External Electrification work for 20 Gos Qtrs Itarsi Dist.Hoshangabad

Amount

Supplying and erection of HT/LT overhead line single length supporting complete with aligning and keeping it in truly vertical position including digging pit of required size filling with 1:3:6 cement concrete of 0.60 meter. dia of required length around the pole including muffing of 0.50 meter. from ground level as per specifications with 20 cm. thick base foundation providing and busying 15 mm dia G.I. pipe from bottom to 1.5 meters above ground level on pole refilling the pit including painting of pole with bitumen paint in bottom and one coat of red oxide and two coats of aluminum paint etc. complete as per specification. The depth of foundation shall be 1/6th of the length of pole. (a) H- Beam 152 x 152 mm 37.1 kg/meter weight 11meter long

Supplying and erection of steel tubular pole swaged type as per IS:2713 1980 Complete with baseplate and top Canopy (with G.I. pipe bracket as required), supports complete with digging and keeping it in truly vertical position i/c digging pit of required size filling with 1:3:6 cement concrete of 0.60 meter dia. of required length around the pole i/c muffing of 0.45meter from ground level as per specification with 20cm.thick base foundation providing and busying 15mm.dia.G.I.pipe from bottom to 1.5meter above ground level on pole, refilling the pit i/c. painting of pole with bitumen paint in bottom and one coat of red oxide and two coat of aluminum paints etc. complete as per specification. The depth of foundation shall be1/6th of the length of pole. (A) 410 SP-29 - 9 meter long.

Supplying and errection of stay set completed with stay rod, anchor plate, thimble, stay clamp, turn buckle etc. with stay wire strain insulator nut bolts as per specifications including concreting in required size and excavation in all type of soil Rocks and also foundations in cement concrete 1:3:6 complete of required size and other necessary materials complete as per specification. (A) Stay rod 20 mm with 7/3.15 mm stay wire

Supplying and fixing of Angle/ channel/flat iron, V cross Arms reinforcement of RS joist/ flat iron fittings for overhead lines and poles such as cross arms/ bracket/ clamps/ stiffness for poles etc. all required steel work including' cutting to size making proper shapes drilling scan welding etc. including nuts & bolts plan & spring wisher and other necessary material including one coat of red oxide and two coat of aluminum paint etc. as required.

Supplying and fixing Polymer type 11 K.V. pin insulator with G.I. pin of approved make on existing pole or bracket with necessary materials and hardware complete as required.

Supplying and drawing AAAC conductor of approved make with stringing, making off complete with binding at existing insulator, jointing , jump ring, billing off connecting, making 'D' loops connections etc. complete and clearing of obstacles (if any) as specified and directed. (A) AAAC Rabbit Conductor 0.05 Sq. Inch (55 sq.mm) aluminum or Equivalent .

Providing and fixing ear thing arrangement for H.T./L.T. poles with G.I. wire of 115 turn of 50mm dia. connection with bracket/ cross arm/ pole with 4mm dia. G.I. lead through 20 mm dia. G.!. Protection pipe of length from bottom of pole to 2 meter above ground level, packing of charcoal powder and salt as per specification including excavation of pit in all type of soil / rock etc. complete.

Supplying and fixing of danger/ caution Board as per specification with necessary materials complete for H.T. lines and other equipments as required.

Supplying and fixing 12x16 gauge barbed wire antidumping device (900 mm and3.5kg wire on pole) around the existing H.T. pole and sub station poles for safety measures as per IE rules including all staples and all other necessary materials complete as per mpseb specification.

Supplying, installing, connecting, testing and commissioning of 11/0.4 K.V. 3 Phase 50 Cycle Oil Immersed,Naturally Cooled,Out door Type transformer Connected Delta on H.T. Side and star on L.T. Side hand Operated Off Load Tap Changer Switch above 100 KVA Oil Conservertor with drain valve Plug 63 KVA and above Dehydrating Sillica Gel Breather on Eye Level,rating and diagram plate two Eathing terminal,Lifting lugs,Oil level Gauge drain valve with plug temperature not Exeeding 500C on load,Oil Filling Hole with plug,four Unidirectional roller Arcing Horns,Explosion vent ,terminal arrangement bushing on H.V. side and Cable Box on LV side first fillling of oil upto desired level and transformer installing on existing Structure with all required materials Arrangement as Required as Per IS Specification Marked ISI & 4 Star Rating. (A) 200 KVA 11 / 0.4 KV (BIS EE Level-II) 4 Star Rating,

Providing and fixing outdoor type pole mounting weather, dust and vermin proof L.T. distribution box made of 14/16 gauge, M.S. sheet with clamping arrangements, lockable hinged door duly painted on all sides with red oxide antirust and corrosion treatment two coats of synthetic enamel paints of approved make and shade, consisting of following fittings. L.T. Distribution box suitable for 200.KVA.transformer with required Amp MCCB on incoming side and PF HRC units on outgoing side. For 200KVA Transformer (315 Amp. 35 KA MCCB ,100 Amp HRC Fuse 9no.& Bus bar With Lamp Holder Point) Complete as required as per MP SEB latest Specification.

Supplying and installation, of totally enclosed dust, vermin and weather proof outdoor type cubical feeder pillar of required size, fabricated with 14 SWG CRCA sheet, free standing type with MS angle iron frame of size 50x50x5mm, 4 Nos. legs each of 1.2 meter long of 50x50x5mm angle iron etc., suitable sheet steel sloping hut type canopy on top of feeder pillar with 50mm projection on all sides of feeder pillar for protection against rain/weather etc. The feeder pillar shall be painted with 100 micron powder coating on all sides, door etc. after anti rust and anti corrosive treatment, vertical/ horizontal bus bar of required size and length, fixed on SMC sheet with insulators, GI hardware, neoprene gasket, inter connection with copper wires/cables of bus bar, switch gear, MCCB, MCB, Cutout or wherever required with suitable lugs of required capacity and size, providing earthing terminal bus bar of size 25x5mm with GI nut, bolts at outside of the panel with earth continuity GI strip 25x5 mm inside the panel with holes, providing engraved name plate with rating of incoming and outgoing feeder and house No., eye bolts, suitable cutouts with wire mesh jali for ventilation, detachable gland plates. The feeder pillar to have hinged type double door on front side with locking arrangement, including Godrej lock, separate chamber for incoming and outgoing MCCB/MCB etc. complete including supplying, fixing, connecting, testing and commissioning of the following materials and accessories:- (A) 1 No. - 160 Amp 25 kA A.c. at 415 Volt TP MCCB with copper neutral link, 1 set - 200 Amp. rating TPN aluminium busbar, 16 No.-32 Amp. 10 kA b.c. SPN MCB with LED lamp Indicator Complete as above(B) Double Door Protection In Feeder Pillar On MCCB And Busbar Side(C) Earthing Set as Per Circular No.1516 Dated 17.03.08. (Earthing Set 40mm,3 Mtr GI Pipe, GI Wire,Earthing Clamp with GI Plate 600mmX600mmx6mm and Nut Bolt)

Commissioning of D P structure over existing support with panting in an approved manner consisting of following :- (A) D. C. cross arm with clamp, nuts & bolts (100 x 50 mm only ) - 1 set (B) 11 KV D. O. fuse unit, lightings arrangement and AB swich mounting channel with nuts and bolts (75 x 40 mm channel) of require - 1 set (C) 11 KV Polymer AB swich as required ( set of 3 Nos.) - 1 set (D) Transformer mounting cross arms / channels with clamps nuts and bolts (100 x 50 mm channel ) - 1 set (E) 11KV Polymer Do fuse unit ( set of 3 no.) - 1 set (F) Transformer clamping set (50x50x6 mm angle ) with nuts and bolts etc. complete - 1 set (G) Transformer belting set (50x50x6 mm angle) with nuts and bolts etc. complete - 1 set (H) 11 kv polymer lightning arrestor ( 9 kv gapless type ( 5 kA ) for DTR ) ( set of 3 No.) - 1 set (I) supplying , fixing, testing and connecting of complete earling set of 7 No. as per MPMKVVC.Ltd. circular No DS CO M/EZ/ WS/1516/DT 17-03-2008 and approved dwring for transformer sub - station including all materials GI Strips, GI wires, Charcoal power salt excavation of pits in all types of soils/rocks etc. as required complete .( 1 set of 5Nos.) -1 set (J) Distribution panel mounting channel and clamp with nuts & bolts etc. (75 x 40 mm channel ) 1 – set(K) Supplying , fixing, testing and Commissioning of DTR Meter LT. 3 phase 4 wire 3X240 volts I 3 A. LTCT operated 3 phase 4 wire 3x63, 5 volts , LB = 5 amps lmax 10 amp trivector meter glass of accuracy 0.5s DLMS complaint category a meter along with GSM ( GPRS compactable ) modems with box i/c all accessories and formalities as per MPMKVVCL as required. or 3P 4w - 5A LTCT class 5s DLMS compliant type c. rs - 232. Port box MRI LTCT 100/5A i/c meter box with TTB etc as required.(L) SF & T and HT tape for covering LT bushing i/c windings and blower hitting complete minimum 30 meter or as required.(M) 20mm Nominal Size Graded Stone Aggregate Around The Sub Station D.P. Structure Complete as above (A to M)

Supplying ,laying ,testing, and commissioning of P V C insulated PVC heavy duty power cable confirming to lS 1554­1964,1100 volt grade cable Of approved make in trench ,G I pipe Air (laying on pole) trench, i/c cost of excavation in any type of soil/rock etc. including connection through lugs by cramping method glands etc as required as per specification.Supplying laying testing and commissioning.UnArmoured single core XLPE insulated aluminum conductor cable. 300 sq mm.

Supplying ,laying ,testing, and commissioning of P V C insulated PVC heavy duty power cable confirming to lS 1554­1964,1100 volt grade cable Of approved make in trench ,G I pipe Air (laying on pole) trench, i/c cost of excavation in any type of soil/rock etc. including connection through lugs by cramping method glands etc as required as per specification.Supplying laying testing and commissioning. (A)16 sq mm. armoured 4 core Cable For Street Light

Supplying ,laying ,testing, and commissioning of P V C insulated PVC heavy duty power cable confirming to lS 1554­1964,1100 volt grade cable Of approved make in trench ,G I pipe Air (laying on pole) trench, i/c cost of excavation in any type of soil/rock etc. including connection through lugs by cramping method glands etc as required as per specification.Supplying laying testing and commissioning. (B)2.5 sq mm. armoured 2 core Cable For Street Light Connection

Providing and fixing chain link fencing sourriding existing DTR S/S fencing (total 37 running meter maximum) of 6’ height with chain ling fencing on MS Angle (50X50X6) mm support 7 nos. 7’ height with following feature.(A) Upper & lower frame of fencing will be of MS angle (25X25X4) mm size. (B) MS strip of (25X5) mm flat shall be used fro cross bracing of fencing (C) Double Gate (2nos. 2.5’X5’) of MS angle (50X50X6)mm. bracing of 25X5 mm flat with mesh & locking arrangement Complete as above( A to C) – one job.

Supplying and Installing Double wall Corrugated Pipes (DWC) Of HDPE IS 14930 Part II -marked ) for cable laidunder ground with necessary material and at requireddepth upto 90cm. below road/ground surface, including excavation, back filling with excavated material, rammingand making the surface good.(a)50.00mm Outside Dia

Suppying & installing G.I. Pipe for protection ofunderground cable fixed on wall/support/in trench/fixedbetween two rigid existing support of wall/beam forerection of ceiling Fan/down rod for stiff pendent for lightluminaries /fan/protective for earthing, lightening conductordown strip/overhead service line/for submersible cable orcentrifugal pump for water supply with necessary ironclamp coupler, bend, tee, elbow, nuts and bolts etc.complete in an approved manner as required to completeexcluding cost of excavation/dismentalling & other finshed masonary Item complete For 'B' Class pipe ISI Marked (IS-1161-68) (a) 40.00mm

Jointing slives Suitable for 80 Sq mm Al AAAC Conductor

Supplying and Erection of Water Tight Terminal Box Made of 16 SWG M.S. Sheet (1.6mm Thick) i/c Rubber Gasket of Required Size Suitable for kit Kat/MCB/Switch Including 2 Nos. Pole Clamp of M.S. flat iron Size 32x3mm,nut and,bolts,4 pole epoxy connector nut & bolt type,30Amp 500 Volt.The Box Shall be Powder Coated.Including the Cost of the Kit Kat/MCB/swich Complete as per Specification.(A)20x15x10Cms

Providing and fixing including Testing of LED fixture on street light pole, the fixture should be IP- 65, PF be 0.95 with 85% Power effecency at least of life span of (approxy)working 50,000 Hrs Housing be of Al. Dye cost including connection etc cable reqd. GI pipe braket nute & bolts etc. (Make Bajaj, Crompton, Havells,Wipro, Philips, ) (A) 90 watt …………………

ANANYA ENGINEERING

YATI TRADERS

DILIP TOMAR

PRABHU ELECTRICALS

NEERAJ KUMAR JAIN