Constr of allied service for instl of the containerised simulator,Provn of room for storage of WP Amn with water storage facility, Provn of 03xtoilet and 2xbathrooms in 25 Mech Inf,Provn of area drainage line of 161(I)Fd Wksp under GE(E)Fzr Cantt

Amount

M&L for excavation in trenchs, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sqm on plan and n exc 1.5m in depth and getting out soft /loose soil.

M&L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as directed

M&L TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking bending spirally for hoping for columns hooking for columns hooking ends and binding with and including mild steel wire (Annealed) not less than 0.9 mm dia or securing with etc complete all as directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) complete all as specified

M&L Nominal Mix type B1 1:2:4 (20 mm graded agg.) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves

Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.

Removal of surplus soil to a distance not exc 50 metre and depositing where directed at a level not exc 1.5 metre above the starting point complete all as specified and directed.

M&L cement concrete 1:2:4 Type B-1 using 20 mm graded stone aggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

M&L Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified and directed.

M&L rendering/plastering, 15mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, surfaces finished even and smooth without using extra cement complete all as specified and directed. (WPC measured separately).

M&L Rendering/plastering, 15mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering/plastering, 5mm thick in cement mortar (1:3) on concrete surfaces, finished even and smooth without using extra cement as in ceiling complete all as specified and directed.

M & L for damp roof course 40 mm cement concrete 1:2:4 (type B-1) using 20 mm graded stone aggregate to horizontal or vertical surfaces incl necessary form work complete all as directed. Note: Unit quoted rate shall be deemed to be included with 3% WPC by Wt of cement (Make of WPC: CICO/SIKA)

S&F steel windows or ventilators, fixed type with glazing bars including projecting type hinges with steel handle and steel peg stay complete with glazing bars etc complete all as directed.

S&F 3 mm plain sheet glass ordinary quality & glazing with oil putty in square n.exc 0.5 Sqm in each pane complete all as directed.

M&L applying three coats of white wash including preparation to ceiling etc compete all as directed.

Preparation of new plastered surfaces and applying two coats of cement base paint over a coat of chalk white primer complete all as specified and directed.

M&L for Preparation of newly plastered surfaces of walls & applying three coats coats of white wash complete all as specified and directed.

M&L for new steel surfaces of any description , over 10cm in width or girth, not otherwise described and applying two coat of synthetic paint complete all as specified and directed.

M&L Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in plinth protection, 50mm thick, surfaces finished even and fair without using extra cement as in plinth protection including provision of construction joints complete all as specified and directed

M&L hard core of broken bricks of gauge n.exc 63 mm deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface etc complete all as specified and directed

M&L Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed

M&L for cement concrete type D-2 , 1:4:8 , 75mm thick as in sub floor, sub bases of floor etc complete all as specified and directed

M&L for cement concrete type B-1 , 1:2:4 , 40mm thick as in floor finished omplete all as specified and directed

Cement concrete (1:2:4), type B-1 using 20mm graded stone aggregate as in bed block of hold fast, coping complete all as specified and directed.

S & F Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates,rivetting, etc., n exc 10 kg each brackets, conforming to FE 410-0 or FE 310-0 (Brackets over 10kg each to be measured under `Structural Steel') complete all as specified and directed

S&F Mild steel, plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required

M&L for Expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0..9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members wt per sqm n.exc.4 Kg.

1. Surface excavation n. exc 30cm depth and averaging 15cm deep getting out in soft/loose soil. complete all as specified and directed

4. M & L 50mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate as in floor, fair finished.complete all as specified and directed

5. M & L chequered cement concrete tiles with grey cement and pigment 25cm x 25cm x 20mm thick set, jointed and pointed in neat cement slurry. complete all as specified and directed

6. Continous brick edging; with width equal to the length of the brick; laid dry on edge vertically. complete all as specified and directed

7. M & L 15mm thick screed bed or bedding layer of mortor in CM (1:4) for laying floor finishes complete all as specified and directed

Mild steel 8mm dia TMT bars as in reinforcement cut to length bent to shape required including cranking, hooking at ends and binding with mild steel wire (annealed) not less than 0.9mm dia as in stirrups complete all as specified and directed

Use & waste wooden form work (rough finished) to sides of footing, Beams, etc complete all as specified and directed

Formwork to sides of pillars, posts, struts, piers,columns, and stanchions Square, rectangular or polygonal etc. complete all as specified

M&L Reinforced cement concrete (Design mixed M-25) using 20mm graded stone aggregate as in columns, Footings and the like complete all as specified and directed.

