Renewal work of Bilrayan Panwari Road (SH-21) in Km-401 to 416, 421 to 427 and 432 to 440

Providing and applying tack coat with bitumen VG-10 using bitumen pressure distributor at the rate of 0.20 kg per sum on the prepared bituminous surface cleaned with mechanical broom. As per MORT&H Clause 503

Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 Percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specificationclause No. 507 complete in all respects

Construction of sub grade and earthen shoulders with approved materials obtained from boorrow pits with all lifts & leads, transporting to site, spreading, grading to required slop and compacted to meet requirement of table No. 300-2 Patri

Providing and laying of hot thermoplastic compound 2.5 mm thick including reflect rising glass beads @ 250 gms per sqm area thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC-35 the finished surface to be level uniform and free sleek and holes, Zebra Line

Providing and laying of hot thermoplastic compound 5mm thick including reflect rising glass beads @ 250gms per sqm area thickness of 5mm is exclusive of surface applied glass beads as per IRC-35 the finished surface to be level uniform and free sleek and holes. (Repeated bars in Abadi Portion)

Providing & fixing Km. stone, Hectometre Stone, Painting & Letter's Writing 5th kilometre stone

Providing & fixing Km. stone, Hectometre Stone, Painting & Letter's Writing Ordinary kilometer stone

Providing & fixing Km. stone, Hectometre Stone, Painting & Letter's Writing Hectometer stone