REPAIR/REPLACEMENT OF INTERNAL ELECTRIFICATION AND CONNECTED WORK IN OTM AND MD ACCN OF ZONE-II UNDER GE(SOUTH) MEERUT CANTT

Amount

Taking down carefully any type of battens or conduit point wiring without batten/conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as directed by Engineer - in - Charge.

All as per item No 1.00 above but including conduit and accessories.

Material and labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, unsheathed, copper conductor cable in existing PVC / MS concealed conduit of any size/dia complete with all accessories/fittings, brass screws, washer etc, sunk zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for One light/Bulb point/bell point controlled by one, one way switch 05 / 06 Amps.

All as per item No 3.00 above but One ceiling/exhaust/wall fan point controlled by one, one way switch 05 / 06 Amps.

All as per item No 3.00 above but One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch.

All as per item No 3.00 above but One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch.

All as per item No 3.00 above but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board.

Material & labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLS PVC insulated, unsheathed copper conductor cable in and including PVC concealed conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc, sunk zinc coated pressed steel terminal boxes including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for One light/bulb/Bell point controlled by one, one way switch 05 / 06 Amps.

All as per item No 8.00 above but One ceiling fan/exhaust fan point controlled by one, one way switch 05/06 Amps.

All as per item No 8.00 above but One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch.

All as per item No 8.00 above but One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch.

All as per item No 8.00 above but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board.

Supply & fixing switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified.

Supply & fixing socket outlet 5 pin, 05 / 06 Amps flush type 240 volts complete all as specified & directed .

Supply & fixing switch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified .

Supply & fixing of socket outlet 3 pin, 05 / 06 Amps and 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified .

Supply and fixing bell push flush type , 5 amps , 240 volts complete all as specified & directed.

Supply and fixing door bell ding dong type , 240 volts AC complete all as specified & directed .

Supply and fixing stepped type electronic fan regulator flush type AC, 230 volts, complete all as specified & directed.

Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate for batten fitting all as specified and directed by Engr-in-Charge .

Supply and fix decorative LED Tube light fitting 1x20 Watt , with opal diffuser, environmental friendly, energy efficient MS batten with retrofit T8 polycarbonate tube-01 No having single side connection complete with all accessories and fixing material all as specified and directed by Engr-in-Charge. Make:- Havells Model No- PHOTONULTRAE2.01213T8SSTL20WLED865SPC+ STREAKT8UPT01X22WSSBSWH OR equivalent in Crompton/ Wipro/C&S/Surya

Supplying and fixing LED tube light fitting 9/10 watt for Mirror light surface mounted,with extruded polycarbonate , integrated lamp & driver , with opal diffuser and decorative end plates.complete with acessories all as specified and directed by Engr-in-Charge. Make Havells Cat Part No LUMELINEBS9WLED865SPCWH or equivalent CROMPTON/ Bajaj/ Wipro

Supplying and fixing LED bulk head light fitting wall mounted with inbuilt edge lit LED 10 watt, complete with all acessories all as specified and directed by Engr-in-Charge. Make- Havells, Model HEXAFT10WLED857SSYMBOPC / CROMPTON Model LBHP-10CDL or equivalent in Phillips/ Wipro.

Supply & fixing of ceiling rose, 3 terminal /PVC/polycarbonate isolated body complete all as specified & directed by Engineer -in- Charge.

Supply and fix LED lamp 9/10 watt .

Taking down carefully unserviceable sub main wiring of any size and type, removing material from site for taking credit and making good the disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed by Engineer - in - Charge.

Material and labour for sub main wiring with 2x6 Sqmm nominal cross sectional area (two single core cable of 6 Sqmm for Phase and neutral + 01 single core cable of 6.0 Sqmm for earth wire), 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable FRLS with and including continuous earth wire of size 6.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dully including taking down old sub main wiring and all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed. (Note : 01 Meter of conduit alongwith 2x6.00 Sqmm wire +1x6.00 Sqmm earth wire shall be measured as unit length)

All as per item No 27.00 above but by using two single core cable of 4 Sqmm for Phase and neutral + 1 single core cable of 4 Sqmm for earth wire (Note : 01 Meter of conduit alongwith 2x4.00 Sqmm wire +1x4.00 Sqmm earth wire shall be measured as unit length)

All as per item No 27.00 above but by using two single core cable of 2.5 Sqmm for Phase and neutral + 1 single core cable of 2.5 Sqmm for earth wire (Note : 01 Meter of conduit alongwith 2x2.5 Sqmm wire +1x2.5 Sqmm earth wire shall be measured as unit length)

DAll as per item No 27.00 above but by using two single core cable of 10 Sqmm for Phase and neutral + 1 single core cable of 10 Sqmm for earth wire (Note : 01 Meter of conduit alongwith 2x10.00 Sqmm wire +1x10.00 Sqmm earth wire shall be measured as unit length)

Supply and fixing in replacement 1100 volts grade heavy duty cable PVC insulated aluminium conductor 10 Sqmm, 2 core, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4 mm suspension wire, two single core cable flat or circular connection complete all as specified and directed.

