Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹74.9 L
EMD Value
₹1.5 L
Closing Date
16 Sept 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Facilities Management Division, Bangalore
HINDUSTAN AERONAUTICS LIMITED Facilities Management Division, Bangalore
Construction of 300KL Underground Sump and Pump house at SOE Including Pump and Panel Board in Hal Estate in HAL Bangalore. Including Electrical Works
9538
TENDER NOTICE/NCP/24/24-25/01
Works
Contract Section Civil-FMD-Bangalore
₹0
₹1.5 L
16 Sept 2024
29 Aug 2024
29 Aug 2024
16 Sept 2024
Name of the Individual / Firm / Company: * Mandatory
Type of ownership
Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,
Address for correspondence:
PAN No.:
Service Tax Registration No
Goods and Service Tax ID No.
Contact details
Please Enter Contact person Name
Pls Enter Mobile No
Registered Contractor
Average annual financial turn over during the last 3 years, ending 31st March 2023 of the previous financial year [ should not be less than 30% of Amount put to tender]
TURN OVER IN Rs.
Pls Enter Turn over in Rupees for all the 3 years
ESI & PF Nos with proof
Remarks if any
Bank(s) details: [Copy of the cheque leaf to be uploaded]
Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)
Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of Tender submission
Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs
Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Please enter Details for Work No 1
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No II
work done
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No III
Details of person holding the power of Attorney (If different from contact person)
Related Document to be Uploaded to eProcurement Portal
Pls Enter Details for Person holding Power of Attorney
DECLARATION I
DECLARATION II
Pls Accept the Delaration II
Specification
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas in all kinds of soft / hard soil for foundations, footings, column pedestals or members as per the drawing etc., (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including removal of vegetation and in-equalities, shoring, strutting for protecting the sides of foundation if required, removing slips or falls in excavation, forming steps in sides of deep excavations and their removal or covering up, levelling, ramming the bottom of excavation, getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m with all labour, tools & tackles, plant & machinery, hire & fuel charges etc.,all complete as directed by Engineer-incharge.
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas in all kinds of soft / hard soil for foundations, footings, column pedestals or members as per the drawing etc., (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including removal of vegetation and in-equalities, shoring, strutting for protecting the sides of foundation if required, removing slips or falls in excavation, forming steps in sides of deep excavations and their removal or covering up, levelling, ramming the bottom of excavation, getting out and disposal of excavated earth lead upto 50 m and lift from 1.5m to 3m with all labour, tools & tackles, plant & machinery, hire & fuel charges etc., all complete as directed by Engineer-incharge.
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas in all kinds of soft / hard soil for foundations, footings, column pedestals or members as per the drawing etc., (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including removal of vegetation and in-equalities, shoring, strutting for protecting the sides of foundation if required, removing slips or falls in excavation, forming steps in sides of deep excavations and their removal or covering up, levelling, ramming the bottom of excavation, getting out and disposal of excavated earth lead upto 50 m and lift from 3.0 m to 4.5m with all labour, tools & tackles, plant & machinery, hire & fuel charges etc., all complete as directed by Engineer-incharge.
Returning / filling in with useful excavated soil (excluding rock), free from salts, organic or other deleterious matter (Other than black cotton soil & rock etc., in trenches, plinth,sides of foundations etc., spreading in layers not exceeding 20 cm thick, watering, breaking / removing clods exceeding 50 mm, ramming and consolidation of each deposited layer etc., with all labour, tools & tackles, plant & machinery, etc., lead upto 50 m and for all lifts, all complete as directed by the Engineer-in-Charge.
Removing / transporting the surplus excavated earth including debris, vegetation waste etc., to a distance upto 5000m/ outside HAL premises/ to contractor's own yard including loading, unloading, depositing, spreading, levelling etc.
Construction of granular sub-base With material conforming to Grade-I (size range 75 mm to 0.075 mm) by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineerin-Charge
Supplying, mixing and placing plain cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-iii) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources) of required thickness using 40 mm down graded hard stone/granite aggregate in accordance with IS 456 in foundations, mass concrete, sub bases and other similar works including formwork, mechanical mixing, transporting, vibrating, consolidation, levelling, curing, dewatering if any, all materials, labour, lead & lift, tools, plant & machinery, keeping concrete well wetted during the curing period and protecting it in extreme weather conditions etc., but excluding the cost of centering, shuttering and finishing, all complete as directed by the Engineer-in-Charge.
Providing and laying in position ready mixed or site batched M25 Grade with minimum cement content of 330 kg/m3 design mix cement concrete for reinforced cement concrete work; using coarseaggregate and fine aggregate derived from natural sources, PortlandPozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, consolidation, levelling, curing, scaffolding, all materials, labour, carriage for all leads & lifts; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge. Note: Mix design to be obtained from Govt. / NABL laboratory for site batching concrete.
All works upto plinth level i.e upto sump roof including necessary openings and packing if any for laying pipes, cables etc.
All works above plinth level (from sump roof) upto floor V level including necessary openings and packing if any for laying pipes, cables etc.
Formwork upto 3.5 m (Centering and shuttering including strutting, propping etc, and removal of form) for the following RCC members which are defined as below, in fair finished by providing timber, wooden planks, runners / M.S. sheets with all supports, struts, braces, wedges, scaffolds, bracings, ladders, gangways, dressing with oil including M.S. bolts nuts and washers, temporary openings, filleting for a stop, chamfered edges, internal / external splayed, rounded angles or grooves for forming throating including making temporary openings in the forms for pouring concrete etc., all complete as directed by the Engineer-in-Charge for the sub-items mentioned below. Note : Formwork material is contractor's own property and shall be removed after completion of work.
Foundations, footings, bases of columns, Base slabs etc. for mass concrete
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
columns, pillars, piers, Abutments, posts and Struts
For Roofs, landings, Slabs supported on walls, roof landings, balconies, access platforms, canopies, decks etc.
lintels, beams, plinth beams, girders, bressumers and cantilevers
Supplying, straightening, fabricating (cutting & bending), placing in position and binding steel reinforcement of TMT bars of not less than Fe 500 D conforming to IS 1786 for all concrete reinforcment members / works above/below plinth level, including cutting to length, bending to shape required, including cranking, bending spirally for hooping for column, hooking ends and binding with mild steel wire (Annealed) not less than 0.9 mm dia or securing with clips, including fixing and bracing, wastage, welding, supporting or otherwise holding firmly in position so that the placing and ramming of concrete will not displace it etc., complete all as per specifications, drawings and as directed by the Engineer-in-Charge. Note : a) Only authorized laps, chairs etc. shall be considered for measurement. b) The exposed Reinforcement bars shall be coated with cement slurry.
Construction of brick work in CM (1:6) using table moulded bricks for 230mm brick wall superstructure above plinth level up to floor V level in all shapes and sizes and and along with necessary formwork, curing, finishing, making or leaving holes & chases and making good etc., all complete as directed by the Engineer-in-Charge.
Plastering with CM (1:4) of 12 mm thick over brick masonery surface finish smooth with trowell without using extra cement including curing preparation of surface etc., complete all as directed by Engineer in charge.
Water proof plastering with CM (1:4) of 20mmm thick over any surface inner / outer finish smooth with trowell with out using extra cement including curing , preparation of surface, colour pigment etc. (Water proof compound will be paid separatly) complete all as directed by Engneer-in-charge,
Providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers etc., complete all as directed by Engineer in charge (Qty is certified per bag of 50kg cement used in the mix).
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete etc., complete all as directed by Engineer-in-charge.
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : for New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre etc., complete all as directed by Engineer-in-charge.
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: for New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) etc., complete all as directed by Engineer-in-charge.
Providing and fixing factory made ISI marked steel glazed doors, windows, covers for openings and ventilators, side /top /centre hung, with beading and all members complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, priming coat of approved steel primer, but excluding the cost of glass panes complete. and Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) etc., complete all as directed by Engineer-in-charge.
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes etc., complete all as directed by Engineer-in-charge.
Supplying, fixing and commissioning of Siemens / ABB / Crompton / KBS / Grundfos / Kirloskar or any other HAL approved equivalent make UP, Horizontal Split Case Pump with Casing Cast Iron, Impellar Cast Iron, Shaft 400, Gland Packing, Coupling, Guard Base Frame, coupled to 30KW / 40 HP, 1475RPM, TEFC, IP55, Squirrel Cage Induction Motor Discharge - 170Cu m / Hour @ 40m including foundation bolts and nuts, lead and lift, Manpower for Installation, Motor shall be with Energy saving i.e. IE3/IE4 Star rating, etc., all complete as directed by Engineer-in-Charge.
