CERTAIN REPAIR/REPLACEMENT OF INTERNAL ELECTRIC POINT WIRINGS, SUBMAIN WIRINGS, DBs IN MD ACCN OF ZONE A AND REPAIR/MIANT AND IMPROVEMENT OF BLDG PANEL BOARDS, MCCBs, RCCBs, DBs AND MCBs AND SUB MAIN WIRING AT OTM ACCNS AT ZONE A UNDER GE (N) BTD

Amount

Taking down carefully aluminium / copper point wiring (light, fan, socket or power point ) complete including fitting such as hylem sheet switches, ceiling rose, pendent holder sockets, regulator except concealed conduit and sunken boxes etc complete all as specified and directed by Engineer-in-charge.

Material and labour for point wiring in existing concealed conduit complete with 1.5 sqmm (nominal area) PVC insulated and unsheathed multi stranded copper conductor FRLSH cable (ISI marked) for one light point /fan point controlled by one switch including 1.5 sqmm single core multi stranded FRLSH copper earth wire to common earth and connecting to earth dolly and existing MS Sunken box and including new 3 mm thick laminated sheet ISI Marked for mounting of switches and socket fan regulator, for light/fan/bell point etc., complete all as specified and directed by Engineer-in-charge.

All as per item No 2 here in before but for socket outlet 5 pin 5/6 Amp on same board, complete all as specified and directed by Engineer-in-charge.

All as per item No 2 here in before but for socket outlet 5 pin 5/6 Amp on independent board but not below the switch board, complete all as specified and directed by Engineer-in-charge.

All As per item No 2 in before but for one light point controlled by Two Two way switch, complete all as specified and directed by Engineer-in-charge.

All As per item No 2 in before but for bell/buzzer point, complete all as specified and directed by Engineer-in-charge.

All as per item No 2 here in before but for socket outlet 6 pin, 15/16 Amp multi purpose, 2 in 1 on independent board with 2.5 Sqmm cable & including 2.5 sqmm single core multi stranded FRLSH copper earth wire to common earth, complete all as specified and directed by Engineer-in-charge.

Material and labour for concealed point wiring in new PVC conduit complete with 1.5 sqmm (nominal cross section area ) FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked ) drawn through and including PVC rigid conduit 20mm dia( heavy duty ) with all fittings and all accessories i.e pipe bend pipe hook, elbow,junction box, pressed steel powder coated sunken boxe of suitable size (min 60mm deep, suitable length and 1.2mm thick ), 3mm thick bakelite plastic laminated sheet for mounting with frame and top cover for switches and socket ,fan regulator, for light/fan point controlled by one switch, top cover fixed with brass screws & cup washers including provn of 1.5 sqmm FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc including cutting chases in wall and making good distrubed surface of wall/ceiling/floors etc by using CM (1:3 ) to matching with existing surface, complete all as specified and as directed by Engineer-in-charge.

All as per item No 8 here in before but for socket outlet 5 pin 5/6 Amp on same board, complete all as specified and directed by Engineer-in-charge.

All as per item No 8 here in before but for socket outlet 5 pin 5/6 Amp on independent board but not below the switch board, complete all as specified and directed by Engineer-in-charge.

All as per item No 8 here in before but for one socket outlet 6 pin, 6/16 Amp multipurpose 2 in 1 on independent board with cable of 2.5 Sqmm, multi stranded copper conductor FRLSH cable including provision of 2.5 Sq mm PVC insulated solid copper conductor FRLSH cable continuos as earth wire connected to earth dolly, conductor etc., complete all as specified and directed by Engineer-in-charge.

Material & Labour for point wiring complete for modular type fittings with 1.5 sqmm (nominal cross section area ) FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked ) drawn through and including PVC rigid conduit 20mm dia( heavy duty ) with all fittings and all accessories i.e pipe bend pipe hook, elbow,junction box, pressed steel powder coated sunken boxe of suitable for mounting modular switches and sockets , fan regulator, for light/fan point controlled by one switch, top cover fixed with brass screws & cup washers including provn of 1.5 sqmm FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly , with and including provision of suitable module plate ,plate cover etc including cutting chases in wall and making good distrubed surface of wall/ceiling/floors etc by using CM (1:3 ) to matching with existing surface complete all as specified and as directed by Engineer-in-charge.NOTE:- The quoted unit rate is deemed to be inclusive of cost of metal flush boxes, modular white cover plates, modular frame plates and flush fixed with cement mortar 1:3 etc.However modular switches,sockets and regulators shall be measured and paid seperately under respective items of Schedule'A' BoQ.

All as per item No 12 here in before but for socket outlet 3 pin 5/6 Amp on same board, complete all as specified and directed by Engineer-in-charge.

All as per item No 12 here in before but for socket outlet 3 pin 5/6 Amp on independent board but not below the switch board, complete all as specified and directed by Engineer-in-charge.

All as per item No 12 here in before but for one socket outlet 6 pin, 6/16 Amp multipurpose 2 in 1 on independent board with cable of 2.5 Sqmm, multi stranded copper conductor FRLSH cable including provision of 2.5 Sq mm PVC insulated solid copper conductor FRLSH cable continuos as earth wire connected to earth dolly, conductor etc., complete all as specified and directed by Engineer-in-charge.

All As per item No 12 in before but for one light point controlled by Two Two way switch, complete all as specified and directed by Engineer-in-charge.

Material and labour for surface casing caping point wiring complete with 1.5 sqmm (nominal cross section area ) FRLSH PVC insulate unsheathed and multi strand copper conductor cable 1100 volt (ISI marked ) drawn through and including PVC casing caping (heavy duty ) suitable size as directed with all fittings and all accessories but including 3mm thick bakelite plastic laminated sheet (fixed with brass screws & cup washers ) for mounting of switches and socket fan regulator, for light/fan/bell point ,controlled by one switch including provn of 1.5 sqmm FRLSH PVCinsulated multi strand copper conductor wire continuoues as earth wire connected to earth dolly etc complete all as specified and as directed by Engineer-in-charge.

All as per item No 17 here in before but for socket outlet 3 pin 5/6 Amp on same board, complete all as specified and directed by Engineer-in-charge.

All as per item No 17 here in before but for socket outlet 3 pin 5/6 Amp on independent board but not below the switch board, complete all as specified and directed by Engineer-in-charge.

All as per item No 17 here in before but for one socket outlet 6 pin, 6/16 Amp multipurpose 2 in 1 on independent board with cable of 2.5 Sqmm, multi stranded copper conductor FRLSH cable including provision of 2.5 Sq mm PVC insulated solid copper conductor FRLSH cable continuos as earth wire connected to earth dolly, conductor etc., complete all as specified and directed by Engineer-in-charge.

Supply and fixing switch piano flush type, single pole, one way, 5/6 Amps ISI mark, complete all as specified and directed by Engineer-in-charge.

Supply and fixing Socket outlet, 2 in 1, 3 pin, 5/6 Amps, flush type complete all as specified and directed by Engineer-in-charge.

Supply and fixing switch piano flush type, single pole, one way, 15/16 Amps ISI marked, complete all as specified and directed by Engineer-in-charge.

Supply and fixing Socket outlet, 2 in 1, 3 pin, 15/16 Amps, flush type, complete all as specified and directed by Engineer-in-charge.

Supply and fixing switch piano flush type, single pole, two way, 5/6 Amps ISI mark, complete all as specified and directed by Engineer-in-charge.

Supply and fixing modular Switch 1 way 6A ,1 module 250 volts AC one way ISI Marked complete all as specified and directed by Engineer-in-charge.

Supply and fixing modular Socket 6 A-2/3 pin combined 2 module shuttered type 250 volts AC ISI marked model fantasy complete all as specified and directed by Engineer-in-charge.

Supply and fixing modular Switch 1 way 16 A,1 module 250 volts AC ISI marked , model fantasy complete all as specified and directed by Engineer-in-charge.

Supply and fixing modular Socket 6A/16A-2/3 pin combined,2 module 250 volts AC shuttered type ISI marked, model fantasy complete all as specified and directed by Engineer-in-charge.

Supply and fixing modular Switch 2 way 6A, 1 module 250 volts AC ISI marked, model fantasy complete all as specified and directed by Engineer-in-charge.

Supply and fixing Bell push, piano flush type, 5 amp 250 Volts, complete all as specified and directed by Engineer-in-charge.

Supply and fixing modular Bell push, 6 amp 250 Volts, complete all as specified and directed by Engineer-in-charge.

Supply and fixing stepped type electronic fan regulator flush type on existing sheet, complete all as specified and directed by Engineer-in-charge.

Supply and fixing modular type electronic fan regulator flush type complete all as specified and directed by Engineer-in-charge.

Supply and fixing ceiling rose 3 phase flush type 6 Amp 250V AC topline series with polycarbonate 20mm X 50 mm two to three terminal, complete all as specified and directed by Engineer-in-charge.

Supply and fixing Lamp holder of PVC/Polycarbonate type with back plate suitable for batten fitting all as specified and directed by Engineer-in-charge.

Supply and fixing Electronic Bell, ding dong type 230 Volt AC supply, complete all as specified and directed by Engineer-in-charge.

Supply and fixing in replacement wall mounted Retro LED 20 watt, Batten decorative type, appx 4 feet long, pre wired including LED tube light 20W, 6000K with inbuilt driver complete fitting and all other accessories fitting arrangements including electric connection connecting with using flexible copper wire twin core upto ceiling rose/connector complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in replacement wall mounted Batten fitting square profile 20 watt white flux appx 4 feet long, pre wired complete fitting and all other accessories fitting arrangements including electric connection connecting with using flexible copper wire twin core upto ceiling rose/connector complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in replacement LED mirror light fiting 7/ 9 watt, 6000K, lineer & compact with decorative grey end caps, polycarbonate body and ribbrd opal diffuser complete fitting with lamp and all other accessories fitting arrangements including electric connection connecting with using flexible copper wire twin core upto ceiling rose/connector, complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in replacement wall mounted/surface mounted decorative wall light fixture in cylindrical profile made up of decorative glass including LED 9 Watt lamp, base B22, complete fitting and all other fixing accessories including electric connection connecting with using flexible copper wire twin core complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in replacement recessed LED ceiling cool light type for maximized glare free output suitable for 600x600mm and ceiling cutout 595mm x 595mm modular grid/POP ceiling complete fitting with separate electronic driver and high brightness SMD LEDs 36 watt, 6000K and one nos extra LED driver along the fittings including connecting electric connection, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement recessed LED ceiling warm white light window for maximized glare free output suitable for 600mm x 600mm and ceiling cutout 595mm x 595mm modular grid/POP ceiling complete fitting with separate electronic driver and high brightness SMD LEDs 36 watt, 6000K and one nos extra LED driver along the fittings including connecting electric connection, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Building security light IP 66 luminaire with high power LED of 25 watt with toughened glass complete all as per manufacturer's instructions and fixed with Existing GI Bracket suitable for security light fitting fixing to wall / column & electrical connection to the light fitting with and including providing 1.5 mtr long twin core round copper conductor cable of suitable size and testing complete all as specified and directed.

Supply and fixing bed side lamp bidirectional type pre-wired with Led of suitable capacity 7/9watt complete as per sample.

Supply and fixing in replacement of square/round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light warm white complete with drivers, holders,with and including LED lamp suitable for roof ceiling as per manufacturer's instructions including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-charge..