M&L Reinforced cement concrete (Design mixed M-25) using 20mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5 metre span and chajjas complete all as specified and directed.

M&L Reinforced cement concrete (Design mixed M-25) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves complete all as specified and directed.

Mild steel framed work of E-165 (Fe-290) as in grills/guard bars shouldered with steel window/ ventilator frames including red oxide primer coat complete all as specified and directed.

S&F Solid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified in clause 8B.3.1 and shown on page 150 of MES Schedule Part-II (2010). complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004) complete all as specified and directed. Make: Rajshri or equivalent as approved by GE.

S&F PTMT butt hinges 100 mm long complete all as specified and directed.

S&F PTMT Tower bolt 150 mm long complete all as specified & directed

S&F PTMT pressed handle 150 mm size oval type stove enamelled black complete all as specified & directed.

M&L Glazed ceramic coloured (colour & shade as approved) tiles non skid of size 300x300x7mm thick as in floor set and jointed in white cement with pigment to match the colour of tiles including 15mm thick screed bed layer of CM (1:6) complete all as specified and directed.

M&L Glazed ceramic coloured (colour & shade as approved) tiles of size 300x200x7mm thick on vertical surface set and jointed in neat cement slurry over 10mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tile.

S&F 500 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs including fittings, complete all as specified and directed.

S&F 20mm bore PTMT ball valve high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed.

Galvanised iron steel water tubing, 15mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed.

Galvanised iron steel water tubing, 20mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed.

S&F Wash hand basin, flat back 550x400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed complete all as specified and directed.

S & F for vitreous china squatting pan of pattern “Orissa Pattern” size 580 mm x 440 mm white with ‘P’ or ‘S’ trap, front or back inlet any pattern including provision of lime concrete bedding etc complete all as directed. Make:-HINDWARE / Parryware

M&L 10 ltr capacity PVC low level flushing cistern syphonic action type with inlet ball valve, float and handle and including bracket and flush pipe complete all as directed. Make:- Parryware (Slimline) / Hindware (Sleek)

S&F 100mm dia cast iron soil, waste and vent pipe, sand cast, in any length with or without ears with connections are fitted/sealed with M-seal including joints fixed to wall complete all as specified and directed.

All as per item No 55 abovebut size 75mm.

S&F cast iron Nahani trap 100 mm dia with gratting including jointing to waste pipe fixed with concrete cement in (1:2:4) type B1 using 20 mm graded stone aggregate etc complete all as directed.

S&F Cast iron floor trap of 100 mm dia, with grating including jointing to waste pipe fixed in cement concrete typee B1 (1:2:4)

S&F High density polythelne pipe of 50 mm bore dia (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc.

S&F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40 gms)

S&F 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified and directed.

S&F bib taps, fancy type CP, screwed for 15mm bore of iron pipe or for brass ferrule and fixed all as specified.

S&F Stop/Angle Valve 15mm bore fancy type CP, Screwed down high pressure, with high pressure crutch or butterfly handle, screwed both ends for iron pipeor union complete all as specified

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified & directed

S&F 125mm dia CP brass shower rose with swivel joints, any colour including shower arm 15mm dia, 195mm long with bend of 45 degree with flange of CP brass complete all as specified and directed.

S&F 15mm bore stop valves of cast copper alloy, screwed down, high pressure with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) complete all as specified and directed.

S& F 15 mm dia Gun-metal, golbe or gate valves, with iron wheel head, screwd both end sor iron pipe and fixed

S& F 20 mm dia Gun-metal, golbe or gate valves, with iron wheel head, screwd both end sor iron pipe and fixed

S&F 600mm long towel rail of PTMT fixed to wall with steel screws and PVC rawl plug complete all as specified and directed.

Brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in CM 1:4.

S&F 150m dia SWG drain pipes laid in trenches and jointed as specified

M&L for concrete bed to drain pipes including paving under and haunching against the sides of pipes afrter they are laid and tested in 150 mm bore at pipe complete.

M&L for providing precast cement concrete type B-1 1:2:4 in manhole cover including necessaryh form work excluding reinforcement and set in CM 1:4 complete

M&L for cement concrete type B-2, 1:2:4 in surface channels and drains complete

Cutting into existing manholes for connecting new drains, making good to pipe aand rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cementt concrete 1:2:4 type B-1 smooth finished, and reforming benching as required internal dia of pipe 150 mm

M&L PCC 1:3:6 type C-2 using 40mm graded stone aggregates as in foundations bed of brick drain mass concrete complete all as specified and directed.

M&L Brick work,using sub class B old size bricks laid on edge in brick floors, bedded and jointed in cement mortar 1:6 and pointed on cement mortar(1:6) as in top of drain complete all as specified and directed.

M&L for Rendering/plastering, 10mm thick in cement mortar (1:4) on concrete surfaces, surfaces finished even and smooth without using extra cement complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped end etc.

M&L RCC pipe 450 mm bore class NP-2 laid and jointed complete with collars, laid in trenches, and tested complete all as specified and directed.

M&L for Cement concrete 1:4:8 type D2 using (40 mm crushed graded stone aggregate) as in packing of Hume Pipe etc.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 15cm and n. exc. 22.5 cm long

Pre painted galvatume aluminum zink coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Pre painted galvatume aluminum zink coating GI based steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F Anodised aluminium snap grid frame work size 605X605 mm for false ceiling all as specified as per specification & drawing

Providding and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions

Pressed steel frames made of 1.25mm thick MS sheet of profile 125x60mm for door and window frames with Double rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and directed.

S&F 35 mm thick, 2nd class hard wood, plain framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particles board medium density wood particle board with comercial face veneers, size of members as specified in clause 8.24 (a) of MES Schedule Part-I section-II complete all as specified and directed.

S&F 35 mm thick,2nd class hard wood, glazed and skeleton shutters open rebated and prepared to receive glass,gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of members of shutters as specified in SSR part-I section 8, clause 8.24 (a) of MES Schedule Part-I Section-8, complete all as specified and directed

Cement concrete (1:2:4), type B-1 using 20mm graded stone aggregate as in bed block of hold fast, coping including necessary form work complete all as specified and directed.

Cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in filling of steel chowkhats including necessary form work complete all as specified and directed.

S&F Factory made box type steel window with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed.

S&F Factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed.

S&F 300mm ordinary rat tail rod pattern springs including rolled and roller plate complete.

S&F 250mm long mild steel, sliding door bolt, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including bolts and nuts complete all as specified and directed.

S&F Mild steel barrel tower bolts, stove enameled black, with bright bolt, 150 mm long and fixed with steel screws complete all as specified and directed.

S&F Mild steel pressed handle, oval type, 125 mm size, stove enameled black and fixed with steel screws, complete all as specified and directed.

S&F glavanised mild steel wire cloth 0.56 nominal dial of wire and average width of aperature and fixed with finned tack or galvanised staple.

M&L for Kota stone slabs, 18-20mm thick, machine cut as in flooring of size not less than 0.25 Square metre each, set and jointed in cement slurry over & including screed bed of 20 mm thick in cement mortar (1:6) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and polishing (mirror type) complete all as specified and directed.

Decorative mild steel coloured curtain rod of 20 mm dia powder coated approved pattern & design including side cups & powder coated mild steel flat iron brackets fixed with steel screws & PVC rawl plugs complete all as specified and directed.

Preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

1. Excavating in post holes (or similer holes) each n. exc. 0.5 Cum. Getting out returning, filling in and ramming earth or broken rubble mixed with earth around in layer not exc.25 cm. hard/dense soil.

3. S&F Steel work in tubular trusses incl. special shaped washers etc. complete using ERW or induction butt welded tubes conforming to IS 11614-1979 grade St-240.

Sruface dressing n exc 15 cm deep in soft/lose soil all as specified and directed

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.

S&F Glass dividing strips, 3mm thick width of strip 38 mm complete all as specified and directed

S&F Aluminium tower bolt of extruded section, 200mm length of bolt and fixed with screws, complete all as specified and directed.

S&F 125mm size, aluminium (cast type) anodized, handle and fixed with screws complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm (nominal area), PVC insulated, FRLS multistranded, single core unsheathed, copper conductor cables drawn through and including PVC conduit with all accessories concealled in wall and fixed to ceiling etc. with and including 1.5 Sqmm (nominal area) PVC insulated, unsheathed,multi stranded, single core, copper cable green in colour as earth continuity wire connecting to common earth dolly including sunken boxes of suitable size with 3 mm thick hylam sheet top cover fixed with suitable size of brass screws for mounting switches, sockets, regulators etc. (a) One light point / fan point/ Exhaust point controlled by one single pole one way switch.