Rupees Fifty Six Lakh Twenty Nine Thousand Nine Hundred Fifty One and Thirty Six Paise Only
Supply and fixing on existing wall / ceiling, testing & commissioning of surface mounting, Batten type 1X18W/20W T8 LED Tube light (four feet) Luminaries with minimum lumens output Efficacy of minimum100 lm/W., comprising of white powder coated CRCA sheet steel housing, operating on single phase 230V 50Hz AC supply, built-in electronic driver, LM 79 certification for luminaire. Other standard accessories including necessary inter-connections and supply of 1 No of 18/20W T8 LED Tube, complete in all respects and as directed by engineer-in-chage. Make & model: The LED tube & batten shall be of CROMPTON-IGP161LT8-16.1XT8+LT8-20-865/Equivalent model of approved make luminaries which meets the above technical specification. complete in all respect and as directed by Engineer-in-charge.
Supply & fixing on the building at a height of 5-8mtr approx. including supply and fixing GI pipe bracket made out of 40mm dia class B GI pipe of 1.5Mtrs long bent to shape with necessary fixing hardwares etc., to fix on building and testing & commissioning of building light LED light fixture of wattage not exceeding 35 watts and lumens output not less than 3000 lumens with necessary interconnections consisting of pressure die cast aluminum housing, optical cover made out of heat resistance toughened clear glass with IP66, luminous efficiency ≥120 lm/w at luminaries level, operating on single phase 230V 50Hz AC supply, efficient heat sink, colour temperature shall be 5700K, suitable optics for maximizing the spread complete in all respects and as directed by engineer-in-change. The luminaries shall have specific lens for optical dispersion including control gear and power factor of control gear shall be >0.95. LM 79 certification for luminaries & LM80 certificate for LED shall be produced. Any approved make fitting meeting the above technical specification has to be supplied.The LED Light fixture shall be of Bajaj :BAJAJ NEXO 42L WH PO PC SD /Equivalent model of approved make luminaries which meets the above technical specification complete in all respect and as directed by Engineer-in-charge. LED used in the fixtures shall be of approved make as per List of approved makes in tender document.
Supply & fixing on existing MS hook 1200mm sweep, Ceiling fans complete with blades, down rods, and accessories, 230V single phase 50Hz AC supply. Minimum air delivery 210cu.m/min with service value 6.00 BEE. Five star rated with brushless direct current motor(BLDC) complete, erected in position with necessary flexible copper leads of required colour and with canopy, down rod 300mm length, necessary rubber bushings, clamps nuts, bolts etc., complete in all respects and as directed by Engineer-in-charge.
Supply, installation, testing & commissioning of 300mm dia 900 rpm heavy duty exhaust fan of any approved make with louvers, connecting cord with 6A, 3 pin plug top and with all necessary accessories, including making wall openings and replastering to smooth finish with matching paint etc., complete in all respects and as directed by Engineer-in-charge.
Supply, fixing, testing & commissioning of the following factory built powder coated Double door MCB DB of any approved make fabricated out of M.S. sheet steel enclosure & necessary cutouts for operating the MCB knobs & comprising of 200 amps tinned copper busbars & earthing bus with tapped holes including internal wiring with stranded copper PVC wires or suitable size copper strips etc. & fixing the DB in flush with wall/ on wall as per site requirement with necessary M.S. angle supports, chipping the wall and replastering to smooth finish etc., wherever required as per site condition, complete in all respects, as directed by Engineer-in-charge and comprising the following as detailed below:
8 way , Double door SPN MCB DB
32A 230V DP MCB
6-32 amps. ratings, SP MCB, "C" curve, 10 KA breaking capacity.
Design, fabrication,Supply, erection, testing & commissioning of Indoor Type LT Panel -1 (PTTA)
Incoming
1No- 250A, 415V gr. 36KA TP+NL MCCB with Thermomagnetic release.
Lot - 300A TP + 150A N, 415V, short circuit rated 36KA for 1sec, Aluminium bus bars with busbar insulators, heat shrinkable PVC sleeves etc.
1Nos- Multi function meter (MFM/MDM) suitable for 3ph, 4 wire, 240V(L-N), 5A, CL-1, RS 485 Port Digital MFM/MDM of EM6400NG of Schneider or any equivalent make meeting technical specification of above MFM complete in all respect.
1 Set-250/5A current transformers of suitable class and VA burden for metering.
1No 32 A 415V gr TP 36KA MPCB of for tapping power for metering and control circuit
1Set - RYB indicating lamps of LED module with 6A, 230V,10KA, SP MCB.
1Set- 6A, 230V, 10KA SP MCB for the protection of measuring instruments.