Taking down carefully unserviceable distribution board of any capacity including wooden board and making good the disturbed surfaces of walls, etc including two coats of white / colour washing / distempering etc to match the existing complete all as directed by Engineer - in - Charge.

Supply and fixing in repair sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way SPN, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as directed by Engineer - in - Charge.

All as per item No 33.00 above but of size 12 way SPN.

All as per item No 33.00 above but of size 4 way SPN.

Supply and fixingin repair sheet metal enclosure, Triple pole and neutral AC, 415 volts, 04 way, double door with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection including provision of four pole Isolator/MCB as incomer, flush to wall including all cutting etc on wall and making good including two coats of white / colour washing / distempering etc to match the existing disturbed surfaces complete all as directed by Engineer - in - Charge.

Supply and fixing in repair Vertical Loadline sheet metal enclosure double door, Triple pole and neutral (TP&N vertical loadline) AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection, with and including 100 Amp MCCB, 4Pole, 16kA with adjustable thermal and magnetic setting suitable to fix in VTPN DB and having provison for fixing of 1 No MCCB 4P as Incomer and 12 Nos MCB SP inside of DB, with metal door and flush to wall including grouting and cutting in existing wall and making good disturbed surface with two coats of white / colour washing / distempering etc to match the existing one complete all as directed by Engineer - in - Charge. Make Legrand/ABB/ Schneider/Havells.

Supply and fixing in repair MCB, SP, AC, 240 volts "B" series of capacity 06 to 32 Amps, 10kA and making connections complete all as specified & directed.

Supply & fixing MCB, DP (Double Pole), AC, 240 volts, B series capacity 40 Amps to 63 Amps 10kA and making connections complete all as specified & directed.

Supply & fix Isolator 4 Pole 'B' series 100 amps capacity AC 415 V,10kA complete all as specified and directed.

Supply & fix Isolator 4 Pole 'B' series 63 amps capacity AC 415 V,10kA complete all as specified and directed .

M & L for MCCB 4 pole 200 A, 415 V AC, 50 Hz, 25 kA breaking capacity, adjuctable thermal and magnetic setting complete all as specified and directed by Engineer - in - Charge .

M & L for MCCB 4 pole 100 A 16 kA breaking capacity, adjuctable thermal and magnetic setting complete ass as specified and directed by Engineer - in - Charge

Supply & fixing in repair industrial type SPN enclosure with a two pin and earth plug and socket complete with and including 20 Amps MCB, single pole, AC, 240 volts and flush to wall including all cuttings & chases etc on wall and making good including two coats of white / colour washing / distempering etc to match the existing disturbed surfaces complete all as directed by Engineer - in - Charge.

Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed.

Taking down carefully under ground cable of any size and making good to disturbed surface as per existing complete all as specified and directed.

Supply, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 25 Sqmm 3.5 core armoured, PVC sheathed with aluminium conductor heavy duty laid in trenches/fixing on wall or surface/under road crossing through protection pipe light grade GI pipe 40mm bore etc complete all as specified and directed.

All as per item No 47.00 above but 16 Sqmm 2 core.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 M depth in soft / loose soil and geting out complete all as specified and directed.

Material and labour for sand cushioning with dry fine sand including filling, spreading, levelling in layers in cable trench with approved quality of sand for protection of under ground cable complete all as specified and directed.

Material and labour for continuous brick edging using fly bricks with width equal to the length of the brick of whole sub class 'B' bricks laid on edge complete all as specified and directed.

Supplly laying and fixing 40 mm bore galvanised steel tubes, light grade with all fittings, laid in trenches for cable protection complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n. exc. 25 cm thick in soft / loose soil complete all as specified and directed.

Removing surplus excavated materials n.exc. 50 Mtr and depositing where directed at a level n. exc. 1.5 Mtr above the starting point complete all as specified and directed.

Supply and fix in repair decorative LED Tube light fitting 1x20 Watt , with opal diffuser, environmental friendly, energy efficient MS batten with retrofit T8 polycarbonate tube-01 No having single side connection complete with all accessories and fixing material all as specified and directed by Engr-in-Charge. Make:- Havells Model No- PHOTONULTRAE2.01213T8SSTL20WLED865SPC+ STREAKT8UPT01X22WSSBSWH OR equivalent in C&S/SURYA/Bajaj.

Supply and fix in replacement LED lamp 9/10 watt of make:- Havells /Phillips/ Crompton.

Supplying and fixing in repir LED tube light fitting 9/10 watt surface mounted,with extruded polycarbonate , integrated lamp & driver , with opal diffuser and decorative end plates.complete with acessories all as specified and directed by Engr-in-Charge. Make Havells Cat Part No LUMELINEBS9WLED865SPCWH or equivalent in CROMPTON/ Bajaj/Wipro

Supply and fixing in replacement of wall mounted polycarbonate fancy light suitable for 9/10 watt LED Bulb and including 9/10 Led Bulb . (frame and light) complete all as specified & directed.make - Phillips , Model no - Comet 30575 or equivalent in Havells/C&S/Surya/Bajaj/crompton

Supply and installed LED security light fitting 1x45 Watt luminaries including taking down existing old security light fittings with pressure die cast aluminium housing comprising high power LEDs enclosed with lens embedded PC cover with LED driver complete IP 65 protection. : Make:- Havells Model No- ENDURA CITYLITE PLATINUM PLUS or equivalent in Crompton /Bajaj/Surya.

All as per item No 59.00 above but capacity 25 watt. : Make:- Havells Model no- VILUMINASL25WLED757SASYBOPC or equivalent in Crompton / Bajaj / Suryas.

Supply and fix in repair, security light brackets of 32 mm dia GI pipe medium grade upto 0.9 mtr long bend to shape at 100-120 degree including flat iron clamps and Suitable nuts and bolts grouted in wall including all material required for fitting, including matching the surface with existing all as specified and directed by EIC.

Supplying and fixing recess mounting LED 2X2 luminaire 36 W CRCA powder coating housing with anti-glare diffuser new deep back lit panel metallic frame, including all acessories all as specified and directed by Engr-in-Charge. Make-Havells Model no- PLANO REC 2X2 36 W or equIvalent make in crompton/ wipro/ C&S

Supplying and fixing in repair LED bulk head light fitting wall mounted with inbuilt edge lit LED 10 watt, complete with all acessories all as specified and directed by Engr-in-Charge Make- Havells, Model HEXA 10 W or equivalent in Wipro/ Crompton.

Supply and fix in repairs Round surafce/racess mounted LED down light 10 watts with aluminium housing and frosted cover.Make Havells INTEGRA NEO or equivalent in Crompton/Bajaj/ Surya.

Supply and fix LED Tube Rod 1x20 Watt suitable for MS batten with retrofit T8 polycarbonate tube with single side connection, complete with all accessories including making connection and alteration in wiring as required all as specified and directed by Engr-in-Charge.

Supply and fix LED Tube Rod1x20 Watt suitable for MS batten with retrofit T8 polycarbonate tube with double side connection, complete with all accessories including making connection and alteration in wiring as required all as specified and directed by Engr-in-Charge.

Supply and fix in repair LED PL-L lamp , 4 pin , 18watt, suitable for installation in existing 4 pin lamp holder .

Supply and fixing in repair LED POST TOP LANTERN 25 W including all accessories for fixing complete all as specified and directed by Engineer-in-Charge. Make -Havells , Model No- RUBYPT25WLED757PSYMTOPC or equivalent in /Bajaj/Philips/Compton

Supply and fix in repair switch piano flush type, 05 / 06 Amps single pole, one way 240 volts including all necessary items such as screw, nut and bolt, connector, flexible copper wire 1.5/2.5 Sqmm size etc including checking / testing completer all as specified & directed by Engr-in-Charge

All as per Item No 69.00 above but Socket outlet 5 pin, 05 / 06 Amps flush type 240 volts complete all as specified & directed by Engr-in-Charge .

All as per Item No 69.00 above but switch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified & directed by Engr-in-Charge

All as per Item No 69.00 above but socket outlet 3 pin, 05 / 06 Amps and 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified & directed

All as per Item No 69.00 above but bell push flush type , 5 amps , 240 volts complete all as specified & directed

All as per Item No 69.00 above but door bell ding dong type , 240 volts AC complete all as specified & directed

Supply and fix in repair steped type electronic fan regulator flush type on the existing sheet etc. AC, 230 volts complete all as specified & directed

All as per Item No 69.00 above but lamp holder (Angular / Straight), insulated body, with back plate for batten fitting complete all as specified and directed .

All as per Item No 69.00 above but modular switch one way 06 Amps,1 module, 240 volts complete all as specified & directed .

All as per Item No 69.00 above but modular switch one way 16 Amps,1 module, 240 volts complete all as specified & directed.

All as per Item No 69.00 above but modular socket one way 6 Amps,2/3 pin combined ,2 module, 240 volts complete all as specified & directed .

All as per Item No 69.00 above but modular socket one way 6/16 Amps,2/3 pin combined ,2 module, 240 volts complete all as specified & directed .

All as per Item No 69.00 above but modular Bell Push 6A,(1 or 2 module), 240 volts complete all as specified & directed.

All as per Item No 69 above but modular fan step regulator socket type complete all as specified & directed .

Supply & fixing in replacement of modular white cover plate with frame,3 module, 240 volts complete all as specified & directed .

Supply & fixing in replacement of modular white cover plate with frame,4 module, 240 volts complete all as specified & directed.

Supply & fixing in replacement of modular white cover plate with frame,6 module, 240 volts complete all as specified & directed .

Supply & fixing in replacement of modular white cover plate with frame,8 module, 240 volts complete all as specified & directed .

M/L for fixing in repair pressed steel terminal box 60 mm deep with 3 mm thick laminated sheet on top for mounting switch/socket/ regulator incl taking out old box & making good the disturbed surface as per existing of the size 75x75 mm complete all as specified and directed.

All as per item No 87.00 above but size 100x100 mm

All as per item No 87.00 above but size 150x75 mm

All as per item No 87.00 above but size 175x100mm

All as per item No 87.00 above but size 200x150mm

Supply & Fix in repairs LED driver suitable for 25 w LED security lights as per existing Make & Model at site .

Supply & Fix in repairs LED driver suitable for 45 w LED security lights as per existing Make & Model at site.

Supply & Fix in repairs LED driver suitable for 36/42 w LED Panel light fitting 60cm x 60cm as per existing Make & Model as per site requirement.

Supply and fix in repair fan capacitor 2.5 MFD, single phase, 230 V.

Supply and fix in repair LED PL-L lamp , 9 watt, suitable for installation in existing lamp holder.

Supply and fix in replacement LED bulb 0.5W WHITE with base cap B22, Product Code - N10001.

Supply and fix in replacement LED bulb 0.5W RED with base cap B22, Product Code - N10001.

Supply and fix in replacement LED bulb 0.5W GREEN with base cap B22, Product Code - N10001.

Supply only incandescent lamp 100W with base cap B22, Model- LONGLITE, Product Code - G02100.

Supply and fix inreplacement emergency bulb 9W, lumen output 6500K, with inbuilt rechargeable battery of capacity 2200mAH with base cap B22, Product Code - NE9001.

Supply and installed LED Flood light 60 watt energy saving, environment friendly, long life, die cast aluminium housing comprising high power LEDs as light source including all needed accessories to fix it on wall/Tree/pole.. : Make:- Havells Model No- JETA QUANTO PLUS, Cat Part No. JETAQUANTOPLUSFLP60WLED757SYMLENS or equivalent Crompton/ Phillips/SURYA/Bajaj

M/L for fixing in repair Metal Flush box made of G.I Sheet having Earth Terminal for safety incl taking out old box and making good the disturbed surface as per existing of the size of metal flush box of 3 module

All as per item No 103.00 above but size of metal flush box of 6 Module

All as per item No 103.00 above but size of metal flush box of 8 Module

Material and labour for fixing in repair modular blank plates 1 module. .

Supply & fixing in repair LED batten fitting suitable for T8 LED tube rod upto 22W for single LED tube, epoxy powder coated white after phosphochromate treatment for rust free long life, for fixing on wall/ceiling with help of screws at a distance of 600mm distance, including complete internal wiring suuitable for retrofit tube light with single side connection, Model - STREAK, SAP Code - STREAK8UPTO1X22WSSBSWH, Make : Havells or equivalent in C&S/SURYA/Bajaj/Crompton

Supply & fixing in repair LED batten fitting suitable for T8 LED tube rod upto 22W for single LED tube, epoxy powder coated white after phosphochromate treatment for rust free long life, for fixing on wall/ceiling with help of screws at a distance of 600mm distance, including complete internal wiring suuitable for retrofit tube light with double side connection complete all as specified and directed.

Manish Enterprises

Jain Traders

vibha associates