All as per item No 110 above but One 3 pin socket outlet 5 amps independent board with cable 1.5 Sqmm size

All as per item No 110 above but One 3 pin socket outlet 5 amps on the same board with other switches with cable 1.5 Sqmm size

All as per item No 110 above but one 15 Amps socket outlet point controlled by one single pole switch one way and wiring with 2.5 Sqmm PVC insulated,stranded,unsheated copper conductor on independednt board with continuous earth wire of size 2.5 Sqmm green colours PVC insulated, unsheathed,stranded copper conductor cable.

S&F Glint Switch piano modular flush type of single module, 6 amps, single pole one way made up of Polycarbonate FR material, duly ISI marked complete all as specified. Make- INDOASIAN cat part No-800000.

S&F Glint Switch piano modular flush type of single module, 16 amps, single pole one way made up of Polycarbonate FR material, duly ISI marked complete all as specified. Make- INDOASIAN cat part No-800002.

S&F Glint modular Socket, 6 Amps 2/3 pin combined universal type of 2 module, pencil free operation with child safety shutter made up of Polycarbonate FR material, duly ISI marked, complete all as specified. Make- INDOASIAN cat part no-800020

S&F Glint modular Socket, 6 /16 Amps 2/3 pin combined universal type of 2 module, pencil free operation with child safety shutter made up of Polycarbonate FR material, duly ISI marked, complete all as specified. Make- INDOASIAN cat part no-800022

S&F Ceiling rose surface type, 240 volts, 50 Hz, 6A, Pilot 3 plate, white in colour, bakelite 65 x 50mm, 3 terminals duly ISI marked complete all as specified and directed. Make - Anchor, Model- Penta Cherry, Cat Part No-39040 or equivalent in Plaza/ INDOASIAN.

S&F Glint fan regulator, electronic step type 100W capacity, of single module, single pole made up of Polycarbonate FR material, duly ISI marked. Make-INDOASIAN cap part no-800041

S&F Lamp angle holder (Plastic Ring), 240 volts, 50 Hz, 6A, white in colour, duly ISI marked complete all as specified and directed. Make - Anchor, Model- Penta Cherry, Cat Part No-39527 or equivalent in Plaza/ INDOASIAN.

S&F LED bulb of 10 watt all as specified and directed. Make-Havells, Model No-LED ADORE 10W B22 CDL BALL LAMP or Equivalent in PS.

S&F LED 20 W LED 6000 K, indoor E-Lite LED Curve with wide angle profile. High lumen batten with efficacy of 100 Lumens, energy efficient fixed to wall/ ceiling etc complete. Make-Havells, Model-E-Lite LED Curve (LHEXBXPNIN1W020) or Equivalent of Philips/C&S.

S&F ceiling fan 1200mm sweep, AC single phase 230 Volts 50Hz including provision of flexible cable 3 core copper conductor of size 23/0.0076 of suitable length from ceiling rose to ceiling fan connector and all hanging arrangement compete without regulator all as specified and as directed. Make-Orient, Model- TWISTER HI-SPEED or equivalant in Crompton/ Havells

S&F exhaust fan heavy duty with louvers complete of sweep size 300mm, 900 RPM, single phase, with bolts, nuts and washers, size of the bolt 15 cm long 12mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/00.0076 three core from ceiling rose to exhaust fan max 1.5 mtr for giving connection complete all as specified. Make:-Crompton, Model.EXHD300-6-1 or equivalent in Khaitan/CG/Bajaj

S&F sheet metal enclosures Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amp techno for 25 Ltrs cap Geysers compete all as specifed. Make- HPL, Cat Part No-MDBSPMT20 or equivalent in INDOASIAN/ C&S/ Legrand/ Havells

S&F Sheet metal enclosures doubledoor, factory made, made out of CRCA mild steel sheet 1.2 mm thick with matellic painting, IP-42 protection surface mounting 240 volts, 8 way dust and vermin proof suitable for incorporation of Isolator / MCBs. duly concealed in wall and making good the distrubed surface and colour matching complete all as specified.

