Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹9.7 LAccepted-AOC S O TSERING ANGCHOK R O THANG PA NULL NURLA LEH LADAKH U T PIN 194106 | LEH | LEH | LADAKH | 194106 | L-1 | Accepted-AOC Lowest bidder | |
| 2 | L-2₹12.3 L+₹1.5 L (13.8%)Rejected-AOC | L-2 | Rejected-AOC other than lowes | |
| 3 | L-3₹12.4 L+₹1.6 L (14.8%)Rejected-AOC H O 20 D INDUSTRIAL ESTATE LEH LADAKH 194 101 J K | LEH | LEH | LADAKH | 194101 | L-3 | Rejected-AOC Other than lowest |
Tender Value
₹9.8 L
EMD Value
₹20,000
Closing Date
24 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) NIMU
AGE (I) NIMU PIN 901312 c/o 56 APO
ADDITION AND ALTERATION OF BLDG NO T 53, 6800 2013 14 AND PROVN OF WASHING POINT AND SOAKAGEWELL AT NURLA MIL STN UNDER AGE(I) NIMU
2023_MES_585214_3
AGE(I)/NIT-35/2022-23
Open Tender
Civil Works
Item Rate
180 days
Nimu
As per NIT condition
9 documents required · 9 mandatory
₹500
AGE (I) NIMU
₹20,000
Yes
20 Oct 2023
26 Jul 2023
26 Aug 2023
26 Jul 2023
24 Aug 2023
9 Aug 2023
26 Jul 2023 - 9 Aug 2023
Amount
B&R Items
Excavating over areas, n exc 1.5 m deep and getting out in hard / dence soil, complete all as specified & directed.
Extra over item No 1 for Each addittional 1.5 m depth or part thereof in depth beyound the first 1.5 m depth in hard / dence soil, complete all as specified & directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, laying of pipes etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard / dence soil, complete all as specified & directed.
Plain cement concrete 1:4:8, type D-2 (using 40mm aggregate) as in foundations, filling and mass concrete, complete all as specified and directed by Engr-in-Charge.
Precast cememt concrete block masonary with solid blocks type-C-1 1:3:6 (using 20mm graded crushed stone aggregate) exc. 10cm in width and setting in cement mortar (1:6), complete all as specified and directed by Engr-in-Charge.
Rendering 15 mm thick plaster on fair face of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra ement. complete all as specified and directed by Engr-in-Charge.
Preparation of new plastered or concrete surfaces of walls and applying two coats of cement base paint including curing over a coat of chalk white, complete all as specified & directed.
2nd class softwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and directed by Engr-in-charge.
2nd class softwood 35mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats for doors, complete all as specified and directed by Engr-in-charge.
2nd class softwood 30mm thick glazed and skeleton shutters open rebated and prepare to receive glass, gauge etc divided in squares with plain chamfered or rounded, mitered and rebated with sash bars and provided in windows, ventilators and stiles and rails size of members of shutter as specified in SSR Pt-I Sec 8 clause 8.24(a) supplied and fitted to chowkats, complete all as specified and directed by Engr-in-charge.
Aluminium alloy, anodised, sliding door bolt 300mm size with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast alumimnium alloy and fixed, complete all as specified and directed by Engr-in-charge.
Aluminium anodised, barrel tower bolt of extruded section and fixed, 150mm long (ISI marked), complete all as specified and directed by Engr-in-charge.
Mild steel 100mm long Butt hinges, medium weight, cold rolled mild steel, and fixed, complete all as specified and directed by Engr-in-charge.
Extruded aluminium alloy handle, fabricated type D, anodised 150mm long, complete all as specified and directed by Engr-in-charge.
Mild steel 75 mm long Butt hinges, medium weight, cold rolled mild steel, and fixed, complete all as specified and directed by Engr-in-charge.
Extruded aluminium alloy handle, fabricated type, anodised 100mm long, complete all as specified and directed by Engr-in-charge.
Aluminium anodised, barrel tower bolt of extruded section and fixed, 100mm long (ISI marked), complete all as specified and directed by Engr-in-charge.
Applying two coats of synthetic enamel painting to new surfaces wooden based over a coat of pink primer exc. 10 cm width/girth including preparation of surfaces including filling with filler where required all as specified and directed by Engr-in-charge.
Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire stapples all as specified and directed by Engr-in-charge.
3mm thick sheet glass, ordinary quality and glazing with wooden beading in squares n exc 0.5 sq. m in each pane, complete all as specified and directed by Engr-in-charge.
75mm thick Cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub-base in floor finishes, complete all as specified and directed by Engr-in-charge.
25mm thick cement concrete typeB-0, 1:2:4 (using 12.5mm graded aggregate) as in sub base in floor finishes, complete all as specified and directed by Engr-in-charge
Joint free non - skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed in cement mortar 1:4, complete all as specified & directed.
