SPL REPAIR OF BLDG NO NP-14 AND NP-15 (JCOs BATHROOM) FOR TILLING, ELECTRIC WIRING, WATER SUPPLY FITTING WITH SINTEX AND INDIAN TOILET SEAT CHANGE OF 118 (I) INF BDE GP OMC UNDER AGE (I) NIMU AND SPL REPAIR TO FALSE CEILING OF BLDG NO T-137 (OTM) OF

Taking down Chowkhats or frames exc 1.5 Sqm but not exc. 4 sq. m each (without taking off shutters from the frames) complete all as specified and directed.

All as per item above heer-in-before but n.exc 1.5 Sqm (without taking off shutters from the frames) complete all as specified and directed.

M&L 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

M&L 2nd class hardwood 35mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats for doors complete all as specified and directed by Engr-in-charge.

S&F Mild steel 100mm long Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed by Engr-in-charge.

S&F extruded aluminium alloy handles, fabricated type, anodised 150mm long complete all as specified and directed by Engr-in-charge.

S&F Mild steel sliding door bolts 250mm, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 250mm long complete all as specified and directed by Engr-in-charge.

S&F Aluminium anodised, barrel tower bolt of extruded section and fixed, 150mm long (ISI marked), complete all as specified complete all as specified and directed by Engr-in-charge.

M&L for preparation of new wood surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying two coats of Synthetic enamel (ordinary tint) over a coat of pink primer complete all as specified and directed by Engr-in-charge.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L Non - skid Ceramic coloured tiles tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,, in floors etc over Screed bed or bedding layer of mortar 15 mm thick in CM 1 : 4, over and including 25 mm thick under layer of PCC 1 : 2 : 4 to bring the work in proper levelling set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L Glazed ceramic Coloured tiles tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick cement plaster in CM (1 : 4) complete all as specified and directed.

Taking down cement or cement lime plaster, any description, on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

Demolition in precast cement concrete walling built in cement mortor including all quoins, arches, pillars, etc all as specified.

M&L for PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate ) block masonry with solid block exc 10cm in width and set as in wall etc in CM 1:4 complete all as specified and directed.

M&L for Rendering 10mm thick on fair faces of brickwork or concrete surfaces in cement mortar (1:6) and finished even and smooth without using extra cement all as specified and directed.

M&L for Rendering 15mm thick on fair faces of brickwork or concrete surfaces in cement mortar (1:4) and finished even and fair without using extra cement all as specified and directed.

M&L preparing new plastered surfaces of walls and applying three coats of white wash on walls all as specified and directed.

M&L preparing new plastered surfaces of walls and applying two coat of cement base paint over a coat of primer all as specified and directed.

Dismantling water tanks Exc 500 & N.exc 1000 litres capacity complete all as specified and directed.

S&F 1000 ltrs capacity Rotational moulded polythene water storage tanks (cylindrical vertical with closed top, two layers) hoisted and fixed in position complete all as specified complete all as specified and directed.

S & F 25mm dia nipple suitable for water tank complete all as specified and directed.

S & F in repair 25mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S & F in repair stainless steel/PTMT Gratings 100mm dia complete all as specified and directed by Engr-in charge.

Taking up/down 20mm bore old tubing on walls and connection of size 20mm bore complete all as specified and as directed complete all as specified and directed.

M &L 25mm outer dia of (3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

S & F in repair 15mm dia Pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed fancy type complete all as specified and directed.

S & F in repair for 15mm PVC connection of 600mm long complete all as specified and directed.

S & F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long.

S & F in repair 20mm dia CP single towel rail 600mm long D type incl a pair brackets fixed to wall complete all as specified

S & F in repair 15mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed fancy type complete all as specified and directed.

S&F in repair 15mm Angle/Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair 20mm Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S & F in repair PVC valveless, syphonic action type, flushing cistern 10 lts capacity, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repair vitreous china wash basin white flat back size 550x400mm ovel type/round /any shape (including tap, waste chain and plug and porcelain stopper and brackets all complete complete all as specified and directed.

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including provision of lime concrete bedding (excluding flushing cistern and flush pipe) complete all as specified. and directed.

Demolition and breaking up drain 100/75mm dia pipes (Salt glazed ware, AC, PVC or Reinforced concrete) set in cement mortar complete all as specified. and directed.

S&F in repair PVC (SWR) pipes single socketed 75mm dia pipe, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

All as per item here-in-befor but 110mm dia pipe complete all as specified and directed.

S&F in repair PVC (SWR) floor trap 75mm, plain with grating including jointing with solvent cement complete all as specified and directed.

All as per item here-in-befor but 125/110 mm complete all as specified and directed.

M&L Concrete bed to drain pipes 100mm bore including packing under and completely surrounding pipes with concrete after they are laid and tested; in complete all as specified and directed.

All as per item above here-in-before but 75mm bore complete all as specified and directed.

Dismantling timber scantling 40 sqcm and over in section, in any position in framed work in scantling etc complete all as specified and directed by Engr-in-charge.

M&L second class Hard wood in clean sawn timber fixed and fixed in scantlings complete all as specified and directed by Engr-in-charge.

Dismantling timber scantling as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section in any position as in framed work complete all as specified and directed by Engr-in-charge.

M & L for 2nd class hard wood Plain fillets. exc. 13 & n.exc 25 Sq cm as in square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and directed by Engr-in-charge..

All as per item No 48 , but exc 3 & n.exc 6 Sq cm in bullnosed, splayed, chamfered or rounded on one edge or face as in beadding complete all as specified and directed by Engr-in-charge.

Dismantling wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness including cover fillets complete all as specified and directed by Engr-in-charge.

M & L Prelaminated particle board 9mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails in ceiling, flat or sloping to timber frame work complete all as specified and directed by Engr-in-charge.

M&L for preparation of old painted steel surfaces of any descripation over 10cm width or girth, not otherwise described and applying one coats of Synthetic enamel( ordinary unit) complete all as seecified abd directed by Engr- in-Charge.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc

M&L for point wiring with PVC insulated single core cable of stranded copper conductors of size 1.5 sqmm, 1100 volt grade drawn in and including rigid PVC casing caping accessories lain on wall/ceiling surface and fixed with PVC saddles and back-plate and GI screws, including PVC insulated single core cable of stranded copper conductor of size 1.5 sqmm as earth continuous wire connected to common earth and PVC Board for housing like switches, sockets, fan regulators etc all as directed for following :- (a) One light point/one fan point controlled by one switch

M&L for point wiring with PVC insulated single core cable of stranded copper conductors of size 1.5 sqmm, 1100 volt grade drawn in and including rigid PVC casing caping accessories lain on wall/ceiling surface and fixed with PVC saddles and back-plate and GI screws, including PVC insulated single core cable of stranded copper conductor of size 1.5 sqmm as earth continuous wire connected to common earth and PVC Board for housing like switches, sockets, fan regulators etc all as directed for following :- (b) One 3 pin 5 amps socket outlet independent with cables 1.5 sqmm size

M&L for point wiring with PVC insulated single core cable of stranded copper conductors of size 1.5 sqmm, 1100 volt grade drawn in and including rigid PVC casing caping accessories lain on wall/ceiling surface and fixed with PVC saddles and back-plate and GI screws, including PVC insulated single core cable of stranded copper conductor of size 1.5 sqmm as earth continuous wire connected to common earth and PVC Board for housing like switches, sockets, fan regulators etc all as directed for following :- (c) One 3 pin 5 Amp socket outlet on same board.

All same as per item No 55 above but with conductor of size 4 sqmm (Nominal area) for one 3 pin socket outlet 15 Amps on independent board complete and earth continuity wire with 4 sqmm PVC insulated stranded copper conductor cable.

S&F socket 2 in 1, 5 pin 5 Amp flush type complete all as specified.

S&F switch piano flush type 5 Amp, single pole, one way complete all as specified and directed.

S&f Switch socket combination 2 in 1, 3 pin, 5 Amp flush type complete all as specified and directed.

S&F switch Socket Combination 2 in 1, 3 pin, 15/16 amp flush type Universal complete all as specified and directed.

M&L for ceiling rose surface Bakelite 65x50mm two to three terminal complete all as specified and as directed by Engr-in-Charge.

S&F basic all purpose surface and wall mounted LED batten with polycarbonate housing and integreted electronic driver of cap 20 watt, 4 feet long, with all accessories complete all as per specified and as directed by Engr-in-Charge.

Supply and fixing LED lights fittings 10/12 watt, 220 v, AC decorative box type with driver , holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

S & F in repair LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.

Supply and fix in replacement exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as per specified and as directed by Engr-in-Charge.

Dismantling and Taking down old Street light building security light fitting from poles, flood lights and post top lanrern light and garden light for replacement with LED fittings all as specified and as directed by Engr in Charge.

M&L GI bracket 1.5 mtr long made out of GI pipe 40mm dia bend to suitable radius incl clamps nuts bolts washer incl painting with aluminum paint etc complect all as specified and directed by Engr in Charge.

Supply and fix LED Street light fitting 60 Watt 230V AC outdoor type with high pressure die cast aluminum hosing and heat resistane complete with driver lamp bracket with impact and corrosion resistant including thermal managenent in multiple optics complete with IP 65/66 peotection complete as per specified and as directed by Engr in Charge.

Supply and laying or fixing in repair or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 2 core, 10 sq. mm nominal cross section in service connectionsall as per specified and as directed by Engr in Charge.

S&F in repair sheet metal powder coated versatile Double door SPN distribution board, 4 way suitable for MCB's fitted with copper bus bar rated 200amps, neutral link , earth bar and din rail suitable for use on 240 Volt, 50Hz as per specified and all as directed by Engr in Chrge.

M&L in repair for MCB SPN 40 - 63 Amp, 240V with 10KA breaking capacity of 'C' series in distribution boards all as specified and directed.

S&F in repairs to MCB SP 6-32 Amp with 10KA breaking capacity of 'C' series in distribution boards all as specified and directed.

M&L in repair Earthing complete with galvanised steel earth plate electrode of size (600 x 600 x 6.3) mm thick buried directly into ground vertically to depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, surrounded on all sides by alternate layers of 150 mm thick charcoal and common salt, connected to galvanized earh lead wire of size 4.0 mm dia by means of lugs, bolts, nuts, washer, check nuts of galvanised iron or steel all as shown in Electrical plate No. 3, wire protected by dia 15 mm bore light grade GI Pipe laid in floor and fixed to wall with proper size of clamps and watering pipe of bore 20 mm dia GI light grade including wire mesh funnel, PCC, earth chamber pit with PCC 1:2:4 type B-1 using 20 mm grade stone aggreate including form work cement mortar including CI Pit cover with frame necessary excavation and earth work in any type of soil including testing on completion for desired result all as specified.