Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.9 LAccepted-AOC | ₹11.9 L Quoted ₹12.1 L | L1 | Accepted-AOC Being L1 bidder |
| 2 | L2₹12.5 L+₹48,175.11 (3.99%)Rejected-Finance H NO 411 SECTOR 4 CHANNI HIMMAT JAMMU 180015 J K | JAMMU | JAMMU | J K | 180015 | ₹12.5 L+₹48,175.11 (3.99%) | L2 | Rejected-Finance Being other than L1 bidder |
| 3 | L3₹12.7 L+₹59,095.72 (4.90%)Rejected-Finance | ₹12.7 L+₹59,095.72 (4.90%) | L3 | Rejected-Finance Being other than L1 bidder |
| Sl No | Description | Qty | Unit | Mehar Enterprises L2 | M/S AMAR SINGH L1 | SHUBHAM ENGINEERS & BUILDERS L3 |
|---|---|---|---|---|---|---|
| 1.00 | M & L for Non-Skid ceramic Coloured Tiles 7 to 8mm thick (squre/rectanglar) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors over 15 mm screed bed or bedding layers in cement mortar 1:6 Set and Jointed in neat Cement Slurry and Pointed in Colour Cement to match,and removing serviceable tile to store and rubbish off the premises incl dismantling of floor,hearth or wall tiling includinguding cement mortar bedding but not backing and rubbish off the premises.complete all as specified and directed by Engr-in-Charge | 85.2 | Sqm | 1,460 ₹1,24,392 | 1,300 ₹1,10,760 Lowest | 1,360 ₹1,15,872 |
| 2.00 | Taking down shutters of any description area exceeding 2 Sqm each complete all as specified and directed. | 6 | Each | 130 ₹780 | 20 ₹120 Lowest | 80 ₹480 |
| 3.00 | S &F Flush shutters 30mm thick, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed by Engr-in-Charge | 12.3 | Sqm | 2,890 ₹35,547 | 2,000 ₹24,600 Lowest | 3,450 ₹42,435 |
| 4.00 | S&F in repairs stainless steel wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with beading to wooden frames all as specified and as directed. | 14.4 | Sqm | 469 ₹6,753.6 Lowest | 1,500 ₹21,600 | 480 ₹6,912 |
| 5.00 | Preparing surfaces of any description not otherwise described over 10 cm width or girth of new or previously untreated wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge | 13.5 | Sqm | 96 ₹1,296 | 120 ₹1,620 | 85 ₹1,147.5 Lowest |
| 6.00 | S&F 300mm Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing blots & sliding bolts of extruded section or cast aluminium alloy & fixed complete all as specified and directed by Engr-in-Charge | 6 | Each | 333 ₹1,998 | 300 ₹1,800 Lowest | 430 ₹2,580 |
| 7.00 | S&F Aluminium, anodised barrel tower bolts of extruded section and fixed for 200 mm length complete all as specified and directed by Engr-in-Charge | 6 | Each | 99 ₹594 Lowest | 200 ₹1,200 | 110 ₹660 |
| 8.00 | S&F Aluminium handles, 150mm fabricated type anodised complete all as specified and directed by Engr-in-Charge | 12 | Each | 86 ₹1,032 Lowest | 250 ₹3,000 | 99 ₹1,188 |
| 9.00 | S&F 100mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed by Engr-in-Charge | 18 | Each | 55 ₹990 Lowest | 200 ₹3,600 | 65 ₹1,170 |
| 10.00 | S&F in repair aluminium door closer (aluminium extruded section) hydraulically regulated designation No 3, universe type, suitable for door shutte of 851 mm to 1000 in width and of weight 61 to 80 kg | 2 | Each | 1,660 ₹3,320 | 1,200 ₹2,400 Lowest | 1,200 ₹2,400 Lowest |
Tender Value
₹14.5 L
EMD Value
₹29,100
Closing Date
23 May 2026, 6:00 pmClosed
GE 865 EWS
GE 865 EWS PIN-913865 c/o 56 APO
SPL REPAIR OF BLDG NO TO-361 OF 1801 PNR UNIT UNDER GE 865 EWS LEH
2026_MES_763123_1
865/EWS(NIT-70)/2026-27
Open Tender
Civil Works
Item Rate
180 days
GE 865 EWS
Please refer Tender documents
9 documents required · 9 mandatory
₹500
GE 865 EWS
₹29,100
Yes
12 Aug 2026
2 May 2026
1 Jun 2026
2 May 2026
23 May 2026
17 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | M & L for Non-Skid ceramic Coloured Tiles 7 to 8mm thick (squre/rectanglar) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors over 15 mm screed bed or bedding layers in cement mortar 1:6 Set and Jointed in neat Cement Slurry and Pointed in Colour Cement to match,and removing serviceable tile to store and rubbish off the premises incl dismantling of floor,hearth or wall tiling includinguding cement mortar bedding but not backing and rubbish off the premises.complete all as specified and directed by Engr-in-Charge | 85.2 | Sqm | - | - |
| 2 | Taking down shutters of any description area exceeding 2 Sqm each complete all as specified and directed. | 6 | Each | - | - |
| 3 | S &F Flush shutters 30mm thick, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed by Engr-in-Charge | 12.3 | Sqm | - | - |
| 4 | S&F Aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with beading to wooden frames all as specified and as directed. | 14.4 | Sqm | - | - |
| 5 | Preparing surfaces of any description not otherwise described over 10 cm width or girth of new or previously untreated wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge | 13.5 | Sqm | - | - |
| 6 | S&F 300mm Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing blots & sliding bolts of extruded section or cast aluminium alloy & fixed complete all as specified and directed by Engr-in-Charge | 6 | Each | - | - |
| 7 | S&F Aluminium, anodised barrel tower bolts of extruded section and fixed for 200 mm length complete all as specified and directed by Engr-in-Charge | 6 | Each | - | - |
| 8 | S&F Aluminium handles, 150mm fabricated type anodised complete all as specified and directed by Engr-in-Charge | 12 | Each | - | - |
| 9 | S&F 100mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed by Engr-in-Charge | 18 | Each | - | - |
| 10 | S&F in repair aluminium door closer (aluminium extruded section) hydraulically regulated designation No 3, universe type, suitable for door shutte of 851 mm to 1000 in width and of weight 61 to 80 kg | 2 | Each | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.15 MB
TENDERNIT70.pdf
Tender Documents • 0.84 MB
BOQ_854791.xls
BOQ • 1.33 MB
DATE70.pdf
PDF • 8.44 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .