New Installation of tandem belt conveyor for 37EL district in RIV seam of Khottadih Colliery, Pandaveswar Area.

Amount

New Installation of tandem belt conveyor for 37EL district in RIV seam of Khottadih Colliery, Pandaveswar Area. (Inclusive of CMPF and Contractor Profit)

Complete Installation after Transportation & with Necessary Fabrication of 700 mtrs 1000 mm width, 90Kw Belt Conveyor at 37EL tandem belt in R-IV Seam which includes 1) Transportation, Carrying from Surface & Fitting of Discharge Head (800 X1400 mm) with Deck Plate, Chute, scrapper and 08 nos of Girders (125 X 250 mm) - 3.0 MT 2) Transportation, Carrying from Surface & Fitting of Drive head with Gear Box & Motor – 7 .5 MT 3) Transportation, Carrying from Surface & Fitting 2 nos. of load table one for Discharge & 2nd for Tail End& decking plate – 3.0 MT. 4) Transportation & Fitting including grouting of Tail end Assembly with V-Scraper & Decking fabrication & Fitting - 1 MT 5) Transportation, Carrying from Surface & Fitting Loop take up assembly with heavy duty mechanical Winch. & Bend Pulley frame - 3.0 MT, 6) Fitting Complete 700 mtr Structure with Top & Bottom Rollers after transported from surface to work site laying ,and, fitting @ -68Kg-per-mtr, - 47.60MT

Fabrication of two no of hopper 04 mtrs long which including labour cost, oxygen, DA and welding

Fabrication of one no. of tail-end assembly which including labour cost, oxygen, DA and welding

Fabrication of loop take up assembly with trolley which including labour cost, oxygen, DA and welding and making 4 nos. of pullies

1000 mm PVC Belting transportation from surface, laying, jointing tensioning trail run etc.

1)Holding down bolts of Drive Hd & Stucture , Loop Take Up triangular Frame and Tail End. – 40 Nos 2) 16 Times tail-end fixing (09 Nos each time) - 144 nos

Transportation of ACB, starter & PVC cable, Pull Cord, Signaling System etc surface to site.

16 times belt extension including Tail End Assembly and hopper Shifting - 14 hds. x 1.5 shifts = 21 hds. for one extension, semi Skilled – 6 hds. @Rs.1351.56/- + un skilled 15 hds. @Rs.1280.95/-

Fencing of Drive Head, Loop Take Up and Tail End ( Tail End fencing 8 times) including oxygen, DA & welding electrode

Consumable Nut & Bolt 1/2” X 11/2” – 281 Kg, 5/8 “X 2“ -40 Kg, Plain washer- 40 Kg, 5/8" X 21/2"-10 Kg

Hanging by vartical support 35 mtr. length conveyor structure providing M.S. channel

Dismantling and salvaging of 265 metre conveyor structure with top and bottom rollers from 6WD dist. of RV seam and kept at surface 265mtr@68kg/metre

Fabrication of drive head assy. including coupling & welding & machining of bearing position of drive and driven drums

Total impact of GST for the purpose of CTC

SABIR CONSTRUCTION

BABLU SINHA