NIT No. 02 (22-23) Item No. 2

Supply of non-clog centrifugal sewage water pump model SHM 200/32 N200*200 mm, with CI impeller, EN-8 shaft & gland packing coupled with kirloskar / BBL make electric motor of 75 HP, 1450 RPM, TEFC, IE2, 415 volt, 3 Phase, 50 Hz, foot mounted, mounted on common base frame, flexible coupling and coupling guard

Supply of LT panel of following specifications: 400A, 36KA FP, MCCB with Thermal Magnetic Release Based (O\C,S\C) RELEASE - ABB - 1 Nos. Spreader Links & Extended ROH for 400A,36KA FP, MCCB - ABB - 1 Nos 3-Phase Digital Multifunction Meter ,CL-1.0, 96x96sq.mm. - Conzerv / L&T - 1 Nos 3-Phase Digital Voltmeter 0-500V ,CL-1.0, 96x96sq.mm. - Conzerv / L&T - 1 Nos 3-Phasc Digital Ammeter 0-400A ,CL-1.0, 96x96sq.mm. - Conzerv / L&T - 1 Nos CT For meter Resin Cast CL-1400A/5A,15VA - AE - 3 Nos CT For meter Resin Cast CL-1400A/5A,15VA for APFC Relay - AE - 1 Nos Phase indication light LED type 220V AC - L&T - Esbee / Vaishno - 1 Set Control MCB SP 6A ,10KA ABB - 3 Nos CT Shorting Terminal - C.Well / Elmex - 4 Nos Neutral Link - Reputed - 1 - Nos. Outgoing Section 1x250A MCCB O/G Feeder 250A,25KA TP, MCCB with Thermal Magnetic Release Based (O/C,S/C) RELEASE - ABB - 1 Nos. Spreader Links & Extended ROH for 250A,25KA TP, MCCB - ABB - 1 Nos. 3x100A MCCB O/G Feeder 318 | Page Delhi Jal Board SOR ( E & M ) 2021 ? 2 2 100A,25KA TP, MCCB with Thermal Magnetic Release Based (O/C,S/C) RELEASE - ABB - 3 Nos. Spreader Links & Extended ROH for 100A,25KA TP, MCCB - ABB - 3 Nos. 6x63A MCB O/G Feeder 63A TPN MCB 10KA - ABB - 6 Nos. Terminal 63A -C.Well / Elmex - 24 Nos. 4x32A MCB O/G Feeder 32A TPN MCB 10 KA - ABB - 6 Nos. Terminal 32A -C.Well / Elmex - 16 Nos. as per S.O.R code 10.1.4

Supply, 1.1 kV grade, XLPE insulated, stranded Aluminum conductor, galvanized steel flat strip / round wire Unarmored, extruded PVC type ST2 sheathed, conforming to IS:7098 (Part-1) & IEC:60502 (Part-1) of following sizes 3 Core x 185 Sqmm S.O.R code 18.1.12

Supply, 1.1 kV grade, XLPE insulated, stranded Aluminum conductor, galvanized steel flat strip / round wire Unarmored, extruded PVC type ST2 sheathed, conforming to IS:7098 (Part-1) & IEC:60502 (Part-1) of following sizes 3 Core x 150 Sqmm S.O.R code 18.1.11

Supply of MS pipe of size 300 mm of thickness 8 mm of heavy class of make Jindal/ DJB approved

Supply of MS pipe of size 200 mm of thickness 8 mm of heavy class of make Jindal/ DJB approved

Supply of MS bend of size 300 mm, Heavy Duty.

Supply of foot valve of size 300 mm dia, heavy Duty O.E.M rates S.O.R code 4.11.1

Supply of MS taper of 300*200 mm as per site requirement

Supply of MS slip on flange of 300 mm

Supply of MS slip on flange of 200 mm of ISI mark

Supply of nut bolt of heavy quality

Supply of rubber packing sheet. Make: Jyoti/national/any DJB approved.

CIDF swing type non return valve as per IS 5312, PN 1.6 CI 13004 , door / bronze to rubber ring / CS 410 tuing pin of 300 mm dia S.O.R code- 14.10.7

CIDF swing type non return valve as per IS 5312, PN 1.6 CI 13004 , door / bronze to rubber ring / CS 410 tuing pin of 200 mm dia S.O.R code- 14.10.7

CI double flanged non rising spindle sluice valve of 300 mm dia PN 1.6 IS :14 Sub, CI / Body / viedge / bronge ring / 55410 shabt contraction & SS CISI maked manual operation.

CI double flanged non rising spindle sluice valve of 200 mm dia PN 1.6 IS :14 Sub, CI / Body / viedge / bronge ring / 55410 shabt contraction & SS CISI maked manual operation.

Supply Co2 Type Fire Extinguisher capacity 4.5 Kgs completes in all respect. Make: - Life Guard/Omex/ IS mark.

Supply of electrical insulated mats of dielectric strength up to 65KV of size (1mX2mX3mm) confirming to IS 15652. Make: -Jyoti/National

Making of RCC foundation of size 1:2:4 concrete including providing fixing of 6 nos. foundation bolt and grouting them with the help of tools and tackles as per satisfaction of Engineer in charge

Fixing the M.S. base frame on the RCC foundation the job includes proper leveling and alignment with the help of labour, fitter, welder. Electrician etc as per satisfaction of Engineer in charge. Installation of the pump ,motor and other accessories with the help of chain pulley/ crane which is in the scope of contractor. Setting as per position with proper alignment and also making of all electrical connections, fitting all valves, bends etc. in original position and testing / commissioning of the pump set on NO load & full load after commissioning of all connections.

HYDROCON ENGINEERS

Super System Engineers

Bansal Engineers and Traders

Gupta Brothers