Glazed coloured ceramic tiles in vertical surface 300x200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles over and including 10mm thick cement plaster in cement mortar 1:4, complete all as specified and directed.
Chequered cement concrete tiles 30cm x 30cm x 20mm thick, set, jointed and pointed in neat cement slurry in floors over and including screed bed in cement mortar 1:4, complete all as specified and directed by Engr-in-charge
Rolled mild steel work in roof trusses (framed) trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., conforming to Fe-410W grade-E-250, complete all as specified & directed.
0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with 'L' type or 'J' type or cranked hook bolts in lieu of screws and washers, in roofs, walls etc. with grade of zinc coating 275. complete and all as specified and directed byEngr-in-charge.
Preparation of old decorated steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint of any description, complete all as specified & directed.
TMT bars 10 mm dia and over, cut to length , bent to shape required including cranking , bending spirally for hooping for columns, hooking ends, binding with and including mild steel wire ( annealed ) not less than 0.9mm dia , complete all as specified and directed by Engr-in-Charge.
Precast reinforced cement concrete, type B-1, 1:2:4 (using 20mm graded crushed stone aggreagate) as in manhole cover set in cement mortor 1:4 , complete all as specified and directed by Engr-in-Charge.
PVC (SWR) 110 mm bore pipe single socketed, in any length with rubber ring joints, laid in trenches or in floor, complete all as specified and directed by Engr-in-Charge.
PVC (SWR) junction single, (Single T) equal or unequal with access door, complete all as specified and directed by Engr-in-charge
PVC (SWR) bends any radius of 110mm bore, complete all as specified and directed by Engr-in-Charge.
Reinforced cement concrete 1:2:4 type B-1 ( using 20 mm graded crushed stone aggregate ) as in slabs supported on walls, beams and columns in floors, roofs, complete all as specified and directed by Engr-in-Charge.
Formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc for flat rough finished surface of concrete, complete all as specified and directed by Engr-in-charge
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard/dence soil, complete all as specified and directed by Engr-in-charge
Hardcore of broken stone and boulder gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified and directed by Engr-in-charge
75mm thickness PCC 1:3:6 type C-2 as in plinth protection and paving, all as specified and directed by Engr-in-charge.
Returning, filling in excavated soil, including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified and directed by Engr-in-Charge.
Removing excavated soil to a distance n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and directed by Engr-in-Charge.
Plain fillets. exc. 13 and n.exc 25 Sq cm as in square, rectangular or triangular in section, clean sawn, secured with nails or brads.all as specified and directed by Engr-in-charge.
Plain fillets exc 3 and n.exc 6 Sq cm in bullnosed, splayed, chamfered or rounded on one or both edges or face as in beading all as specified and directed by Engr-in-charge.
9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work as in walls all as specified and directed by Engr-in-charge.
PVC (SWR) gully trap, plain with grating incl jointing with solvent cement of 100mm bore, complete all as specified and directed by Engr-in crage.
100mm thick concrete bed to drain pipe in PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) including packing under and haunching against the sides of pipe after laid and tested for 150 mm bore, complete all as specified and directed by Engr-in-Charge, complete all as specified and directed by Engr-in crage.
PVC (SWR) vent cowl of 110 mm bore, complete all as specified and directed by Engr-in crage.
Stone masonry walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, bulit in cement mortar 1:4, complete all as specified and directed by Engr-in-Charge.
Stone masonry walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, laid dry as directed , complete all as specified and directed by Engr-in-Charge.
Use & waste form work to soffits of suspended slabs, such as roof slabs, landings and similar work not exceeding 200 mm thick with rough finished flat surfaces of concrete, complete all as specified and directed by Engr-in-Charge.
Rendering 10 mm thick plaster on fair faces of brickwork or concrete surfaces in cement mortar (1:4) with using water proofing compound and finished even and smooth without using extra cement, complete all as specified and directed by Engr-in-Charge. (Note : Water proofing compound will be measured and paid separately)
Cement Concrete, 1:2:4, type B1 using 20mm graded agg as in lintel upto 1.50 m span, cills, steps, seismic and other silmilar bands, plinth courses, sring courses,lacing courses, parapets and railings upt 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in item 04028, water troghs and the like including weathering, slightly rounded or camphered angles and throating, complete all as specified and directed by Engr-in-Charge.
Machine cut Kota stone flooring 20mm to 25mm thick over and incl 15mm thick cement screed bed in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match thedhade of the slab incl rubbing and polishing complete.
Machine cut Granite slab flooring 20mm thick over and incl 15mm thick cement screed bed in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match thedhade of the slab incl rubbing and polishing complete.
Glazed coloured ceramic tiles 350X250X7mm/ 450X350X7mm thick as in vertical surface such as skirting, dado, etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles incl 10mm thick plastering in CM 1:3 complete all as specified and directed by Engr-in charge.
1000 litre capacity Rotational moulded polythene water storage tanks (cylindrical vertical with closed top, two layers) hoisted and fixed in position complete all as specified.
20mm bore nipple (minimum weight 45 gram) suitable for water tank complete and all as specified and directed byEngr-in-charge.
20mm bore 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc.all as specified and directed by Engr-in-charge.
25mm bore 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc.all as specified and directed by Engr-in-charge.
20mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed all as specified and directed by Engr-in-charge.
15mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed fancy type, all as specified and directed by Engr-in-charge.
Stop valves, 20mm bore, chromium plated, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, both ends screwed for iron pipe or for union etc., fixed in repairs, complete all as specifed & directed.
Decorative laminate type 1 and 0.9 mm thickness of surface finish colour and pattern as approved fixed with approved,fixed with approved adhesive as per manufacturers's instruction, complete all as specifed & directed.
18/19 mm particle board,medium density ,flat pressed, single layer type or three layer type with BWR , fixed with nails to timber frame work in wall panelling, complete all as specifed & directed.
Mild steel 100mm Double action hinges, mild steel wire spring stove enamelded, and fixed, complete all as specifed & directed.
Extruded aluminium alloy handles, fabricated type, anodised 75mm long, complete all as specifed & directed.
Supply only water proofing compound ISI marked, complete all as specified and directed
E&M Items
Point wiring with PVC insulated single core cable (FRLS) of stranded copper conductors of size 1.5 sqmm, 1100 volt grade drawn in and including rigid PVC casing caping accessories laid on wall/ceiling surface and fixed with PVC saddles and back-plate and GI screws, including PVC insulated single core cable (FRLS) of stranded copper conductor of size 1.5 sqmm as earth continuous wire connected to common earth and PVC Board of suitable for housing like switches, sockets, fan regulators etc for One light point/one fan point controlled by one switch, complete all as specified and as directed by Engineer-in-Charge.
Point wiring with PVC insulated single core cable (FRLS) of stranded copper conductors of size 1.5 sqmm, 1100 volt grade drawn in and including rigid PVC casing caping accessories laid on wall/ceiling surface and fixed with PVC saddles and back-plate and GI screws, including PVC insulated single core cable (FRLS) of stranded copper conductor of size 1.5 sqmm as earth continuous wire connected to common earth and PVC Board of suitable size for housing like switches, sockets, fan regulators etc for One 3 pin 5 amps socket outlet on independent board, complete all as specified and as directed by Engineer-in-Charge.
Point wiring with PVC insulated single core cable (FRLS) of stranded copper conductors of size 1.5 sqmm, 1100 volt grade drawn in and including rigid PVC casing caping accessories laid on wall/ceiling surface and fixed with PVC saddles and back-plate and GI screws, including PVC insulated single core cable (FRLS) of stranded copper conductor of size 1.5 sqmm as earth continuous wire connected to common earth and PVC Board of suitable size for housing like switches, sockets, etc for One 3 pin 5 amps socket outlet on same board, complete all as specified and as directed by Engineer-in-Charge.
All as per item No 47 above but with conductor of size 4 sqmm (Nominal area) (FRLS) for one 3 pin socket outlet 15 Amps on independent board complete and earth continuity wire with 4 sqmm (FRLS) PVC insulated stranded copper conductor Cable, complete all as specified and as directed by Engineer-in-Charge.
Socket 2 in 1, 5 pin 5 Amp flush type, complete all as specified and directed.
Switch piano flush type 5 Amp, single pole, one way, complete all as specified and directed.
Switch socket combination 2 in 1, 3 pin, 5 Amp flush type, complete all as specified and directed.
Switch Socket Combination 2 in 1, 3 pin, 15/16 amp flush type Universal, complete all as specified and directed.
Ceiling rose surface Bakelite 65x50mm two to three terminal, complete all as specified and directed.
Basic all purpose surface and wall mounted LED batten with polycarbonate housing and integreted electronic driver of cap 20 watt, 4 feet long, with all accessories, complete all as specified and directed.
Sheet metal powder coated versatile single door SPN distribution board, 8 way suitable for MCB's fitted with copper bus bar rated 200amps, neutral link , earth bar and din rail suitable for use on 240 Volt, 50Hz, complete all as specified and directed.
MCB SPN 40 Amp, 240V with 10KA breaking capacity of 'C' series in distribution boards, complete all as specified and directed.
MCB SP 6-32 Amp with 10KA breaking capacity of 'C' series in distribution boards, complete all as specified and directed.
LED light fitting 20 watt, 220 v, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed.
M/S LOBZANG NORBOO
MS INFRATECH
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .