ADDN ALTN IMPROVEMENT TO L IN ACCN AND PROVN OF LADIES TOILETS AT CERTAIN LOCATIONS FOR AGNIVEER VAYU WOMEN AT AF STN DINJAN UNDER GE (AF) MOHANBARI

Amount

Surface dressing not exceeding 15 cm deep and getting out in soft / loose soil complete all as specified and directed.

Excavation in trenches not exceeding 1.5 M wide and not exceeding. 1.5 M in depth for foundation, etc. and getting out in soft/loose soil complete all as specified and direced.

Excavation in trenches exc. 1.5 M in depth for foundation, etc. and getting out in soft/loose soil complete all as specified and direced.

M & L for hardcore of broken stone or boulders gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and remmed to a true surface complete all as specified and direced.

M & L for PCC 1:3:6 Type C2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and direced.

M & L for formwork to sides of concrete foundation footing ,bases of column and plinth beam and similar work etc complete all as specified and direced.

M & L for mild steel TMT bars 10mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and direced.

M & L for mild steel TMT bars 8mm dia as in stirrups spacer and binder, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and direced.

M&L RCC M-25 (Design Mix) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete complete all as specified and direced.

Returing, filling in, including spreading, levelling, watering and well reamming in layers not exc 25 cm in soft/loose soil complete all as specified and direced.

Removing excavated material as soil exc. 50 m and n exc. 250 M, depositing where directed at a level n exc. 1.5 M above the starting point complete all as specified and direced.

Use and waste form work to sides of columns, square, rectangular, complete all as specified and directed.

M&L RCC M-25 (Design Mix) as in columns, etc, complete all as specified and directed.

M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L brick work with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

M&L for 40 mm thick PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) mixed with integral water proofing compound as in Damp Proof Course including necessary formwork complete all as specified and directed.

Use and waste form work to sides and soffits fo roof beams, lintel beams etc. including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

M&L RCC M-25 (Design Mix) as in lintel beam complete all as specified and directed.

Use and waste formwork to chullah hoods, chajjas, troughs and similar items including edges etc complete all as specified and directed.

M&L RCC M-25 (Design Mix) as in chajjas complete all as specified and directed.

Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L RCC M-25 (Design Mix) (Using 20 mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves complete all as specified and directed.

M&L for 10mm thick rendering in cement mortar 1:4 on fair faces of concrete including preparing the roof surfaces clean, dust free and dry for roof treatment as follows: - (a) One coat of water based bitumen emulsion primer @0.30 Kg/ Sqm to be applied. (b) 3mm thick APP based polymeric water proofing membrane lain on primered surfaces with minimum overlaps maintained as 10 cm with thermo fused torch flame method. (c) Finished the top surface with a coat of aluminum paint @ 110gms/ Sqm.

M & L rendering 5mm thick on soffit of slab in cement mortar 1:3 finished even & smooth with out using extra cement complete all as specified and directed.

M & L rendering 10mm thick,on fair faces of brick masonry surfaces or concrete surfaces on wall in cement mortar 1:6 finished even & smooth with out using extra cement to obtain even and smooth surface complete all as specified and directed.

M & L rendering 20 mm thick in two layers (15+5), on fair faces of brick masonry surfaces or concrete surfaces in cement mortar 1:4 finished even & smooth without using extra cement including use of water proofing compound in outer layer complete all as specified and directed. Note- Water proofing compound used against this item shall be measured and paid seperately.

Supply only liquid water proofing compound ISI marked complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying three coats of white wash on wall complete all as specified and directed.

M&L preperation of newly plastered external wall surfaces and applying two coats of acrylic emulsion weather proof antifungal paint over a coat of Apex primer complete all as specified and directed .

M&L 100mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L coloured Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

Material and labour Glazed cermaic coloured tiles of size 450mm x 350mm x 7mm thick on vertical surface such as dados, skirting, risers to steps etc set and jointed neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles over and including 10 mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as in plinth protection finished even & smooth without using extra cement complete all as specified and directed.

S&F soap dish chromium plated fancy type including fixing with brass screw complete all as specified and as directed.

S&F bib tap 15mm bore chromium plated cast type copper alloy with crutch or butterfly/ handle screwed down, screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F 15 mm bore Stop valve/angle valve chromium plated cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipes or for unions complete all as specified and directed.

S&F vitreous China counter type wash hand basin, white, oval shape, size 550x400 mm complete all as specified and directed.

M&L 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including providing edge moulding to 18-20mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc complete all as specified and directed.

S&F viterous china wash down water closet (EWC) white incl 'P' or 'S' trap incl plastic water closet seat cover white closed pattern with flat bottom and cover incl mild steel chromium plated hinging device complete all as specified and directed.

S&F health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F pillar tap 15 mm bore fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F waste coupling of PTMT for 32 mm bore dia of discharge pipe (half or full threaded) (Minimum weight 45gms) complete all as specified and directed.

S&F 32 mm bore brass chromium plates bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap complete all as specified and directed.

S&F PVC flushing cistern 10 ltr capacity incl PVC connection inlet and outlet connections, brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC complete all as specified and directed.

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm long complete all as specified and directed.

S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F rotational moulded polytheline water storage tank 500 Ltrs capacity (cylinderical / vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S & F 16 mm outer dia 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings, fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

All as per Item No. 50 here in before but 20mm outer dia pipes complete all as specified and directed.

S&F 20mm dia PP-R Gate valves (brass insert) as per requirement of the site complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC (SWR) bends of any radius for 110mm bore PVC pipe complete all as specified and directed.

S&F PVC (SWR) bends of any radius for 75 mm bore of pipe complete all as specified and directed.

S&F MS clamps for PVC (SWR) pipes 75mm bore made out of 50mm x 5 mm flat and 16 mm dia round bars, including bolts and nuts and securing to wall in PCC (1:2:4) type B1 and making good in cement mortar 1:3 complete all as specified and directed.

S&F PVC (SWR) gully trap 110 mm bore, setting and jointing with solvent cement complete all as specified and directed.

S&F 75 mm outer dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

S&F 110mm PVC (SWR) `S' trap complete all as specified and directed.

S&F 75 mm PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed.

S&F 100 mm PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed.

S&F 75 mm PVC (SWR) couplers complete all as specified and directed.

S&F 100 mm PVC (SWR) reducers complete all as specified and directed.

PVC 75 mm (SWR) vent cowl complete all as specified and directed.

PVC 100 mm (SWR) vent cowl complete all as specified and directed.

S&F Solid PVC frame (Single Rebated) of size 50x47 mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick Moulded Prelam PVC Sheet on the front face and 2 mm prelam PVC Sheet on back face fiixing in frame at site as per specification and drawing complete all as specified and directed.

S&F pressed steel frames of size 105 x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete all as specified and directed.

S&F 30 mm thick, 2nd class hardwood, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M&L for preparation of new wood or wood based surface not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F MS butt hinges 100 mm long medium weight complete all as specified and directed.

S&F aluminium, anodised barrel tower bolts 150 mm long, of extruded section and fixed complete all as specified and directed.

S&F aluminium handles cast type anodised of size 150 mm long complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry @ 3.0 Kg of cement per Sqm complete all as specified and directed.

Material and labour for vitrified ceramic (square/rectangular) light shade polished tiles of thickness 10mm, (1st quality) area of each tiles not exc 0.36 sqm and, in floors etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles over and including 15 mm thick screeding in cement mortar 1:6 complete all as specified and directed.

Material and labour for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick or concrete surfaces finishing surfaces even and smooth without using extra cement incl two coats of 3 mm thick wall care putty complete all as specified and directed.

Material and labour for preperation of newly plastered surfaces of wall and applied two coats of oil bond distemper over a coat of primer complete all as specified and directed.

Supply and fixing of roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

Supply and fixing for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Material and labour for preparation of new steel surface of any description, not otherwise described, over 10cm width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply and fixing powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.). hinges type B-21 100mm long (2 No.) suitable handle (1 No) complete all as specified and directed.

Supply and fixing powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

Supply and fixing aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed.

Supply and fixing 5 mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified and directed.

Supply and fixing 20 mm dia curtain rod mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed.

Supply and fixing aluminium anodised snap grid frame work as in false ceiling all as specified size of grid 605 x605 mm with aluminium main T section of size 36.5x 23.5 x1.60 mm and cross T of size 23.5 x 23.8 x 1.60 mm with aluminium wall angle of size 36.5 x23.5 x1.60 mm with suspender complete all as specified and directed.

Supply and fixing for non asbestos fibre cement building board,4 mm thick, fixed to aluminum frame work with screw as in ceiling in flat or sloping complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

Dismantling for plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

Dismantling of framed timber scantlings 40sqcm and over in section, in any position complete all as specified and directed.

Dismantling posts or struts(wood, steel or R.C.C.) any section embeded in brick masonary or concrete, including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Erection and fixing only mild steel roof trusses (framed) Fe-410- W(Gde- E-250) quality- B, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

Fixing only for plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Taking down chowkhats or frames with shutter area not exc. 1.5sqm each complete all as specified and directed.

Supply and fixing powder coating (Thickness of powder coating not less than 50 micron). aluminium window and ventilator shutters, of any colour fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed.

Supply and fixing powder coating (Thickness of powder coating not less than 50 micron) aluminium frame for doors,windows, ventilators of any colour with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

Taking down Chowkhats or frames with shutters (without taking off shutters from the frame) area exc 1.5 sqm but n exc 4 sqm each complete all as specified and directed.

Supply and fixing 35 mm thick IInd class hard wood ,plain, framed,panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkats complete all as specified and directed.

Supply and fixing 35 mm thick IInd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

Supply and fixing IInd class hard wood, plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and avg aparture 1.4mm and fitted with tinned tacks or galvanised wire stapple complete all as specified and directed.

S&F 5mm thick sheet glass ordinary quality and glazing with oil putty in squares not exec 0.5 sqm each pane complete all as specified and directed.

Supply and fixing 250mm long aluminium anodised sliding door bolts, staple ( bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed.

Supply and fixing aluminium anodised, barrel tower bolts of extruded section 200 mm long complete all as specified and directed.

Supply and fixing 125mm size extruded aluminium alloy handles fabricated type anodised complete all as specified and directed.

Material and labour for preparation of old steel surface of any description, not otherwise described, over 10cm width or girth, and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls build in cement mortar including racking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block of any shape and size jointed with grey cement and pigments confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.

M&L for 50 mm thick sand cusioning under paver blocks complete all as specified and directed.

M&L for preparation of old painted surfaces by washing, rubbing down and applying one coat of acrylic emulsion paint (exterior grade) of any tint/ shade complete all as specified and directed.

M&L for preparation of old painted surface and applying one coat of oil bound distemper of any tint/ shade including cleaning of glass, electrical fittings, wiring etc and complete all as specified and directed.

Material and labour for preperation of old painted wooden surfaces and applied one coat of synthetic enamel paint, complete all as specified and directed.

S&F in repairs viterous china wash down water closet (EWC) white incl 'P' or 'S' trap and plastic water closet seat cover white closed pattern with flat bottom and cover incl mild steel chromium plated hinging device complete all as specified and directed.

S&F in repairs PVC flushing cistern 10 ltr capacity incl PVC connection inlet and and outlet connections, brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC complete all as specified and directed.

S&F in repairs Vitreous China wash basin, white, flat back, size 580x450 mm excluding taps but including brackets complete all as specified and directed.

Demolition of cement oncrete (unreinforced) in ground floors and pavings exc 15 cm thickness (above ground level) complete all as specified and directed.

M&L 100mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base complete all as specified and directed.

S&F 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in reapirs angle valve 15 mm bore cast type copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe complete all as specified and directed.

S&F in repairs pillar tap 15 mm bore fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in reapirs bib tap 15 mm bore chromium plated cast type copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or brass ferrule, complete all as specified and directed.

S&F in repairs brass chromium plated shower roses 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Material and labour for Non skid cermaic coloured tiles of size 300mm x 300mm x 8mm thick on flooring etc set and jointed neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

S&F Vitreous China wash basin, white,counter top circle / oval shaped complete all as specified and directed.

