Provision of chequered tiles flooring, provision of door number plates, post boxes, door key holes for SOs EPs Md Accn of ICGS Ratnagiri and provision of certain E M minor works at ICGS and ICGAS Ratnagiri

Amount

M & L for Chequered cement concrete tiles 30cmx30cmx25mm thick, glossy finish set with white cement and pigment, jointed and pointed in neat cement slurry in floors Screed bed or bedding layer of mortar 15 mm thick in CM 1:4 for laying floor finishes complete all as specified and directed by Engr-in-Charge.

S & F Door number plates of size 160mmx100mmx5mm with white vinly background acrylic material complete all as specified and directed.

S&F for Copper body adjustable 200 degrees wide angle peep sight hole home security door viewer with all necessary accessories complete all as specified and directed.

S &F Wall mount powder coated GI body letter box of size 32x28x8 cm with key lock facility and all necessary accessories required for wall mount complete all as specified and directed.

Dismantling and taking down old CTs and supply, install, test and commissioning HT 11KV CTs (Currennt Transformer) indoor type suitable for 3 phase 4 wire metering arrangement in existing Metering cubical consisting of 03 Nos resin cast CTs of ratio 25/5-5 Amps class 0.5, 10VA STC 6.7 KA Bfor 1 sec suitable for 03 Nos PTs of ratio 11KV/√3/110v/√3 class 0.5, 50 VA burden of department approved make duly tested by Maharashtra State Electric Board(MSEB) complete with all as per specification of Maharashtra State Electric Board(MSEB). Note: i) Testing of CTs and metering cubical after installation of CTs from MSEDCL are deemed to be included in the quoted rate. ii) The work shall be carried out through MSEDCL approved Licensed contractor. iii) old CTs are taken on Charge for safe custody.

Supply fixing testing and commissioning of shunt reactor of capacity 10KVAR outdoor type made out of CRCA sheet 3mm thick confirming to IP 54 and with minimum dimension 500(W)X500(D)X600(H)mm suitable for rated current 13.91 A 415 V 3 phase 50 Hz system with over current factor 1.1 continuous and tapping at 5/7/8/9 Kvar with +- 5% tolerance on inductance with Air Natural(AN) cooling and insulation level class 'Fwith cargo core and aluminium winding and max temp rise at 90 degree and approx losses 300 W at 10 Kvar including suitable size of cable connection from APFC to shunt reactor including PCC foundation, excavation, filling etc complete all as specified.

Supply and installation of fast earth electrode 3.0 mtr length size model F84, having two M S pipe one inside the other with proper not deep galvanised outer dia 88 mm and inner dia 48 mm and the cavity between the rod pipes is filled with ground resistance improment powder, sealed with both end the outer pipe of electrode should be zink coated, the electrode should burried directly in the ground by making boring of diameter 10" with boaring machine highly conductive non magnetic and non corrives is to be connected with Gl strip 25 X 3 mm of 2 to 3 mtr length to facilitate further connection to earth dolly and provision of earthing chamber in bricks wall size 45 x 45 x 15 cm an having PCC cover of required size complete all as directed and all as per IS 3034 (1981) Note: Gl strip to be measured and paid separately.

M&L for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc as required with GI strip 32x6mm.

Supply & fixing Solar LED Street lighting system, rated lamp wattage of 20W, consist of Solar LED luminare, solar polycrystaline panel, solar low maintenance tubular lead acid/ litiumferrousphosphate battery, inbuilt GI Battery Box and 6m Galvanised Octagonal Pole with arm complete all as specified and directed by Engg-in-Charge

Excavating in trenches in soft/disintegrated rock, n exc 1.5m wide and n exc 1.5m in depth; for foundation of pole/cable laying etc. exc 10 sqm on plan and not exc 1.5m in depth and getting out completed all as specified and directed by Engg-in-charge.

Removing excavated soil materials n exc 50 m and depositng where directed at a level n exc 1.5 m above the starting point completed as specifeid and directed by Engg-in-charge.

M/L for plain cement Concrete(1:4:8) type D2 using 40mm graded stone aggregate in foundations filling and mass concrete complete all as specified and directed by Engg-in-charge.

M/L for plain cement Concrete(1:3:6) type C1 using 20mm graded stone aggregate in foundations filling and mass concrete along with copping complete all as specified and directed by Engg-in-charge.

Advait Enterprises