Outgoings:
2Nos - 125A, 415V gr. 16KA breaking capacity, TP+NL MCCB Thermomagnetic release.
1No - 32A, 415V gr. 10KA breaking capacity, TP MCB
2Nos - 32A, 240V gr. 10KA breaking capacity, DP MCB
1 Nos - Panel mounted type DOL (DIRECT ON LINE) starter suitable for 3 phase , 10 HP motor rating with ON/OFF indication bi-metallic thermal overload relay of suitable size current rating, ON/OFF push buttons suitably wired and interconnected including all accessories complete in all respect.
Design, fabrication,Supply, erection, testing & commissioning of Indoor Type LT Panel -2 (PTTA)
Incoming
1No- 125A, 415V gr. 16KA 415V gr. TP+NL MCCB with Thermomagnetic release.
Lot - 150A TP + 75A N, 415V, short circuit rated 16KA for 1sec, Aluminium bus bars with busbar insulators, heat shrinkable PVC sleeves etc.
1Nos- Multi function meter (MFM/MDM) suitable for 3ph, 4 wire, 240V(L-N), 5A, CL-1, RS 485 Port Digital MFM/MDM of EM6400NG of Schneider or any equivalent make meeting technical specification of above MFM complete in all respect.
1 Set-125/5A current transformers of suitable class and VA burden for metering.
1No 32 A 415V gr TP 36KA MPCB of for tapping power for metering and control circuit
1Set - RYB indicating lamps of LED module with 6A, 230V,10KA, SP MCB.
1Set- 6A, 230V, 10KA SP MCB for the protection of measuring instruments.
Outgoings:
3No -100A, 415V gr. 16KA breaking capacity, TP+NL MCCB with Thermomagnetic release.
2Nos - 32A, 240V gr. 10KA breaking capacity, DP MCB
1No-25A, ML1.5 contactor of L&T Cat.No.SS91851 with contactor coil suitable for 230V Single phase supply.
1No- Modular digital time switch for Building light control of Legrand Alpha Rex 3 D21 or equivalent approved make with one channel daily cycle unit suitable for daily programming to switch ON & OFF and operate on 230V single phase supply.
2Nos- Panel mounted type fullyautomatic Star /Delta starter suitable for 3 phase , 40 HP motor rating with ON/OFF indication, ON/OFF push buttons suitably wired and interconnected including all accessories complete in all respect.
Design, fabrication Supply, erection, testing & commissioning of Outdoor Type weather proof IP 55 powder coated MCB DB Box fabricated out of M.S. sheet steel enclosure suitable for fixing MCB DB on wall for building lights as per site requirement with necessary M.S. angle supports, chipping the wall and replastering to smooth finish etc., wherever required as per site condition, complete in all respects, as directed by Engineer-in-charge.
Lighting Point wiring
Wiring to two light point controlled by 1 No 6A, 250V gr. flush type modular SP switch complete in all respects.
Wiring to fan point controlled by 1 No. 6A, 250V gr. flush type modular SP switch including providing 1No box type MS Fan hook in ceiling wherever required, 2 module type electronic five stepped speed regulator etc., complete in all respects.
Wiring to exhaust/wall mounting fan point using 6A, 250V gr. flush type modular SP switch housed along with other lighting switches/separate switch box if required and 3pin 6A, 250V gr. modular type socket housed near the exhaust fan complete in all respects.
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit along with 1 No. 4 sq. Mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
6A Switch
16A Switch
3 pin 6A Socket outlet
5 pin 16A Socket outlet
Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.
1 or 2 Module
3 Module
Modular GI box
Modular GI box for 1/2 module
Modular GI box for 3 module
Supply and fixing of weather proof cable junction box with terminals of size 155 mm x 210 mm x 92 mm Hensel Cat. No. DK 1616 G or equivalent in Legrand/ Schneider/ Hagar make only. The Box shall be mounted at suitable height on the pole using suitable size MS angle frame work with painting as per EIC, with cable entry knock-outs, including rigid support for all components, Din channel, required fasteners totally enclosed, dust and vermin proof and degree of protection shall not be less than IP-65 complete in all respects and as directed by Engineer-in-charge.
Supply & laying in the already excavated cable trench/cable tray/fixing on wall/duct wall with necessary M.S clamps / encasing in pipes etc., testing & commissioning of following size XLPE insulated Aluminium (Al) /Copper (cu) conductor 1.1 KV grade confirming to IS: 7098 ( part-I)/1998 with upto date amendment earthed Armoured (Arm)/un Armoured (un Arm) U.G cables and as per technical specification including stacking at site, proper storage complete etc. as required. (Note:- Excavation, sand & Brick Protection, concrete cutting, reconcreting, casing pipes will be measured separately.)
