp B22 base and approved by the Engineer-in-Charge: .

Providing and installation of following type of surface/recessed mounting square/round type LED panel 6 wattLight with aluminium die cast housing in white finish with anti glare polycarbonate diffuser and seprated energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing etc. as required: of Approved Make and approved by the Engineer-in-Charge:

Providing, and fixing of Fan Box as required and approved by Engineer in charge.

Providing and fixing LED Mirror light 5 W LED 6000 K Decorative ultra slim round profile LED lighting fixture with extruded polycarbonate product code LHEXBLP7IN1W005 cool white of Havells or equivalent make as required and approved by the Enginner-in-Charge.

Supplying and erection of following depth sheet metal cubical pedestal of suitable dimensions with plus-minus 5 cm variation made from (50 mm x 50 mm x 6 mm thick) M.S. angle iron frame, covered with 1.6 mm thick M.S. sheet duly welded on five sides & front side hinged, complete with locking arrangement with sufficient No. vertical and horizontal intermediate switchgear supporting members each of M.S. flat 50mmx6mm thick of suitable length duly welded. The cubical pedestal shall have cable entry box at one or two sides and 4 No. legs of 50mmx50mmx6mm thick M.S. angle iron each 60 cm long including, powder coated painting and bonding to the existing earth etc., the same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form: and approved by the Engineer-in-Charge: 300 mm deep (nominal)

Supplying and fixing Aluminum alloy or wrought aluminium strip bus-bars, suitable for 200 Amp. 415 volts capacity 4 No. each of cross-sectional area (38mmx6mm), in the existing enclosure or cubical panel with all accessories including connections etc. as required:-

Supplying and fixing of Led lamp 9 watt of Havells and equivalent Make as required approved byand approved by the Engineer-in-Charge.

Supplying and fixing of HEXA 10 W IP66 Bulk Head Product code HEXAFT10WLED857SSYMBOPC of havells and equivalent Make as required and approved by the Engineer-in-Charge.

Providing and installation of LED street light 30watt made up of aluminium housing with high power LED IP 66 protection code ENXTP36WHCRPCSD complete with all accessories ( GI pipe 32mm dia a/w Clamp/ nuts bolts), including mounting clamps, connnections, testing etc. BAJAJ or equivalent make as requird and approved by the Engineer-in-charge.

VARUN RATTAN GOVT. CONTRACTOR

kishori Lal Sharma

kamaljeet sharma