Supply and fixing in replacement LED Post top lantern 20 watt, IP65, with cast aluminium spigot housing, with decorative clear opal acrylic diffuser, complete fitting with all accessories and with and including LED lamp complete as per manufacturer's instructions and fixing on existing GI pipe system including all electric connections complete all as specified and as directed by Engineer-in-charge.

Material and labour in replacement Sub main wiring complete with two single core 4 sqmm,1100 volts grade, PVC insulated, multi stranded copper conductor cable FRLSH with and including single core 4 sqmm,1100 volts grade, PVC insulated, multi stranded copper conductor cable FRLSH for earth wire in existing PVC concealed conduit (Colour code phase-Red, Neutral-black and Earth as Green) complete all as specified and directed by Engineer-in-charge. Notes:- (a) Three single core 4 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade shall be measured as one length.

Material and Labour in replacement for Sub main wiring with two single core of size 4 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade including cuttting, chasing and grouting including non metallic rigid PVC conduit medium quality of size 20 mm dia conforming to 3537 Part-I ISI marked including all fitting such as Tee, Elbow, bend etc drawn in and including one single core of size 4 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade as in contineous earth conductor cable connected to earth dolly complete all as specified and as directed by Engineer-in- charge. (Colour code phase-Red, Neutral-black and Earth as Green) complete all as specified and as directed by Engineer-in- charge. .Notes:-(a) Cost of PVC conduit , conduit accessories and earth wire included in sub main wiring. (b) Three single core 4 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade including non metallic rigid PVC conduit of size 20 mm dia shall be measured as one length.

Material and labour in replacement Sub main wiring complete with two single core 6 sqmm,1100 volts grade, PVC insulated, multi stranded copper conductor cable FRLSH with and including single core 6 sqmm,1100 volts grade, PVC insulated, multi stranded copper conductor cable FRLSH for earth wire in existing PVC concealed conduit (Colour code phase-Red, Neutral-black and Earth as Green) complete all as specified and directed by Engineer-in-charge. Notes:- (a) Three single core 6 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade shall be measured as one length.

Material and Labour in replacement for Sub main wiring with two single core of size 6 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade including cuttting, chasing and grouting including non metallic rigid PVC conduit medium quality of size 20 mm dia conforming to 3537 Part-I ISI marked including all fitting such as Tee, Elbow, bend etc drawn in and including one single core of size 6 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade as in contineous earth conductor cable connected to earth dolly complete all as specified and as directed by Engineer-in- charge. (Colour code phase-Red, Neutral-black and Earth as Green) complete all as specified and as directed by Engineer-in- charge. .Notes:-(a) Cost of PVC conduit , conduit accessories and earth wire included in sub main wiring. (b) Three single core 6 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade including non metallic rigid PVC conduit of size 20 mm dia shall be measured as one length.

Material and labour in replacement Sub main wiring complete with two single core 10 sqmm,1100 volts grade, PVC insulated, multi stranded copper conductor cable FRLSH with and including single core 10 sqmm,1100 volts grade, PVC insulated, multi stranded copper conductor cable FRLSH for earth wire in existing PVC concealed conduit (Colour code phase-Red, Neutral-black and Earth as Green) complete all as specified and directed by Engineer-in-charge. Notes:- (a) Three single core 10 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade shall be measured as one length.

Material and Labour in replacement for Sub main wiring with two single core of size 10 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade including cuttting, chasing and grouting including non metallic rigid PVC conduit medium quality of size 20 mm dia conforming to 3537 Part-I ISI marked including all fitting such as Tee, Elbow, bend etc drawn in and including one single core of size 10 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade as in contineous earth conductor cable connected to earth dolly complete all as specified and as directed by Engineer-in- charge. (Colour code phase-Red, Neutral-black and Earth as Green) complete all as specified and as directed by Engineer-in- charge. .Notes:-(a) Cost of PVC conduit , conduit accessories and earth wire included in sub main wiring. (b) Three single core 10 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade including non metallic rigid PVC conduit of size 20 mm dia shall be measured as one length.