S&F MCB SPN, 40 Amps, 240 volts,"C" series, 10KA duly ISI marked, complete all as specified. Make- HPL, Cat Part No-NTSPNC40 or equivalent in INDOASIAN.

S&F MCB single pole 240 volts, 06 to 32 Amps,"B" series, 10 KA complete all as specified. Make- HPL, Cat Part No-NTSPB6-32 or equivalent in INDOASIAN.

S&F desert cooler electric driven single phase with working voltage 240 Volts, 50 Hz of capacity 4000 cum/Hour complete all as specified and directed.

S&F stationary water heater (Geyser) vertical storage type, electric driven, closed vented type (5 star rated marked) of capacity 25 Ltrs, including provision of bolts, nuts and washers, size of the bolt 15 cm long 12mm dia embedded in the wall complete all as specified. Make-Havells, Model No-NaZZ, Part No. GHWENZTWG025 of Havells or equivalent in CG, Bajaj, Recold.

S & F bldg LED Security light fittings 40 watts including GI bracket bend to shape made out of GI pipe light grade of suitable size up to 1.2 mtr long etc complete with MS clamps duly painted with two coats of aluminium paint with nuts/bolts/washers and all fixing arrangements to pole/wall including connecting up with 2 core cable all as specified and directed. Make- Crompton, Model-FREEDOM+, Cat Part No-LSTS-40-CDL or Equivalent of Havells/Bajaj.

Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc as required 4 mm dia galvanised iron or steel wire.

S&F Switch piano flush type 6 amps, single pole one way, white in colour, duly ISI marked complete all as specified and directed. Make - Anchor, Model- Penta Cherry, Cat Part No-14121 or equivalent in Plaza/ INDOASIAN.

S&F Bldg Security light fittings LED 25 watts, including GI bracket bend to shape made out of GI pipe light grade of suitable size up to 1.2 mtr long etc complete with MS clamps made of 25x3mm MS plate, duly painted with two coats of aluminium paint with nuts/ bolts/ washers and all fixing arrangements to wall/ pole, including connecting up with 2 core copper flexible wire all as specified and directed. Make- Crompton, Model-ASTRA NEO, Cat Part No-LSTS-25-CDL-M or equivalent in Havells/ Bajaj.

M&L for Sub main wiring with two single core 2x4 sqmm PVC FRLS insulated and unsheathed stranded copper conductor alongwith earth wire 2.5 sqmm drawn in PVC rigid conduit connected to main board complete all as specified and directed (Two runs cable and one number earth wire and suitable PVC conduit shall measured together as unit length).

S&F Non return valve suitable for 15 mm bore pipe, complete all as specified.

Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shallbe provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC (1:3:6) type C-2 using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate and MS angle iron 50 x 50 x 6 mm frame including two coats of painting over a red oxide to exposed steel surfaces. excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mtr as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009) .

Supplying, laying, jointing and testing XLPE insulated, armoured, electric cables (heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 25 sqmm 2 core confirming to IS:7098-1985 laid in trenches, in floor, in duct, through pipes or along the pole complete all as specified.

M&L Dry and clean fine sand for cable cushioning to underground cable protection, complete all as specified. (Excavation and earth work measured separately). Note- Punned down thickness shall be measured.

M&L for old size sub class 'B' bricks laid in trenches over the cable with length of brick perpendicular to the direction of cable, adjacent/ abutting each other, complete all as specified and directed. (Excavation and earth work to be measured and paid for separately).

M&L for galvanised steel pipe, light grade, ISI marked 40 mm nominal bore dia for passing of cable, fixed to poles/ walls, laid under floor/ road crossings, complete with and including clamps socket & elbow etc complete all as specified.

M&L for cutting of existing GI tubing 40mm dia for making new conncetion, inserting equal Tee 40X40X40mm dia including excavation, returning filling complete and all as directed and specified.

Supply and laying GI tubing medium grade galvanised of size 40mm bore laid on floor/ceiling including all fittings and short pieces complete all as directed by Engineer-in-Charge.

Supply and laying GI tubing medium grade galvanised of size 25mm bore laid on floor/ceiling including all fittings and short pieces complete all as directed by Engineer-in-Charge.

Supply and fix Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of 25mm bore complete all as specified.

M/S Yashpaul Gulati

S S BUILDERS

M/s Mukand Lal Khanna