M&L for LLDPE septic tank designed to carry sewage and sludge water including excavation in any type of soil, PCC 1:4:8 type D2 below foundation, Vent shaft, connection etc. for 10 users capacity complete all as specified and directed.

Construction of 1.80 m dia and 3.0m effective depth Soakage wells with excavation, in any type of soil, foundation in PCC 1:3:6 type C2, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in cement mortar 1:4 , RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats complete all as specified and directed.

M&L for brick work in cement mortar 1:4 straight or curved on plan exc 6.0m mean radius and using old size sub class 'B' bricks complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregate) in copings, bed plates, cills including form work complete all as specified and directed.

M&L for plain cement concrete 1:2:4 ype B1 (using 20 mm graded stone aggregate) as in surface channels and drains complete all as specified and directed.

M&L for rendering 15 mm thick in Cement Mortor 1:4 on fair faces of brick work or concrete Surfaces using Water Proofing Compound (WPC) as per manufacturer’s instruction, finishing the surfaces fair and even complete all as specified and directed. (Supply of WPC shall be measured & paid separately)

M&L cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in cover slab, etc complete all as specified and directed.

M&L for 150 mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed.

M&L cement concrete bed (1:3:6) type D-2 using 40mm graded stone aggregate as in bedding to pipes of 150mm dia including packing under and haunching against the side of the pipe after they are laid and tested complete all as specified and directed.

Cutting into existing manhole, sump for connection new drain making good to pipes and rendering, cutting out existing benching and forming branch channel in cement concrete 1:2:4 type B-1 for 250mm dia pipe complete all as specified and directed.

Taking down carefully aluminium / copper point wiring (light, fan, socket, powerpoint) including batten, conduit and fittings such as switches, ceiling rose, sockets, brackets, light fittings, switch board etc removing, making good distrubed surfaces of wall, floor, ceiling etc complete all as specified and directed.

M & L for point wiring with 1.5 sqmm cable PVC unsheathed and insulated copper multistranded conductor ( FRLS ) 1100 Volts grade cable ( red colour cable to be used for Phase connection and black colour cable to be used for neutral connection) including PVC conduit with all accessories including 1.5 sqmm copper multistrand conductor FRLS 1100 Volts grade unsheathed PVC insulated ( green colour ) continuity earth wire connected to common earth dolly and sunk cast pressed steel terminal box made out of MS sheet 1.25 mm thick for mounting of fittings like switch , socket and fan regulator with 3 mm thick hylum laminated sheet cover for following complete all as specified and directed.

Light/Fan/Exhaust fan/Bell point

5 amp socket on same board

5 Amp switch socket on Independent Board.

All as per item No 141 here in before but 4.0 Sqmm PVC insulated un sheathed cable with stranded copper conductor for 5 pin 6/16 Amp switch socket combination on independent board complete all as specified and directed.

S&F of 3 pin, 5 Amps socket flush type 230/240 V complete all as specified and directed .( For same Board only)

S&F of switch socket combination 2 in 1, 5/6 Amps flush type 230/240 V complete all as specified and directed. ( For Independent Board only)

S&F of switch socket combination 3 pin, 15/16 Amps flush type 230/240 V complete all as specified and directed.

S&F of ceiling rose 3 phase/PVC/polycarbonate,isolated body,surface type with ISI marked complete all as specified and directed.

S&F of switch piano flush type 5/6 amps , 240 volt single pole one way complete all as specified and directed.

S&F of Step type electronic fan regulator flush type 230 volt 5 speed control and connecting up and fix position complete all as specified and directed.

S&F in repair of wall decorative ultra slim LED 18/20 Watt, 230 volts, 50 Hz, 4 feet, lighting fixture with extruded polycarbonate lighting fixture, environmental friendly, energy efficient ready to use pack including lamp complete all as specified and directed.

S&F in repair of ultra slim LED batten 10 Watt, 230Volts, 50 Hz, decorative ultra slim LED lighting fixture with extruded polycarbonate, environmental friendly including lamp, connection wire complete all as specified and directed.

S&F in repair of bulk head luminaire environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head edge-lit LED luminaire comprising of high brightness LEDs 10 Watt, 230 Volts, 50 Hz including lamp, connection wire complete all as specified and directed.

Supply and fixing of exhaust fan, steel body AC single Phase. 230V of size 300mm sweep 1400RPM, and min air delivery 1850m3/h with, blades, and frame and louvers complete all as specified and directed

Supply and fixing ceiling fans complete with blades, down rods, and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed

Taking down ceiling fan from its position and doing complete overhauling of fan including replacement of fan clamp and split pin, rubber bush, 02 No canopy, fan capacitor of 2.5mfd painting with synthetic enamel paint over a coat of primer and refixing the same after repairs complete all as specified and directed.

S&F building security light LED type of minimum 3500 Lumens (35watts) pressure die cast aluminium housing IP 66 protection with all accessories internally prewired and including connecting up with twisted copper conductor cable of suitable size including bracket made of 32mm dia GI light grade pipe of 1.2m long bent to shape fixed with suitable MS clamps, bolts, nuts and washers duly painted including taking down old fittings complete all as specified and directed.

Supply and fixing in repair of factory made sheet metal enclosure for DBs double door, SPN, 240 volt, 4 Way, IP-42 protection with bus bar, neutral link, earth link complete all as specified and directed.

Supply and fixing in repair of factory made sheet metal enclosure for DBs double door, SPN, 240 volt, 8 Way, IP-42 protection with bus bar, neutral link, earth link complete all as specified and directed.

Supply and fixing in repair of 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP 10 to 32 Amp current carrying capacity with connection testing complete all as specified and directed.

Supply and fixing in repair of 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN 32-40 Amp current carrying capacity with connection testing complete all as specified and directed.

M&L in repair for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn through & including medium grade PVC conduit complete all as specified and directed.

M&L Earthing complete with GI plate electrode 600x600x6mm thick, buried directly and preferably vertically in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected with Galvanize earth wire 4 mm dia by means of bolts, nuts, check nuts and washers of copper all as shown in electrical plate No 3, connected to earthing with DBs all as specified including earth work and excavation in any type of soil, PCC 1:3:6 type C1 chamber & RCC 1:2:4 type B1 cover 40mm thick, with 8mm dia steel deformed (TMT bars) reinforcement at 150mm c/c both ways, 20mm dia GI medium grade pipe for watering , water funnel complete all as specified and directed.

Supply and laying 3 layer (inner antimicrobial, outer UV stabilized) ISI marked, IS-15801, PP-R pipes SDR 11 (PN-10) and PP-R plain fittings in trenches/walls/cellings or laying in floors complete of size outer dia 32 mm including all fittings complete all as specified and directed.

Supply and laying 3 layer ( inner antimicrobial, outer UV stabilized) ISI marked ,IS-15801, PP-R pipes SDR 11 (PN-10) and PP-R plain fittings in trenches/walls/cellings or laying in floors complete of size outer dia 25 mm including all fittings complete all as specified and directed.

Excavation in trenches not exceeding 1.50 mtr wide and not exceeding 1.50 mtr deep for taking out/ laying of under ground cable, pole, pipe, stay and getting out in soft soil strata including making good to the disbturbed surfaces such as hardstanding, footpath/ pavments complete all as specified and directed.

Removal of excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

Supply and fix PPR Gate Valves (Brass Insert) of 32 mm bore of outer Dia complete including all fittings complete all as specified and directed.

Supply and fix PPR Gate Valves (Brass Insert) of 25 mm bore of outer Dia complete including all fittings complete all as specified and directed.

Cutting or screwing existing steel tubing for alteration or additions of suitable size for 50 mm dia complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sqmm 2 core complete all as specified and directed.

Supply and fixing of GI Pipe of 25 mm dia light grade for cable protection pipe complete all as specified and directed.

M&L for sand cushioning to under ground cable provided with a layer of sand 8 cm depth before laying of cable and 15 cm depth after laying and stretching the cable complete all as specified and directed. Note: Punned thickness of sand shall be measured & paid.

M&L for well burnt sub class 'B' bricks of nominal size 230X115X75 mm abutting each other for mechanical protection of cable with width equal to lenght of brick including taking out old complete all as specified and directed.

Arun Moni Phukan (BID ID -3100112)