Material and labour for PVC conduit 25mm dia (non metallic, heavy duty), fixing on wall surface including all fitting arrangement i.e. PVC clamp, rawl plug, pipe hook, screw, terminal box, junction box, tee, bend, PVC round plate, bell mouth tube ends, couplers etc. including making good disturbed surfaces of walls as per existing after that existing LAN wires and telephone wires any size disconnecting the existing connection and drawing through conduit and re-connection with existing instruments as per original, complete all as specified and as directed by Engineer-in-charge.

Material and labour for PVC casing caping of size 32mm (medium grade), fixing on wall/ceiling surface including all fitting arrangement i.e. PVC clamp, rawl plug, screw etc. including making good disturbed surfaces of walls as per existing after that existing LAN wires and telephone wires any size disconnecting the existing connection and drawing through casing caping and re-connection with existing instruments as per original, complete all as specified and as directed by Engineer-in-charge.

Supply and fixed in replacement of Electronic driver suitable for Led ceiling lite of 36 watt of size 2' x 2', complete all as specified and as directed by Engineer-in-charge.

Supply and fixing in replacement factory made DB (made out of CRCA sheet not less than 1.2mm thick ) TPN, 4 Way 433 V (8+12 modules), double door, earth bar, copper bus bar 200 Amp and neutral link, protection class IP-43 suitable for mounting MCB/Isolator, conforming to IS-8623, BS-5484, Powder coated, dust and vermin proof,including making good disturbed surfaces of walls as necessaty complete all as specified and directed by Engineer-in-charge. Note: MCB & MCCB shall be measured and paid seperately in respective items of Schedule'A' BoQ.

Supply and fixing in replacement sheet metal enclousers made out of CRCA mild steel sheet not less than 1.2mm thick , IP-43 protection, flush mounted with metal door, powder coated DB SPN 12 way 230 V AC with 200 Amp rated copper bus bar, Double Door,12 modules, powder coated, dust and vermin proof suitable for incorporation of MCB's and isolators etc complete all as specified and directed by Engineer-in-charge. Note: MCB & MCCB shall be measured and paid seperately in respective items of Schedule'A' BoQ.

Supply and fixing in replacement factory made DB (made out of CRCA sheet not less than 1.2mm thick) SPN, 8 Way 240V, double door, earth bar, copper bus bar 200 Amp and neutral link, protection class IP-43 suitable for mounting MCB/Isolator, conforming to IS-8623, BS-5484 dust and vermin proof, including making good disturbed surfaces of walls as necessaty, complete all as specified and directed by Engineer-in-charge.Note: MCB & MCCB shall be measured and paid seperately in respective items of Schedule'A' BoQ.

Supply and fixing replacement of Sheet metal enclousers made out of CRCA mild steel sheet not less than 1.2mm thick, double door, powder coated DB VTPN 4 way 415 Volt,(concealed in wall or as directed) dust and vermin proof suitable for incorporation of MCCB's upto 125Amp and isolators etc including making good disturbed surfaces of walls as necessaty complete all as specified and directed by Engineer-in-charge.Note: MCB & MCCB shall be measured and paid seperately in respective items of Schedule'A' BoQ.

Supply and fixing in replacement of Sheet metal enclousers made out of CRCA mild steel sheet not less than 1.2mm thick, double door, powder coated DB VTPN 8 way 415 Volt,(concealed in wall or as directed) dust and vermin proof suitable for incorporation of MCCB's upto 125Amp and isolators etc., complete all as specified and directed by Engineer-in-charge. Note: MCB & MCCB shall be measured and paid seperately in respective items of Schedule'A' BoQ.

Supply and fixing in replacement single pole and neutral enclosure with a two pin and earth plug and socket complete with and including one single pole MCB of capacity 25 Amps, 240 volts for ACs/ Gyeser supply complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amps, 240 volts, AC/Gyeser supply , complete all as specified and directed by Engineer-in-charge.

Supply and fixing in replacement MCB 6 to 40Amps, 240 volts AC supply SP rupturing capacity not less than 10KA,' B' Curve , including complete all as specified and directed by Engineer-in-charge.

Supply and fixing in replacement MCB 10 Amps, SPN 10 KA 'B' curve 230 V AC, 50 Hz including necessary attachment complete all as specified and directed by Engineer-in-charge.

Supply and fixing in replacement MCB 40-63 Amps, SPN 10 KA 'B' curve 230 V AC, 50 Hz including necessary attachment complete all as specified and directed by Engineer-in-charge.

Supply and fixing in replacement MCB 32 Amps, SPN 'B' curve 230 V AC, 50 Hz , 10 KA including necessary attachment complete all as specified and directed by Engineer-in-charge.

Supply and fixing in replacement MCB TPN 40 to 100 Amps 415 Volt AC, 'B' curve, rupturing capacity not less than 10 KA complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement of MCCB of capacity 125 Amp, 4 Pole, 415 volt, short circuit breaking capacity not less than 16KA , thermal magnetic trip, setting 80-100%, Icu-100% Ics confirming to IEC-947, IS-13947, including thimbles, nuts, bolts, washers etc .complete all as specified and directed by Engineer-in-charge.

Supply and fixing MCCB 160 Amp , 4 Pole , 415V rshort circuit breaking capacity not less than 25KA , thermal magnetic trip, setting 80-100%, Icu-100% Ics confirming to IEC-947, IS-13947, including thimbles, nuts, bolts, washers etc .complete all as specified and directed by Engineer-in-charge.

Supply only MCCB 4 Pole ,160 A, 415V . Rupturing capacity not less than 36KA,thermal magnetic trip, setting 80-100%, Icu-100% Ics confirming to IEC-947, IS-13947, including thimbles, nuts, bolts, washers etc .complete all as specified and directed by Engineer-in-charge.

Supply and fixing RCCB of capacity 63 Amps 100mA four pole for earth leakage , overload & short circuit protection all as specified and directed by Engineer-in-charge.

Supply and fixing RCCB of capacity 40 Amps 100mA two pole for earth leakage , overload & short circuit protection all as specified and as directed by Engineer-in-charge.

Supply and fixing in replacement of LED strip of 22 watt wide viewing angle for good light distribution, easy to install including led strip driver, complete all as specified and directed by Engineer-in-charge.

Takind down Panel from existing brackets and Dismantling of existing Serviceable / Unserviceable MCBs, MCCBs,& RCCBs , Bus bar , Energy meters, Indicators and other connected items , unservicable wiring acessories from existing panel board and repairing of hinges including locking arrangements and cleaning and spray painting of wall mounted indoor type LT panel board , with and including necessary new internal wiring of panel and suitable opening for cable entry with gland and refixing servicable MCBs, MCCBs,& RCCBs , Bus bar , Energy meters, Indicators and other connected items and hanging over on existing brackets comprising all as specified and directed by Engr-in- charge. Note :- (i) After the spray painting and cleaning , refixing the servicable MCBs, MCCBs,& RCCBs , Bus bar , Energy meters, Indicators and other connected items in its original position and the rate of labour for these elements is included in this item and nothing shall be paid extra on this account . (ii) Material and Labour for New internal wiring of panel and suitable opening for cable entry with gland is included in this item and nothing shall be paid extra on this account. (iii) if required replace with new MCBs ,MCCBs & RCCBs in lieu of old unservicable shall be measured and paid separately under respective items of schedule 'A' BoQ as material and labour.

Note:- Net contract sum shall be calculated after deduction of Sch of credit.

M/s VISHAL ELECTRIC STORE

M/S KARTIK BUILDERS

M/s NIRMAN BUILDERS