Supplying of 3.5CX 185 Sqmm LT Aluminium Armoured conductor
Supply of 3.5 CX 70 Sqmm Aluminium armoured conductor
Supply of 4CX 25 Sqmm copper armoured conductor
4 CX 6 Sqmm Aluminium armoured conductor.
Supply and connecting indoor type cable end joints for the following size 1.1 KV gr., PVC insulated and PVC sheathed / XLPE Aluminium(Al)/ Copper(Cu) conductor armoured (Arm)/un armoured(un Arm) LT UG cables by employing necessary glands, terminals(Al/Cu), bolts & nuts etc., complete in all respects and as detailed below:
Supplying of 3.5CX 185 Sqmm LT Aluminium Armoured conductor
Supply of 3.5 CX 70 Sqmm Aluminium armoured conductor
Supply of 4CX 25 Sqmm copper armoured conductor
4C x 6 Sqmm.Al Arm LT cable.
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.
Supply of2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
Supplying and fixing of Hot dip galvanised ladder type cable tray of size 300 x 50 x 2 mm, Steel: As per IS:2062 / 1079, Galvanising : As per IS: 2629 / 4759 including all accessories like base slotted angle , horizontal elbow, horizontal tee, horizontal cross, horizontal reducer, vertical elbow up, inside, vertical elbow down, outside, coupler plate, fasteners etc.
Cable tray 225 mm Width X 50 mm Depth X 1.6 mm Thickness
Earthing
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required complete in all respect as directed by EIC and as per technical specification.
Supplying & laying 25 mm X 5 mm GI strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with G.I nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of GI nut bolt & spring washer spaced at 50mm)
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.
Excavation in all types of soil for Cable trench & cable duct refilling, consolidating of soil after laying the cable including ramming and levelling to smooth finish as per the Technical specifications enclosed and as directed by the Engineer-in-charge. Note: Removing & shifting the excess digging soil/debris for making cable duct from the work site and deposit the same outside the HAL premises including loading, transportation etc., and as directed by EIC/OIC. as per the Technical specifications enclosed and as directed by the Engineer-in-charge.
Concrete cutting/Chipping/Bitumen Road the existing 1:2:4 cement concrete road /pavements / flooring / rock/stone etc., including removing debris from the work site and taking out of the division and depositing in the place as directed by EIC.
Re-concreting the cut portion/closing the dummy cable duct at same area with 1:2:4 cement concrete by employing 20mm graded aggregate granite to smooth finish including curing and form work if any complete in all respects and as directed.
HDPE Pipe
Supply and laying of 90 mm dia, PN8 HDPE pipe of confirming to IS 4984:19955 in the excavated trench/duct/at road crossings for encasing cables complete in all respect as directed by Engineer-in-charge.
Rupees Seven Lakh Eighteen Thousand Seven Hundred Nine and Sixty Two Paise Only
Rupees Sixty Three Lakh Forty Eight Thousand Six Hundred Sixty and Ninety Eight Paise Only
Approximate Amount Put to Tender
Rupees Eleven Lakh Forty Two Thousand Seven Hundred Fifty Eight and Ninety Seven Paise Only
Rupees Seventy Four Lakh Ninety One Thousand Four Hundred Nineteen and Ninety Six Paise Only
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
TN24.pdf
TENDER_DOCUMENT • 2.36 MB
42ECSForm.pdf
TENDER_DOCUMENT • 0.46 MB
42TB.pdf
TENDER_DOCUMENT • 3.30 MB
42PQ.pdf
TENDER_DOCUMENT • 0.21 MB
42PB.pdf
TENDER_DOCUMENT • 0.38 MB
CivilTenderDrawing.pdf
TENDER_DOCUMENT • 0.30 MB
Electricaltenderdrawing02.pdf
TENDER_DOCUMENT • 0.12 MB
Electricaltenderdrawing01.pdf
TENDER_DOCUMENT • 0.16 MB
42PQF.xlsm
TENDER_DOCUMENT • 0.03 MB
42PBF.xlsm
TENDER_DOCUMENT • 0.04 MB
42Undertaking.pdf
TENDER_DOCUMENT • 0.55 MB
42Checklist.pdf
TENDER_DOCUMENT • 0.17 MB
Amendment.pdf
TENDER_DOCUMENT • 0.09 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .